Used sawing and cutting for sale (152)

Year of construction: 1982, condition: used, In Good Condition Gkodpfx Ajdq Ug Iocmod

Condition: good (used), cutting width 15-200 mm cutting height 210 mm minimum element length 1200 mm main engine 15 kW feed engine 1.1 kW smooth feed speed regulation 5-26 m/min disc diameter 630 mm Gjdpfjwm Srrox Acmekd

Year of construction: 1995, condition: used, In Good Condition Gkodpfxsdq Uf Hj Acmjd

Year of construction: 1982, condition: good (used), Travelling crosscut saw, Esterer KSG-F, manufactured in 1982 including saw blades including control system including length measurement including frame including hydraulics available immediately Gjdpjip T Dljfx Acmskd Location: Austria, near Vienna

Condition: new, The new Heinola SM chipper canter is now available for sale. It features two 160 kW motors and two chipper heads, each equipped with five straight chipper knives. The total weight of the unit is approximately 14,000 kg. Gjdpfx Acjwfr Nuemekd

Condition: ready for operation (used), 03. Pini and Kay VU 65 HH e band saw with splitter wedge with 45 kW drive motor with gearbox with saw blades with saw blade tensioner with clamping device with templates with blower Gksdoh Ict Espfx Acmod Location: Austria, near Steyr

Condition: refurbished (used), Chipping speed. Godpfx Acegmtf Eemskd

Year of construction: 2024, condition: new, 2.5 - 6 m Cutting length - 120 - 450 mm max. cutting height Godpegp Su Eofx Acmjkd - 80 -250 mm cutting width - infeed table with centering rollers - infeed table with log turning device - saw with 6 - fold width adjustment - draw-out bridge with 2 driven draw-out rollers - Pull-out bridge with 5 pairs of pressure rollers - 650 mm saw blade diameter - 2 x 37 KW saw motors below - 2 x 30 KW saw motors above - 6 saw cuts - 4 KW SEW feed gear motor - 5- 30 m/min stepless feed speed

Year of construction: 2025, condition: new, functionality: fully functional, - 340 mm Cutting height - 70-250 mm max. cutting width Gkodpfshkh N Tex Acmsd - 500 mm passage width - 6000 mm step length - 3-20 m/min feed speed - 2 x 30 KW saw motors - 1,1 KW feed motor - 0,25 KW width adjustment motor - 1300 Kg weight

Condition: used, Year of construction: 1987, No. 3186 Frame saw / gang saw MÜLLER VGU / 4/71 Used, year of construction 1987 Passage 710 mm Drive motor 75 kW Hydraulic belt tensioning Manual width adjustment Including hydraulic clamping carriage, riving knife, gauges for width adjustment, electrical control cabinet, various saw blades Sale on behalf of customer, ex location near 47051 Duisburg, without dismantling, without transport and assembly Errors in description and price excepted Dismantling, transport and loading by us optionally possible In order to avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale Gkodpsvcqanefx Acmod For used machines, any warranty is excluded, the following applies: “purchased as seen” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: new, Year of construction: 2025, type of input current: AC, power: 5.5 kW (7.48 HP), input voltage: 400 V, Pelleting plant for a wide variety of materials such as wood, miscanthus, agricultural by-products and waste products (hay, straw, maize straw ....) Animal feed ..... This is a complete system (compact system), which is built on a base frame and consists of the following components: Storage container for raw material 1.5 m³, incl. agitator Inclined mixer for raw material incl. level sensors and fully automatic moisture metering Gedpfx Aeud Nx Hocmekd Dosing screw for optimum material feed to the press (speed-controlled) Press 5.5 kW, with horizontal round die, discharge chute with dust separation, temperature monitoring Conveyor belt for pellet removal, discharge height approx. 2.0 m The entire system is operated centrally using a Siemens PLC via touch display! In addition, all parameters are permanently monitored so that the system is shut down if a problem occurs! Price excl. VAT! The price includes operator and service training (in A-4352 Klam)! Attention, some of the pictures do not correspond to the actual system ( are example pictures ) !!!!! Attention!!! we are constantly looking for sales and service partners (worldwide) !!!!!

Condition: used, Bögli KHV-700 Marathon log saw with splitting wedge operated without any problems until it was dismantled Gkedpfxohvmn As Acmjd Location: Upper Austria

Year of construction: 2025, condition: new, functionality: fully functional, - 350 mm max. cutting height - 75-250 mm min/max Cutting width - 100 - 350 mm min/max logs - 18-80 mm side board - 1,8 - 6m Cutting length Gkodpfx Acehkh Npemjd - 550 mm saw blade diameter - 4/6 saw cuts simultaneously - 5-30 m/min variable feed speed - 2x30 KW and 2x22 KW saw motors - 3 KW SEW feed gear motor - automatic 6-fold width adjustment - infeed table with 3 fold turning device - 2 centering roller pairs pneumatic pressure - driven infeed roller with 0,75 KW and pneumatic pressure - 2 driven outfeed roller pairs with 0,55 KW each - 4 pneumatic pressure roller pairs in the outfeed

Condition: new, Year of construction: 2026, operating hours: 2 h, functionality: fully functional, Pelletizing plant for a wide range of materials such as wood, miscanthus, agricultural by-products and waste products (hay, straw, corn straw...) animal feed... This is a complete system (compact system) which is built on a base frame and consists of the following components: Storage container for raw material 4 m³, including agitator Inclined mixer for raw material including level sensors and fully automatic moisture dosing Dosing container for pressing aids (e.g. corn starch) Dosing screw for optimal material feeding of the press (speed-controlled) Press 15 kW, with horizontal round die, discharge chute, temperature monitoring, overfill protection..... Conveyor belt for pellet removal, discharge height approx. 2.5 m Gedpfx Asvlz H Rjcmekd Drum sieve for dust removal and cooling of the pellets The entire system is operated centrally using a Siemens PLC via touch display! In addition, all parameters are permanently monitored so that the system is shut down if a problem occurs! The system is designed and prepared for the operation of a second press! Price excl. VAT! !!!!! Attention!! we are constantly looking for sales and service partners (worldwide) !!!!!

Condition: good (used), Primultini band saw Roller diameter: 1300 mm Roller width: 140 mm Gsdod Sclhopfx Acmokd with Planomatic system

Condition: excellent (used), Raimann B4 band saw Gedpsdyccdsfx Acmokd

Condition: used, Twin band saw Raimann B110 Duo Roll diameter 1100 mm Roll width 100 mm Feed rate 0-40 m/min Gsdpfx Acedfc Shemskd

Year of construction: 2004, condition: used, High-performance band resaw Moehringer / Braun Canali Type multi-line TB 1250 MF-20 Roll diameter 1250mm Roll width 150mm Saw blade speed: 28-50 m/s Connected power: approx. 45kW Feed rollers 2x4 Gedpfx Aodfcryjcmokd Roller height 200mm Cutting height up to the lower edge of the pressure guide: 400mm and higher Cutting width 250mm to the left of the saw blade and 250mm to the right of the saw blade with center cutting device complete technical documentation Original photos will follow.

Year of construction: 1992, condition: used, Raimann B110S band saw Roll diameter 1100mm Roll width 100mm Gjdpfx Aeb R Ty Ajcmokd Cutting width to the right and left of the saw blade 200mm Maximum cutting height 400mm

Condition: ready for operation (used), Slab recovery line with below machines: One 2-blade board edger One single blade horisontal resaw Conveyors system between the machines included. Godpfx Aogwqk Socmekd

Year of construction: 2026, condition: new, • 260 mm cutting height • 750 mm cutting width • variable feed rate 5-30 m/min. • 2 x 75 KW sawing motors • 3 KW feed gearbox • 70 mm Ø spindle diameter • 1 set of spacer rings • electrical height adjustment of feed rollers Gkjdebu Rqpepfx Acmsd • 400 mm Saw blade diameter • complete electric control cabinet, incl. all cables • operator panel • painted in Colour RAL 6011 • Dokumentation in E • 5.500 kg weight

Year of construction: 2024, condition: new, - 340 mm cutting height - 70-250 mm max. cutting width - 500 mm passage width - 6000 mm cutting length - 3-20 m/min - 2 x 18.5 kW sawing motor - 1.1 kW feed motor Gkodpfx Acs E Rg Ssmsd - 0.25 kW width adjustment motor - 1300 kg weight

Year of construction: 2024, condition: new, max. cutting height – ø 340 mm Gedou Izkopfx Acmekd min./max. cutting width 80 – 250 mm min./max. side fence 18 – 80 mm max. cutting length 6,000 mm Feed rate 5 – 30 m/min Saw motors 2 x 55 kW Feed motor 4.0 kW Width adjustment motor 0.55 kW Infeed roller motor 0.75 kW Weight 8,000 Optional equipment Self-adjusting laser Infeed table extension up to 8,000 mm Automatic width adjustment with 6 fixed dimensions Equipped with 1,000-mm-ø blades Motorized log rotating device Electronic braking system

Condition: new, Year of construction: 2026, Customized paternoster stacking systems in different technical designs for sawn timber lengths from 3.0 - 6.0 m ( length on request ) options: - with/without lath bundling Godpfer Nx Tmsx Acmokd (different versions depending on requirements) - with/without slat magazine single or double chamber depending on requirements with pneumatic gripper - Infeed and outfeed according to customer requirements

Year of construction: 2026, condition: new, Wravor 20-160 – robust and reliable industrial circular - edger and multirip saw in one machine, designed for professional primary board processing. The machine is suitable for accurate and high-capacity edging and ripping of boards and cants in demanding industrial production. Technical data: - main motor: 30 / 37 / 45 / 55 / 75 kW - cutting thickness: 20 – 160 mm - max cutting width: 900 / 1000 / 1250 mm - number of movable blades: 1-4 (hydraulic or servo drive system for precise and flexible cutting adjustment) - computer setting of cutting width - heavy-duty and stable construction, Gkodpfxjy Rku Ho Acmjd - high cutting precision, - excellent productivity, - reliable operation for continuous industrial use, - different options for mechanisation (mechanic or automatic conveyors) The machine can operate independently or as part of a complete sawmill line with automatic transport systems.