Consisting of bale opener for big bales type MHB
and straw shredder type MHZ
1) Bale opener MHB:
Production time approx. 17 weeks
List price: 19.995 € net
Suitable for round or square bales.
Inclusive FU (frequency converter) - this controls the speed of the scraper floor
The bales are placed on the scraper floor and the feed of the tiller is switched on. The tines of the tiller tear the straw from the bale and throw it into the hopper. Ideally, the combination of bale breaker and straw ...
Short name: HSZ 1600-6WV
Electric drive: 315 kW
Cca003xjyk
fine shredding basket
vibrating conveyor: HAAS HVSR 1580 x 4000
double conveyor screw / auger: HAAS HDFS 500 / 500 x 6890
hydraulic power pack
electrical cabinet
substructure
etc.
See also the manufacturer's brochure:
For the production of material for: chipboard industry, pellet and briquette industry, biomass power plants, alternative fuels, animal litter.
For crushing of:
WASTE WOOD · GREEN CUTTING · CLASSIFYING LARGE MATERIAL, BIO...
RSS HD Rasper 1200 series, rotor length 1200 mm
132kW
sieve size in consultation.
Ci0zzybgan
weight approx. 7000 kg
supply and discharge conveyers with for example, magnetic separation possible. as well as storage options
suitable for tire shreds, cables, etc.
Delivery in consultation.
Secondary shredder with feed hopper with screw discharge
Rotor 1000 mm diameter x 700 mm wide
Rfznd
10 rotor knives, 2 stator knives
Motor 110 kW (other motor size available on request)
Sacria Orwak 2040 AT Auto Baler in good condition. Suitable for baling many different materials. This machine has spent its life indoors and is in great condition and working order. will go straight to work.
Bnmyrqk0
Special price for our prefeeding machine
approx. 15 operating hours.
Included:
+ double row of knives (24 instead of 12 knives)
+ profile rotor for increased throughput
Igkchryd0
Option:
veneer and paper stripper + 940 € net.
* recommended for extremely thin materials with thickness smaller than 3 mm
Our mütek single-shaft shredder MRZ 530 shreds a wide variety of materials such as all kinds of waste wood, softwood, chipboard and hardboard, pallets, construction timber, demolition wood, carpet, ...
For sheeting, tiles, etc.
With horizontal infeed
Working width 1050 mm, max. infeed height 50 mm
Open rotor 600 mm diameter with 4 knives
2 stator knives
Erwz9w37
Main motor 75 kW
Hook lift jaw crusher SEBA HL 70-40
Machine quickly ready for use, easy to operate, everything remote controlled.
B092cpv8
Easy to transport, maximum productivity, from transport to working position in 5 minutes.
Weight: Kg.11900
Transport length: 5700 mm
Working length: 8600 mm
width: 2250 mm
Height: 2260 mm
Doosan diesel engine: 54 kW
Belt speed: 1,85 m / sec
Feed hopper capacity: 2,5 cbm
capacity per hour: 10-45 cbm
crusher opening: 700 × 400 mm
crusher gap adjustment hydr.: 20-100 mm
Vibra...
Gravel plant for the production of washed crushed sand and chippings:
- 2 feeding bunkers
- Conveyors and dosing belts
- Maggautox crusher
- Washing screen and dewatering screen
- Bucket wheel
- Power unit complete
Itkcit2
The shredder breaks large bulky pieces of polystyrene and EPS and similar materials with a maximum rod density of 30kg/m³ into small pieces. The shredder reduces the volume by about 65%.
Thus, machine is ideally suited for use in industrial and craft enterprises, as well as for wholesale and retail trade with packaging material made of Styrofoam.
Throughput capacity:
Sieve 10 mm: approx. 3 m³/h
sieve 20 mm: approx. 8 m³/h
Sieve 30 mm: approx. 13 m³/h
Sieve 40 mm: approx. 18 m³/h
Sieve 50 mm: app...
Caterpillar mobile jaw crusher SEBA LT 50-30
Technical data:
Jaw crusher: 500 x 300 mm
length: 4255 mm
width: 1650 mm
height: 1890 mm
Weight: 4000 kg
Doosan diesel 44 Kw
Speed: 1.1 Km/h
Max. Gradient: 30%.
O3iod
Feeding belt: 0 - 0.3 m/sec adjustable
Discharge belt: 0.75 m/sec
Hopper: 0.6 m³
Throughput: 6-30 m³
Crusher gap hydr. adjustable from 20-80 mm via remote control
Incl. remote control
Sandvik QJ241 jaw crusher, former Extec C10
2014 year
3400 working hours on crusher
4200 working hours on CAT C7.1 engine
878ejp
Inlet 1000x650 mm
Engine CAT C7.1 no DPF, no ADBlue
CSS range from 0-50 to 0-100 mm
Capacity 80-150 tons per hour depend on material
Weight 34 tons
Fitted with overband magnet
Fitted with prescreen with side conveyor
Machine in very good working condition
- Motor power 15kW
- Control SPS supported, with two-hand safety circuit
- cutting force 50to
- idle speed ca.22,3 mm/sec
- Splitting table straight design
- cutting channel:
- max. length ca.3000mm
- max. opening ca.1250mm
- machine weight ca.4,8to
goods to order
Dvh9wpb
price and further information on request
Crawler Mobile Jaw Crusher LITE TRACK 70-40 New Evolution
Quick to use machine, easy to operate, all remote controlled. Easy to transport, maximum productivity, from transport to working position in 5 minutes.
Weight: Kg.12000
Transport length: 5300 mm
Working length: 8630 mm
width: 2420 mm
Height: 2750 mm
Doosan diesel engine: 54 kW
Driving speed: 0,7-1,3 Km / h
Maximum gradient: 30%.
Belt speed: 1,85 m / sec
Feed hopper capacity: 2,5 cbm
Bsz8i3vaiu
Vibrating chute with pre-screen
Capacity pe...
For splitting and shredding of wound paper, cardboard or
plastic rolls on core.
- Motor power 7,5kW / 32 amp/ 5-pole - 50HZ-3LNPE
- Control PLC supported, with two-hand safety circuit
- cutting force 30to
- cutting speed 17,3mm/sec
Cutting channel designed for:
- max. roll length 1500mm
- max. roll diameter 1200mm
- machine weight approx. 3000kg
Bpbfatja09
-color RAL5012 - light blue
further information and price on request
Order goods
- Motor power 15 kW / double pump
- control SPS supported, with two-hand safety circuit
- cutting force 50to
- idle speed ca.22,3 mm/sec
- Splitting table straight design
- cutting channel:
- max. length ca.3000mm
- max. opening ca.850mm
- machine weight ca.4,5to
goods to order
Bewwen9g2s
price and further information on request
- Engine power 9kW
- Control SPS supported, two-hand safety circuit
- cutting force 35to
- Splitting table straight design
- cutting channel:
- max. knife length L= 2000mm
- max. opening H= 1200mm
- machine weight approx. 4to
-coloring RAL 5012 - light blue
D2h9jg7
- hand guard in the area of the control panel and opposite to it
- Forklift entry shoes incl. (serves for easy transport of the machine by forklift)
Ordered product
Price and further information on request
Engine power 7,5kW
- Cutting force 30to
Cutting channel designed for
- max. roll length 1500mm
- max. roll diameter 850mm
- machine weight approx. 3500kg
- tank capacity approx.110liter
- hand guard in the area of the control panel and opposite to it
-splitter table straight execution
-documentation 2-fold German ( 1x text form, 1x CD )
-color RAL 5012 - light blue
protective grid/knife bar RAL 1028 melon yellow
Ordered product
Bssjtq2ihv
Price and further information on request
- Engine power 9kW
- Control SPS supported, two-hand safety circuit
- cutting force 35to
- Splitting table straight design
- cutting channel:
- max. knife length L= 2000mm
- max. opening H= 1200mm
Bednmofn0d
- machine weight approx. 4to
- hand guard in the area of the control panel and opposite to it
- Forklift entry shoes incl. (serves for easy transport of the machine by forklift)
Ordered product
Price and further information on request
- Motor power 15kW
- Control SPS supported, two-hand safety circuit
- cutting force 50to
- Splitting table straight design
- cutting channel:
- max. knife length L= 3000mm
- max. opening H= 1250mm
- machine weight approx. 4,8to
- hand guard in the area of the control panel and opposite to it
- forklift entry shoes incl. (serves for easy transport of the machine by forklift)
Yrzsf8
-colouring according to customer's request
goods to order
Price and further information on request
Hazemag Impact Crusher AP 4
Hlbe37uu
with complete Driving, Spare Rotor + Spare parts.
Capacity : appr. 150 T/h.
Power : 35 to 120 kW.
Opening : 700 x 1000 mm.
Weight : appr. 11000 kg
Special offer now € 15.000,-
SBM Austria Percussion Mill
Type 8/5/3-SE
Feed Opening : 390 x 465 mm
Ci9vey7xjv
Driving: 75 kW E-Motor
Incl.: Steel Construction, Input/Discharge Funnel electrical Unit.
We make the search easier for you
You will receive new offers immediately and free of charge via e-mail
You can easily terminate the search request at any time
Morlock Motors official partner of Machineseeker and Truckscout24
Photo gallery: the 10 strongest forklift trucks in the world
10 valuable tricks for buying used machines online
How to receive 100% of our e-mails
Sample sales contract for used machines in nine languages
Olympic Games: Machineseeker sponsors Team Germany
Machineseeker Trust Seal
What is the Trust Seal?
The Machineseeker Trust Seal enables buyers to quickly recognize whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Verification of the dealer's postal address
Validation of the banking details
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal awarded to you in your listings on Machineseeker. In this way, you signal to any potential buyer the independently verified seriousness of your company. This creates buyer confidence and increases the likelihood of successfully selling machines. In addition, you have the option of including the Maschinensucher seal of confidence on your homepage and letterhead.