The Ballistic Stadler STT2000
Was in working order before being dismantled 4 years ago.
Shafts are fine.
Gwspyg
No Control Panel
No Supports
3409mm Long x 2410mm Wide x 1740mm high approximately
8000 Kg - 5000Kg
Zig-zag fine material separator
Cross section: approx. 650/170 mm
Onowx
For the separation of fines from the regrind
Equipment:
2x rotary valve type NU 250
With Vulkollan seal, each 0.37 kW,
1x material conveyor blower type MFT 75/500, 11 kW
Description: Huber Rotamat RO1 as a fine-compute export with clot and EX protection.
With spray nozzles and automatic pressing zone flushing.
The intended use of the RO1 is the separation of solids from waste water, compaction and washing out of the sifted computing material.
Application:- Wastewater treatment plants (municipal and industrial)
-Process and partial flows in industry
The machine had its last use in an urban sewage treatment plant, a washing press and another rake RO 1 Bj 2004 whi...
diameter: Nr.1: ca. 6 mm
diameter: Nr.1: max. 25 mm
diameter: mm
diameter: mm
Bqwsjwl
connection electric: 400 V
motor: Getriebemotor / gear motor
total power requirement: 0,25 kW
weight of the machine approx.: ca. 120 kg
space requirements approx. LxWxH: 0,85x0,6x0,1,0 m
Wire Peeling Machine
Application: peeling of electric wires
to be processed parts: wires with PVC coat / rubber coating
wire feed via angular rail 40mm on a length of 600mm
infeed manual
driver roller dia=80x21mm serrated
co...
The AMIS overband magnet is ideally suited for the continuous removal of loose metals or in inclusions. They can be used for the recovery (recycling) of metals and for the removal of unwanted metal parts (contamination). The AMIS overbelt magnets are used in belt direction or in transverse direction over flat or trough-shaped conveyor belts, whereby an arrangement in transverse direction is to be preferred because of the better metal separation. The metallic parts are pulled out of the basic mat...
Heavy material separator DE-Stoner type 1 Biopower
Standard equipment:
Diesel engine Kubota D1803-CR-TE5B / EPA Tier4 - EU Stage 5
3 cylinders, 37KW, tank capacity 63l, tank capacity oil 60l
automatic reversing of the upper screw for light materials
autom. reversing of the lower screw for heavy materials
manually adjustable speed of upper and lower screw
autom. speed control of upper and lower screw by hydraulic pressure
1.200 mm wide rear conveyor belt,
max. unloading height 3.800 mm
Boioefn7jg...
Model: STT_2000_101
Working hours: This ballistic has been in operation for less than 1 year
Screening Surface: 8,4 m² with 6 screening blades
Screening size: 60mm with square holes
Overall Length: 5 500mm
weight approx. 4000 kg
Useful Width: 2 400mm
Overall Width: 2 750 mm
Omc0l
Overall Height: 2 240 mm
Power: 4 kW
Weight: 4 000 Kg
dismantled on stock, ready for dispatch
Main drive 2 pcs. Angular gears 400 V, 50 Hz, 11 kW at 37 rpm.
dimensions of the device - width 3900mm, length 12970mm,
drum diameter 3000mm,
drum speed 8-9 rpm
0ao7s8qj
Description: Huber Rotamat RO2 as fine mesh version and EX-protection.
With spray nozzles and automatic press zone flushing.
The intended use of the RO1 is the separation of solids from waste water, compaction and washing out of the screened screenings.
Field of application:- Waste water treatment plants (municipal and industrial)
-process and partial flows in industry
The machine had its last use in a municipal sewage treatment plant.
Type: RO 2
Manufacturer: HUBER Technology
Year of constru...
Sell automatic sorter UniSort RTT P2000 with accelerator belt!
7vb2d0a
Technical specifications:
Year of construction - 2008
Connected load - 18 Kw
Max. Pressure - 10 bar
Scan width - 2000 mm.
Minimum grain size - 60 mm
Maximum grain size - 220 mm
Price on request!
The AMIS magnetic roller is used to separate iron impurities from the conveyed material. It is installed as an end roller in a conveyor belt and is therefore a very cost-effective metal separator. For higher material layers, a magnetic roller can be combined with an overband magnet. The magnetic roller works very effectively and is virtually maintenance-free.
Bgfdxrzzm
Duct cross-section 250 x 1600 mm, with Blower approx. 22 kW
Cnq3txvu
eddy current 800 mm wide
fully refurbished
Bnwmnpvekx
Adhesion rebound ballistic separator
Rubber belt width 1,400 mm
Geared motor power 7.5 kW
Speed from 0.60 to 2.50 m/s
Motorized tilting between 15° and 38°.
Inclination geared motor power 0.75 kW
Bmt7urzion
Description: Huber Rotamat RO1 as fine screen version and EX-protection.
With spray nozzles and automatic press zone flushing.
Flboetf20
The intended use of the RO1 is the separation of solids from waste water, compaction and washing out of the screened screenings.
Field of application:- Waste water treatment plants (municipal and industrial)
-process and partial flows in industry
The machine had its last use in a municipal sewage treatment plant, a wash press and another screen RO 1 which were ...
Very good metal separator (inductive sorter) for separation of all kinds of metal (incl. stainless steel). Can be used before ECS, behind or stand alone. Ejecting of all metals larger 0.5 / 1 mm possible. Reasonable using for material up to 60 % metal content.
Unique flap technology, no pressured air necessary. Machine is ready for using, can be visited or tested. If wished can be equipped with camera.
Bhfvuvntap
If the machine is too small we can build also bigger.
It is our demonstration machi...
Machine number: 8819
Gauss/Steinert overband magnet with switch cabinet
Kmd23rk
Dimensions: 800 x 2000 mm
Drive Geared motor 2.2 kW
BEYER - Light material separator
Dimensions (LxWxH) 6300 x 2500 x 2700 mm
Tare weight: 4500 kg
Performance: 40 - 60 sqm/hour
waterbed: 7 qm
Light material tape:
belt width: 1500 mm
Drive: Adjustable gear motor 1.5 kW
Heavy duty tape:
belt width: 1200 mm
Bzkfx8s0
Drive: Adjustable gear motor 5.5 kW
Sound pressure level: 78 dB(A)
2 pieces optical NIR sorter TOMRA TITECH AUTOSORT
Bnou3bab3d
Width 1000 und 1400 mm
Demo machines
Adhesion rebound ballistic separator
Rubber belt width 1,400 mm
Geared motor power 7.5 kW
Og38h
Speed from 0.60 to 2.50 m/s
Motorized tilting between 15° and 38°.
Inclination geared motor power 0.75 kW
Description: Huber Rotamat RO1 as fine screen with splash water connection and switch cabinet.
The intended use of the RO1 is the separation of solids from waste water, compaction and washing out of screened screenings.
The screenings are discharged into the centrally arranged screw conveyor when the clearing arm stops in the 12 o'clock position.
Type: FR RO 1
Manufacturer: HUBER Technology
Year of construction: 1992
documentation:
Status: used - satisfactory
Read operating hours: 3977 h
...
The KOMEJO NIR separator
Komejo builds and designs NIR separators according to its own design and experience. Komejo's NIR separator is also called an optical separator. A NIR separator uses infrared light to distinguish different types of materials. The KOMEJO NIR- SCHEIDER-NRS 2000 can blow a predefined material type out of the product flow. In addition to infrared technology, a colour camera can also be used to sort by colour (e.g. plastics). Several NIR separators can be incorporated into th...
Fine good leaver of series FAS after crushing processes are Fallstromsichter to the mill dedusting. An additional extraction unit ensures dust free transport of fine material to a separate container. Also has a maintenance door to the Fallstromsichter, and is therefore easily within a very short time to clean.
The fine goods carriers work in free fall and are very space-saving. This makes easy a subsequent integration into existing systems. The separation efficiency is adjustable infinitely ove...
• Manufacture No.: 007
Wyramlqr
• Drive: hydraulic by additional hydraulic connection
• New hydro motors for stars deck drive
• Only worked with shredded waste wood (pallets)
• Can be sold with Doppstadt DW 3060 Type F Bio Power from the same seller
2 pieces optical NIR sorter TOMRA TITECH AUTOSORT
Width 1000 und 1400 mm
Demo machines
G99gtp
Adhesion rebound ballistic separator
Rubber belt width 1,400 mm
Geared motor power 7.5 kW
Speed from 0.60 to 2.50 m/s
Motorized tilting between 15° and 38°.
Xycr8
Inclination geared motor power 0.75 kW
Type: D 900 PP
Manufacturer: Leop. Siegle
Year of construction: 2010
Documentation: no
Viewing: yes
Storage location: Cold hall
Status: used - good
Pressure: 100 mbar (permissible operating pressure absolute)
volume: 0.8 m³
Temperature: 60 °C (mac.)
Connections: 1x DN25 1x DN100 (top)
-: 1x DN300 1x DN125 1x DN50 (lateral)
-: 1x DN50 (bottom)
Height: 1600 mm (container)
Height: 2100 mm (total)
Diameter: 830 mm (inside)
Diameter: 900 mm (outside)
Width: 1100 mm (total)
Material:...
Company and Process data.
Input fraction Windshifter 0-500mm
Suitable for bandwidth 1000mm (komejo)
Material to be blown out : paper , cardboard , plastics, wood (the lighter fractions)
Nozzle width 1x 1050 mm. The angle is adjustable by means of a top rod.
1x Fan 5.5kW (Incl. air cleaning unit)
Equipped with air tank + Asco valve 24V.
Cctbpt9
1x Separeer roller , mechanically adjustable Horizontally and Vertically by means of racks,
The lighter materials are blown over the separation drum. The ...
Magnetic drum separator for steel slag.
Belt 2000mm wide, we manufacture various sizes.
Hsni287
- Material sieve in 2 or 3 fractions (one or two screening grids)
- Links with hole diameter according to your choice
- Yield from 10 t / h to 15 t / h (depending on the material)
- Loading hopper with 2m³ capacity measures 260 cm x 180 cm
- Equipped with a professional electro-vibrator, it allows continuous operation.
- Precise and fast screening
- Adjustable vibration power by moving the rotating masses of the vibrator
- Very low maintenance costs
- inclination according to your needs
- Grid d...
ASL skid mounted oil separation plant (2015) comprising:
Yshpwg
2 - Hiller DA45-363 SB oil/water/solids separators complete with all process tanks, pumps & controls
Useful width 1,000 mm
Bdqznshw
Belt gear motor power 2,20 kW
Polar wheel power 4 kW
Overall length 2,900 mm
NIR sorting unit for the separation of various type of plastics, paper, wood etc.
Obq3j
new machine for a special price
ready for dispatch
Suspended permanent neodymium magnet for removing ferromagnetic fractions from waste stream.
Magnet type — permanent magnet
L20hi9k
Magnetic zone width — 1000/1200 mm
Magnet range — up to 350 mm
Energy consumption — up to 3 kWt
Discharge — automatic
Dimensions (L/W/H) — 1915/1705/470 mm
Unit weight — 1400 kg
Friction Washer, Wipa 500/2500, rotor length 2500, perforated screen basket (3mm) diameter 500mm, motor 22kw 4 water injection points. New, sold after project cancellation. High speed friction washer, made to remove huge quantities of non desirable material (dust, fines, dirt) from plastic regrind while dewatering in the top part of the rotor, allow to remove huge amount of water.
Designed for cleaning under water and drying plastic regrind, especially film flakes, PET- bottles flakes and other...
To separate and sort after the specific weight from light and heavy fraction.
Gur3mrb
Useable for grain, aluminium/plastic, rubber/textile, cable-recycling, etc.
Type and size are selectable, depending on the product and throughput.
At constant machine length, it is possible to choose between working width from:
450mm, 600mm, 900mm.
Doppstadt Ballistic separator STT2000
Year: 2005
Worked hours: 600
Power: 4 kW with electric motor
Biz93j7i0j
Dimensions: 5500x2410x1740 mm
Ballistic separator
Power 4 kW
Brake motor
2j0fg0eb
Width 2400 mm
Length 5,500 mm
Screening area 8.40 m² (8.40 m²)
6 screening pallets, square mesh 60 mm
Local control box
eddy current separator,
several sizes can be supplied, up to 2000 mm wide
Ysqypc
Averman screener for sale. Was taken off working.
Ysrhng
Used Electric motor wrecker. Machine is in very good condition.
Bilnyh23wh
To sieve dry material: like flour-, grainy-, and granule-shaped material.
U3el9pcmu
Sizes from: wide 500-1500mm / length 1200-2400mm
Sieve layers: 2 - 4 layers, granulation 0,1-18mm freely selectable.
From bio gas plant.
Separator with screw conveyors
Bh8qclhqoe
overbelt magnet ferrous separator
Guplx0aw3
magnet dimensions 1040 x 530 x 256 mm
overall dimensions 2190 x 1214 x 635 mm
total weight approx. 1020 kg
motor 1,5 kW
ALSO OTHER DIMENSIONS CAN BE DELIVERED
The wind sifter was purchased by us directly from the manufacturer in 2007. Original order confirmation with equipment is available. Purchase price approx. 95.000 € net. The plant was in operation for approx. 7 years (2008-2015). Since 2015 the wind sifter is stored dismantled on our premises. The plant was dismantled fully functional. After the longer storage, a revision for commissioning is necessary. With a clearly arranged investment, a top wind sifter can be set up.
Details and further i...
New plastic washing machine (PE, PE, Hard plastics, ). CHAIN TUBE TECHNOLOGY.
IN STOCK
Sink-float separation tank.
Capacity - 2t/h
Depth - 2 m
Width - 2 m
Lenght - 6 m
Volume - 11m3
Shaft with shoulders for transferring – 6 pcs.
Shaft with comb for output – 1 pcs.
Chain-tube conveyor for output sinking material, capacity 1000 kg/h, lenght 4000 mm, 1 pcs.
Shaftless screw conveyor for output of sinking material D270, trough D320x4 mm, capacity 1000 kg/h, lenght 4000 mm, 1 pcs.
Made of stainless ...
Throughput: 300 - 350kg/h depends on sorting and kind of cables
Pre shredded cables up to 200 - 400kg/h
Connected load: 33 kW
Measurement: l x w x h ca. 4,0 m x 1,6 m = 6,4 m2
Input: Cable lengths up to max. 0,8m
Diameter up to ca. 40mm
Single wire up to ca. 10mm2
2pshmm
Polyfloat® plastic separation
Manufacturer: SICON GmbH, Leiblein GmbH, etc.
Type: Polyfloat®
Required Space: ca. 75m²
Throughput: 500 – 1.500 kg/h
Separation principle: Density based Swim-Sink-Separation
Possible Densities: 0,9 - 1,3 g/cm³
Inputmaterial: Plastics, ideal ᐸ 15 mm
Prior Use: PVC-Separation from ASR-Plastics
Condition: pre-owned, dismantled, stored, new painting necessary
Age: 6 / 8 years
Operational Time: ca. 2.000 hours
Power: 400 V, 50 Hz, 188 kW
Components: 1 Washing centrifug...