Used Krusi Cm 40 for sale (31,231)

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, KRÜSI chalet building machine / log house production line type CM 40 Year of construction 2002 Krüsi CM40, consisting of the following components: Circular saw ( cross-cut saw ) Horizontal and vertical log house router Groove milling machine (horizontal) boring mill Infeed table 6m Outfeed table 6 m KRÜSI chalet building machine / log house production line type CM 40 Manufacturer Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of manufacture 1996 CE-marked Ie Dkovfv Tfjk Ddfetk Condition: good, technically checked and cleaned / ready for use Functional principle Processing of wood for chalet construction / log house construction The beams can be processed in a single operation - Cutting to length - Horizontal and vertical milling of necks / grooves in one clamping operation - Drilling - Milling the face grooves Workpiece: - Cutting height max. 200mm - Cutting width max. 250mm Ksdpfx Aijzvrf Ioajdt Robust construction in welded design. Machine (horizontal and vertical milling unit) with 4 special milling motors, with hardened and ground guides for maximum machining accuracy. Slide guidance with dust-protected and preloaded ball-bearing rollers. Working range up to 200 x 250 mm. Completely ready for use, with contactor control, motors protected by thermal relay. Electrical equipment for voltage 380 V, 50 Hz, with protective covers, Central connection for on-site chip extraction, with 2 eccentric clamps, without milling tool (folder). With hydropneumatic horizontal and vertical feed, electrically controlled, together with the start-up of the milling motors. Rapid traverse and feed infinitely variable. Fully wired and installed, including air maintenance unit. Patches with a thickness of more than 14 cm must be processed in two tensions. Machine description / equipped with: 1. sawing unit: Manual feed Spindle adjustment with analog dimension display Saw blade-Ø max. / bore-o 400 / 30 mmm Carbide-tipped with cutting depth limiter (synchronous operation) Adjustable riving knife Motor speed min. 1 / 2900 Power kW 2.2 2nd CM milling unit ( log house unit ) Hydropneumatic feed Spindle adjustment with digital dimension display Horizontal trimming unit Milling cutter Ø 180mm Milling cutter width max.130mm From cutter width 60 mm only use aluminum alloy cutters with reversible cutting edges 2 hydropneumatic feed motors kW 2.2 each Hydropneumatic feed Rapid traverse and work feed infinitely adjustable 3rd drilling unit: Manual feed Spindle adjustment with analog dimension display Drill holder collet ER 25 Clamping Ø max. mm 16 Drill Ø max. mm 32 Motor min'1 1450, kW 1.8 4. face milling unit Hydropneumatic feed Spindle adjustment with digital dimension display Cutter Ø max. mm 230 Cutter width max. mm60 Motor min1 / 2900, kW 3.0 2 V-belts SPZ 9.5x1000 La Pneumatic Operating pressure on site min/max MPa (bar) 0.7/1 (7/10) Air consumption Nm3/h 8 Electrical system Operating voltage V / Hz 380, 50 Rated power kW 8.8 -15.8 depending on version On-site back-up fuse A 3 x 25 tr

Condition: good (used), Year of construction: 1994, I sell the automatic CNC working centre for BLOCK-HOUSE production Krüsi CM-40. Year 1994. Incutting saw Tenoning head Top + Bottom Tenoning head Left + Right Dowel drilling unit 4-head milling unit Automatic feeding system +-1mm Entry length 12m Kjdpfjr Atcyjx Aiajdt Suitable for wooden house constructions! Available immediately.

Condition: used, Year of construction: 2010, Chalet construction machineused, good condition, little usedmake Krüsitype CMI 40year of manufacture 2010CE type-approvedbsi 140 mm round timber corner jointssaw 1xdrilling 1xrouting 3xworkpiece height 200 mmworkpiece width 250 mmweight approx. 2200 kgTotal connected load approx. kWStorage location 97447 Gerolzhofen, free loaded, unpackedHandover in actual condition as inspected,without guarantee and warranty Kodpjvwfqqjfx Aiasdt

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Short-term availability – THE OPPORTUNITY! We are offering our well-maintained and fully operational chalet machine from the renowned Swiss manufacturer KRÜSI for sale. As we are switching to another model, you now have the chance to acquire this flawless machine. It is still in use, so functional testing and trial runs are welcome at any time. Dismantling and collection by buyer Assembly in consultation with Krüsi recommended Kodpfx Asy Ri Husiaodt Machine year: 2018, in operation since 2019 Total length with tables approx. 35.5 m Available from 08/2026 Machine details: - 4 milling units, each 4 kW, spindle drive via toothed belt - Maximum working range: 250 mm construction height and 245 mm wall thickness - 6 frequency converters for soft start and motor braking - Automatic work cycle and pneumatic workpiece clamping - Siko position indicators on adjustment spindles for horizontal operation - Pneumatic under-table crosscut saw, left, 5.5 kW with frequency converter - Hand-operated drilling unit 1.8 kW, mounted on the right column - Hydropneumatic feed for drilling unit - Additional pneumatic vertical clamping cylinder with bracket - Additional pneumatic horizontal clamping cylinder with bracket - Auxiliary table for milling unit with additional vertical clamping cylinder - Stop rail 0.5 m, mounted at the front left of the machine frame - Stop rail 0.5 m, mounted at the front right of the machine frame - Auxiliary table for short workpieces - Steel chip funnel for pit extraction - Dovetail and end-groove milling machine (with pneumatic rotary axis) Milling and drilling tools: For horizontal milling units: - WPL rabbet cutter Ø 180 mm, adjustable range 61-240 mm x 40 mm, Z=2 For vertical milling units: - WPL rabbet cutter Ø 230 mm, adjustable range 61-240 mm x 40 mm, Z=2 - WPL rabbet cutter Ø 270 mm, adjustable range 61-240 mm x 40 mm, Z=2 For drilling unit: - Drill Ø 20 mm, with long centering tip - Drill Ø 30 mm, with long centering tip For 90° swiveling dovetail and end-groove milling machine: - WS rabbet cutter Ø 230 mm, bottom Ø 40 mm, width 40 mm - WS dovetail cutter 20°, 92 x 36.5 x IG M 24 left, Z3, V3, F3 with chip-breaker grooves, MK 863-1 - WS dovetail cutter 20°, 92 x 36.5 x Ø 30 mm, Z3, V3, F3 with chip-breaker grooves, MK 863-2 - Clamping wrench for above dovetail cutters Accessories: Horizontal above: - WS slot and tenon cutter alu Ø 270 mm, bore Ø 40, adjustable range 21-40 mm - Center part alu Ø 270 mm, width 30 mm, bore Ø 40, Z2 - Center part alu Ø 270 mm, width 50 mm, bore Ø 40, Z2 Horizontal below: - WS adjustable rabbet cutter alu Ø 180 mm, bore Ø 40, adjustable range 26-50 mm, 2 x Z3 F3 - Center part alu Ø 180 mm, width 40 mm, bore Ø 40, Z2 Vertical front: - WS slot and tenon cutter alu Ø 270 mm, bore Ø 40, adjustable range 21-40 mm - Center part alu Ø 270 mm, width 40 mm, bore Ø 40, Z2 Vertical rear: - WS adjustable rabbet cutter alu Ø 180 mm, bore Ø 40, adjustable range 26-50 mm, 2 x Z3 F3 - Center part alu Ø 180 mm, width 30 mm, bore Ø 40, Z2 - Safety guard for horizontal above with holder (for cutter Ø 270 mm) - Safety guard for vertical rear with holder (for cutter Ø 180 mm)

Condition: ready for operation (used), Year of construction: 2016, clamping force: 350 kN, total width: 1,973 mm, total height: 3,040 mm, overall weight: 5,200 kg, product length (max.): 1,300 mm, Vertical injection moulding machine manufactured in 2016. This Battenfeld CM 40 features a machine weight of 5200 kg and a working height of 1000 mm. The machine is equipped with a robust safety system, ensuring operational safety. If you are looking to get high-quality injection moulding capabilities, consider the Battenfeld CM 40 machine we have for sale. Contact us for further details. Ksdpfx Aioztdwwjaodt - CM 40/130V/60V Unilog B6- Hydraulic System Pressure: 247 / 210 bar- Pneumatic System Pressure: 6 bar- Rated Voltage: 400 V (3~N)- Control Voltage: 24 V DC- Frequency: 50 Hz- Rated Current (1st supply / 2nd supply): 78 A / 73 A- Max. Fuse Rating gl-gG (1st / 2nd supply): 80 A / 80 A- Short Circuit Current Rating SCCR: 10 kA- Working Height: 1000 mm- Total Height: 3040 mm- Machine Base Footprint: 1300 mm x 1060 mm- Total Width (including safety door swing): 1973 mm- Safety System: SICK C4000 light curtain barrier- Mold Clamping Dimensions: CM400, EBH-100, Width-100

Condition: good (used), Year of construction: 2000, functionality: fully functional, Wide belt sander SCM Sandya 40 M1 Year of manufacture 2000 S/N AE/020761 Manufacturer SCM Group S.p.A Italy Sanding width 1.350 mm Workpiece thickness min 4-170mm 1 sanding unit, calibration 250mm diameter Roller hardness °Shore 55 Vacuum table Main motor 11 kW ( 15 HP) Sanding belt length 2,620 mm Feed max 19 m/min Feed stepless Fixed working height 900 mm Sanding belt blow-off device Electropneumatic segment control Belt change side left SYEL CN 51 control unit Carpet feed with speed controller Electronically controlled sanding belt oscillation Main motor with disk brake Rubber-coated pressure rollers Automatic carpet centering Automatic table positioning Air requirement Nl/min 15 Operating voltage 400V/ 50 Hz Total power 40 Amp Kdedpfx Astttafsiajt Dimensions: L x W x H= 1917mm x 2134 x 2365mm Weight approx. 2540 kg

Condition: used, functionality: fully functional, Year of construction: 2005, control type: manual, degree of automation: manual, actuation type: mechanical, sheet thickness (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness steel (max.): 5 mm, sheet thickness stainless steel (max.): 3 mm, overall weight: 13,200 kg, Equipment: emergency stop, finger protection, type plate available, - Model: CM 4005 - Year of manufacture: 2005 - Condition: used - Technical data: Weight 13,200 kg, Cutting length 4,050 mm, Blade length 4,200 mm, Working area 4,200 mm, Material thickness: Steel 5.0 mm, Aluminum 6.0 mm, Stainless steel 3.0 mm - Advantages: - High precision and reliability - User-friendly operation - Low maintenance and durable We offer a Colgar CM 4005 mechanical plate shear from 2005 for sale. The machine is designed for precise cuts with a cutting length of 4,050 mm and a blade length of 4,200 mm, and it allows for a working area of up to 4,200 mm. With a weight of approximately 13,200 kg, the shear is characterized by its robust industrial design. The Colgar CM 4005 is suitable for cutting various materials, including steel up to 5.0 mm thick, aluminum up to 6.0 mm thick, and stainless steel up to 3.0 mm thick. Several yellow clamping fingers along the cutting edge secure the material during operation. The front of the machine features a metal table with attached metal bars. The user-friendly control panel is equipped with a digital display and several colored buttons, including an emergency stop switch. Currently, "MANUAL 9.18" is displayed, which indicates the manual operating mode. The shear is painted blue and clearly displays the COLGAR logo. Signs of use, such as paint chips and superficial dirt, are present and correspond to the usual condition. These do not appear to affect the structural components but should be considered when assessing the machine. Kjdpfx Aiszik E Teajdt Overall, the Colgar CM 4005 mechanical plate shear offers high precision and reliability in a robust design that is suitable for a variety of metalworking applications. It is a low-maintenance machine for industrial use that combines a solid construction with practical features to increase operational efficiency. The following description is for guidance only and may not reflect all specifications or conditions. Please contact us if you require accurate or confirmed details. “The machine is sold in accordance with Incoterms® 2020 EXW [Frankenweg 2, 9100 Völkermarkt]. Once the machine is made available at the designated location, the buyer bears all costs and risks, including loading, transport and customs formalities.”

Condition: ready for operation (used), Year of construction: 2016, operating hours: 9,895 h, functionality: fully functional, machine/vehicle number: 121-02396, total height: 2,200 mm, overall weight: 4,000 kg, total length: 2,500 mm, total width: 2,000 mm, input voltage: 400 V, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between October 7, 2026, and October 14, 2026! TECHNICAL DETAILS Drum diameter: approx. 1,450 mm MACHINE DETAILS Input voltage: 400 V Input frequency: 50 Hz Input current: 9 A Dimensions & Weight Kjdozu Ix Uopfx Aiajdt Dimensions (L x W x H): 2,500 x 2,000 x 2,200 mm Total weight: 4,000 kg Operating hours: 9,895 h

Condition: used, This used META shelving unit is a compact and flexible storage solution for workshops, warehouses, archives, and businesses. With a height of 250 cm, a depth of 40 cm, and a total of 6 storage levels, the shelving unit offers sufficient space for the organized storage of boxes, containers, spare parts, and other storage items. The modular shelving system can be used in a variety of ways and enables efficient use of the available storage space. 100.06 linear meters of shelving units, 40cm deep, used, workshop shelving, warehouse shelving, hand-stacking, boltless shelving, small parts storage. Kodpfxjzy Utio Aiajdt Data: - Height: approx. 250 cm - Depth: approx. 40 cm - Length: approx. 100.06 linear meters Shelving offer of 100.06 linear meters consisting of: - 0101 x uprights approx. 200 x 40 cm, pre-assembled - 0600 x shelves approx. 100 x 40 cm. - 2400 x shelf supports. - 0100 x cross braces - Manufacturer: META CLIP. - Load capacity: 100 kg per shelf, with evenly distributed load. - Levels: 6 storage levels. - Surface: Sendzimir galvanized. - Used, available from stock -- IMMEDIATELY AVAILABLE IN MULTIPLE UNITS -- Price: €7,118.00 net plus legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery can be arranged via our partner logistics company, if desired. The costs depend on the postal code. Assembly: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment, if required. Our recommendation: Let us know your requirements... We will be happy to help you realize your projects, from planning to ordering to assembly. Are you interested or do you have any questions? Simply contact us via message or phone. You will find our telephone number on our company page. ☎️ You can reach us by telephone from Monday to Friday, 08:00 - 15:00. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Condition: good (used), Year of construction: 2018, Ref. -No.: 10531 Manufacturer: HONOR SEIKI Type: VL - 400CM Year of construction: 2018 Type of control: CNC-Steuerung Control: Siemens SINUMERIK 840D Storage location: Halberstadt Country of origin: Taiwan Machine-No.: 79XXX C-Axis: Yes C-axis speed: 50 - 2250 RPM Turning Height: 2370 mm Table Diameter: 4000 mm Rapid Travel Speed X-Axis: 10 m / min Rapid Travel Speed Z-Axis: 10 m / min Rotate table rotation speed: 1 - 85 RPM Max. Workpiece Weight: 30 kg Kdsdjzx Nx Depfx Aiajt Max. Turning diameter: 4 mm Distance between faceplate and crossbar support: 820-3320 mm Work feed: mm / min Number of tools in the chain magazine: 24 Crossbar adjustment: 300 x 300 mm Spindle motor drive: AC60/75/100 kW Servo motors (X/Z axes): 5,5 / 5,5 kW Machine length: 9 mm Machine width: 7000 mm Machine Height: 8000/9100 mm Weight Of The Machine Ca.: 115 t Further information: - 2-stage gear change - ATC (Automatic Tool Change) 16/20/24 - Tool size 25 x 32 x 40 - Driven tool motor AC15/18.5 Machine is still in production and can be inspected by appointment.

Condition: like new (used), Year of construction: 2024, Twin lane linear weigher. All stainless steel. Kdsdox Hgb Ijpfx Aiast

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 620 mm, travel distance Z-axis: 2,000 mm, bar diameter (max.): 110 mm, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 3, Horizontal turning machine manufactured in 2007. This BOEHRINGER VDF 400 CM features a 500 mm chuck and a live tool for enhanced versatility. It offers an impressive X-axis travel of 620 mm and Y-axis travel of 2000 mm. If you are looking to get high-quality turning capabilities, consider the BOEHRINGER VDF 400 CM machine we have for sale. Contact us for further details. Kjdpfjzzp Aujx Aiaodt • Chuck diameter: 500 mm Technical Specification Driven Tools Yes Counter Spindle No

Condition: used, backhoe bucket, excavator bucket, trenching bucket, excavator bucket, ejector bucket, ejector bucket -Excavator bucket: hydraulic ejector bucket, heavy duty -Width: 400mm -Height: 830mm -Depth: 1330 mm -Inner mounting width: 240/270 mm -Hole: bore Ø 72/60 mm, dimensions see photos -the holder on the spoon: can be changed by us for an additional charge Kdjdstvb Enjpfx Aiajt -Transport dimensions: 1330/400/H1050 mm -Weight: 289 kg

Condition: good (used), Year of construction: 1989, functionality: fully functional, Robust BÜRKLE multi-layer press / veneer press with two pressing levels and electrically heated press plates. The separate control of the heating plates allows the temperatures to be adjusted according to the specific application. The press is suitable, among other things, for veneering, gluing, and coating wood-based materials. The middle heating plate can be heated up to approximately 50 °C, and the maximum temperature of the other heating plates is approximately 100 °C. Technical data Year of manufacture: 1989 Pressing area: approx. 1,200 × 800 mm Opening: approx. 385 mm Pressing pressure: approx. 40 N/cm² Number of pressing levels: 2 Number of press plates: 3 Heating: electric Max. temperature: approx. 100 °C Middle heating plate: up to approx. 50 °C Heating plates can be controlled separately Equipment 2 pressing levels 3 heating plates electric plate heating separate heating plate control Kdodpoz Dfzvofx Aiaot hydraulic pressing system massive steel construction The machine is still at the previous owner's location but would be immediately available. The press can be inspected and tested under power after scheduling an appointment. Transportation is possible for an extra charge! Note The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale, and changes are subject to confirmation. All information without guarantee.

Condition: used, This used META shelving unit is a compact and flexible storage solution for workshops, warehouses, archives, and businesses. With a height of 250 cm, a depth of 40 cm, and a total of 6 storage levels, the shelving unit offers ample space for the organized storage of boxes, containers, spare parts, and other storage items. The modular shelving system can be used in a variety of ways and enables efficient use of the available storage space. 30.06 linear meters of shelving, 40 cm deep, used, workshop shelving, warehouse shelving, manual storage, plug-in shelving, small parts storage. Data: - Height: approx. 250 cm - Depth: approx. 40 cm - Length: approx. 30.06 linear meters Shelving offer of 30.06 linear meters consisting of: - 031 x uprights approx. 200 x 40 cm, pre-assembled - 180 x shelves approx. 100 x 40 cm - 720 x shelf supports - 030 x cross braces - Manufacturer: META CLIP - Load capacity: 100 kg per shelf, with evenly distributed load Kdjdpozy Uycofx Aiaet - Levels: 6 x storage levels - Surface: Sendzimir zinc-plated - Used, available from stock -- IMMEDIATELY AVAILABLE IN MULTIPLE UNITS -- Price: €2179.00 net plus applicable VAT You will receive an invoice with VAT shown. Transport: Delivery can be arranged through our partner shipping company upon request; the costs depend on the postal code. Assembly: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment, if required. Our recommendation: Please let us know your requirements… We will be happy to help you with the implementation of your projects, from planning and ordering to assembly. Are you interested or have any questions? Simply contact us via message or phone call. Our phone number can be found on our company page. ☎️ You can reach us by phone from Monday to Friday, 08:00 - 15:00. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Condition: used, Year of construction: 2012, operating hours: 32,200 h, The machine offered is an ENGEL VC 200/40 Tech, manufactured in 2012. Kdodpfsz Ap Imjx Aiaot The machine is currently connected to the power grid. Technical specifications: Manufacturer: ENGEL Model: victory 200/40 tech Year of manufacture: 2012 Control system: ENGEL CC 200 Operating hours: approx. 32,200 h Clamping force: 400 kN / 40 t Screw diameter: 30 mm Injection pressure: 1,451 bar Displacement: 99 cm³ Platen size: 500 × 450 mm Tool height: 200 mm Opening stroke: 400 mm Max. platen distance: 600 mm Centering: 125 mm Ejector stroke: 100 mm Nozzle thread: M28 × 1.5 Smallest tool size: 280 mm Power: 15 kW Machine weight: approx. 2,900 kg Core pull: 1 Air ejector: 2 RSP: 3-part Design: tie-bar-less ____ Wittmann W702 picker / handling device Manufacturer: Wittmann Type: W702 Year of manufacture: 2012 Serial No.: 0000171976 Article No.: 7F00000506 X-axis: 100 mm Y-axis: 550 mm Z-axis: 90° Weight: approx. 52 kg Voltage: 105–250 V Current consumption: 1.6 A According to the available Wittmann documentation, the handling device has been refurbished. After completion of the work, a functional test and test run were carried out with the result "OK". _____ Cooling unit Manufacturer: aic regloplas GmbH Model: TAE EVO 081 Year of manufacture: 2006 Serial No.: 2200 086 152 Connection: 400 V / 3 Ph / 50 Hz Rated power: 11 kW Max. current consumption: 19 A Protection class: IP54 Max. operating pressure, water circuit: 6 bar Max. water temperature: 65 °C Refrigerant: R407C Refrigerant quantity: 5.5 kg Weight: approx. 331 kg _____ Scope of supply ENGEL victory 200/40 tech injection molding machine Wittmann W702 picker / handling device aic regloplas TAE EVO 081 cooling unit Inspection is possible by appointment. Dismantling and loading are the responsibility of the buyer! The machine is located in Bremen. _____ Subject to prior sale and errors in technical specifications. The technical specifications have been compiled to the best of our knowledge, but do not constitute guaranteed characteristics. Our general terms and conditions apply; the seller is not liable for typing or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are consistent with their age. Used machines are sold exclusively to commercial customers and without warranty.

Condition: good (used), Year of construction: 2012, functionality: fully functional, conveyor belt length: 2,200 mm, conveyor belt width: 400 mm, Length 220 cm Kdjdpfx Ajxtvcrjiajt Width 40 cm

Condition: used, Year of construction: 2008, functionality: fully functional, volume flow: 40 m³/h, centrifugal vertical cantilever pump chemical pump FIP ALPHA 65-40 V2CM Kdsdpfxeufhzpo Aiajt year of construction: 2008 DN: 50 Nominal flow rate 40 m³/h Nominal head: 45 m p [track]: 16 T [°C]: -25 ÷ + 140 Turn number: 1470 electrical power 16.5KW 400V 50Hz 34.7A engine speed: 1470 Implementation: vertical, radially split scroll casing pumps sump pump or channel impeller Applications: treatment of paints, aggressive and technological fluids, even in the presence of solid particles, in the chemical and petrochemical industries length: 1700mm width: 700mm weight: 450 kg

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: H-64094, travel distance X-axis: 1,630 mm, travel distance Y-axis: 860 mm, travel distance Z-axis: 760 mm, controller model: Ultimax, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,630 mm Travel range, Y-axis: 860 mm Travel range, Z-axis: 760 mm Spindle speed: 10,000 rpm Working area: 1,676 x 889 mm Load capacity: 2,722 kg Kedpfx Aiozx N Thjasdt Max. tool diameter: 75 mm Max. tool diameter with free adjacent tool positions: 127 mm Max. tool length: max. 300 mm MACHINE DETAILS Control system: Ultimax Tool positions: 40 EQUIPMENT Spindle cooling Chip conveyor

Condition: used, The machine is ready for operation Kdedpfx Aexpi N Doiaet

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Electric pump, all-steel floor, parabolic suspension +100km/h Equipment: -8 tie-down points -5-stage cylinder -Electric pump Net: €7,844.54 / Gross: €9,335.00 Article number: CHM235371811.24 Kdodpfx Aszu N Nuoiaet Technical data: • Brand: Hapert Trailers • Model: Cobalt HM-2 Ferro • Vehicle type: Three-way tipper • Vehicle condition: New • First registration: Without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 375 x 180 x 40 cm • External dimensions (LxWxH): 511 x 186 x 109 cm • Loading height of the floor: 69 cm • Permissible total weight: 3,500 kg • Unladen weight: 1,072 kg • Payload: 2,428 kg • Chassis: Low loader (wheels under the body) • Tires: 195/50R13C • Suspension: KNOTT parabolic suspension + 100 km/h • Support wheel: Yes, automatic, 500 kg • 100km/h approval: Yes DESCRIPTION • New side panel hinges incl. welded-on hooks for securing, among other things, a cargo net. • Aluminum side panels with robustly installed latches • Aluminum side panels anodized double-walled • All side panels can be folded down and removed • Steel corner posts removable • Socket option at all 4 corners for tarpaulin frames, grid attachments, side panel attachments, or front wall extension • Cargo net hooks on hinge lower parts • Stable eccentric latches • All-steel floor 3mm hot-dip galvanized – extremely robust • Reinforced, heavily bolted V-drawbar • Very stable steel frame welded • Frame completely hot-dip galvanized • Many cross members, resulting in high point load capacity • Additional longitudinal struts continuously welded in • All cross and longitudinal members rest on the ground • 8 tie-down loops recessed inside the side frame (1000DaN/kg) TÜV certified! • U-profile on the rear for easier attachment of the ramps • Ramp shaft prepared • Solid 5-stage hydraulic cylinder • Electric hydraulic pump with battery (12V/90AH) in the box incl. cover • Detachable remote control for electric hydraulics with spiral cable and battery status display • External battery charging socket for optional 230V charger • Parabolic axle from KNOTT • Shock absorbers for 100km/h mounted • Parabolic axle for absolute driving comfort! • Reversing automatic • KNOTT inertia brake and parking brake • 13-pin plug • Reversing lights • Large-sized safety lighting • Integrated rear fog lamp • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to inquire about specific requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or short-term registration plates (Germany) can be provided. - Export registration plates incl. customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been a specialist dealer and repair workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Errors, omissions and prior sale are reserved.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, ABB Robotics IRB 1400 robot, complete Controller: S4C-M98 Max. working radius: approx. 1450 mm Payload: 5 kg Year of manufacture: 1998 Scope of delivery: Robot, controller, cables, teach pendant, operating manual, wiring diagrams. Used item – normal signs of wear and tear. Further details, article numbers, and images available upon request. Two weeks commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. Kedpfxszmrn Re Aiaodt The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with VAT shown. Collection on-site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on quantity, weight, and desired delivery conditions. Shipping costs to foreign countries upon request – please provide country, city, and postal code. Freight costs upon request – please provide the delivery address.

Condition: ready for operation (used), Year of construction: 1997, travel distance X-axis: 620 mm, travel distance Z-axis: 2,000 mm, bar diameter (max.): 110 mm, controller manufacturer: SIEMENS, controller model: 840C, number of axes: 3, Horizontal turning machine manufactured in 1997. This BOEHRINGER VDF 400 CM features a maximum chuck diameter of 500 mm, an X-axis travel of 620 mm, and a Z-axis travel of 2000 mm. It is equipped with a live tool for enhanced functionality. If you are looking to get high-quality turning capabilities, consider the BOEHRINGER VDF 400 CM machine we have for sale. Contact us for further details. • Chuck: 500 mm Technical Specification Kedpfx Aiozx Tkqjajdt Counter Spindle No Driven Tools Yes

Condition: new, *IMMEDIATELY AVAILABLE* Includes: E & emergency hand pump, steel side walls Equipment: - Full steel floor - Steel side walls Net: €7,974.79 / Gross: €9,490.00 Article number: HTK235361840.01 Technical data: • Brand: Humbaur • Model: HTK 3500.37 • Vehicle type: Three-way tipper • Vehicle condition: New vehicle • First registration: without first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (L x W x H): 362 x 185 x 40 cm • External dimensions (L x W x H): 514 x 200 x 125 cm • Loading height of the floor: 76 cm • Permissible total weight: 3,500 kg • Unladen weight: 1,086 kg • Payload: 2,414 kg • Chassis: Low loader (wheels under the body) • Tires: 195/50R13C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Double-walled steel side walls • All side walls can be folded and removed • Removable steel corner posts • Rear flap can also be pivoted • Insertion option on all 4 corners for tarpaulin frames, grid attachments, side wall attachments or front wall extension • Stable toggle latches • Full steel floor - extremely robust • Very stable screwed V-drawbar, REINFORCED • Very stable steel frame, welded • Frame completely hot-dip galvanized • Many cross members, resulting in high point load capacity • Additional longitudinal struts continuously welded in • Electric hydraulics for tipping, with battery in the box and cover • 71AH battery • Battery is charged via a 13-pin plug from the towing vehicle (provided that all pins of the socket are occupied) • External battery charging socket for 230V charger • Emergency hand pump for manual tipping in case of empty battery • 8 recessed tie-down eyes inside on the side edge (800 DaN/kg), TÜV certified! • Solid 4-stage hydraulic cylinder • Maintenance-free rubber spring axles from ALKO • Reversing automatic • ALKO overrun device and parking brake • Ramp storage compartment as preparation for aluminum ramps for easy retrofitting • 13-pin plug • Reversing lights • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel, centered Kodpjzy A Sajfx Aiasdt _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request any modifications! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, operating hours: 8,451 h, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 40 t, stroke length: 170 mm, operating speed: 10 mm/s, reverse speed: 170 mm/s, table width: 90 mm, table length: 1,270 mm, table height: 850 mm, throat depth: 350 mm, clearance between the columns: 1,050 mm, oil tank capacity: 80 l, total length: 2,150 mm, total width: 1,650 mm, total height: 2,300 mm, overall weight: 3,250 kg, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, safety light barrier, 2016 Ermaksan Speed-Bend Pro 1270 x 40 CNC Press Brake – 6 Axis – Delem DA-66Te Control Used 2016 Ermaksan Speed-Bend Pro 1270 x 40 CNC hydraulic press brake for sale in Ireland. 6-axis CNC press brake with Delem DA-66Te graphic control, Y1, Y2, X, R, Z1 and Z2 axes, tooling, laser guards and only 8,451 hours. Manufacturer: Ermaksan Model: Speed-Bend(SB) Pro 1270 x 40 Axes: 6 Year: 2016 Capacity: 1270mm x 40T Control: Delem DA66Te Description 2016 Ermaksan Speed-Bend Pro 1270 x 40 CNC Press Brake, a compact, high-quality 6-axis CNC hydraulic press brake ideal for precision sheet metal bending, fabrication workshops, engineering companies and production environments. This Ermaksan Speed-Bend Pro 1270 x 40 offers a bending length of 1270 mm and a bending power of 40 tonnes. It is fitted with a Delem DA-66Te graphic CNC control, providing a clear touch-screen interface for accurate programming, bend sequence calculation, tooling setup and repeatable production bending. The machine is in very good condition and has completed only 8,451 hours. It comes complete with Euro-style top and bottom press brake tooling, laser guards, foot pedal, quick-release top tool clamps and rear safety doors, making it a well-equipped used press brake ready for immediate inspection and production use. This is a superb opportunity to purchase a late-model, compact Ermaksan CNC press brake with a desirable 6-axis specification, ideal for companies looking for a reliable used hydraulic press brake in Ireland, the UK or Europe. Key Features Manufacturer: Ermaksan Model: Speed-Bend Pro 1270 x 40 / SB PRO 1270-40 Year: 2016 Type: CNC hydraulic press brake Bending length: 1270 mm Bending power: 40 tonnes Axis configuration: 6 Axis CNC controlled axes: Y1, Y2, X, R, Z1 and Z2 Control: Delem DA-66Te Graphic CNC Control Hours: Only 8,451 hours Condition: Very good condition Tooling: Complete with Euro-style top and bottom tools Kjdpozdak Aofx Aiaodt Safety: Laser guards and rear safety doors Clamping: Quick-release top tool clamps Includes: Foot pedal Suitable for: Sheet metal fabrication, precision bending, general engineering, subcontract fabrication and production bending Technical Specifications – SB PRO 1270-40Model: SB PRO 1270-40 Bending length: 1270 mm Bending power: 40 tonnes Distance between columns: 1050 mm Y-axis rapid speed: 140 mm/s Y-axis working speed: 10 mm/s Y-axis return speed: 170 mm/s X-axis travel: 500 mm X-axis speed: 500 mm/s R-axis travel: 250 mm R-axis speed: 350 mm/s Z1 / Z2-axis travel speed: 1000 mm/s Backgauge finger blocks: 2 Oil capacity: 80 litres Motor power: 5.5 kW Stroke: 170 mm Daylight: 387 mm Throat depth: 350 mm Table height: 850 mm Table width: 90 mm Machine Dimensions: 2150 x 1650 x 2300mm Machine weight: 3250 kg Standard / Included Equipment This used Ermaksan Speed-Bend Pro press brake is supplied with: 6 CNC axes: Y1, Y2, X, R, Z1 and Z2 Delem DA-66Te graphic CNC control Euro-style top press brake tools Euro-style bottom press brake tools Laser safety guards Foot pedal Quick-release top tool clamps Rear safety doors Backgauge finger blocks Sheet support arms Notes: *Specifications are given in good faith but not guaranteed*