Used Automatic Circular Saw for sale (26,971)

Condition: used, Year of construction: 1976, functionality: fully functional, Year of manufacture: 1976 Machine was modernized in 2020. Iodpfxoz Ruhme Afuebc

Condition: used, Max. saw blade diameter: 350 mm Semi-automatic saw feed 2 sawing speeds Submitted for cutting of stainless steel Coolant lubrication Ibjdpfxsz Hx Ete Afuec

Condition: reconditioned (used), functionality: fully functional, Refurbished sharpening machine for carbide-tipped circular saw blades. Ibjdpfx Aezmhd Uefuec Blade diameter up to 600 mm. Hydraulically controlled. Equipped with a cooling system, pump, and tank.

Condition: used, Year of construction: 1989, cutting diameter 260 mm Ibodpfx Afspxri Uouec serial number 109967 volt 380 V frequency 50 Hz weight of the machine ca. 500 t

Condition: used, saw blade diameter 370 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 100 mm 180 x 100 mm Isdpozlkvdjfx Afuobc Working height 925 mm saw blade turning speeds 17 - 70 U/min total power requirement 3,0 kW dimensions of the machine ca. 1,8 x 1,1 x 2,0 m Automatic cold circular saw - CNC control - Micro-lubrication system

Condition: good (used), Year of construction: 1980, functionality: fully functional, Type VMS III - PV Ijdpfxoz Hpaze Afuebc Machine No. 8518 Year of construction 1980 Technical data : 2-stage saw motor 2.0 / 2.6 kW Saw blade 350 mm 4 cutting speeds 8.5 / 17 / 34 / 68 rpm Clamping range, flat / round 200 / 120 mm Feed length, single stroke 5 - 600 mm Feed length, double stroke 1200 mm

Condition: used, Gehrungs cold-cut circular saw machine MEP Type Tiger 350 CNC FE Factory No. 00011818 Year of manufacture 1995 Cutting range at 90° round: Ø 115 mm Cutting range at 90° rectangle: 180 x 95 mm Cutting range at 45° round: Ø 110 mm Cutting range at 45° rectangle: 125 x 95 mm Cutting range at 30° round: Ø 90 mm Cutting range at 30° rectangle: 90 x 95 mm Cutting range round: Ø 120 mm Rectangle: 180 x 100 mm Iodpfx Afezrpl Dsujbc Vise opening: max. 185 mm Saw blade diameter: 350 mm Miter cut: 60° left to 45° right Saw blade speed: 15 / 30 / 45 and 90 rpm Motor power: 1.8 and 2.6 kW Mains connection: 400 Volt, 50 Hz Compressed air requirement: 6 bar - CNC control for up to 80 different cut lengths with corresponding quantities ???? - CNC control, cut length and quantity programmable - hydro-pneumatic saw head lowering - pneumatic material clamping - pneumatic material support - jaw feed with servo drive and ball screw - feed stroke programmable up to 9999 mm - 2 gear stages and 2 motor speeds - coolant system in the machine stand Space requirement L x W x H: 2000 x 1100 x 2030 mm Weight: 650 kg Good condition

Condition: excellent (used), Year of construction: 2014, Manufacturer: Henrik WINTER HOLZTECHNIK GmbH (Leipzig, Germany) Model / type: SAWMAX 600 Year of manufacture: 2014 Serial number: 130705-28 Power supply: 3×400 V, 50 Hz Maximum power: 1.69 kW Weight: 650 kg Ibjdpfsw R E Sljx Afusc Certificate: CE

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Sharpening machine for carbide-tipped circular saws. Iedezl Snuspfx Afusbc Sharpens the front and rear edges in a single pass. Technically inspected. Technical specifications in the PDF.

Condition: new, - High-speed cut-off saw for solid materials / profiles up to 75mm - Automatic loading magazine for bars up to 6300mm in length and 3t in weight - Feed system via ball screw - Single stroke of 600mm Ibodpfjggytqex Afuec - SIEMENS electronics / drive / control system - Good parts / initial cuts are sorted - Optional conveyor system for cut parts - Robot integration possible - Includes dust extraction system

Condition: used, Year of construction: 2005, saw blade diameter 450 mm cutting diameter 150 mm stroke 1300 mm cutting range 140x140 mm Roller conveyor 6000x350 Roller conveyor 4500x700 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Ibsdpoyutvgsfx Afujc About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2001, Technical details: saw blade diameter: 250/285 mm cutting diameter: 50-70 mm total power requirement: 5,5 kW weight of the machine ca.: 1 t Saw type: circular saws Cutting direction: straight cut Automation: automatic Material type: structural steels, stainless steels, tool steels Material width: 60 mm Material height: 70 mm Ibodpjwvbk Asfx Afuec *

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm 180 x 95 mm Working height 925 mm saw blade turning speeds 15 - 90 U/min total power requirement 3,0 kW weight of the machine ca. 0,68 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Electro-pneumatic, vertical, linear-guided automatic saw for use of HSS saw blades to make series cuts from 60° left to 45° right steel. The machine also works in semi-automatic cycle. CNC machine with multiprocessor and two with MEP control, latest generation controlled axes that make it possible to achieve 1000 with the same material Isdpfsfg Rlcjx Afusbc thickness different cutting programs, each with a different cutting length and number of pieces program.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, overall weight: 580 kg, Precision aluminum circular saw machine VELOX 350 VA-MPS Hydro-pneumatic fully automatic model For saw blades up to 350 mm in diameter, mitre cuts left and right 45° and bevel cuts up to 45° left. Cutting range: - 90° 120mm round, 105mm square, 200x80mm flat - 45° left 65mm round, 60mm square, 180x50mm flat - 45° right 115mm round, 100mm square, 150x80mm flat Standard features: • State-of-the-art micro-processor control with multi-function display • Safety package with the following functions: 1. Minimum inlet pressure monitoring 2. Clamping jaw monitoring/material tension • Hydro-pneumatic control of the saw head • Pneumatic double clamping device • Pneumatic vertical clamping device • Electro-pneumatic material feed unit Ibedpfx Aezpxh Nsfuec • Vernier scale for fine length adjustment • Integrated coolant spray device • Connection nozzle for chip extraction system Speed 3600 min-1

Condition: refurbished (used), Year of construction: 2025, Complete Overhaul 2025 Saw Blade: 350 - 400 mm Motor Power: 6.5 / 8.5 kW Speed: 1,500/3,000 rpm Ijdpoxpqzhofx Afusbc Cutting Speed: 1,650 – 3,800 m/min Saw Height Adjustment: Electronic Working Range Square, max.: 120x120 mm Working Range Flat, max.: 200x100 mm Working Range Flat, max.: 250x70 mm (for extra width only) Working Range Round, max.: 130 mm Saw Feed Rate: 0 – 40 mm/s, infinitely variable Cut Length: 5-600 mm (up to 9,999 mm with multiple strokes) Feed Speed, max.: 500 mm/s Weight: approx. 1,300 kg Dimensions (LxWxH): 1,800 mm x 1,300 mm x 1,950 mm The machine will be completely overhauled in our facility and will subsequently be in as-new condition. The following components, among others, will be renewed: - Conversion to PLC control - Conversion to Siemens HMI operator interface - Conversion to ball screw with servo drive - New electrical components - New pneumatic lines - New pneumatic components - Conversion to valve terminal - Optimization of extraction performance - New minimum quantity lubrication system - Replacement of general wear parts - Overhaul of the machine enclosure The machine additionally features: - Soundproof enclosure - Spacer extension (for high-quality cut surfaces without return marks) Optional: - Multiple clamping device for parallel sawing of multiple workpieces - Flat magazine for automatic feeding of raw materials up to 6 m long - 7.5 kW motor - 12 kW motor - Delivery and installation at your site - Training for your staff

Condition: new, saw blade diameter 370 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 100 mm 180x100 mm Working height 925 mm saw blade turning speeds 17 - 70 U/min total power requirement 3,0 kW dimensions of the machine ca. 1,9 x 1,45 x 2,1 m SPECIAL PRICE!!! High-performance vertical circular saw Hydropneumatic fully automatic. (20195) · miter left 60° + right 45° Ibedpfx Aed Iin Eefuec · Hydro-pneumatic control of the saw unit · Electro-pneumatic material feed unit · Smooth-running, powerful worm drive with large Transmission ratio, integrated in a stable cast housing for Achieving optimal cutting results · Vice with double clamping arm for low-burr cuts Lateral quick shift when changing the miter · Precision prism guide of the gear head, laterally adjustable · Particularly stable base frame with built-in automatic cooling system · Large chip drawer · Chip removal brush in the saw blade protective hood CNC control: · With button for over 90 different sawing programs with 99 sub-programs for length, quantity and angle · Automatic feed unit 2,000 mm via ball screw Incremental feed with automatic length compensation. Adjustable for cutting lengths from 25 - 9,999 mm. · Fully hydraulic control of saw frame and clamping devices · Pre-selection of 3 different material feed speeds · Visualization of the entire workflow with simple data entry ATTENTION: Price is without saw blade!!! (saw blade price EUR 204)

Condition: new, saw blade diameter 370 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 100 mm 180x100 mm Working height 925 mm saw blade turning speeds 15 - 70 U/min total power requirement 1,8/2,2 kW weight of the machine ca. 0,71 t dimensions of the machine ca. 1,9 x 1,45 x 2,1 m ACTION PRICE!!! High-performance vertical circular saw hydropneumatic fully automatic.(20192) · miter left 60° + right 45° · Hydro-pneumatic control of the saw unit · Electro-pneumatic material feed unit · Smooth-running, powerful worm drive with large Transmission ratio, integrated in a stable cast housing for Achieving optimal cutting results · Vice with double clamping arm for low-burr cuts Lateral quick shift when changing the miter · Precision prism guide of the gear head, laterally adjustable · Particularly stable base frame with built-in automatic cooling system · Large chip drawer · Chip removal brush in the saw blade protective hood Iedpfx Afod Iin Houjbc MPS control: · Save cut start/end · Display of current consumption, number of pieces, cutting time... · Adjustable water cooling · Cutting pressure regulator ATTENTION: Price is without saw blade!!! (saw blade price EUR 204)

Condition: excellent (used), Year of construction: 2004, 1 used, very well-maintained fully hydraulic circular cold saw automatic with flat vertical guides Max. saw blade diameter: 325 mm Cutting capacity at 90°: - Round: 100 mm - Square: 85 x 85 mm - Rectangle, flat: 165 x 85 mm Infinitely variable speed range: 20 - 100 rpm Max. saw blade dimensions: 325 x 3.0 x 40 mm Single stroke feed: up to max. 550 mm Multiple stroke feed: for lengths over 550 mm Working height: 930 mm Drive power: 3 kW / 400 V Machine dimensions (L x W x H): 2150 x 1450 x 1950 mm Weight: approx. 650 kg Accessories / Special Features: Ijdpfxjy E Uk Io Afuobc • Fully hydraulic design • Fully automatic operation, single cuts also possible • Vise feed • 90° cutting angle • Infinitely variable speed range 20 - 100 rpm • Length setting via programming on the control panel • Cutting speed and feed can be continuously adjusted on the control panel during operation • Single and multiple stroke feed • Adjustable flat vertical guides • Coolant system • Micro-spray system • 1 used saw blade included • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Year of construction: 1997, condition: excellent (used), A used, very well-maintained cold circular saw from EISELE, equipped with a 370mm circular saw blade, steplessly adjustable hydro-pneumatic feed, pneumatic material clamping, coolant system, and documentation. Speed: 17/34 rpm Cutting range: Ibedpfekfp D Tex Afuoc Round 90°/45° right/left/30° right: 130/130/105mm Square 90°/45° right/left/30° right: 120x120/100x100/90x90mm Rectangle 90°/45° right/left/30° right: 200x100/140x100/100/100mm Pneumatic connection: 7 bar Working height: 900mm Machine dimensions (W x D x H): 865x1332x2175mm Weight: 460kg Further technical data can be found in the PDF document. Technical data and dimensions: Subject to change.

Condition: used, Year of construction: 2019, Saw blade diameter: 350 mm Cutting area flat 90°: 170 x 100 mm Sawing area flat 45°: 120 x 100 mm Cutting area round: 120 mm Pneumatic Saw Blade Feed Coolant pump / minimum quantity spray device Pneumatic material clamping Iodpfsznxg Nex Afujbc Presented for sawing of stainless steel Length stop with automatic positioning up to 6200 mm Roller conveyor with 1000 mm left Weight: approx. 800 kg

Condition: good (used), Year of construction: 1998, Semi-automatic circular saw machine Manufacturer: KASTO, Type: V350 U, Year of manufacture: 1998 with miter cut, roller conveyor, and stop Saw blade diameter: 350 mm Pneumatic clamping device and saw feed Infinitely adjustable. Ibodpfx Aefym Ewsfuec Machine is in good condition and has seen little use.

Condition: used, Year of construction: 2004, saw blade diameter 360 / 425 / 460 mm cutting diameter 10 - 140 mm Ijdjv Nq Rtepfx Afujbc cutting speed 25 - 160 m/min total power requirement 35 kW weight of the machine ca. 4,2 t dimensions of the machine ca. 2,8 x 1,8 x 2,2 m

Condition: used, Year of construction: 2001, saw-blade dia. 400 mm Saw blade mounting hole 32 mm Saw blade motor performance 1,5 kW Saw blade motor speed 2.800 1/min cutting speed 59 m/s Iodpfx Afoz Eux Touobc operating pressure 6÷7 bar Dimensions (LxWxH) 920 x 1.060 x 1.450 mm weight approx. 214 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: excellent (used), Year of construction: 1999, Description to follow! Ijdpfxsz Ebqij Afuebc

Year of construction: 1988, condition: used, machine/vehicle number: 109357, disk of circular saw-Ø: 400 mm cutting area at 90° round: 130 mm cutting area at 90° square: 240 x 85 mm Iedpeb Sciasfx Afuobc cutting area in mitre at 45° square: profiles flat 180 x 70 mm cutting speeds: 10/20 m/min forward feed speeds: 0 - 1000 mm/min electrical connection: 400 V, 1,7/2,6 V space needed: 2750 x 1500 x 1900 mm weight: 1350 kg