Comafer 140N waste wood briquetting press, complete with 4hp fan and filtration unit.
Throughput 110kg/hr - 70mm diameter briquettes
B27welb98s
Configured to produce approx. 300mm long briquettes (HotLogs) from clean waste wood.
Part of a containerised shredding and briquetting system. Comes with blown extraction system (5.5hp fan), and McClukie dust filtration unit.
May sell separately and open to offers
15
Technical data briquetting press :
Manufacturer Höcker Polytechnik GmbH, Germany
Type BrikStar CS 4-15/09-L and CS 4-15/09-R (discharge briquettes left or right)
Year of construction 02/2019
Operating hours 10 hours
B3fcb22vgg
Number of pressed briquettes 1.587 pieces
Briquette cross-section 65 mm
Drive power hydraulic pump 4 kW
Drive power agitator 0.37 kW
Drive power of dosing screw 0.75 kW
Electrical connected load 5.4 kW
Rated current 8.5 A
Materials that can be briquetted are, for example, ...
6
Holzspäne
Diameter of the briquets 50 mm
10:1
Nwxkp
Motor output 18 PS
Weight 1,6 t
13
Briquetting press NEM 900:
Listprice: 69.995 € net
*options on surcharge
for briquetting aluminum chips
Throughput: up to maximum 360 kg / h
* more details after a free test with heard material
.
Briquette diameter: Ø 70 mm
Optimal briquette length: 70 mm
.
Technical specifications:
Total connection: approx. 31 kW
In continuous operation approx. 22 kW
400 volts / 50 Hz / 3 phases
Pump: 120 + 60 liters per minute
Silo: 1 m³
Silo rollers: 1200 mm
Including agitator
Oil tank: 600 liters
Dimensions...
2
Swarf System
SB1000 & SF300
Press for briquettes
Fuw0sdgp8
2
The AMIS briquetting press type ZBP 30 produces 30 mm briquettes. These briquettes can be ideally used for combustion in wood gasifiers and in smaller wood chip boilers / heating systems. Any material from a wood processing plant (chips, dust etc.) can be briquetted.
Wood chips, sawdust, sawdust etc. accumulate in all craft and industrial enterprises of the wood-processing industry. Enormous storage and transport costs are claimed for this on a daily basis. Briquetting presses offer an ideal sol...
10
Briquette diameter: 75 mm
By0wnmx87p
Capacity: 900 - 1200 kg/h
Electric motor: 55 kW
5
Bronnebeg Comprima Briquetting Press was originaly developed for briquettting saw dust and wood chips but appeared also qualified for briquetting alum turnings.
Ft02fn2
Briquette size: 200 x 120 x var.mm.
production: 400-450 briquets per hour.
6
Price is starting from: the iSwarf 440 and 550 briquetting presses offer the ideal solution when it comes to processing short, loose metal chips left over from machining non-ferrous metals, steel and cast iron parts or other metals such as aluminum and magnesium. Depending on the base material, the capacity is from 135 to 500 kg / hour in aluminum. Price is from and depends on the desired configuration, capacity and briquette density (residual moisture content). Delivery after consultation. Pric...
3
Very robust, powerful briquetting press
- from our demonstration room
Special price net: 28.700 €
*extremely high pressing pressure up to 300 bar, for highly compressed briquettes
*including oil cooler, suitable for continuous operation
technical data:
- Throughput up to (kg/h)
*always depending on the bulk weight
*Aluminium : approx. 60
*steel & cast iron : approx. 100
*Gel casting, bronze, copper : approx. 100
- Power : 4.4 [kW]
- Max. specific pressure : 3700 [kg/cm2]
- briquette sizes : 60...
2
Available 8-10 weeks after receipt of Payment
Warranty 12 months after delivery
Bzooksl9b0
Small to medium quantities of wood chips that are produced as a waste product of a variety of different materials in processing industries (especially wood, biomass, etc.) are ideal for pressing into a small format “Briklet” with the RUF Briklet. Its small 30mm (on average) briklet format provides an attractive alternative. These “briklets” can be fed automatically into industrial furnaces, unlike our con...
6
For the industrial production of rectangular briquettes
The ZBP 500 briquettes pressable materials into highly compressed briquettes. The briquettes can be easily stored and transported due to their stackability. In the pressing chamber of the hydraulic pressing unit the briquettes are formed by means of a pressure cylinder. Thus, up to nine briquettes per minute can be produced with a pressing force of 1,000 -1700 kg/cm².
Standard equipment:
Nafkr8gn
Safety limit switch for oil temperature, l...
1
Briquetting presses for steel slags and metals. Capacity 5000kg/hour.
We manufacture these presses in range 3000-10000kg/hour
Ba0lmmcu
11
Complete plant for the production of briquettes (type RUF):
1. Shredder WEIMA WLK1500, 90kW, 17 operating hours
2. Discharge belt with magnetic roller and over belt magnet
3. Intermediate bunker 30m3
4. Hammermill FRIEDLI Sigma6.2H, 45kW
5. Extraction system: fan, cyclone, rotary valve, spark detection
6. Briquette press WEIMA TH1500 Vario Plus, 37kW, 350 operating hours
7. Control panel with PLC
E0dqikh9m
8. Packing machine (manual)
Briquetting press for metallic dust
was only tried on a trial basis
hardly run
Bgxnmgzmzq
1 hour of operation
9
Hydraulic briquetting press for rectangular briquettes
Type R - throughput up to maximum 500 kg / h * depending on the specific weight of material. Based on a bulk weight of 220 kg / m³.
+ 24h operation possible
+ Longevity
+ Low maintenance costs
+ Compact structure
+ High energy efficiency thanks to innovative hydraulics
+ 25 years of experience
.
* depending on the bulk weight of your raw material
* based on a bulk weight of 200 kg per cubic meter
Detailed information after a successful test...
4
EPS Compactor C200 by Bartontech Poland
New machine, produced by us!
Price: 29 000 euro’s (net price)
Press polystyrene EPS-C200 compacts EPS waste at a ratio of 50: 1. Ironing polystyrene by using offered compactors EPS reduces the cost and the space occupied by the EPS waste. EPS presses are very easy to use and safe, can be operated by one person. In addition, the compression of waste polystyrene foam and its re-use can help us to care about the environment.
Technical details:
- Power con...
8
The briquetting press ZBP 40 was developed especially for small and medium-sized companies and convinces by a sensational price/performance ratio.
The design is compact and handy. With a width of less than one meter, the press fits through almost any door.
The briquetting press is suitable for the briquetting of wood shavings, sawdust, wood dust, wood chips, paper and polystyrene.
Ebnl792se
Further features of the ZBP 40
Optionally available hopper attachment for manual feeding (can also be de...
8
Completely overhauled HSB 15 incl. certified oil sump and protective fence for a fast and
Br29svyd2z
problem-free commissioning.
Overhauled 2021
Optional new 8m³ hopper and screw conveyor available.
Incl. used machine warranty
Lanner briquetting press LB100-065M consists of:
ᐳChip crusher
ᐳMucki - loading mechanism
ᐳPress
Bhspqcow9x
ᐳControl cabinet
Briquette size - 65mm diameter
Throughput - 40-330 kg/h
2
Also different models avaliable !
1. Briquette Diameter: Ø 120mm
2. Capacity : 1800 – 2200 kg / hour (Iron & Steel)
3. Preliminary Compression Ram Thrust: 15 tons
4. Main Compression Cylinder Thrust: 400 tons
5. Maximum Working Pressure: 300 bars
6. Cycle Time : 12 - 14 sec
7. Electric Motor Power: 75 kW
8. Machine Dimensions (Width x Length x Height): 3200mm x 4200mm x 3500mm
9. Machine Weight: 13.000 kg
10. Screw drive feeders will fill the compression chamber automatically and built-in vib...
15
To be sold at a special price
List price: € 48,500 net
Our best-selling briquetting press series
+ Tried and tested, simple technology for extremely low susceptibility to errors
+ 25 years of experience, further development and know-how
+ Several hundred machines in use with satisfied customers
+ Good price performance ratio
Briquetting press NEM 300
* Including oil cooler.
Throughput approx. Up to 200 kg per hour * strongly dependent on the material.
- in the last test with aluminum granule...
3
In this auction we would like to offer you
EPS Compactor Mil-tek, model 1800
Net price: 10500 euros
The machine is used, but in very good condition, ready to work. It has also the air compressor.
Technical details:
Power supply: 3-phase - 400 V / 16 A
Pneumatic supply: 6 - 8 bar
Noice level: < 70 dB (A)
Motor: 2 x 3 kW
Height: 2400 mm
Width: 3960 mm
Depth: 1120 mm
Weight: 860 kg
EPS-block: 270 x 270 mm
Block density: < 300 grammes / litre (< 300 kg / m3)
Capacity: < 70 kg / h
Certificates: ...
12
AT A GLANCE:
Variable container dimensions (on customer request)
Left- or right-hand version
Hydraulics with separate oil tank
All series can also be equipped as "DUO" variants
Wood chips, sawdust, sawdust etc. accumulate in all craft and industrial enterprises of the wood processing industry. Every day enormous storage and transport costs are claimed for this. Briquetting presses offer an ideal solution for this, as briquettes, on the other hand, are easy and space-saving to stor...
1
Also different models avaliable !
1. Briquette Diameter: Ø 80mm
2. Capacity : 700-900 kg/hour ( Copper )
3. Preliminary Compression Ram Thrust: 12.5 tons
4. Main Compression Cylinder Thrust: 250 tons ( 5 tonne / cm2 )
5. Maximum Working Pressure: 300 bars
6. Cycle Time : 12 - 14 sec
7. Electric Motor Power: 30 kW
8. Machine Dimensions (Width x Length x Height): 2200 mm x 2600 mm x 2800 mm
9. Machine Weight: 6.000 kg
10. Screw drive feeders will fill the compression chamber automatically a...
2
Consisting of press and suction
1) Briquetting press:
Your advantages:
+ very robust, simple technology
+ Top price-performance ratio
+ Suitable for continuous operation
+ Long-standing, well-functioning / established machine
Including control cabinet with timer operation
Press is switched on manually and then runs until the time set on the timer (e.g. 4 hours) has elapsed. Then the press switches off.
Technical data:
Briquette dimensions: approx. 35 x 35 mm (square),
briquette length: 5-40 mm *...
4
EPS Compactor C50
Press polystyrene EPS-C50 compacts EPS waste at a ratio of 40: 1. Ironing polystyrene by using offered compactors EPS reduces the cost and the space occupied by the EPS waste. EPS presses are very easy to use and safe, can be operated by one person. In addition, the compression of waste polystyrene foam and its re-use can help us to care about the environment.
Technical specifications:
• Total power consumption: 6,2 kW
• Compactor size: 2000 x 600 x 1700mm
• Weight: 690kg
• T...
7
The briquetting press ready for immediate use
The briquetting press is designed for pressing sawdust and wood chips of all kinds into briquettes. The design of the briquetting press is compact, handy and produced in Germany. The large oil tank ensures that the oil cannot overheat during continuous operation. The briquetting press is immediately ready for use and does not have to be installed first - so plug in and go.
Ytgskk
2
Also different models avaliable !
1. Briquette Diameter: Ø 200mm
2. Capacity : 12.000 kg / hour ( Steel)
3. Preliminary Compression Ram Thrust: 50 tons
4. Main Compression Cylinder Thrust: 850 tons
5. Maximum Working Pressure: 300 bars
6. Cycle Time : 10 - 12 sec
7. Electric Motor Power: 6x37=222 kW (Main Motors)
8. Machine Dimensions : 11.000mm x 10.000mm
9. Machine Weight: 60.000 kg
10. Screw drive feeders will fill the compression chamber automatically and built-in vibrating hopper will pr...
35 operating hours
* Includes 1 year warranty.
Your advantages:
+ very robust, simple technology
+ Top price-performance ratio
+ Suitable for continuous operation
+ Long-standing, well-functioning / established machine
Including control cabinet with timer operation
Press is switched on manually and then runs until the time set on the timer (e.g. 4 hours) has elapsed. Then the press switches off.
Technical data:
Briquette dimensions: approx. 35 x 35 mm (square),
briquette length: 5-40 mm *dependi...
Also different models avaliable !
1. Briquette Diameter: Ø 160mm
2. Capacity : 4500 – 5500 kg / hour (Iron & Steel)
3. Preliminary Compression Ram Thrust: 50 tons
4. Main Compression Cylinder Thrust: 600 tons
5. Maximum Working Pressure: 300 bars
6. Cycle Time : 12 - 14 sec
7. Electric Motor Power: 170 kW Overall
8. Machine Dimensions (Width x Length x Height): 5200mm x 8000mm x 3100mm
9. Machine Weight: 42.000 kg
10. Screw drive feeders will fill the compression chamber automatically and bui...
11
Very robust machine with high pressing force and permanent agitator.
- is also suitable to already produce a saleable briquette quality *depending on the material. The large dimensioned press cylinder and the 80 mm briquette make this possible.
Our best selling briquetting press series
+ Tried and tested, simple technology, for extremely low susceptibility to faults
+ 25 years of experience, further development and know-how
+ More than thousand machines of this series in operation with satisfied...
5
The production of briquettes has the following advantages:
• Reduction in volume by up to 90%
• Emulsion recovery
• Cost savings in storage and transport
• Inexpensive disposal
• Profitable sales
----
Briquetting press NEM 90
Throughput: up to 90 kg / h (depending on the material),
Briquette diameter: Ø 50 mm,
Motor: 5.5 KW,
400 volts / 50 Hz / 3-phase,
Pump: 40 liters,
.
Briquette length max .: 50 mm,
Briquette length opt .: 40 mm,
Diameter silo: 1,000 mm,
Silo: 0.5 m³
Including agitator,
Oil...
3
Briquetting press for aluminium chips
Equipped with special, optimized agitator, specially hardened wear parts and NEM sensors
Video of the plant can be sent to you.
*suitable for continuous operation
Demonstration machine with 15 operating hours
technical data:
Briquette dimensions: approx. 30 x 30 mm (square),
briquette length: 5-40 mm *depending on material
throughput capacity: up to 25 kg/h. *depending on material
when tested with the material on the pictures approx. 21 kg/h
Dimensions of th...
4
Deduster Alko Mobil Jet 300 with muetek briquette press MPP 60.
Consisting of:
1) Extraction unit MMJet 300
- approved for indoor installation,
- 400 V, 50 Hz, 3 ph,
- nominal volume flow: 5089 qbm/h according to GS-H0-7,
- max. volume flow 6000 m³/h,
- compressed air cleaning (compressor to be provided by customer),
- pre-separator,
- integrated automatic loosening system,
- suction connection: 300 mm,
- motor: 7,5 kW,
- negative pressure: 2280 Pascal,
- Filter surface: 30 sqm.
2) Briquetting p...
Used Briquetting presses
Search Machineseeker now with more than 200,000 used machines:This may be of interest to you
Olympic Games: Machineseeker sponsors Team Germany
Morlock Motors official partner of Machineseeker and Truckscout24
Photo gallery: the 10 strongest forklift trucks in the world
Machineseeker still biggest sponsors of 2nd German football league
Sample sales contract for used machines in nine languages
Sell now on Machineseeker! Over 220,000 inquiries per month
