Used Sawing and cutting for sale (154)

Condition: good (used), Esterer SS45 full gang saw was technically completely overhauled Only visually the gate is no longer beautiful Passage 45 cm 340 upm 500 stroke with complete hanging, saw blades and Templates with hydraulic roller lifting Itsdpjfvb Etofx Aacsn with splitting wedge with drive power 30 kW with hydraulic power pack with complete switch cabinet Please also visit my other advertisements. I look forward to your inquiry.

Condition: good (used), functionality: fully functional, Passage height 160 mm Ijdpowx Hrwjfx Aacjtn Passage width 800 mm Feed speed steplessly adjustable 0–70 m/min Hydraulic width adjustment with pneumatic cylinder, electrically adjustable, Drive motor Siemens 50 kW with V-belt drive, Wood infeed and outfeed table, The machine has been technically inspected and is in working condition.

Year of construction: 2011, condition: like new (used), For sale is 1 roller conveyor incl. one geared motor each: Itedpfoihpn Nox Aacjn Technical data: Year of construction: 2011 Length: 12,75m Width: 1.40m Height: 1.00m Loading: 4 tons possible Gear motor per roller conveyor: SEW-EURODRIVE R87 DREE90L4 (for further details see picture on the type plate) Three of the four roller conveyors have a wooden wall on one side over the entire length and one roller conveyor has a side wooden wall with a length of 5.20! Two of the four roller conveyors are each equipped with 3 lateral removal systems. (see pictures)

Condition: good (used), Year of construction: 1994, - quantity of knives 4 - lenght of knives 720 mm Itsdpew U Diwsfx Aacen - diameter of drum 900 mm

Condition: good (used), overall weight: 580 kg, Equipment: documentation/manual, About the item Ijdpfx Aow Ucwaoacetn WALTER FD2/250 – Double Saw Formatting Machine Wide chain spacing (cutting width from 116 cm to 130 cm) Comes with technical documentation (DTR). Two new 400 mm saw blades included for free. GOOD CONDITION NET PRICE

Condition: used, Costa multi-blade saw -Type Lince -max. cutting height 140mm Itedpovw Rpljfx Aacen -motor 30kW

Year of construction: 2006, condition: used, - cutting height (mm): 200 - Cutting width (mm:) 200 Itedpfxsm E Uf As Aacjn

Condition: good (used), board edging installation with entrance and tunnel 1. Manual entrance with roller conveyor 2.Board edger : Brand : REMMONAY Year : 1996 Drive: 1 x 132 kW 4 variable saws and 1 fixed arm (4 variable products) Lasers Siemens touch screen with division Cutting depth (mm) 18 - 120 mm Max length : 6m 3. side products separator with tunnel 4. Long boards (up to 12,50m) cutting station with entrance deck, cutting saw, ejection and conveyor to bring the cut board (< 6m) to the edger loading deck 5. Electric cabinet Itjdpfjpug Dhsx Aacen Everything is in operation on a daily basis in our sawmill until beginning of 2024

Condition: ready for operation (used), 03. gang saw Pini and Kay VU 65 HH e Itsdpfx Aoh Ict Ejacen with splitting wedge with drive motor 45 kW with countershaft with saw blades with saw clamp with hook with templates with blower Location: Austria, near Steyr

Year of construction: 2024, condition: new, - 260 mm cutting height - 750 mm cutting width - 5-30 m/min stepless feed - 2x75 sawing motors Itodpfx Asvdahwsacon - 3 KW feed gearbox - 70 mm soindle diameter - 400 mm sawblade diameter - 5000 Kg weight

Year of construction: 2013, condition: excellent (used), HewSaw Veisto CRS 250, rip saw in good condition, complete with control cabinet Iodpoxbic Iefx Aacstn

Condition: used, Year of construction: 1998, LBL Brenta Oxia Itsdjvw Rnbepfx Aacen -max. cutting height 150mm -max. passage width 1000mm -multi-blade saw with fixed saw attachment

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Double hemmer and circular saw with electronic control consisting of: Linck curved conveyor for separating boards and models, very stable RET straightening and feed table. Chain bed in front of the machine with pressure roller that can be raised and lowered. Itjdpfx Aswn D Izjacsn Laser unit. DK 90 L 1000: passage width 1000 mm. Cutting height 125 mm. Feed frequency-controlled up to 100 m / min. Automatic roller height adjustment with roller pressure. Width adjustment hydraulic, electronic positioning control with the following setting options: Continuous, cm-locking and switchable 2 cm-locking. Cutting width between the flanges 24 - 440 mm. 10 changeable fixed dimensions, direct dimension input in mm. Constant dimension allowance, shrinkage dimension allowance as a percentage. Separating wedge pair 1x zero line, 1 x separately hydraulically adjustable, with electronic positioning control. Separating wedge opening 48 - 600 mm. Chain bed on the cut-out side. 90 KW motor with power belt drive. Hydraulic unit. Splinter separator ASV DK II with 2 separating lamellas. Electrical control cabinet with power unit and PLC control. Control panel. Slatted bushing 403 mm clamping length. Adjustment and zero bushing. Professionally dismantled and loaded onto a truck free of charge.

Condition: good (used), Year of construction: 1996, functionality: fully functional, power: 55 kW (74.78 HP), Rennepont edger Retractable machine for sawing long rafters in a single pass. Adjustable rafter sizes: 60/80, 80/80, 80/100, 80/120, 100/100, 100/120 Hydraulic quill Year 1996 Power: 55kW + 15kW hydraulic pump Iedpfjqx N A Sjx Aacotn Still in operation in our sawmill until early 2024.

Condition: used, Trimming Saw / Edging Line / Twin Edger with Automatic Scanning and Adjustment consisting of: Board Infeed: * Roof chain cross conveyor (behind the frame saw roller table) * Transfer table to S-conveyor * S-conveyor Cant Infeed: * Vertical lift * Roller conveyor * Lowerable cross conveyor Trimming Machine: * Infeed table / cross-cutting table * Optimes automatic edger infeed table with 4-sided scanning system * Esterer BNK circular saw for trimming * 2-strip slat separator * Outfeed table (main product to the right, side boards to the left) Technical data – Optimes BNK: 3 saw blades adjustable Cutting height: 160 mm Max. board length: 8 m Motor power: 2 x 90 kW Year of manufacture: 1987 The trimming line is located in Germany, between Augsburg and Stuttgart, in a smaller sawmill with an annual cutting volume of approx. 15,000 solid cubic meters. Maintenance and servicing have always been carried out properly. Adjustment shafts, infeed table + chains, gears, two drive motors, and the drive chains have all been completely replaced or renewed. Iodpsw Dn Ecjfx Aacotn Inspection during ongoing operation is possible at any time.

Year of construction: 2025, condition: new, functionality: fully functional, - 350 mm max. cutting height - 75-250 mm min/max Cutting width Iedpfx Aohkh Npeacjtn - 100 - 350 mm min/max logs - 18-80 mm side board - 1,8 - 6m Cutting length - 550 mm saw blade diameter - 4/6 saw cuts simultaneously - 5-30 m/min variable feed speed - 2x30 KW and 2x22 KW saw motors - 3 KW SEW feed gear motor - automatic 6-fold width adjustment - infeed table with 3 fold turning device - 2 centering roller pairs pneumatic pressure - driven infeed roller with 0,75 KW and pneumatic pressure - 2 driven outfeed roller pairs with 0,55 KW each - 4 pneumatic pressure roller pairs in the outfeed

Year of construction: 2022, condition: new, New carbide circular saw blades to Costa 505 x 4.0/2.6 x 120 mm 4 side holes pitch circle 155 mm Itedpfx Aask Ruhhjcon 8 side holes pitch circle 235 mm approx. 30 pieces for sale

Condition: new, Year of construction: 2025, functionality: fully functional, cutting height (max.): 1,000 mm, cutting width (max.): 1,000 mm, cutting length (max.): 10,000 mm, power: 23.8 kW (32.36 HP), saw blade diameter: 700 mm, overall weight: 3,800 kg, Equipment: motor brake, The horisontal circular saw mill is designed for the production of radial sawn edged boards and beams from coniferous and hardwood logs by longitudinal sawing with two circular saws in both directions (without idling) at an angle of 90 °. Sawing is performing by movable carriage which is running alongside a fixed log. The log sawing scheme is chosen by the operator individually, based on the shift task and rational log cutting optimization, depending on its diameter. DISTINCTIVE FEATURES: - No need for logs sorting; - Individual sawing scheme for each log; - The possibility of sawing logs with a diameter of 150 to 1000 mm; - Efficient output up to 70%; - High productivity – up to 20 m³/shift (counting by raw roundwood). SPECIFICATION: Dimensions (for a cutting length of 6 m): Length: 3320 mm Width: 2220 mmHight: 2130 mm Track length: 13380 mm Cutting parameters: Max. log diameter: 1000 mm Min.log length: 2000 mm Max. dimension of the cut element: 200 x 200 mm (possibility of increasing the dimension 270x240) Circular saw diameter: 450 - 700 mm Motors: Main motors power x2: 12 - 23,8 kW Shaft rotation speed: 1400 rpm Feeding system Feeding motor power: 1,5 kW Feeding motor rotational speed: 1450 rpm Feeding speed: 0-30 m / min *Using saws with a diameter of ø 450 mm, we can get a size max. 150x150 mm, with a saws with a diameter of 550 mm we get max. 200x200 mm, and in the version with a saw ø 630 we get a size of 240x240 mm., With a saw ø 700 the get an ability to increase the size to 270x240. Iodpfx Aasv D Rwvocjtn

Condition: excellent (used), cutting width (max.): 700 mm, cutting height (max.): 120 mm, Right-hand machine, machine number 188 Electrically adjustable hydraulic width adjustment Infinitely variable feed rate from 0-80 m/min 37 kW drive motor with V-belt pulley, motor tensioning rail, Various saw heads, shims, and saws Infeed table with individual trestles Fixed outfeed table Itodpsv Raqxefx Aacon The machine has been completely overhauled and is in excellent condition.

Year of construction: 2005, condition: excellent (used), The subject of the auction is the sawmill line BRODPOL Itjdpfxel H Hy Hs Aacjn The line consists of a log prefeeder plus a cascade, an input feeder, a BRODPOL TT5/500/320/G circular sawmill with a centering device and a receiver, and a distribution table. - diameter of the processed log 100 - 320 mm - length of processed log 1250 mm - 6000 mm - diameter of circular saws (only) 500 mm - maximum number of saws on the spindle 5 pcs. - feed speed 10 - 28 m/min. - power of main motors 55 kW + 75 kW Hcwgak9s - required connection of pneumatic supply 6 atm. - capacity up to 20 m³ per hour of operation

Condition: used, functionality: fully functional, We have a used Ahlström edger available for sale. It is in full working condition and comes complete with a set of blades/cutters. Itsdpsxa Akpsfx Aacon

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 03013, BERCAR plank cutter, maximum cutting length 1100mm, maximum cutting height 170mm. 10 hp engine. Itsdpfx Aajvvpb Rjcsn

Condition: excellent (used), functionality: fully functional, Möhringer splitting wedge with large opening and pressure roller. Can also be adjusted across the center. Iodjv Tbxpepfx Aacetn

Condition: like new (used), Log circular saw, for diameter until 1100mm Itsdpfxsi Ek Hpj Aacon

Year of construction: 1995, condition: excellent (used), Very well maintained pre-cutting circular saw for side goods. With hydraulic power unit and accumulator, double clamping hydr. Itjdpfxjh Eyqvs Aacjn Attachment kit with measuring roller for riving knife. Electric control cabinet with control. Control panel with digital dimension input and operation. Photos show original condition.