Used Dna Sequencer for sale (545)

Condition: used, Illumina DNA Sequencer MiSeq SY-410-1003 Description: RFID tracking for consumables Djdpfx Acszikcroyjwd MiSeq Control Software 2.6 LTSC Operating environment Temperature: 22 °C ± 3 °C Humidity: Non-condensing, 20 % – 80 % Altitude: Less than 2,000 m (6,500 ft) Air quality: Pollution degree II Ventilation: Maximum 1,364 BTU/h For indoor use only Light-emitting diode (LED) 520 nm, 660 nm Dimensions W × D × H: 68.6 cm × 56.5 cm × 52.3 cm (27.0 in × 22.2 in × 20.6 in) Weight: 57.2 kg (126 lb) Power supply 90–264 VAC at 50/60 Hz, 10 A, 400 W Radio frequency identification (RFID) Frequency: 13.56 MHz Power: 100 mW Product safety and compliance NRTL certified IEC 61010-1 CE marked FCC/IC approved Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (See pictures) Weight: approx. 35 kg (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have by phone.

Condition: used, This listing is for a Qiagen QIAsymphony SP Sample Preparation Fully-Automated DNA RNA Purification Dwjdpfoxzgzusx Acyod Very good working and cosmetic condition The QIAsymphony SP is a versatile nucleic acid purification instrument providing high-quality nucleic acids compatible with with most common downstream assay technologies, such as real-time PCR, digital PCR, and next generation sequencing (NGS). The large range of a dedicated QIAsymphony kits enables optimized purification of genomic DNA, cell-free circulating DNA, RNA, bacterial and viral nucleic acids from a wide range of starting materials Features: Purification of high-quality genomic DNA, pathogen DNA/RNA, cell-free circulating DNA and cellular RNA 1-96 samples in 4 batches, from smallest forensic samples to 10 ml sample volumes Standardized protocols for diagnostic, routine, research and forensic applications Flexible loading of new samples during a run Protocols customizable (protocol steps, labware, etc.) on demand Traceability and LIMS compatibility Compatible with most commonly used sample tubes and elution tubes and plates Compatibile with QIAsymphony DSP kits for diagnostic workflows. Specification: Minimum input volume: 200µl Elution volume: 30-500µl Dimensions: 128 x 103 x 73cm (w x d x h) Weight: 175kg Electric supply: 100 - 230VAC 50/60Hz

Year of construction: 2015, condition: excellent (used), Exceptional Opportunity! From the former collection of the Max Planck Institute in Freiburg, we can offer you this highly efficient gene sequencing system, model "NextSeq 500," from the world-renowned brand "illumina." This system is one of the most powerful and widely used fully automatic gene sequencing systems, and it has become indispensable in virtually every laboratory worldwide. It is primarily used as a high-throughput system for the automated generation of DNA clone clusters through sequencing and primary analysis. Thanks to its particularly compact design, it is also perfectly suited for smaller laboratories and can be used ideally as a stand-alone device – all the necessary components are already integrated into the device, and complete operation can be performed via the built-in screen and a wireless keyboard. The device was acquired by the Max Planck Institute in 2016 and has been used very little. It has been continuously serviced by the manufacturer's customer service department and has only completed 395 runs – it is therefore in flawless condition both visually and technically – see the pictures. Dwsdpoz Rph Ijfx Acyjd The device can be used immediately; however, for the sake of good order, we would like to point out that in a commercial operation, the legally required tests according to MTK/STK must be carried out again. Dimensions (H x W x D): approx. 585 x 534 x 635 mm Weight: approx. 85 kg The total weight of the system, including accessories and pallet, is approximately 110 kg! The device can be picked up from our premises during regular opening hours after prior telephone arrangement. For an additional charge, shipping can be arranged within three working days after payment receipt, insured via a shipping company. The sale is exclusively to commercial businesses; you will, of course, receive an invoice with VAT shown. Private buyers have the option of purchasing the device "on behalf of a customer"; a direct commercial sale to private individuals is expressly not permitted! The goods are sold excluding any warranty or liability for defects. The exclusion does not apply to claims for damages arising from gross negligence or intentional breach of the seller's obligations, as well as for any injury to life, body, and health. If you have any questions regarding prices or technical details, please do not hesitate to contact us at the address provided.

Condition: used, This listing is for a Qiagen QIAsymphony SP Sample Preparation Fully-Automated DNA RNA Purification Very good working and cosmetic condition The QIAsymphony SP is a versatile nucleic acid purification instrument providing high-quality nucleic acids compatible with with most common downstream assay technologies, such as real-time PCR, digital PCR, and next generation sequencing (NGS). The large range of a dedicated QIAsymphony kits enables optimized purification of genomic DNA, cell-free circulating DNA, RNA, bacterial and viral nucleic acids from a wide range of starting materials Features: Purification of high-quality genomic DNA, pathogen DNA/RNA, cell-free circulating DNA and cellular RNA 1-96 samples in 4 batches, from smallest forensic samples to 10 ml sample volumes Standardized protocols for diagnostic, routine, research and forensic applications Flexible loading of new samples during a run Protocols customizable (protocol steps, labware, etc.) on demand Traceability and LIMS compatibility Compatible with most commonly used sample tubes and elution tubes and plates Compatibile with QIAsymphony DSP kits for diagnostic workflows. Specification: Minimum input volume: 200µl Dwedpjxzg Nxefx Acyed Elution volume: 30-500µl Dimensions: 128 x 103 x 73cm (w x d x h) Weight: 175kg Electric supply: 100 - 230VAC 50/60Hz

Condition: used, Perkin Elmer Chemagic 360-D Nucleic Acid Extraction System The Perkin Elmer Chemagic 360-D is an automated benchtop system for the isolation of nucleic acids (DNA and RNA) from a variety of sample materials. It uses Chemagen's magnetic bead technology to obtain highly pure nucleic acids for various downstream applications. Key features and specifications Technology: The system is based on Chemagen's patented M-PVA magnetic bead technology. Metal rods are magnetized to collect the beads with the bound nucleic acids and transfer them between different process solutions, thereby minimizing cross-contamination. Sample volume flexibility: It offers various "rod heads" (magnetic rod heads) for different volume ranges and throughputs: 12-rod head: For sample volumes from 1 ml to 10 ml. 24-rod head: For sample volumes from 200 µl to 4 ml. 96-rod head: For sample volumes from 10 µl to 400 µl. Applications: The isolated nucleic acids are suitable for a variety of applications, including next-generation sequencing (NGS), genotyping, PCR, and MLPA. Software: The intuitive Chemagic software enables easy setup of protocols, tracking of process status (run time, remaining time), and generation of LIMS-compatible log files for quality assurance. Accessories: An optional Chemagic Dispenser 360 is available to quickly and accurately pre-fill reagents, thereby reducing manual processing time. Dimensions: The device measures 800 x 800 x 900 mm (W/D/H). Certification: The 360-D version is a CE-IVD-registered and FDA-listed instrument intended for in-vitro diagnostics (in combination with the appropriate kits). The advantages at a glance • DNA isolation directly from human whole blood or plasma samples: No pre-treatment of the primary samples is required before extraction. • “Ready-to-use” DNA with high yield and purity • Fast process times: 96 samples in less than 60 minutes • Long DNA fragments: up to 200 kb, suitable for NGS • High recovery rates • Autonomous system for downstream assays Djdeyk Upmjpfx Acyewd Specifications: Manufacturer: Perkin Elmer Type: Chemagic 360-D Throughput: approximately 96 samples per run Sample capacity: 12, 24, and 96 Volume: 10 microliters to 10 ml Extraction heads (Chemagic rod heads): 96 Number of samples: 1 – 96 Sample volumes: 10 µl to 400 µl Tube plates: 96-well plates Extensive kit portfolio – whole blood, saliva, serum/plasma, etc. No cross-contamination Revolutionary compact benchtop design Computer workstation with Chemagic software LCD monitor, keyboard, mouse Power supply: 100–240 V~ (AC), 50/60 Hz Size/Dimensions: Width: 900 mm (1500 mm with attached display and open door) Depth: 820 mm (1000 mm with open door) Height: 900 mm Weight: 140 kg Year of manufacture: 2024 Video link Chemagic 360-D You can find more items – new and used – in our shop! International shipping costs on request!

Condition: used, This listing is for a Qiagen PyroMark Q24 Advanced Sequencer For advanced methylation and mutation quantification in long sequence runs using Pyrosequencing Advanced technology, software, and chemistry for long sequence runs Quantitative methylation analysis at consecutive CpG or CpN sites Improved quantification of sequence variations at any sequence position Easy and improved base calling functionality Assay versatility on the same instrument and in the same run PyroMark Q24 Advanced has improved Pyrosequencing technology to provide even better real-time sequence-based detection and quantification than before. PyroMark Q24 Advanced features advanced technology, software, and chemistry, and is highly suited for analyzing any kind of sequence variation, particularly DNA methylation at CpG or CpN sites, complex mutations, or for de novo sequencing applications such as microbial typing. Can be refurbished on request, refurbishment not included in price. Dwodpoxzh Suofx Acyed

Condition: used, Thermo Fisher Scientific KingFisher FLEX Magnetic Particle Processor 4 units available Manufacturer: Thermo Fisher Scientific Model: KingFisher FLEX Equipment Type: Automated Magnetic Particle Processor / Nucleic Acid Purification System Application: Automated DNA/RNA purification and sample preparation Description: The Thermo Fisher Scientific KingFisher FLEX is an automated magnetic particle processing system designed for high-throughput purification and sample preparation. The KingFisher FLEX uses magnetic bead technology to automate the processing of biological samples, providing consistent and reproducible purification of DNA, RNA, proteins and other biological targets. It is widely used in molecular biology, genomics, biotechnology, pharmaceutical research and clinical laboratory environments. The system is particularly suited to laboratories looking to automate repetitive sample preparation and purification workflows while reducing manual handling and improving throughput. Key Features: Automated magnetic bead-based sample processing Designed for high-throughput laboratory workflows Suitable for DNA and RNA purification Can be used for protein and other biomolecule purification applications Programmable automated processing protocols Consistent and reproducible sample preparation Suitable for research, biotechnology and pharmaceutical laboratories Multiple plate formats supported depending on configuration User-friendly automated operation Compact laboratory footprint Typical Applications: DNA purification RNA purification Nucleic acid extraction PCR sample preparation Genomics and molecular biology Dwsdpfez I S D Ssx Acysd Next-generation sequencing workflows Protein purification Pharmaceutical research Biotechnology research High-throughput sample preparation Removed from pharma plant in Cork, IE. Devices are in very good condition. Sold as seen ----- Keywords: Thermo Fisher, Thermo Scientific, KingFisher FLEX, King Fisher Flex, KingFisher Flex Purification System, magnetic particle processor, magnetic bead processor, DNA extraction, RNA extraction, DNA purification, RNA purification, nucleic acid extraction, sample preparation, automated sample preparation, molecular biology, genomics, biotechnology, pharmaceutical laboratory, laboratory automation, PCR preparation, NGS, next generation sequencing, protein purification, research laboratory equipment, scientific equipment, lab equipment.

Condition: used, SpectruMedix RVL 9612 Genetic Analysis System including PC and accessories This device is suitable for molecular biology laboratories, research institutions, and universities for genetic analysis (e.g., DNA sequencing, genotyping). Model: RVL 9612 Manufacturer: SpectruMedix LLC, State College, PA, USA Serial number: 1102 Revision: 2.0 Year of manufacture / Date of production: March 17, 2006 Mains voltage: 115/230 V Frequency: 50/60 Hz Power consumption: 3300 W Phases: 1 (single-phase operation) Certificates: CE compliant (HCS CE-D) Condition: Used (see images). Note: Dwsdpfx Acjxlrvxjyod For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, This listing is for the AATI Fragment Analyser capillary electrophoresis system The unit is in full working condition and is ready for immediate use The AATI Fragment Analyzer is an advanced automated capillary electrophoresis system designed for precise analysis of DNA and RNA fragments. Developed by Advanced Analytical Technologies Inc. (AATI), the instrument provides high-resolution sizing, quantification, and quality assessment of nucleic acid samples. Widely used in genomics, molecular biology, and next-generation sequencing workflows, the system streamlines fragment analysis by replacing traditional gel electrophoresis with a faster, automated process. It allows laboratories to process multiple samples simultaneously, delivering reproducible results with minimal manual intervention. The instrument supports a variety of assay kits for DNA and RNA analysis, enabling applications such as NGS library quality control, PCR fragment verification, and RNA integrity assessment. With integrated software for data analysis and reporting, users can easily visualize fragment distribution, concentration, and size profiles. Key Features: Automated capillary electrophoresis for DNA and RNA analysis High-resolution fragment sizing and quantification High-throughput sample processing Dsdjyr Nl Sjpfx Acyowd Ideal for NGS library QC, PCR product analysis, and RNA quality checks User-friendly software with clear electropherogram and gel-style outputs The AATI Fragment Analyzer is a reliable solution for laboratories requiring accurate nucleic acid fragment analysis with improved efficiency and reproducibility

Condition: used, This listing is for the PerkinElmer Chemagic™ 360 – Automated Nucleic Acid Extraction System The unit is in full working condition and is ready for immediate use. Each unit is on heavy duty trolley with lockable castors Dwodjxhgm Rspfx Acysd The Perkin Elmer Chemagic™ 360 is a high-throughput, compact benchtop instrument designed for automated DNA and RNA extraction from a wide range of sample types, including blood, plasma, saliva, tissues, and FFPE samples. It uses chemagen’s proprietary M-PVA magnetic bead technology for the efficient and reliable purification of nucleic acids, delivering high yields with excellent purity. Key Features & Benefits Flexible Sample Volume: Processes volumes from 10 µL to 10 mL, supporting a variety of protocols and sample types. High Throughput: Handles up to 96 samples per run, ideal for biobanks, clinical labs, and research institutions. Large Kit Portion Compatibility: Supports processing of large-volume samples with high reagent capacity. Cross-Contamination Prevention: Engineered protocols and magnetic separation minimize the risk of sample-to-sample contamination. Mixed Sample Types: Able to process different sample materials in the same run, enhancing workflow efficiency. Integration Ready: Compatible with automated liquid handling platforms for streamlined workflows. Compact Footprint: Space-saving design with dimensions of 80 x 80 x 90 cm (L x W x H), suitable for constrained lab environments. Advanced Sample Handling: Offers convenient and improved sample management, reducing hands-on time. Barcode Scanning: Enables automated sample tracking and improves traceability throughout the process. LIMS Integration: Produces LIMS-compatible log files, supporting full data traceability and compliance. User-friendly Interface: Intuitive software for easy setup, protocol customization, and real-time monitoring. Technical Specifications Sample Capacity: 1–96 per run Sample Volume Range: 10 µL – 10 mL Processing Time: ~45 minutes for 400 µL whole blood Dimensions (L x W x H): 80 cm x 80 cm x 90 cm Weight: 140 kg Power Supply: 100–240 VAC, 50/60 Hz Ideal Applications Next-Generation Sequencing (NGS) PCR and qPCR Genotyping and MLPA Clinical Diagnostics Biobank Sample Preparation

Condition: used, This listing is for a Life Technologies Ion Torrent OneTouch 2 with OneTouch ES The Life Technologies Ion OneTouch 2 with Ion OneTouch ES comprises two modules: the Ion OneTouch™ 2 Instrument and the Ion OneTouch™ ES (enrichment system). It simplifies the workflows by providing an automated solution for scalable and reproducible template preparation. It is used for DNA sequencing in healthcare, lab and life sciences. It streamlines the overall Ion semiconductor sequencing workflow, yielding significant time savings and increasing sequencing productivity. The system enables parallel template processing with sample sequencing on the Ion Proton™ or Ion PGM™ sequencers. This reduces the time from sample to sequence to a single day and enables processing of multiple samples per day. The combination of Ion semiconductor sequencing and the Ion OneTouch™ 2 System maximizes the speed of each experiment and minimizes the overall time to completion for each project. The modular design also allows for QC of Ion Sphere™ particles, to maximize experimental control and the success of each experiment. Features: Integrates multiple manual template preparation workflows into a single system Enables parallel processing of multiple samples per day through modular design Supports scalable template preparation for all Ion semiconductor sequencing chips Supports up to 400 bases on the Ion PGM™ System and up to 200 bases on the Ion Proton™ System Includes a full thermal cycling modality for amplification for quick optimization of thermal cycling parameters Employs a peristaltic pump fluidic system that eliminates the need for gas Fits easily on any benchtop with its small instrument footprint Specifications: Dodpfxsxzg Ube Acyswd Weight, OneTouch 2 23 lbs. (10.4 kg.) Weight, OneTouch ES 12 lbs. (5.4 kg.) Dimensions, OneTouch 2 12" W x 16" D x 14" H (30 x 41 x 36 cm) Dimensions, OneTouch ES 9.5" W x 12.5" D x 11" H (24 x 32 x 28 cm) Operating Humidity 20%-80% (non-condensing) Operating Temperature 15°C-25°C Multiplex Capability Up to 384 barcoded libraries High Throughput Compatibility Automated Protocols, Multiplexing, High Throughput-Compatible Power 100-240 VAC, 50/60 Hz, 5.5 A max

Condition: used, This listing is for the Applied Biosystems ProFlex PCR Sytem The unit is in full working condition and is ready for immediate release. The Applied Biosystems ProFlex PCR System is a thermal cycler/performance PCR instrument designed for amplifying DNA through PCR — a core technique in molecular biology for cloning, sequencing, gene expression studies, genotyping, and other applications. It’s used in research, teaching, and clinical lab settings (research use only; not for diagnostic procedures) Dedjx Syrqspfx Acyowd

Condition: good (used), functionality: fully functional, The innovative QIAcube controls integrated components including a centrifuge, heated shaker, pipetting system and robotic gripper. This enables the QIAcube to fully automate more than 40 QIAGEN spin column kits. The QIAcube comes preinstalled with a variety of protocols for purification of RNA, genomic DNA, plasmid DNA, viral nucleic acids and proteins, plus DNA and RNA cleanup. All standard protocols in the expanding range can also be downloaded for free. In addition, custom protocols tailored to your specific application requirements can also be requested. The QIAcube is well suited for academic research laboratories and pharmaceutical, biotechnology and biomedical research laboratories performing applications such as: Sequencing / sequencing analysis Gene expression analysis genotyping proteomics Centrifuge: 12,000 x g maximum, swing-out rotor with 12 positions, maximum 45° Dwedpfx Acovzr Nbeyed Humidity: Relative humidity of 10-75% (non-condensing) Instrument dimensions: 650 x 620 x 570 mm Operating temperature: 18 – 28 ° C Pipetting system: Syringe size 1 ml, pipetting range 5-900 μl Samples per run: 1-12 samples per run Shaker: Speed 100-2000 rpm, amplitude 2 mm, heating range room temperature to 70°C, ramp time of

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, stroke length: 265 mm, throat depth: 410 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, number of axes: 6, table height: 900 mm, oil tank capacity: 250 l, overall weight: 12,500 kg, total length: 6,450 mm, total width: 2,650 mm, total height: 2,750 mm, power: 18.5 kW (25.15 HP), input voltage: 400 V, input frequency: 50 Hz, number of support arms: 2, pressing force: 175 t, clearance between the columns: 3,600 mm, distance table to ram: 530 mm, table length: 4,050 mm, table width: 104 mm, type of input current: three-phase, Equipment: CE marking, safety light barrier, 2013 Durma AD-S 40175 CNC Press Brake – 6 Axis – Cybelec ModEva 10S Control Used 2013 Durma AD-S 40175 CNC hydraulic press brake for sale in Ireland. 6-axis CNC press brake with Cybelec ModEva 10S graphic control, Y1, Y2, X, R, Z1 and Z2 axes, CNC motorised crowning, laser guards, tooling and rear safety doors. Manufacturer: Durma Model: AD-S 40175 Axes: 6 Year: 2013 Capacity: 4000mm x 175T Control: Cybelec ModEva 10S Control Includes: Large Selection of Top & Bottom Tooling Description 2013 Durma AD-S 40175 CNC Press Brake, a high-quality 6-axis CNC hydraulic press brake with 4050 mm bending length and 175 tonne bending force. This machine is ideal for precision sheet metal bending, fabrication workshops, engineering companies, subcontract metalwork and production environments requiring a robust, accurate and well-specified press brake. This Durma AD-S 40175 is fitted with a Cybelec ModEva 10S Graphic CNC Control, offering 3D graphical programming and automatic bend sequences. The machine has 6 CNC controlled axes: Y1, Y2, X, R, Z1 and Z2, giving excellent flexibility for accurate bending and efficient backgauge positioning. The machine is in very good condition and comes complete with a large selection of Euro-style top and bottom press brake tools, laser guards, foot pedal, CNC controlled motorised crowning, quick-release top tool clamps and rear safety doors. Key Features Bending length: 4050 mm Bending force: 175 tonnes Axis configuration: 6 Axis CNC controlled axes: Y1, Y2, X, R, Z1 and Z2 Control: Cybelec ModEva 10S Graphic CNC Control Condition: Very good condition Crowning: CNC controlled motorised crowning Tooling: Complete with Euro-style top and bottom tools Safety: Laser guards and rear safety doors Clamping: Quick-release top tool clamps Includes: Foot pedal Suitable for: Sheet metal fabrication, precision bending, general engineering, subcontract fabrication and production bending Technical Specifications Model: AD-S 40175 Bending force: 175 tonnes Bending length: 4050 mm Distance between columns: 3600 mm Y-axis rapid speed: 120 mm/s Y-axis working speed: 10 mm/s Y-axis return speed: 100 mm/s Crowning: Motorised Daylight: 530 mm Table width: 104 mm Table height: 900 mm Stroke: 265 mm Throat depth: 410 mm Support arms: 2 Backgauge finger blocks: 2 X-axis travel speed: 500 mm/s X-axis travel: 650 mm R-axis travel speed: 350 mm/s R-axis travel: 250 mm Motor power: 18.5 kW Oil tank capacity: 250 litres Machine dimensions: 6450x2650x2750 mm Machine weight: 12,500 kg Cybelec ModEva 10S Graphic CNC Control The machine is fitted with a Cybelec ModEva 10S Graphic CNC Control, a user-friendly press brake control designed for graphical programming and efficient bending setup. Control features include: 3D graphical control interface 10.4” colour TFT screen 128 MB RAM 128 DM main memory Easy Cursor operation Automatic bend sequence calculation Single-page part programming capability CAD/CAM sequence viewing support Included Equipment This used Durma AD-S 40175 press brake is supplied with: 6 CNC controlled axes: Y1, Y2, X, R, Z1 and Z2 Cybelec ModEva 10S Graphic CNC Control Large Selection of Euro-style top & bottom tooling CNC controlled motorised crowning Laser safety guards Foot pedal Quick-release top tool clamps Rear safety doors Dwedpfx Acez Imc Noyed Front support arms Backgauge finger blocks

Condition: used, This listing is for QIAGEN QIAxcel Advanced DNA Analyzer plus Accessories. The unit is in full working condition and ready for immediate use. Djdoxzgy Dspfx Acyjwd This automated capillary electrophoresis system replaces traditional gel electrophoresis for fast, high-resolution DNA and RNA analysis of up to 96 samples • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Condition: used, This listing is for Illumina Array BeadXpress DNA Bead Array Reader Illumina’s new BeadArray Reader simultaneously scans Sentrix Arrays at two different wavelengths with a resolution of less than one micron. A scan of 96 hybridized samples in an Array Matrix, representing data acquisition from over 4.5 million discrete beads, takes less than 90 minutes. This represents the highest throughput of any scanning platform used for microarray-based genetic analysis applications. The BeadArray Reader offers broad dynamic range, high sensitivity, and a low limit of detection. These metrics are particularly important for users planning to study gene expression and other applications that are supported by BeadArray technology and that demand high scanner performance. Can be refurbished on request, refurbishment not included in price. Djdpfx Acjxzh Ayeyjwd

Condition: used, This listing is for the Qiagen QIAsymphony SP Sample Preparation DNA RNA Purifications Dodsyrrgxepfx Acyewd The unit is in full working condition and is ready for immediate use The Qiagen QIAsymphony SP is an automated sample preparation platform designed for efficient nucleic acid purification. It supports DNA and RNA extraction for molecular diagnostics, research, and clinical laboratory applications. The system reduces manual handling, improves reproducibility, and increases throughput for modern laboratory workflows

Condition: used, Compact device for automated nucleic acid purification The Perkin Elmer Chemagic 360 is an automated benchtop system for the isolation of nucleic acids (DNA and RNA) from a variety of sample materials. It uses Chemagen's magnetic bead technology to obtain highly pure nucleic acids for various downstream applications. With dimensions of only 80 x 80 cm and its unique sample volume flexibility, the Chemagic 360 is an innovative instrument that can be adapted to almost all of your nucleic acid purification requirements. By using the proven M-PVA magnetic bead technology, the Chemagic 360 delivers high yields of highly pure nucleic acids, which are suitable for a variety of downstream applications such as NGS, MLPA, genotyping, and PCR. Features at a glance: • Optimized design to prevent cross-contamination • Sample volume from 10 µl - 10 ml • Throughput of 96 to 4000 samples per day • Compact design • Ultra-fast protocols for DNA purification available Dodpfjyk Uy Sjx Acyjwd • Flexible reagent dispensing to keep operating costs low • User-friendly interface enables easy and quick installation • Easy integration into liquid handling platforms The advantages at a glance: • DNA isolation directly from human whole blood or plasma samples: No pretreatment of the primary samples is required before extraction • "Ready-to-use" DNA with high yield and purity • Fast process times: 96 samples in less than 60 minutes • Long DNA fragments: up to 200 kb, suitable for NGS • High recovery rates • Autonomous system for downstream assays Specifications: Manufacturer: Perkin Elmer Type: Chemagic 360 Throughput: approximately 96 samples per run Sample capacity: 12, 24 and 96 Volume: 10 microliters to 10 ml Extraction heads (Chemagic rod heads): 96 Number of samples: 1 – 96 Sample volumes: 10 µl to 400 µl Tube plates: 96-well plates Extensive kit portfolio – whole blood, saliva, serum/plasma, etc. No cross-contamination Revolutionary, compact benchtop design LCD monitor, keyboard, mouse Power supply: 100–240 V~ (AC), 50/60 Hz Size/Dimensions: 800 x 800 x 900 mm Weight: 140 kg Year of manufacture: 2024 Video link Chemagic 360 You can find more items - new and used - in our shop! International shipping costs on request!

Condition: used, This listing is for Roche GS Junior 454 Sequencer Genome Sequencing Unit Dwedjxzh Szjpfx Acyjd

Condition: used, Year of construction: 1997, operating hours: 25,000 h, functionality: fully functional, machine/vehicle number: 96108, total length: 3,000 mm, total width: 2,500 mm, total height: 2,800 mm, overall weight: 3,000 kg, water consumption per time unit: 10 l/min, inner diameter: 1,400 mm, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, pressure: 5 bar, compressed air connection: 5 bar, reception height: 1,000 mm, input current: 50 A, injection pressure: 4 bar, temperature: 50 °C, heating capacity: 30 kW (40.79 HP), power: 37 kW (50.31 HP), load capacity: 80 kg, operating pressure: 4 bar, empty load weight: 2,000 kg, Equipment: documentation/manual, Offered for sale is a spray cleaning system with an aqueous cleaner, featuring a two-stage spray cleaning process with a spray pressure of 4 bar. The basket is rotated or pivoted. Basket dimensions: L x W x H 815 x 565 x 525 mm. Throughput: approximately 4 baskets/hour. Fluid capacities: Washing 350 liters / Rinsing 250 liters. Heating capacity: Washing 18 kW, Rinsing 12 kW. Program sequence controlled by a PLC. Exhaust air for fume extraction: approximately 500 m3/h. Dwsdpo Ah Hl Ujfx Acyjd Accessories: 240 liters of liquid cleaner + 30 liters of rust protection.

Condition: like new (used), functionality: fully functional, Year of construction: 2025, For sale: a very lightly used LeMans B320-4100 hydraulic CNC bending press, manufactured in 2025. The machine was purchased new and has seen very little use. It is in excellent cosmetic condition and features a modern CNC control system, automatic bend compensation, and a comprehensive set of bending tools. With a bending force of 320 tons and a working length of 4100 mm, this machine can handle large-sized and thick sheet metal workpieces. The machine is equipped with a DELEM DA-69T CNC control system featuring a 17-inch touchscreen and 3D graphic programming, allowing for convenient programming of complex bending parts. The machine is connected and fully operational; it can be inspected, tested, and used for trial bends. Key Information Manufacturer: LeMans Model: B320-4100 Year of Manufacture: 2025 Serial Number: 2511385 Condition: Very Lightly Used Type: Hydraulic CNC Bending Press Technical Specifications Bending Force: 320 T Max. Bending Length: 4100 mm Controller: DELEM DA-69T, 17" Touchscreen Controlled Axes: Y1, Y2, X, R Rear Stop, X-axis stroke: 750 mm Rear Stop, R-axis stroke: 250 mm Upper Beam Stroke: 260 mm Throat Depth: 410 mm Max. Hydraulic Pressure: 300 bar Main Motor Power: 22 kW Power Supply: 400 V / 50 Hz Rated Current: 50 A Machine Weight: approx. 17,000 kg CNC Control and Automation The machine is equipped with a DELEM DA-69T CNC control system, featuring the following functions: 17" color touchscreen 3D graphic bending programming and visualization Automatic bending sequence calculation CNC-controlled Y1, Y2, X, and R axes Automatic CNC bend compensation system (crowning) Servo motor-controlled rear stop Dwjdpfxe Aipdps Acyod GIVI optical linear encoder for Y-axis positioning Construction and Equipment DELEM DA-69T CNC control system WILA automatic CNC bend compensation system (crowning) with GEC motor Promecam-type quick clamping system for upper tools AKAS II laser operator protection system Hydraulic system with HOERBIGER and ECKERLE components 2 adjustable front sheet supports Rear support with CNC control of the X and R axes Foot pedal control Side protection doors Rear laser safety curtain LED work area lighting Bending tools A large set of bending tools is included with the machine. All bending tools shown in the pictures are included in the machine's configuration. According to the equipment documentation: Upper tools: Eurostamp 1260, H67, 85°, R0.8 Segmented upper tools: Eurostamp 805 Lower tools: Eurostamp 2067, 4 grooves, V = 16–22–35–50 mm, 85°, H60 Additional segmented lower tool: Eurostamp 805 The tool set allows for a variety of bending operations, including the production of more complex profiles and box-shaped parts. Dimensions and Weight Overall Length: approx. 5750 mm (with control panel) Machine Body Length: approx. 4800 mm Width: approx. 2650 mm Height: approx. 3320 mm Weight: approx. 17,000 kg The machine is connected and ready for demonstration. You can inspect the machine in operation and perform trial bends. If you have any further questions, please do not hesitate to ask.

Condition: good (used), Year of construction: 2012, functionality: fully functional, power: 55 kW (74.78 HP), input voltage: 400 V, type of input current: AC, total length: 13,000 mm, total width: 4,600 mm, total height: 2,330 mm, overall weight: 18,000 kg, Equipment: CE marking, documentation/manual, Membrane Press WEMHÖNER VARIOPRESS® – Model BASIC Plus Technical Data: Press System: Hydraulic, single-daylight, upward-acting press with 2 tables, with automatic Vario-pin system and turning system. Year of Construction: 2012 Press frame consists of a steel frame, which is screwed together to form a closed unit. Each frame is made from a single piece. Dimensions of the heating plate: 2,800 x 1,500 mm Height of the press chamber: 60 mm Working height: approx. 950 mm Opening width: max. 150 mm Dsdpfx Ace Aid Etoyjwd Automatic membrane tension: Yes Number of press cylinders: 6 Diameter of press plungers: Ø 125 mm Design of the press tables: 2 tables with pin system, solid steel plates – top and bottom. Max. loading or workpiece size: approx. 2,540 mm x 1,250 mm Total press force: 2,400 kN Installed power: 55 kW Operating voltage: 400 V Control voltage: 24 V Brake voltage: 205 V Frequency: 50 - 60 Hz Electrical equipment: According to EN Cutting station: Yes Chamber pressure: max. 6 bar Operating pressure of the hydraulic system: max. 320 bar Required air pressure: min. 8 bar / approx. 80 Nl/ Multi-function frame: Yes – Wemhöner patent – Height of the multi-function frame 20 mm 2-daylight lifting system including support table 2 tray carriages with an aluminum plate. The aluminum plate consists of an aluminum sheet with grooves and channels for ventilation, as well as a support frame of 20 mm. Turning Turning device – lateral As soon as the tray reaches the position at the outlet of the press, the turning head rotates the entire workpiece mat by 180°. During the turning process, a vacuum system is activated to fix the door mat under the turning head. As soon as the turning head reaches the end position, the vacuum is switched off, and the doors can be trimmed by the operator in one step with a special knife. - Robust, welded steel frame construction for supporting the machine elements - Hydraulically controlled turning process - Turning table with plastic cover - Vacuum system for the turning table - Turning process approx. 18 seconds Electrical control: Programmable controllers (PLC) of type SIEMENS Step 7 for the entire scope of supply. Control panel as a touch panel for the PLC control SIEMENS MP 277 with a 10-inch color monitor in the national language. Decentralized switching and control panel including wiring. Analog modem for monitoring the program sequence of the PLC controllers.

Condition: as good as new (ex-display), Year of construction: 2026, Hebrock F 4 - Demonstration machine with 37 operating hours - For complete processing of your panels For those who don't want to compromise. With the F 4, we offer a model that allows you to produce completely processed edges in just 4 meters of machine length. The F 4 is not only space-saving but also offers an excellent price-performance ratio. Max. edge thickness 3 mm Min/Max. workpiece thickness 8 – 50 mm Min. workpiece length approx. 160 mm Dodpfxe Aikb Ij Acyewd Feed speed approx. 7 m/min Ready for operation in approx. 3.5 min Max. power consumption approx. 7.4 kW Electrical connection 400 V – 3 phases – 50 Hz Work table height approx. 900 mm Machine dimensions approx. 4050 x 1300 x 1400 mm (L x W x H) Weight approx. 820 kg Extraction nozzle Ø 1 x 140 mm PLC control with 10" touchscreen Top-mounted quick-heating glue tank (maintenance-free) Support plate for edge material Automatic central lubrication (miter saw, corner milling cutter) Optical display for workpiece sequence Outrigger (extendable to the front) Quick-change system incl. glue change device for PUR processing Surface scraper with dual sensing Pneumatic roller capping (scissor design, Hebrock system) Double roller pressure (ball-bearing mounted) Transport chain with firmly screwed special chain plates Joint milling cutter Milling unit Miter saw Corner milling cutter Accessories: Radius scraper (incl. pneumatic extraction) Multi-radius scraper (R1/R2) Pneumatic 3-point adjustment Quick-change system for corner milling cutter Nesting for milling station and radius scraper Additional change motor for corner milling cutter with tool set The chassis shown in the pictures is not included with the machine. Location: In stock at 54634 Bitburg - available for immediate delivery -

Year of construction: 2020, condition: good (used), functionality: fully functional, machine/vehicle number: HG-1020-5571, The machine shown is a HEBÖ RBV-12SV pipe drilling machine with extensive accessories. The machine is designed for the processing of pipes and profiles and is used as a semi-automatic pipe drilling machine. According to the manufacturer, it is suitable for applications in, among other things, railing construction, shelving system construction, and the furniture industry. The processing can include drilling, reaming, core drilling, and thread forming. The RBV-12SV has an automated processing sequence after manual clamping of the workpiece. Technical specifications according to the data plate of the machine shown: Manufacturer: hebö Maschinenfabrik GmbH Machine type: RBV-12SV Machine number: HG-1020-5571 Year of manufacture: 2020 Voltage: 400 V Frequency: 50 Hz Power: 5 kW Current: 11.5 A Dedszypgdspfx Acyswd Weight: 555 kg The manufacturer's specifications for the RBV-12SV also include a speed range of 0–2,250 rpm and a feed rate of the drilling unit of 0–300 mm/min. Depending on the model, pipes up to 3" or 88.9 mm, square profiles up to 80 × 80 mm, and other profile shapes can be processed. Optional: with mounted pneumatic/manual thread drilling device CMA LCN 12 with compressed air drilling unit (yellow attachment).

Condition: excellent (used), Year of construction: 2022, operating hours: 883 h, functionality: fully functional, 8 Channel JuanaRoll machine - Automatic Pre-roll machine Manufactured in 2022, in excellent condition, very few working hours - only 883 working hours in total Machine capable of producing up to 4,000 Pre-rolls per hour while having the highest accuracy in the industry Very flexible - capable of running multiple strains at the same time. You can dedicate specific lanes to specific sizes without having to change cone blocks. Cone presentation possible: Twisted & Trimmed / Twisted / Crown - Cone processing machine for opening, filling,weighing, compressing and twisting of cones - Equipped with servo-controlled conveyor with cone blocks for station-to-station processing - Vision System per channel for checking for correctly opened cones before filling - Weighing systems with individual weigh cells per channel for accurate dosing - Vibratory feeders and stainless steel canisters per channel for product supply - Funnel and compactor assemblies with adjustable compaction sequences via HMI - Tamping station for even compaction of the product - Twister unit for automatic closing of cones (optionally with trimmer system) - Central HMI control with recipe management, alarm notifications and maintenance functions - Electrical connection: 230 Vac, 60 Hz, 1 phase, 20 Amps - Pneumatic connection: 90 PSI (6.2 bar) dry air - Air consumption: approx. 15 CFM (7.1 L/s) - Machine weight: approx. 1,800 kg - Dimensions (L x W x H): approx. 362 x 131 x 235 cm Dsdpfxeyzuhxj Acyowd - Machine is designed for industrial production environments - Comes with operator's manual