Roundwood sorting plant

HOLTEC

Condition: excellent (used), cutting length (max.): 1,600 mm, HOLTEC Piccolo, cutting length 1600 mm, 7.5 kW motor, little used Kledpfx Agex R Tbio Uel

Condition: good (used), Year of construction: 1990, 4-shaft shredder from the well-known manufacturer Untha, type RS 30. 2 x 7.5 kW. The gearbox was overhauled and new cutter discs were installed on the shredder 3 years ago. Since then, it has hardly been used. Repair costs amounted to €5,300. Kljdpfxoxpn Hno Ag Uol

Year of construction: 2025, condition: new, functionality: fully functional, new mobile package cross-cut saw Holtec Piccolo ideal for start / end and cross-cuts on timber packages chain set with STIHL chain type Rapid Super 0.404" for extremely fine surfaces and stellited guide rails on both sides (four-way reversible) Kljdpfxoh Imuvo Ag Ujl 5.5 kW electric motor High cutting performance for bundles up to 1.10 m x 1.10 m and log diameters up to 1.30 m blade length: 1.60 m 400V, 50 Hz 1 year guarantee immediately available from stock

Year of construction: 2025, condition: new, functionality: fully functional, 1 new mobile Holtec KAPPSTAR HF122 package crosscut saw robust all-rounder for sawn timber and logs for start / end and cross-cuts Klodpfxeh Imu Do Ag Ujl Package cross-sections up to 1.30 m x 1.30 m Log diameter up to 1.60 m Electric motor 11 KW STIHL pointed tooth chain for cross-cutting sawn timber or with STIHL planer tooth chain for cross-cutting logs Stellite guide bar on both sides (four-way reversible) Bar length: 1.90 m 400V, 50 Hz 1 year guarantee

Year of construction: 2003, condition: ready for operation (used), Used drum dryer manufactured by SAFEM, extracted from a line of gluten-free products. Fluid: Steam Design pressure: 12 bar Maximum operating pressure: 9,5 bar Test pressure: 24 bar Maximum operating temperature: 192ºC Volume: 4.55 m3 Pressure x Volume: 54.6 bar x m3 Kedsq Nmuwjpfx Ag Uell

Condition: new, Year of construction: 2022, functionality: fully functional, Holtec ES 121 SHK 4 m Year of manufacture: 2022 Control: Simatic HMI Saw chain: 4788 (190 cm) Guide bar: 3322 (190 cm) Sawn timber data: Packages for cutting: Max. 4200, an.= 1200 al.= 1200, Minimum: 2,500 Packages after cutting: max: 4,000, min: 700 Cutting waste: max. 300 Operating voltage: 400 V 50 Hz Kljdox Dmavopfx Ag Uel Oil filling: HLP-D-32 Tank capacity: 70 l Pressure: 70 bar The machine is unused and dismantled. Inspection possible at any time.

Condition: ready for operation (used), For sale is a complete log yard with long log feed, Nicholson A6/35'' debarker and Baljer Zembrod OBX V-24 bridge crane with up to 200 meters of rail. Kjdpfxewxndnj Ag Usll

Condition: new, Year of construction: 2025, Laser source: Raycus or Max: 4/6/8/12 kW Laser head: 3 D BOCI , Control system: FSCUT 5000 A Chuck: 20-450 mm Loading/unloading: 12000 mm X/Y axes Positioning accuracy: ±0.05/1000mm Repeat accuracy: ±0.03/1000mm Acceleration: 0.8g (m/s²) Rotation speed: 60 rpm Max. Positioning speed: 60 m/min Max. Max. weight of a tube: 1500kg 1.Raycus 6000W laser source 2.BEVEL laser head 3.welded frame DPL 4.Schneider electrical components 5.helical rack KH 6.techmech reducer 7.Yaskawa servomotor 8.SHAC guides 9.integrated power control 10.FScut 5000 software 11.integrated electrical cabinet 12.HANLI water chiller 13.cantilever gantry axis-X FHBS 14.automatic waste collection Klsdpoi Apfzofx Ag Ujl 15.crawler-type automatic workpiece collection 16.automatic support system 17.loading frame 12000mm 18.unloading frame 12000mm

Condition: used, Holtec package cross-cut saw - hydraulic lowering of the saw blade - length measurement - hydraulic package ejection Ksdpfx Agsxzr Efs Ujll

Condition: excellent (used), Holtec package crosscut saw HF 121 Kjdpfx Agsufg Tds Usll 1,9m cutting length

Year of construction: 2024, condition: new, Overview - of the different variants *Not every position is required: Optional: -Bale shredder MHB from 24.990 € net -MHZ straw mill from € 7,980 net -Special hopper 970 € net -Cyclone from € 3,750 net -Sheet metal silo demonstrator with discharge (only sketched in the picture) *optional, if you want to load with the wheel loader Unit price net from € 14,750 - Demonstrator -Dedusting auger - length approx. 4 m 4 sieves are mounted on the underside, which are extracted. Unit price net from: 9.750 € - Extraction parts / hoses flat rate 945 € net - Complete control system Net unit price: € 2,750 -Demonstrator extraction unit MMJET 160 Demonstrator, with cleaning Connection 160, fan 2,2kw air capacity 1850m³ /400 V Automatic compressed air cleaning Unit price net from: 6.950 € -Baler B 400 Bales approx. 400x400x800 (height adjustable) Up to 30 bales per hour with + - 20 kg from 59.995 € net *A reference system (baler) is located in zip code: 64579 Gernsheim Technical data: Bale size (WxDxH): 400 x 400 x 800 (height can be adjusted on request) Bale weight +/- 20 KG (depending on material) Capacity: approx. 30 bales per hour Storage container approx. 0.7m³ capacity Filling level sensors for min./max. filling level in the container Hydraulic pre-compressor Hydraulic compression ram Hydraulic unit, valve block with oil tank Pump 18.5 KW / 50 liters Rollers in the bale chamber for easy bale push-off Dimensions (l x w x h) 3105x2830x2455 mm Weight approx. 1500 KG mütek baling presses / wrapping machines are designed for the production of bales from a wide variety of materials such as shredded micanthus or elephant grass, wood chips, sawdust and shredded straw. straw. The machine is characterized by a robust design that guarantees consistent quality in continuous operation. quality in continuous operation. The baler compacts the material filled into the storage container without the addition of binding agents and packs the material into plastic bags. The volume of the material can be considerably with the baling press. The volume reduction rate depends on the material. The maximum material moisture content must not exceed 18 % Atro. The container of the mütek baler can be fed automatically or manually and has a volume of approx. 0.7 m³. volume of approx. 0.7 m³. Containers with a larger volume or with an attached suction and filter system as a complete disposal unit are also available. In addition to automatic filling via deduster, mütek also offers filling by means of screw conveyors. With both variants, automatic automatic dedusting is possible. mütek baling presses are equipped with a control cabinet for the control system. In the standard version, the dimensions of the bales (width x depth x height) are 400 x 400 x 800 mm. However, the height can be adapted to your requirements on request. The following advantages arise in the production of bales: - simple and safe storage - No loose dust - Minimization of the storage volume - Low transport volume *Requirements for source material: - dry (max. 30 % ATRO) Kodpfjff Sbijx Ag Usll - Maximum length 35 mm

Condition: excellent (used), HOLTEC HFT 21 packet cutting saw with automatic feed – year of production 1986 – German production – electric roll feed Technical parameters: - engine power 11 kW - guide length 1700 mm - package width 1300 mm - package height 1300 mm - cutting length max 4500 mm - roll width 1300 mm - spacing between rolls 900 mm - roller diameter 160 mm - height of the rollers from the base 730 mm - total length 9400 mm Kljdpfx Asiwfm Ujg Uol Transport dimensions 650 x 200 x 256 cm weight 2000 kg

Condition: used, Year of construction: 2000, functionality: fully functional, Holtec sorting block train, type SBZ. Length 94.5 m. 52 boxes. Klsdpfx Agjw Ug Age Usl

Condition: used, Cutting thickness calculator for log band saw Cutting thickness computer Alternative to the Mudata control system with the option of individual customization Touch industrial PC Siemens Simatic S7 with rotary encoder or other measuring system Cutting programs are easy to change Cutting programs can also be divided into groups Program is adapted according to customer requirements Operation via touch display or keyboard possible The next step in the cutting program via buttons on the joystick All relevant values can be shown individually on the display (e.g. total distance, next cut, complete cutting program, dimension of the previous cut, feed speed, etc.) all parameters can be displayed and changed on their own parameter page or on the main page the sensor of a blade deviation monitor can be evaluated (possibly linked to feed speed) Klodpfoiwaxnox Ag Uol Infeed via proportional valve and hydraulic motor or via a stepper motor Inspection also possible in operation currently in operation with Primultini SGA 1300 CEB Suitable for any trolley size and make For a viewing appointment or further details please contact us by phone.

Condition: excellent (used), Year of construction: 2004, Multiblade saw Raimann ProfiRip KR 310 M with HOLTEC ES 121SHKA cross-cut saw and HurricAN extraction system Model: Raimann ProfiRip KR 310 M Year of manufacture: 2004 (refurbished in 2022) Multirip saw with 2 adjustable saw blades Technical details: - Track width: 340 mm - Total feed passage width: max. 950 mm (instead of 800 mm) - Cutting height with/without pressure plate: 115 mm / 130 mm Ksdpfx Agjw S S A To Uell - Workpiece length: minimum 450 mm - Maximum saw blade diameter: 380 mm - Minimum saw blade diameter: 250 mm - Saw blade bore: 80 mm - Saw spindle diameter: 65 mm - Saw spindle speed: 3,900 rpm - Main motor: 30 kW - Laser alignment lights: 3 units - Operating pressure: 6 bar - Stepless feed speed: 8 - 48 m/min - Feed motor: 1.5 kW - Voltage: 400V / 50Hz