Garbage press container, garbage press, press container, garbage container, self-press container, mobile waste press, paper press container, paper container
Uoqabnme
-Paper container: Alu
-lockable
-with: transport rollers
-Dimensions: 680/500/H1000 mm
-Weight: 16.5 kg
/ year of construction: 2012 / CE-conform / galvanized landing / Höcker PMA-U 160/19/3,00-15H pressurelesspaper material separator, year 6/2010
Nzlft
Unused was only around rust only inside from the outside as good as new 6 m long 400 V
W37dtqjh
Presscontainer Ludden + Mennekes
Bssqcb0dbk
Type: LM 22 GL
Build in: 2007
Volume: 22m3
Backdoor: side hinged
Lifting system: hook
Waste compacting container WAGNER type VIPLM 20
approx. 40 m³
with press
approx. year of construction 1980
good condition
Eb232kec3
Compactor for hook-lift systems according to DIN 30 730
Smoothline construction conical shape;
With silent pump
Feed opening 1480 x 2090 mm in front of plunger;
Feed opening: 1000 x 1860 mm
SPS control;
With radial sheets (left & right);
Primed and coated in RAL colour of your choice
Standard equipment:
Pick-up system in the rear with 2 rollers frontsides;
Pick up system fold down and hinged at front side;
Bu2bu92i2j
With paper rack;
With steel wiper in front of ram plate;
80 % fill level signal
Garbage press container, garbage press, press container, garbage container, self-press container, mobile waste press, paper press container, paper container
Qkzzyyjl7
-stationary press for: swap bodies
-Infeed chute: covered
-Pressing process: hydraulic
-Pressing process: automatic
-Safety emergency switch: on the feed chute
-Piston dimensions: 1450 x 650 mm
-Stroke piston: 1100 mm
-Transport dimensions: 2100 x 4500 mm
-side thread ratchets for skip containers
-Function tested
Bergmann MPB405 wet waste compactor / oscillating piston compactor
10cbm capacity
7 machines available
Year of manufacture 2012-2015
Fh38xv2
.
Filling opening 1400x1000
246kN pressing force
Remote control
Sale is overhauled and tested
Painting in desired RAL color possible
Gladly we provide an offer incl. delivery
2 presses and 4 containers in good condition
Br3haqcnmx
Presscontainer Bergmann APB0606SN20/HKV
Build in 2005
Volume: 20 m3
Backdoor: Side hinged
Ulhofrff
Lifting: Haken
AJK Compactor
Buy
Olz7l
Renting/Lease
Custom solutions possible
Official dealer AJK
Extra mini press container
Oalowla
used container paper press
Puf0me
Press container for roll-off tipper
Type LM20
20cbm capacity
hooks on both sides / 4 rollers
discharge door hinged on the side
remote control for ramp operation
Serviced, inspected and maintained
Fully functional and ready for immediate use
Painting in desired RAL colour possible
Delivery possible
U0hinuup
For further information please contact us.
Husmann MP 1300 TS press for a pressbox. I have other Husmann press models on offer.
Ygoa9ikkw
Presscontainer Jamicon
P287g8y
Type: JMC 3-20 HK Din 1000 KAM
Build in: 2006
Pressing force: 34 ton
Volume: 20m3
Lifting system: Hook
Backdoor: Top hinged
VP 6
Overall dimensions
1380x1050x2080 mm
Weight (kg)
1000 Kg
Bale size
800x600x800 mm
Bale weight
120-200 Kg
Power boost
6 t
Stokkermill VP vertical compacting presses are ideal for the recycling industry, transformation and service activities. They are solutions to reduce the volume of waste material such as paper, cardboard, plastics, various packaging, PE and PET bottles.
Stokkermill VP vertical presses are equipped with a bale binding and ejection system and can be equipped with an ...
5,5 kW
Bungrbse3n
12,5 A
weight 4030 kg
Meuelenbroek 10m3 compactor with candlestick
Tilt is suitable for 240L containers
Equipped with hook arm point (narrow)
pickup points for portal system
Bocwympln7
Rolls backside
Possibilities:
Buy
Rent / Lease
Adjustments / preparation is possible
Prices are ex VAT
BTS-1100L Bin Compactor
With the BTS-1100L Bin Compactor for 1100, 770 und 660 Lt. garbage wheelie bins large bulky rubbish but also cardboard and recyclable materials is compacted easy and safe to a minimum of its size. This gives users the advantage of reducing the container volume up to 75%, waste disposal costs are reduced sustainably and a safe and clean working environment is also created.
- Compaction up to 75%
- Reduces frequency of waste collection
- Useable for wet and dry waste
- Op...
We sell and rent prescontainers from manufacturer LUDDEN & MENNEKES GmbH!
Technical specifications:
Year of construction: 2007
Front hook (foldable)
Very quiet hydraulic pump <63 dB (A) Timer for setting the pressing time
Volume: 20 m³
Container gauges: (L1 x W x H): 6.140 x 2.500 x 2.600 mm
Landing hole 1,780 x 1,880 mm
Filling opening: 1.465 x 1.880 mm
Pressing system: horizontal pressure plate Pressure piston height: 600 mm
Productivity per hour: 105.0 m3
Cycle time: 55 s
Engine power: ...
Press container Ludden + Mennekes
Type: LM 22 GL
Build in 2007
Volume 22m3
Door: Side Hinged
Uz8qnck
Lifting: Hook
Has signs of use, works perfectly.
Brvfsidrmi
An inspection in advance is possible at any time.
Viewing only with appointment!
Year of manufacturer- 2011
Capacity- 16 m3
Okb7z
Weight of press container- 4590 kg
For the device applies: - basic repair, - paint new - RAL as desired - hose lines new - oil and filter new, tank cleaning - electrical control elements new - wear parts, such as polyamide new Optional: - polyamide rollers in front (important when setting up at ramps or at buildings) - full signal - liberation circuit - 2x emergency stop cover
Bfo0iu0hwn
The FK advantages at a glance:
- Qualitative components
- CE mark
- Pre-announcement included
Iwflhkv
- Rubber seal all around high included
- Strong price / performance ratio
- Robust construction
- RAL paint of your choice included
- Phase inverter included
- Quiet running pump incl.
- Lockable lid Filling opening incl.
- Retaining teeth included
- Hook holder rear side incl.
- Further versions on request
- Steel wiper in front of piston incl.
-Incl. additional control panel for safe control
P...
We sell and rent prescontainers from manufacturer LUDDEN & MENNEKES GmbH!
Technical specifications:
Year of construction: 2013
Front hook (foldable)
Very quiet hydraulic pump <63 dB (A) Timer for setting the pressing time
Volume: 22 m³
Container gauges: (L1 x W x H): 6.620 x 2.500 x 2.600 mm
Pressing system: horizontal pressure plate Pressure piston height: 600 mm
Productivity per hour: 105.0 m3
Cycle time: 55 s
Engine power: 5.5 kW
Pb7rx
PREIS BEI REQUEST!
We have more presscontainer fr...
Presscontainer Kiggen PD 731
Brpk0jkfju
Build in 1997
Volume: 20 m3
Pressure 34 ton
Backdoor: Top hinged
Lifting: Hook
10cbm press container for skip loaders
.
Weight: 2800 kg
max weight: 10000kg
Machine length: 4400 mm
Machine width: 2000 mm
Machine height: 2500 mm
79okzbyd8
Opening: 1300x1400mm
.
Press container is checked, serviced and painted over
Varnish in desired RAL
.
We will gladly create a quote including delivery.
Static press Husmann ST-SEN
5,5 kW
Dsi3kyp
The following applies to the device:
- basic repair,
- Paint new - RAL as desired
- Hose lines new
- Oil and filter new, tank cleaning
Qzn2fo2k
- electrical controls new
- Wear parts, such as polyamide new
optional:
- Polyamide rollers at the front (important when setting up on ramps or buildings)
- Full notification
- Liberation circuit
- 2x Emergency-Off
- Lid 2-piece side opening (suitable for ramp installation)
The FK advantages at a glance:
- Qualitative components
- CE + GS certificate
Mviol
- Pre-announcement included
- Rubber seal 1000mm high included
- Strong price / performance ratio
- Robust construction
- RAL painting included
- Quiet running pump
- Lockable lid filler opening included
- Retention teeth included
- Phase inverter included
- Further versions on request
Pick-up vehicle skip loader EN DIN 30 720 / hook pick-up EN DIN 30 722
Container volume
6, 8, 10, 12 cbm Motor 5,5 kW
Working vo...
container press, waste press, press container
B3kox
Manufacturer: Turner GmbH, Oberursel-Taunus
Type: 902
Machine no.: 33387
Operating hours: 1,000 Bh (estimated)
Total dimensions: 5000 x 2500 x 1400 mm (1940mm incl. control cabinet) (L x W x H)
Dimensions filling opening: 1740 x 1460 x 960 mm (L x W x H)
Filling: from above
Dimensions outlet opening: 1460 x 800 mm (W x H)
Press volume / stroke: 1.83 m³ (1900 x 1460 x 660 mm)
Stroke duration: approx. 20 sec.
Lift control: fully automatic
Weight:...
Press container AJK 20L
Build in 2000
Volume 20m3
Pressure 34 ton
Door: Side Hinged
Lifting: Hook
Blwfypzcio
With Tilter
- very good condition
Icpzsqcl
- Swedish hook standard
- will be repainted
- year of manufacture 2003
- container size 30m3
- pressing unit dimensions: 2850x2250x2270, weight 2500kg.
Roll-off compacting press
LOADING PORT LENGTH 1550 mm
LOADING PORT WIDTH 1540 mm
LOADING PORT HEIGHT 1270 mm
POT. ELECTRIC MOTOR 9.2 Kw
COMPACTION FORCE 45 Ton
CONTROL UNIT OIL QUANTITY 200 lt
PISTON STROKE 1950 mm
PUMP FLOW 65 l / 1 '
WORKING PRESSURE 200 bar
COMPRESSION CYCLE 63 sec.
Oy0hh
Machine complete with 2 demountable containers with internal sheets to be redone, and all CE manuals for both the machine and the boxes.
The following applies to the device:
- basic repair,
- Paint new - RAL as desired
- Hose lines new
- Oil and filter new, tank cleaning
- electrical controls new
- Wear parts, such as polyamide new
optional:
- Polyamide rollers at the front (important when setting up on ramps or buildings)
- Full notification
- Liberation circuit
- 2x Emergency-Off
- Lid 2-piece side opening (suitable for ramp installation)
W8f2g
New 20cbm compactor in Frankfurt / Main
- Rear wheels and drop down hook plus rear hook
- 75% and 100% signal
- oil level sensor
F73vcr9z3
- waste blocking teeths
- back door gasket
- double wungs lid
- remote control
- steel scraper at the bottom of the ram
- phase changing switch
- silent pump
Warehouse: Frankfurt Main
5,5kW, 400 Hz, Leergewicht 3240 kg
Glwy7f2
Husmann ST-AN stationary press with ramp hopper
Overhauled in 2019, since then in operation for several months
Bnp3mh22iv
New docking hooks, new controls, new guides!
Drive power: 5,5 kW
pressing force: 34 t
Two pieces reachable
Stationary press with two 20m3 container in very good condition. The machine will be repainted.
Year of manufacture 2002
Bbphtn80
Pressing force 27 ton.
Electric motor 5,5 kW
Power supply 400 Volt
Price on request
The following applies to the device:
- basic repair,
- Paint new - RAL as desired
- Hose lines new
- Oil and filter new, tank cleaning
- electrical controls new
- Wear parts, such as polyamide new
optional:
- Polyamide rollers at the front (important when setting up on ramps or buildings)
- Full notification
- Liberation circuit
- 2x Emergency-Off
Be38i8tnde
- Lid 2-piece side opening (suitable for ramp installation)
Small reducer for bins (660l - 1100) for indoor and outdoor use.
Different bins are possible. Different RAL colurs available.
Lj3e7lo
For more information please ask our sales team.
5,5 kW, 400V,
Suoybg
+ container
Stationary press with pre-pressingplate and 30m3 container in very good condition. The machine will be repainted!
Year of manufacture 2001
Pressing force 38 ton.
Bl8x2kfgye
Electric motor 7,5 kW
Power supply 400 Volt
Container size 30m3
Price on request
6 months warranty!
The following applies to the device:
- basic repair,
- Paint new - RAL as desired
- Hose lines new
- Oil and filter new, tank cleaning
- electrical controls new
- Wear parts, such as polyamide new
optional:
Be38ilrb2c
- Polyamide rollers at the front (important when setting up on ramps or buildings)
- Full notification
- Liberation circuit
- 2x Emergency-Off
- Lid 2-piece side opening (suitable for ramp installation)
The FK presses series combines quality with strong price / performance ratio. High productivity with short Armotisationsdauer are distinct advantages of our compression equipment.
The oscillating piston press suitable for wet waste in particular for hospitals, nursing homes, catering and wholesale markets, since the container is waterproof and prevents therefore spills and leakage. Due to the special construction, regular and time-consuming cleaning operations are not required. We also offer odo...
Press with container
Engine 5,5 kW
400 V
Inh2zkh
The following applies to the device:
- basic repair,
- Paint new - RAL as desired
- Hose lines new
- Oil and filter new, tank cleaning
- electrical controls new
2riac3
- Wear parts, such as polyamide new
optional:
- Polyamide Rolls Comp. (important when setting up on ramps or buildings)
- Full notification
- Liberation circuit
- 2x Emergency-Off
- Lid 2-piece side opening (suitable for ramp installation)
