Condition: refurbished (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 305.537.1992, warranty duration: 12 months, Le Meccanica CLM630ST 630/150 die and rolls Force Feeder with a 0.9KW motor Currently undergoing full refurbishment - Seals &bearings included Colour - customers option Customer to arrange collection and freight Iodpfxov Sq Rlo Aaljap

Condition: used, Year of construction: 2012, operating hours: 11,850 h, pressing force: 88 t, filling opening length: 1,800 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, overall weight: 23,000 kg, oil tank capacity: 2,000 l, power: 90 kW (122.37 HP), For sale used baler + used conveyor brand: HSM VK 88 + Stadler KF1800 Baler is VK 88 R – FU, Frequency drives, 2 x 45 kw. * Unblocking cylinder option * Ball joint fixing main ram cylinder * Stadler conveyor 1600 mm internal Year 2012 11850 hours Rod main cylinder and seals kit new. To be replaced : 2 front chamber floor section : middle and front to the channel Greasing / changing: Few sides diabolos are used and running, some rusty, some in good condition. Baler is running good and bales tying is ok Ram wheels OK Ram side wheels OK Rod main cylinder : almost new Main cylinder seals kit : almost new Ram sides nylon strips : 80 – 90 % good. Finetune the geometry adding spacers ( customer has parts on stock) Knife/ counter knife : good, 70% Needles wheels : ok but change is preferred + the closing plates Main frequency drive 1 of 2 : in total 2 x 45 kW : one is out of order. I don’t know if it will be changed or not. Baler is running on one pump. Side walls chamber : Side walls are worn out where the nylon guiding plate are sliding : few millimeters up to 2 mm average. Conveyor : Chain rollers are used with a bit of play. Greasing is missing but still good condition. Guiding strips are ok Feeding cleats are worn out, almost all. Start/stop with frequency drive. Iasdpfx Aaoyuyg Sslsp Side walls ok on incline part and in pit. Wire coils platform : Not included.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 00128-0010-01, total width: 2,000 mm, This used Bollegraaf chain conveyor is being sold by Bollegraaf Recycling Solutions and is offered in combination with an extra-strong pre-press for large cardboard boxes and octabins. The chain conveyor is of the type Bollegraaf HBT 2250/2000. Ijdpfeyu Stksx Aaleap The corresponding extra-strong pre-press for large cardboard boxes and octabins is also equipped with a so-called wirbulator. Technical specifications chain belt conveyor: Manufacturer: Bollegraaf Type: HBT 2250/2000 Year of construction: 2008 Drive power: 7.5 kW Length of feed belt: 8,300 mm Length of inclined belt: 19,250 mm Length of swan neck: 2,400 mm Inclination angle: 30° Effective width: 1,960 mm Feed belt sidewall height: 500 mm Inclined belt sidewall height: 800 mm Weight: 16 t

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: Machinenummer 230067.020, pressing force: 60 t, power: 45 kW (61.18 HP), operating pressure: 250 bar, Bollegraaf Recycling Solutions, the original manufacturer of this mobile Bollegraaf baler, hereby offers the following machine(s) FOR RENT ONLY: Year of construction: 2022 Weight excl trailer: 22.000 kg Mobile Baler Iodpjh I T Ibofx Aaleap Volume capacity m3/hr max. 365 334 321 301 Volume weight kg/m3 max. 15 30 50 80 Weight capacity T/hr max. 5.5 10 16 24 Bale weight 400 – 800 kg, depending on S.G. of material and bale length Bale length - adjustable Bale height - 720 mm Bale width - 1100 m Filling opening - 1100 mm x 1320 mm Max. size supply - 1500 mm x 1200 mm Pressure force ram - max 60 tonf. Pressure force pre-press flap - max 25 tonnes Cycle time - 18 seconds Motor - 45 kW Motor Twistomat - 2.2 kW Motor counter pressure pump - 1.1 kW

Condition: ready for operation (used), Year of construction: 1999, operating hours: 15,547 h, functionality: fully functional, machine/vehicle number: W99-031.010, pressing force: 60 t, pressure: 250 bar, power: 30 kW (40.79 HP), year of last overhaul: 2024, Equipment: documentation/manual, This used baler is being sold by Bollegraaf Recycling Solutions. Iedpjyux Nxjfx Aaleap This is an HBC60 (30kW) baler with vertical binding. This baler can be viewed in our overhaul workshop. This baler has only 15,547 hours. Technical condition is very good! (the baler has only baled paper) This baler comes with the following options: * intermediate hopper + distributor * belt feed chute * bale discharge, * wire roller platforms

Condition: used, Year of construction: 2005, total width: 1,250 mm, total height: 2,000 mm, total length: 4,000 mm, Empty weight: 5.000 kg Price: On request - Year: 2005 - Documentation available: No - CE certificate present: No - Serial number: 310 - Transport dimensions: 4000mm x 1250mm x 2000mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Iedpfx Aasyr H S Ajljap VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2005, total width: 1,250 mm, total height: 2,000 mm, total length: 4,000 mm, Empty weight: 5.000 kg Price: On request Iedpfx Aoyr H Svoaleap - Year: 2005 - Documentation available: No - CE certificate present: No - Serial number: 309 - Transport dimensions: 4000mm x 1250mm x 2000mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 2016, operating hours: 47,700 h, functionality: fully functional, Baling press Avermann, type AVOS 1410 BR5 – 45/80, pressing force 80 t, year of manufacture 2016 Technical Data: Manufacturer: Avermann Maschinenfabrik Type: AVOS 1410 BR5 – 45/80 Year of manufacture: 2016 Pressing force: 80 t Drive power: 45 kW Filling opening: 1,400 x 1,000 mm Throughput at 35 kg/m³: 6.0 t/h Throughput at 60 kg/m³: 10.5 t/h Throughput at 100 kg/m³: 17.5 t/h Bale dimensions: 1,100 x 750 mm (W x H), length variable Bale weight: up to 600 kg, depending on material Tying: 5-fold vertical, automatic Machine dimensions: approx. 10,850 x 2,400 x 3,800 mm (LxWxH) Machine weight: approx. 18,000 kg Ijdpsyuvc Nofx Aaloap Note: The press is in good condition. It has been checked and tested under power by us. A video is available on our website or YouTube channel. The main cylinder was renewed in November 2025. A suitable WESTERIA conveyor belt is optionally available. Please note: All technical data are based on manufacturer information. We do not assume any liability for the information provided or for potential errors. This offer is subject to change, prior sale reserved, and may be withdrawn at any time. Inspections are possible by appointment. Sale against advance payment, ex works, without warranty or guarantee.

Condition: used, Year of construction: 2005, total width: 1,300 mm, total height: 3,850 mm, total length: 2,200 mm, Price: On request - Year: 2005 - Documentation available: No - CE marking present: Yes - CE certificate present: No Isdpfeyrtcujx Aaleap - Serial number: 308 - Transport dimensions: 2200mm x 1300mm x 3850mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 2010, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2010 Pressing force: 532 kN Voltage: 400 V Iajdpfjyu Iizex Aaljp Max. bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Fill opening dimensions: 119.5 cm x 65 cm Condition: Very good! Inspected and tested. FLITS Rental & Sales service: with every machine we supply one bundle of baling wire (120 wires). Need more bundles? Request a no-obligation quote. At FLITS Rental & Sales you choose speed, clarity, and reliability. We think along with you, respond immediately, and ensure you quickly receive the right machine. You are very welcome to view the machines at our location. We are located at: Schoterlandseweg 94, 8413NE Oudehorne. Visits are possible by appointment so we can take the time to provide you with detailed information and show you the right machines. We are happy to help you! Baler Paper baler Cardboard baler Plastic baler Waste compactor Recycling Textile Clothing press Waste Waste processing

Condition: good (used), Year of construction: 2011, functionality: fully functional, Available from June 2026 Baler Presto HPK 50 BS, year of manufacture 2011, with Whirbulator and optional Horstmann chain belt conveyor Manufacturer: Presto Model: HPK 50 BS Year of manufacture: 2011 Drive: 30 kW Pressing force: 50 t Feed opening: 1600 x 1050 mm (L x W) Channel cross-section: 700 x 1100 mm Maximum feed volume: 1.23 m³ Cycle time: 19 s Tying: 4-fold Throughput capacity at 35 kg/m³: 6 t/h 60 kg/m³: 9.6 t/h 100 kg/m³: 13.9 t/h Bale weight: up to 500 kg Machine dimensions: 8500 x 1700 x 2400 mm (LxWxH) Machine weight: approx. 12,000 kg Chain Belt Conveyor Data Manufacturer: Horstmann Model: PK 1100/11 Year of manufacture: 2011 Belt width: 1100 mm Speed: approx. 0.2 m/s (max. 0.3 m/s) Feed length: approx. 3000 mm Incline section: approx. 5000 mm Gooseneck: approx. 1000 mm Ijdeyub Drspfx Aaleap The baler is still in operation and can be inspected under working conditions. It will be available from early June 2026. Please note: All technical data is based on information from the manufacturer. We do not assume any liability for the specifications provided or for any errors. This offer is subject to change, prior sale reserved, and may be withdrawn at any time. Inspections are possible by appointment. Sale is ex works, payment in advance, without warranty or guarantee.

Condition: used, total width: 2,300 mm, total height: 2,300 mm, total length: 4,900 mm, - Details: - └ Description: Machine is currently not working, needs repair. Has been used to fill bags of sawdust briquette dimensions 430x310 mm - Documentation available: No - CE certificate present: No - Transport dimensions: 4900mm x 2300mm x 2300mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Ijdoyq Iitjpfx Aaljap Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 2017, functionality: fully functional, Baler Dixi 80 SLD with lifting/tipping device, semi-automatic, year of manufacture 2017 Manufacturer: Dixi Model: Dixi 80 SLD Year of manufacture: 2017 Drive power: 11 kW, 400 V / 32 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Press cycle: approx. 35 s Throughput capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500–600 kg Tying: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: paper, cardboard, film The baler is in good condition. It has been checked and tested by us. A video can be found on our website or YouTube channel. Isdpfxjyt Hl Sj Aaloap Please note: All technical data is based on manufacturer specifications. We accept no liability for the information provided or for potential errors. This offer is subject to prior sale and change without notice. Inspection is possible by arrangement. Sale is ex works, advance payment, without warranty or guarantee.

Condition: good (used), Year of construction: 2020, functionality: fully functional, Just arrived Baling Press Dixi 80 SLD, with lifting/tipping device, semi-automatic, year of manufacture 2020 Iaedpjygk Hgjfx Aaljp Manufacturer: Dixi Model: Dixi 80 SLD Year of manufacture: 2020 Drive power: 11 kW, 400 V / 32 A Filling opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Press cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film Please note: All technical data is based on the manufacturer's information. We do not accept any liability for the information provided or for possible errors. This offer is subject to change, prior sale reserved, and can be revoked at any time. Inspections are possible by appointment. Sale ex works, advance payment only, without warranty or guarantee.

Condition: ready for operation (used), Year of construction: 2014, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2014 Pressing force: 532 kN Voltage: 400 V Max. bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening dimensions: 119.5 cm x 65 cm Condition: Very good! Fully checked for operation. FLITS Rental & Sales service: with every machine, we supply one bundle of tying wire (120 wires). Need more bundles of tying wire? Feel free to request a quotation. At FLITS Rental & Sales you choose speed, clarity, and reliability. We think along with you, respond immediately, and ensure you quickly have the right machine at your disposal. Iaodpfxjyudflo Aaljp You are very welcome to view the machines at our location. We are located at: Schoterlandseweg 94, 8413NE Oudehorne. Visits are by appointment, so we have ample time to inform you properly and show you the right machines. We are happy to assist you! Waste baler Paper baler Cardboard baler Plastic baler Waste compactor Recycling Textile baler Waste Processing

Condition: excellent (used), Year of construction: 2019, operating hours: 141 h, functionality: fully functional, Vertical baler HSM V-Press 860 plus B, year of manufacture 2019 Technical specifications: Manufacturer: HSM Model: V-Press 860 plus B Year of manufacture: 2019 Operating hours: 141 Pressing force: 60 t Drive power: 4 kW Filling opening: 1500 x 651 mm Filling height: 1129 mm Bale size: approx. 1500 x 1200 x 780 mm Isdpfx Aoyr Dp Ejaljap Bale weight: 550 kg Binding: manual Theoretical cycle time (idle): 25 s Theoretical output: 32.5 m³/h Dimensions: 2099 x 1245 x 2985 mm (W x D x H) Weight: 2340 kg Materials: Film, paper, cardboard Please note: All technical data is based on manufacturer information. No liability is assumed for the accuracy of the data or possible mistakes. All offers are subject to change, prior sale reserved, and may be revoked at any time. Inspections are possible by appointment. Sale is ex location, without warranty or guarantee. Our payment term is 100% advance payment.

Condition: ready for operation (used), Year of construction: 2015, Brand: HSM Iaedpsyt E Acsfx Aalsp Model: V-press 860 max Year of manufacture: 2015 Pressing force: 418 kN Voltage: 400 V Max. bale weight: 430 kg (depending on material) Bale dimensions: 120 x 110 x 85 cm Machine weight: 2,083 kg Machine dimensions: 180 cm x 125 cm x 298.5 cm Filling opening: 120 cm x 65 cm Condition: Very good! Functionality tested. FLITS Rental & Sales service: Each machine comes with a bundle of baling wire (120 wires). Need more wire bundles? Request a non-binding quotation.

Condition: used, total width: 1,300 mm, total height: 3,850 mm, total length: 2,200 mm, Price: On request - Year: 8 - Documentation available: No - CE certificate present: No - Serial number: 307 - Transport dimensions: 2200mm x 1300mm x 3850mm (l x w x h) - Transport packages [pcs.]: 1 Iaedpfx Ajym Uxtjalsp Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2019, operating hours: 433 h, functionality: fully functional, Vertical baler HSM V-Press 860 plus, year of manufacture 2019 Technical specifications: Manufacturer: HSM Model: V-Press 860 plus Year of manufacture: 2019 Operating hours: 433 Pressing force: 60 t Drive power: 4 kW Filling opening: 1195 x 645 mm Filling height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Bale weight: 480 kg Tying: manual Theoretical cycle time (idle): 25 s Theoretical press capacity: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (WxDxH) Weight: 2213 kg Materials: Film, paper, cardboard, punching waste, textiles, big bags, polystyrene Remarks: The baler is in very good condition. Please note: All technical specifications are based on the manufacturer's information. We accept no liability for the accuracy of the data provided or for any errors. Offers are subject to change, prior sale reserved and may be withdrawn at any time. Inspection by appointment possible. Iaedpfxjyrngnj Aaljp The sale is ex location, without warranty or guarantee. Our payment terms are 100% advance payment.

Condition: excellent (used), Year of construction: 2019, operating hours: 311 h, functionality: fully functional, Vertical baler HSM V-Press 860 plus, year of manufacture 2019 Technical specifications: Manufacturer: HSM Model: V-Press 860 plus Year of manufacture: 2019 Operating hours: 311 Pressing force: 60 t Drive power: 4 kW Feed opening: 1195 x 645 mm Filling height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Bale weight: 480 kg Binding: manual Theoretical cycle time (idle): 25 s Theoretical output: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (W x D x H) Iodpfx Aajyrnfkoljap Weight: 2213 kg Materials: film, paper, cardboard, punching waste, textiles, big bags, styrofoam Note: The press is in very good condition. Please note: All technical data is based on information provided by the manufacturer. We do not assume any liability for the information given or for any possible errors. All offers are non-binding, subject to prior sale, and can be withdrawn at any time. Inspections are possible by arrangement. The sale is ex-location, without warranty or guarantee. Our payment terms: 100% advance payment.

Condition: excellent (used), Year of construction: 2019, operating hours: 119 h, functionality: fully functional, Vertical baler HSM V-Press 860 plus B, year of manufacture 2019 Technical data: Manufacturer: HSM Model: V-Press 860 plus B Year of manufacture: 2019 Operating hours: 119 Pressing force: 60 t Drive power: 4 kW Filling opening: 1500 x 651 mm Filling height: 1129 mm Bale size: approx. 1500 x 1200 x 780 mm Bale weight: 550 kg Tying: Manual Theoretical cycle time (idle): 25 s Theoretical press performance: 32.5 cbm/h Dimensions: 2099 x 1245 x 2985 mm (W x D x H) Weight: 2340 kg Materials: film, paper, cardboard Note: The baler is in very good condition. Please note: All technical data is based on the manufacturer's specifications. We do not assume any liability for the information provided or possible errors. Iasdpfx Aajyrfl Islsp All offers are subject to change, prior sale reserved, and may be withdrawn at any time. Inspections by appointment only. The sale is ex location, without warranty or guarantee. Our payment term is 100% advance payment.

Condition: good (used), Year of construction: 2012, The pre-shredder (upper section) is not included in the offer. Only the lower part is offered. Paper baler / baling press PRESTO CC 40 V Manufacturer: PRESTO GmbH & Co. KG Machine type: CC 40 V Machine number: 28074 Year of manufacture: 2012 Empty weight: 4,200 kg Max. operating pressure: 260 bar Protection class: IP55 Rated current: 30 A Isdsyrt T Tepfx Aalsap Rated voltage: 400 V, 50 Hz Rated output: 15 kW Electrical connection: 35 A gG Machine type: horizontal baling press for paper and cardboard

Condition: used, Year of construction: 2006, Meulenbroek LPC20L Available for sale or rental. Price is the monthly rental rate. Can be painted in company colours. Ijdpfxoyrruce Aalsap Technically in good condition!

Condition: new, The briquette press is designed for compressing all types of sawdust and wood shavings into briquettes. The briquetting press features a compact, user-friendly design and is manufactured in Germany. The large oil tank enables continuous operation. The briquette press is ready for immediate use – simply plug it in and start working. Iaedpfxsyr Tpne Aalep

Condition: reconditioned (used), Year of construction: 2005, functionality: fully functional, pressing force: 90 t, filling opening width: 1,620 mm, filling opening length: 972 mm, bale width: 720 mm, bale height: 1,100 mm, bale weight: 600 kg, overall weight: 32,000 kg, pressure: 300 bar, power: 110 kW (149.56 HP), BOA baler with double pre-press flaps available in fully refurbished condition. The machine is located at our workshop in Almelo and can be inspected by appointment. If required, a matching (new) conveyor belt can be produced. The machine is perfectly suited for baling various materials such as cardboard, paper, plastics, car tires, and RDF. The machine is equipped with a so-called refu-ram. This is ideal for baling materials such as plastic bottles and/or shredded RDF. Technical specifications: Drive: 2x 55 kW Pressing force: 90 tons Iodpoxbc U Dsfx Aaljap Bale dimensions: 1100 x 720 mm Bale weight: approx. 600 kg (depending on material) Number of tying wires: 5 vertical