Technical data double screw conveyor
Manufacturer Herbold Meckesheim GmbH
Type Trough screw conveyor
Year of manufacture 2002
Drive power 2 x 5.5 kW, 11.4 A, 400 V, 50 Hz
Length of screw conveyor bed 5,000 mm
Screw diameter 500 mm
Length of screw box total 6,900 mm
Bkky8882an
Transport dimensions 8,500 x 1,600 x 1,200 mm (L x W x H)
Comments:
Documentation on the conveyor belt is no longer available and would have to be requested by the customer from the manufacturer. We assume no liability fo...
• Chain conveyor 1400 mm wide x 14 m long
• Swan-Neck
• Above floor feed hopper
Hynpthj
• Electric motor drive
• Safetech system
Feeder Jöst
Type: FMF
length 3600 mm - width 300 mm
Bpd8t3jqlu
Drive by magnet vibrator
Incl: Control equipment.
band width 450 mm
length in total 3900 mm
height 1200 mm
Bjx08jptc8
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
Trough tape rubber
Br=1000
L= 9500 hoh
Oqbftxbb
4Kw
80Rpm
Also various sizes flat and trough conveyors available
On request
- Caterpillar C2.2 engine with 49HP (36kW)
- 18m length, belt width 800/900mm
- EP400 3 ply conveyor belt
- galvanized inner legs, polyurethane belt scraper, remote greasing, hydraulic cylinders for raise and lower, CE marked
- 8000Kg approximately
Belt Width Gurtbreite 800mm/900mm 36”
Belt Length Bandlänge 18m/19m 60’
Arbeitsmaße
Discharge Height 8m 27’
Working length 18m
Working width 2220mm
Transportmaße
Transport Height 2460mm
Transport width 2220 mm
Bfsgm98s7i
Transpor...
Technical data for the conveyor belt
Manufacturer Hunkeler Systeme AG, Switzerland
Type GGF 1000
Year of manufacture 12/2018
Drive power 3 kW
Belt speed 0.3 m/second
Length ascending belt 6.800 mm, gradient 32°
Length of gooseneck 1,600 mm, gradient -22°
Effective width 970 mm
Transfer height 3,260 mm
Conveyor belt fitted with vulcanised carriers 40 mm high
Height of side wall of ascending belt, inside 810 mm
Transport dimensions 10,000 x 1,600 x 1,800 mm (l x w x h)
Weight approx. 2,5 t
New pri...
SBS TC10 has been designed and manufactured to take into account the requirements related to the recycling of materials resulting from demolition and restructuring works in the construction industry, discarded materials from marble processing and cement products. Within the limits allowed by the machine's technical specifications, these materials are separated according to their granulometry. The machine can therefore be used directly in building yards or, if necessary, for processing stocks of ...
Feeder Jöst
Type: FUF
length 3500 mm - width 500 mm
Bpd8s9v9pr
with two vibration motors of 1 kW each
band width 450 mm
length in total 3000 mm
Bjx08tayw9
height 1000 mm
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
mobile conveyor belt, belt with cleats, inside width 500 mm, axle distance approx. 5300 mm, gear motor 0,55 kW, mechanically height adjustable.top condition, ready for use
Bskk7f9fbb
semi-mobile conveyor belt, belt length 4 m, electric drive 230 V
foldable to transport length 4 m, forklift pockets for loading,
belt width 400 mm,
E0tzxw3kc
Technical data conveyor belt
Manufacturer Bollegraaf
Btsoxwez32
Typ HBT 600/2000 x 21.986
Year of contruction 2000 (overhauled 2020)
Drive power 7,5 kW
Length infeed conveyor over all 6,723 mm
Length module infeed conveyor 5,500 mm
Height infeed conveyor over all 1,300 mm
Height side wall infeed conveyor 500 mm
Length elevating conveyor over all 13,923 mm
Lenght module elevating conveyor 13,300 mm
Height side wall elevating conveyor 800 mm
Gradient of elevating conveyor 30°
Length gooseneck 1,3...
100 Pcs. Feeders with Magnetic Vibrators and Unbalance Motors.
Owj2v
Find our complete stock on our website.
Different widths and lengths.
With different vibrators from quality manufacturers like Aviteq / AEG, Jöst, Friedrich, UHDE, Vibra, Honert, Herweg.
Also in stainless steel or for example covered with ceramic or rubber.
Please contact us to find a suitable feeder for you.
Feeder Jöst
C0osmhx
Type: FUF
length 5000 mm - width 500 mm
with two vibration motors of 1,6 kW each
band width 450 mm
length in total 3000 mm
height 1200 mm
total power requirement kW
weight of the machine ca. t
N7h9b
dimensions of the machine ca. m
Chain conveyor, Nr. 3
Producer – Bluetech, Check Republic
ID no – 12V0085/2
Tipe “L”
Gccjzwoik
Production Year – 2012 m;
Dimensions LxB ; 6300 x 2000 mm;
Working width – 1450 mm
Side height – 1100 mm
Very good condition
New chain conveyors for wastes, plastics, papers etc.
All dimensions by request.
We can find best solution and produce chain conveyor as you need. Write dimensions and transporting materials what You need. We prepare drawings, calculate price and production term.
We produce different types and dimensions conveyors.
Belt conveyors;
Chain conveyors;
Screw conveyors.
Chain-tube conveyors
Motecha, UAB products:
Conveyors;
Dosage bunkers with moving floors systems;
Waste plastic washing machines;
...
Technical data for the conveyor belt
Manufacturer Paal
Type KEM 1200
Mv8oi8
Year of manufacture 2004
Drive power 4 kW
Length feeding belt 3.310 mm
Length ascending belt 10.100 mm, incline 30°.
Length of gooseneck, 1,580 mm, slope 10°
Effective width 1,200 mm
Transfer height 3,260 mm
Height of side wall of infeed conveyor, inside 527 mm
Height of side wall, inside 777 mm
Centre distance 15,125 mm
Remarks:
The conveyor belt is in really good condition and can be reassembled and used straight away...
Forderband
L : 570 cm
B : 60 cm
B tot : 90 cm
V: 0,285 m/s
Mvccco
Tech. motor .
: 3 fase 400 volt, 1,1 KW, 46 RPM
UHDE feeder
2 types in stock :
*length 1700 mm - width 430 mm
*length 1200 mm - width 430 mm
Buyrrwkd0
Drive by means of magnetic vibrators
Incl: Control equipment.
band width 450 mm
length in total 3000 mm
Bjx083r8la
height 1000 mm
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
Chain conveyor, Nr. 2
Producer – Bluetech, Check Republic
ID no – 12V0085/1
Tipe “L”
Btrilhwdub
Production Year – 2012 m;
Dimensions LxB ; 8200 x 1500 mm;
Working width – 980 mm
Side height – 800 mm
Very good condition
Unused, Nilos B1400 ST1250 6S+5S DINX-2N203, 10 coils, steelwire corded
Xlmlw3t0a
BACK
Articlenumber : KB-1060
Make : Nilos
Model : B1400 ST1250 6S+5S DINX-2N203
Year : Unused
Dimensions LxWxH (mm) : 10 coils ( max. dimensions 2060 x 1400mm) Ca. 1680 mtrs in total
Total quantity in stock : 10
Weight (Kg) ca : 59400 in total
Country of origin : Germany
Quality : Steel wire corded (5,0mm)
Comments : New rubber conveyor belt
Price: EUR 0,60 per kg netto ex stock Boxmeer, NL
Technical data conveyor belt:
Manufacturer unoTech
Typ KTH 1700
Year of construction 2009
Iwhgcev
Driving motor 5,5 kW
Length feeding conveyor 6,000 mm
Length elevating conveyor 10,233 mm
Gradient elevating conveyor 30°
Length goose neck 1,500 mm
Gradient slope goose neck 20°
Effecting width 1,700 mm
Height of side wall feeding conv. 500 mm
Height of side wall elevating conv. 1,000 mm
Height of drive axle above ground 4,200 mm
Dimensions insertion shaft 2,000 x 1,200 x 1,500 mm (w x d x h)
Trans...
Magnetic vibrator Jöst (unused)Brand: Jöst - Type: MS10 -42 Amp.excl.: Control apparatus.
Npm9d
Elevator belt with rollover magnet
ELSTO three-phase AC motor 3.0kW 260/400V - 3-phase-50Hz V AC 14.6Nm Rated current 4.9A
Conveyor type EP400/3 4+2 endlessly hot vulcanized
Dimensions 1000x7000
Consisting of
-conveyor
-support
-head roll magnet
Bjqmcaaazm
-instorttrechter
-outlet funnel
-Slide channel magnet
Chain conveyor, Nr. 1
Producer – Bluetech, Check Republic
ID no – 11V0746
Tipe “Z”
Production Year – 2012 m;
Dimensions LxB ; 9800 x 1600 mm;
Working width – 1080 mm
Btriir2q9y
Side height – 800 mm
Very good condition
Ludden + Mennekes Belt conveyor, consisting of feeding conveyor and elevating conveyor with goose neck, constructed 2000, Type GGF 1800, Effective width approx. 1800 mm
Technical specification:
Manufacturer: Ludden + Mennekes
Type: GGF 1800
Year of construction: 2000
Drive power: 14,7 kW
Transfer height: 6.100 mm
Part 1 - Feeding conveyor
Length: Approx. 11.550 mm
Effective width: Approx. 1.800 mm
Nmzcd
Part 2 - Elevating conveyor
Length: Approx. 13.500 mm
Effective width: Approx. 1....
Conveyor belt LKOREMAN
Brand: LKOREMAN
A.A Length = 3,000 mm
Bifeao7ozj
belt width: 650 mm
Drive: 1.5 kW electric motor.
Speed: about 1 m/sec.
Schwerlastrollenbahn / Transportrollenbahn
Laenge 4.000 mm
Budf8bp0
Transportrollen Breite insgesamt 1.450 mm
Geteilte Rollenbahn
Rollen Durchmesser 100 mm
Rollenabstand 650 mm
Two peaces of belt conveyors for sawdust, wood chips or bark.
The length is 165 meter and 50 meter. More info on e-mail.
L9mja9on
Chain drive with cable control
hydraulically foldable headboard
enlarged charging hopper
Hardox wear lining in the feed area
efficient segment belt scraper
Bjgyxq9ngf
capacity max. 600 to/h
Sorting belt, feeding belt Westa, type F 250, including supports, 7000 mm length
Technical specification:
Manufacturer Westa Fördertechnik
Drive power 0,6 - 3 kW
Feeding belt 7000 mm
Belt width 1200 mm
Side wall height 150 mm with funnel
Transfer height 1420 mm
Velocity 12-60 m/min
Please note:
All technical data refer to specifications of producer/owner. We will not assume liability for the given statements and possible errors.
This offer is non-binding, prior sale excepted und revocable at an...
Conveyor belts Kleemann, heavy-duty design
Bnvpgjloav
Brand: Kleemann
Strip width: 1400 mm;
A.A length = 24,000 mm.
Drive: 2 slip-on gears of 22 kW each.
Weight: about 13 tons per piece.
Stock: 4 pieces.
Corrugated Knuckle Conveyor
290mm cleat width
430 mm Stud spacing
Corrugated edge 75mm
Belt width approx. 520 mm
Horizontal 2.000mm
Rising part 1500 mm
Drop height approx. 1.700 mm
I9eba3l
height floor - corrugated edge 900 mm
Frame width 650 mm
With motor, ready for operation, used device without guarantee/warranty.
Scraper conveyor: 5m
Width: 0,55 m
Height: 0,5m
Inner width: 0,38m
Carrier divide: 500mm
Belt incline: 30°
Drop height: 2,5m
Nlegh
with swivelling slewing ring
without engine
I have for sale conveyors of various lengths and widths. Good technical condition.
Bejia0qwml
We sell conveyors (removal), rollers
4600x1200x1100 mm; tape - 1000mm;
Gbgu7akj
Drive shaft - 320 mm, drive shaft - 220 mm;
Side height - 160 mm
Price EXW Vilnius - 1400 eur
Conveyor belt, in bent and shaped sheet metal, with pedestals to allow inclination.
Dimensions:
Length: 4.50 m
Width: 0.60 m
Thickness: 0.40 m
Bl9dabuvbr
Loading height from layout in photo.
Unloading height 1.00 m
Rigid weft slatted PVC tape, strip pitch 40cm, strip height 4cm with spondaflex h40 side edges. Tape development
Mt.9 x 0.60 closed in a ring.
Magnetic iron removal roller, diameter 180mm, length 600mm with shaft in stainless steel AISI 304.
Motorized with gearbox and 1.1 kW motor. + ...
conveyor belt
Brand: LKOREMAN
A.A Length = 50.000 mm
belt width: 650 mm
Skkfxm7l
Power requirement: Shaft mounted gearbox 7.5 kW
With mobile dropping cart.
*For further information please contact us: Youssef Sebti
Barisco
Casablanca, Morocco
E-mail: youssefsebti@barisco.ma
Mob :+ 212 661 21 75 83
Video: https://youtu.be/TTXkOfM72a8
Chain conveyors are design for the transport of rails, pipes and other profiles.
Robust design manufactured with Hardox wear plates ensures heavy-duty transporting process.
The conveyor is mounted on three base plates, two of them are with compression spring to absorb shocks. They can be also mounted on fixed base plates without compression springs.
Suitable for dirty and oily environments
Simple design with exceptional durability
Bjq2okwo7a
Ideal as a single or multiple line system
Steel driver...
Inside width: 430 mm
Inside depth: 550 mm
Length: 7300 mm
Driving power: 15 kW
Driving Speed: 38 1/min
Dpjnfef
Operating voltage: 3 x 400 V AC + PEN, 50 Hz
The conveyor is designed for manual sorting of solid waste by operators. The operator visually identifies the useful fractions on the conveyor belt and places them in the containers intended for this purpose, standing along the belt.
To facilitate the work of personnel, the conveyor has no sides. The conveyor is driven by cylindrical-conical gear motor "Bonfiglioli" (Italy)
1) The tape is equipped with a seal along the edges to prevent spilling of solid waste under the canvas.
2) The drive is l...
WE SELL CHAIN REQUIRERS!
Technical specifications:
Horizontal part - 3200 mm
Working width - 1200 mm
The rising part - 13200 mm
Brjusiywsd
Side height - 600 mm - 600 mm
Power - 4 kW
Good condition!
The pits housing shield
Price for SALE EXW VILNIUS, LITHUNIA - 10000 Eur
Brand NEW roller conveyor belt. The belt has the following technical characteristics: total length 11.100mm; width 2000mm; useful transport width 1400mm. Roller shutter belt + rubber coating with transport flights. 7.5 kw motor and reducer. conveyor chains pitch 200. Central emergency rope stop. Certification CE.
St3odg
This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
How to receive 100% of our e-mails
Morlock Motors official partner of Machineseeker and Truckscout24
Photo gallery: the 10 strongest forklift trucks in the world
Sample sales contract for used machines in nine languages
10 valuable tricks for buying used machines online
