Used Ksm 2600 for sale (1,473)

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1720x760x1160 mm Weight 230 kg Giedpsvz Hnrsfx Admjl Total power requirement 3,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1720x950x1260 mm Weight 250 kg Total power requirement 3,5 kw Giedpfxjvz Hkgj Admel

Condition: new, Year of construction: 2022, Belt width: 150mm Gisdpfx Adjiuld Domel Belt length: 2600mm Oscillation: yes Sanding rollers for curves: 1 Sanding unit can be swivelled: yes Table size: 750mm x 290mm Suction connection: 120mm Motor power: 3kW Machine length: 1700mm Machine width: 700mm weight: 180kg

Condition: excellent (used), Year of construction: 2015, For sale is a fully functional and very well-maintained gas burner from the brand WEISHAUPT WM-G20 (2600 kW), complete with DUNGS DN65 gas train. WEISHAUPT WM-G20 (2600 kW) - Output: 350–2600 kW - Version: ZM - Year of manufacture: 2015 - Delivery available upon request - All technical data can be seen in the pictures Godpfx Ajign Izedmoil Preferred sale to dealers, commercial traders, or for export. All information provided without guarantee; subject to errors and prior sale. The seller assumes no liability for typographical or data transmission errors.

Condition: good (used), Year of construction: 2017, BCS Autobox 2600 + Multicut 3 Year 2017, Max. sheet width: 2600 mm Auto set slotting tools Auto set creasing tools Auto set. Tool less size change Feeder with capacity 300 mm height of blanks Typical set-time of 1 minute High speed up to 100m/min Over 50 Fefco box styles possible Handles singe to double wall corrugated board (max. 10 mm) Godpfxer Nx Uns Admsil Touch Screen Control panel for easy programming of new or stored box size and styles

Condition: used, functionality: fully functional, Year of construction: 2007, Plate bending machine: Birlik KSM 1280X1 plate bending machine type: KSM year of manufacture: 2007 bending length: 1300 bending capacity: 1mm roller diameter: 2x90mm, 1x50mm cone bending equipment mains voltage: 400v 50Hz 0.75kw foot pedal operation. Gijdpfx Aow Ty Duodmel Currently, a gear motor with a higher speed than the standard is installed. machine length: 1900mm machine width: 550mm height: 1300mm weight: 300 kg high-strength rollers according to SAE 1050 certificate

Condition: ready for operation (used), Year of construction: 2006, This FISCHER & RÜCKLE Monguzzi AFD 35 / 2600 veneer guillotine was manufactured in 2006. It features a max cutting length of 2600 mm and widths from 45 to 350 mm. Equipped with a solid, heavy-duty build and a quality hydraulic system, it ensures high productivity and precise cuts. Ideal for preparing veneer strips for splicing. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Max. Cutting length: 2600 mm • Cutting widths: 45 - 350 mm • Pressure beam opening: 100 mm • Pressure beam width: 350 mm • Parallel fence with digital read-out: 25 - 1000 mm • Cutting angle approx. : 45° • Movable laser lines: for optimizing veneer yield. The manually operated laser line for the position of the front blade is quickly set. The veneer width is transferred to the computer at the push of a button, and the cutting process starts automatically. Extra Information Features: Solid, heavy duty built with generously-dimensioned pressure beam and cutting table to absorb the high clamping and shearing forces. Unique system with fixed, solid cutting table and movable pressure beam. Laser lights for exact visual identification of cutting lines. Quality hydraulic system with large oil tank. Electric-motor-driven parallel stop with rapid adjustment. Industrial computer based on Windows operating system, wide screen and keyboard. Various modes of operation and storable program operations. Extensive collection of production data. Gjdox Nrmbjpfx Admeil Central lubrication unit.

Condition: good (used), functionality: fully functional, total width: 520 mm, total height: 1,135 mm, total length: 700 mm, working width: 5 mm, input voltage: 400 V, type of input current: three-phase, overall weight: 49 kg, power: 1 kW (1.36 HP), Knoedel cutting machine Sama Mobile base frame with container Connection 400V, 16A-CEE plug Used machine Delivery service Gsdpfx Adet Ezi Uemjil Many more bakery machines in stock!

Condition: good (used), Clamping plate with T-slots, plate field, welding table, welding table, plate boring machine, T-slot plate, Gsdpfx Asndzx Usdmjil -T-slot plate: clamping plate with support ribs and table extension on both sides -Clamping area: total 6000 x 2600 mm -Height: 295 mm -Table extension: 300 mm on both sides -Groove width: 30 mm -Groove spacing: 500 mm -Transport dimensions: widening dismantled on one side 6000/2300/H590 mm -Weight: 10000 kg

Condition: good (used), functionality: fully functional, 1 fixed upper front blade Giedpfx Adow D Nqgomsl 1 movable lower rear blade opening: 4500 mm rear stop, lasers

Condition: ready for operation (used), Year of construction: 2007, The Marel Townsend 2600 peeler removes casings without damaging the sausages and is ideal for small and medium-sized meat processing operations. The device is suitable for both standard and cocktail sausages. Dimensions: Gedpfjwg H Hdjx Admjil 13 mm to 36 mm diameter Steam operated – you will need steam for the machine to work.

Year of construction: 2004, condition: good (used), Built in: 2004 Cutting width: max 2.600 mm Feeding height: 160 mm rear table length: 2.600 mm Front table length: 725 mm table height: 900-925 mm side table size: 750x570 mm Godpfxepfb Rtj Admjil machine depth: 4.180 mm Machine width: 4.400 mm Machine height: 1.720 mm continuous knife cycle rate: 40 hydraulic pressure: 1,5-65 kN minimum cut without false clamp: 40 mm Speed: 17,8 kW Weight: 8.900 kg Equipment • chromed air table • side table right with air • side table left with air • digital program • program with color- display • 2 knives

Condition: new, Year of construction: 2025, CIDAN F folding machine is fast, user-friendly and reliable. The new construction is robust with welded sides, extra strong lower beam and clamping beam. The generous 150 mm opening height and the generous beam openings allow greater flexibility. The folding beam comes in three different widths, offering the best result for any profile and material, with keyholes for fast changes. The strong but compact folding beam makes the operator’s work easy and the entire process is speeded up as the clamping beam opens before the folding beam is back in place. Choose a CIDAN F folding machine and you choose work of joy and productivity in a perfect combination. Gedpfxom Tv D Us Admjil - Fast, user-friendly and reliable. - Adjustable crowning for perfect folding results regardless of length and material thickness. - Two folding beam rails as standard, 7/10 mm and 15 mm. - 8–16 gauging rails depending on back gauge type and working length. Click here to read more about our back gauges. - Choose between three different control systems: EasyLink, nuLINK or ProLink W.

Condition: good (used), functionality: fully functional, total length: 2,000 mm, total width: 850 mm, total height: 1,400 mm, Stripper/Casing remover is used to remove casings without damaging sausages Brand Townsend Model 2600 Dimensions 2000x850x1400mm Gjdpfxov Aadvs Admoil

Condition: used, Year of construction: 2006, functionality: fully functional, For sale Veneer 2-knife cutting guillotine CUTMASTER Monguzzi 2600! Gsdpfx Adjumlinjmjil Tech. data Cutting length 2.600 mm Length of cross-cut 1.477 mm Cutting height 100 mm Strip width min 20 mm Rip fence Yes Pressure beam pneumatic Blade drive pneumatic Weight 3.800 kg CE marking Total connection 10 kW

Year of construction: 2016, condition: like new (used), functionality: fully functional, machine/vehicle number: GoTx1900/2600FX, The GoTx® 192FX/190FX/260FX are powerful fixation units for pigment inks. Designed to run with the GoTx® 2190/2260 printers for seamless productivity. Utilising quad zone heater element plates below and above the media horizontally where the fabric is not touched during cure. For consistency we do not employ IR heatlamps to avoid cool cure zones across the media. Fixation on a horizontal path provides better control and avoids smoke, steam or oil which can be dragged across the media = ghost free imaging. Gedpfx Ajv Dcc Rodmoil Up to 60 linear meters per hour output, with variable top, bottom radial axial fans for steam removal The GoTx® fixation modules are designed for uninterrupted production and media is NOT touched during transfer fixation process.

Condition: new, Year of construction: 2025, CIDAN FS folding machines are phenomenal combinations of raw strength and flexibility. With powerful motors that fold with fantastic precision and to exact measurements this machine can do a lot more than just bend. Together with the ProLink W or nuLINK control system and frequency control of the machine’s movements you have everything you need for contract manufacturing with high quality and productivity. CIDAN FS folding machines are true workhorsees with a whole lot of benefits. - Crowning adjustment as standard always gives the perfect folding result - Two folding beam rails with width 7/10 mm (0.275″/0.394″) and 20 mm (0.787″) as standard - Fast, reliable, and user-friendly - Choose between three control systems, EasyLink, nuLINK or ProLink W, all with plenty of features Giodpfxem Tv Hzo Admel - Multiple backgauge stops for both small and large parts across the bending length of the machine (Click here to read more about our back gauges.)

Condition: used, functionality: fully functional, Machines connected in one line (all four machines are only sold together): 1. Veneer 2-knife cutting guillotine CUTMASTER Monguzzi 2600 2. Glue application machine GLUEMASTER, year 2006 3. Roller conveyor MONGUZZI R2500, year 2009 4. Veneer fanning machine Fisher+Rueckle FANNINGMASTER AP515, year 2009 Tech. data Veneer 2-knife cutting guillotine CUTMASTER Monguzzi 2600 Cutting length 2.600 mm Length of cross-cut 1.477 mm Cutting height 100 mm Strip width min 20 mm Rip fence Yes Pressure beam pneumatic Blade drive pneumatic Weight 3.800 kg CE marking Total connection 10 kW Gijdpfx Ajt A Nr Ssdmjl

Condition: refurbished (used), Year of construction: 2017, machine/vehicle number: R-00550, load capacity: 12 kg, arm reach: 1,850 mm, controller manufacturer: IRC5, teach pendant manufacturer: DSQC679, Refurbished ABB 2600-12/1.85 manufactured in 2017.03. The robot comes with an IRC5 controller including Flexpendant DSQC679. Gjdpfex Tiamjx Admoil   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The oil is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: ABB Model: 2600-12/1.85 Model Number: IRB Year of Manufacture Robot: 2017.03 Warranty term (months): 12   Payload (kg): 12 Reach (mm): 1850 Repeatability (mm): ± 0.04 Controlled Axes: 6-axis Installation Type: Floor, Upside-down Mount Weight (kg): 284   Controller: IRC5 Year of Manufacture Cabinet: 2017.03 RCC Length (m): 14   Teach Pendant: DSQC679 Teach Pendant Cable Length (m): 15

Condition: used, Year of construction: 2011, total width: 2,400 mm, total length: 4,500 mm, total height: 2,200 mm, Empty weight: 3.000 kg Price: On request Including various accessories, replacement parts and spare parts - Year: 2011 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 289.112 Gijdpfxsxrz Hms Admjl - Control type: Beckhoff - Control: CNC - Travel X: 3000mm - Travel Y: 1500mm - Resonator type: Hypertherm Powermax 105 - Max. sheet thickness: 32mm - Power: 16.8kW - Transport dimensions: 4500mm x 2400mm x 2200mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2014, 780mm Swing, 630mm Swing over the Cross-Slide, 481mm Max Cutting Diameter, Giedpfox Eluwjx Admsl 790mm max cutting length, 12 Station Turret, 76mm bar capacity, 3500rpm, 22kW Spindle, Fanuc Oi, Tool setter, 10” 3 jaw chuck, Low Volt Light, Tailstock, Swarf Conveyor, Coolant.

Condition: excellent (used), Year of construction: 2005, Brand: Eurotec Dimensions LxWxH (mm) Outside: 600 x 400 x 120 / Inside: 570 x 370 x 100 Weight (kg) approx. 1.86 each Gjdpfx Adsicz A Ajmoil Number of units in stock: 2,600 Made in Germany Comments: Used but good condition, ex-freeze usage

Condition: ready for operation (used), Year of construction: 2009, Immediately available from site: CNC bed milling machine Iberimex Model Ecomill BF 2600 Year of manufacture 2009, low operating hours Heidenhain iTNC 530 control Table 2700 x 1050 mm Travel X/Y/Z: 2600/1000/950 mm Table load capacity: 6 t Internal coolant supply: 14 bar Gisdpfsx Tqz Eox Admjl Hydraulic milling tool clamping SK 50 taper Spindle speeds: 24 – 1600 rpm Spindle drive: 25 kW Chip conveyor Weight: 14 t Offered at €24,000 plus VAT, ex-site.

Condition: excellent (used), Year of construction: 2014, 1000mm Swing, 760mm max. machining diameter, 1540mm max turning length, 4000rpm main spindle, 76mm bar capacity, 12000rpm milling 18.5kW, C axis 0.001 degrees, Y axis -/+115mm, Giedpfxsw Azz Uj Admel 40 station ATC, 22kW spindle motors, FANUC 31i control, 3 Jaw Power Chuck, Swarf Conveyor, Coolant

Condition: excellent (used), Year of construction: 2014, 1000mm Swing, 760mm max. machining diameter, Godpfxsw I Tnij Admjil 1540mm max turning length, 4000rpm main spindle, 76mm bar capacity, 12000rpm milling 18.5kW, C axis 0.001 degrees, Y axis -/+115mm, 40 station ATC, 12 station lower turret, milling speed 4,000rpm, 22kW spindle motors, FANUC 31i control, 3 Jaw Power Chuck, Swarf Conveyor, Coolant