Used mills for sale (139)

Condition: used, Year of construction: 1973, operating hours: 3 h, functionality: fully functional, machine/vehicle number: GM900, total length: 17,100 mm, total height: 4,340 mm, total width: 3,363 mm, overall weight: 7,000 kg, frame height: 4,340 mm, frame width: 2,780 mm, For sale is a cross-flow shredder mounted on a VOEST GM900 frame. The cross-flow shredder can be operated with two or three chains. The shredding chamber is open and can be equipped with different grating grids. After shredding, a permanent overband magnet is installed. The system control was newly purchased and installed. The system can be disassembled for transport. Guedpfxjz Sp Eco Aafei

Condition: used, functionality: fully functional, overall weight: 2,800 kg, total length: 2,750 mm, total width: 1,500 mm, total height: 1,800 mm, input voltage: 400 V, rotor diameter: 730 mm, rotor width: 600 mm, Hammer mill with swing hammers for secondary size reduction of cable scrap, aluminium, e-scrap and non-ferrous metals. Technical data: – Rotor: hammer circle diameter approx. 730 mm, width 600 mm, rotor discs Ø 520 mm – Hammers: plate type 215 × 100 × 13 mm, bore 35 mm – Screen: replaceable perforated screen, one fitted Gsdpfx Aaez I I Hvefjui – Drive: V-belt, ABB motor frame 225 (approx. 37–45 kW), 400 V / 50 Hz – Electrics completely renewed, new control cabinet included – Hinged upper housing – Dimensions approx. 2,750 × 1,500 × 1,800 mm incl. motor and hopper, weight approx. 2,800 kg Scope of delivery: mill with motor, belt guard and control cabinet; new complete wear part set (hammers, pins, spacer rings, unused); discharge belt conveyor with gear motor. Nameplate missing, manufacturer unknown. The machine runs without problems. Inspection and test run by appointment on site (Cheb, Czech Republic). Loading onto truck on site. Sold as is, price net plus VAT.

Condition: used, Year of construction: 1990, functionality: fully functional, overall weight: 15,000 kg, rotor diameter: 1,000 mm, This unit was in operation but was shut down due to economic reasons. It has now been out of service for 5 months. Guedpjzc H Nvofx Aafoi The unit is suitable for a feed size of up to 32 mm and produces a high-quality, cubical-shaped grain. It is electrically driven by a 160 kW motor!

Condition: used, Year of construction: 2012, operating hours: 6,800 h, functionality: fully functional, SBM Crushing Plant Type: Impact crusher, type RHSM-3 Crusher with transfer conveyor Single-deck screening machine 4 x conveyor belts with oversized material return to the crusher Metal detector Performance parameters -Feed size: 0-800 mm -Feed rate: up to max. 130 t/h -Inlet opening: 725 x 1260 mm Gedpfozv Edwex Aafoui -Rotor diameter: 1160 mm -Electric motor: 132 kW -Hydraulic unit: 3.0 kW Current application: Asphalt recycling

Condition: used, machine/vehicle number: 14205, Rotor diameter: 560 mm Rotor width: 1000 mm Number of rotor blades: 7 Number of stator blades: 2 Inlet cross-section: approx. 720 x 980 mm Godpfo Aixlyox Aafsui Drive motor: approx. 90 kW

Year of construction: 1988, condition: good (used), functionality: fully functional, The offer includes: Herbold feed conveyor, S&S metal detector, Herbold granulator with 8, 10, and 12 mm screen baskets, 7.5 kW extraction fan made from Hardox, dedusting system with cyclone and rotary valve for separating fines from the ground material, transfer fan for Big Bag filling, Big Bag station for two Big Bags with pneumatic switching, and control cabinet with overload protection. Gusdpfsygv Uiex Aafsi

Condition: good (used), Year of construction: 2010, Item: Disintegration mill Type: Tyre shredder Input material: Car tyres, sports flooring Required particle size: Pre-shredded to max. hand size / < 100 mm see PDF Gedpfxsx U Dvlj Aafsui

Condition: excellent (used), Professional granulator from the German brand Dreher – model S 26/26 GFS-SPEZIAL. This unit is designed for shredding plastics from injection molding or extrusion processes. It features a robust construction, a proven VEM 7.5 kW motor, and a three-phase 400 V power supply. The machine has a large feed hopper, convenient service access, and a control cabinet with an emergency stop button. The installed low-speed three-phase motor provides high shredding power while maintaining stable operation. • Motor power: 7.5 kW • Power supply: 400 V 50 Hz • Speed: 1500 rpm • Performance suitable for medium and large injection molding machines • German quality • Robust frame and blade construction In very good condition, mechanically inspected, and ready for operation. Guodpfoz Sk Dujx Aafsi

Condition: good (used), functionality: fully functional, Year of construction: 1998, 1 unit, used. Shredder mill including dust extraction and soundproof housing. Manufacturer: HERBOLD Godpfxo Ahd Ubo Aafjui Year of manufacture: 1998 Type: SML35/42 S3/2-2 Infeed size: 410 mm x 350 mm Rotor diameter: 420 mm Motor power: 18.5 kW

Condition: good (used), Year of construction: 1990,

Condition: used, No. 04554 Granulator / cutting mill Alpine RO 40/63 Used Robust granulator / cutting mill for the size reduction of plastics, blown film and cables Motor power 22 kW Rotor width 630 mm Rotor diameter 400 mm Rotor knives: 5 rows with 3 knives each Stator knives: 1 row at the front and 2 rows at the rear, with 3 knives per row Maximum permissible speed of the drive shafts 560 rpm 2 inspection openings Screen hole diameter approx. 12 mm Feed opening approx. 630 x 300 mm LW Feed hopper dimensions approx. 850 x 600 mm LW The hinged screen holder allows easy screen changes and facilitates access for cleaning the machine and replacing the knives. Ideal for recycling applications (blown film, cables, plastics, etc.) and food processing (tea, spices, dried vegetables, etc.). Machine ready to plug in, incl. power cable and 63 A plug Transport dimensions machine approx. 1600 x 1500 x 1800 mm LWH, hopper approx. 1400 x 1200 x 800 mm LWH Weight approx. 2500 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Gsdpez Iav Asfx Aafjui Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: used, machine/vehicle number: 11649, Rotor knife rows: 4 Gujdpfx Aoyr Tl Nsafji Stator knife rows: 2 Rotor width: 600 mm Rotor diameter: 280 mm Feed opening dimensions: 400 x 600 mm

Year of construction: 1995, condition: good (used), 600 mm rotor width 7.5 kW motor Godpfx Ajfxg Dlsafjui 650 rpm

Condition: used, machine/vehicle number: 14088, Rotor diameter = 800 mm Gusdpfx Ae Admcneafei Rotor width = 1500 mm Rotor blades = 9 rows Stator blades = 4 pieces Drive power = 200 kW

Condition: used, Shredder / Shredders Manufacturer: HERBOLD Type: SMS 45/100-H5-2 Semi-open 5x2 knife rotor, 2 stator knife rows. The machine is equipped with a replaceable third bed knife (deflector) to handle thick-walled materials. Inlet hopper for conveyor belt feeding. Rotor mounted outside the housing. Gsdpfe Afdinsx Aafsui Housing divided in the middle, can be opened with a hand winch. Double inclined cut design: Rotor and stator knives are arranged opposite each other and cut like scissors. With base frame incl. vibration dampers. Machine data Rotor knives: 5 x 2 Stator knife rows: 2 Drive: 75 kW

Year of construction: 2005, condition: good (used), functionality: fully functional, crusher HARTL PC204N opening: 1.260 x 1.060 mm rotor-diameter: 1.300 mm Gjdpfx Aonxi Dnoafsui new blow bars feed hopper approx. 7 cbm vibrating chute active 2-deck pre-screen side- and main-discharge conveyor overband magnet separator CAT diesel engine C10 (291 kW) weight: approx. 50 t.

Condition: used, machine/vehicle number: 6128, Rotor diameter = 400 mm Rotor width = 700 mm Number of rotor blades = 3 Number of stator blades = 2 Gusdo Admcuopfx Aafei

Condition: new, functionality: fully functional, Year of construction: 2022, Wearing parts SPECIAL OFFER for e.g. SBM 10/10/4 SM, consisting of: Guodpfxey Au Ihj Aafsi 1 pc. grinding plate 160790 4 pcs. spreader segment (2 x right / 2 x left) 05628 4 pcs. spreader segment (2 x right / 2 x left) 05629

Condition: used, machine/vehicle number: 11862, Rotor diameter = 320 mm Guodpfj Aa D D Isx Aafji Rotor width = 440 mm Inlet = 450 x 300 mm Rotor knives = 3 rows Stator knives = 2 pieces Drive = 7.5 kW

Condition: used, machine/vehicle number: 14153, Rotor blades = 3 Gujdpj Aa D Dzofx Aafji Stator blades = 3 Drive power: 4 kW

Condition: used, machine/vehicle number: 10460, Rotor diameter = 400 mm Rotor width = 600 mm Number of rotor blades = 5 Number of stator blades = 2 Drive power = 30 kW Gujds Admchjpfx Aafoi

Condition: used, machine/vehicle number: 12479, Rotor diameter: 300 Rotor width: 600 Rotor knives: 6 Stator knives: 2 Inlet cross-section approx. 519×316 Drive motor: 18.5 kW Pneumatic tilting device for upper housing section Without control cabinet and electrical wiring (can be provided for an additional charge). Godpfx Asyr Ttmsafjui Spare parts and additional plant components are available.

Condition: used, machine/vehicle number: 14002, Unrefurbished housing GSH 800/1200 Godpfx Aae Admcbsfjui Will soon be refurbished and available as a replacement housing. Wet version.

Condition: used, machine/vehicle number: 11550, Rotor diameter: 300 mm Rotor width: 140 mm Guedoyr Tk Sspfx Aafsi 10 rotor knives 2 rows of stator knives Cross section approx. 250 x 300 mm Drive: 5.5 kW

Condition: used, machine/vehicle number: 14062, Rotor diameter: 800 mm Rotor width: 1250 mm Number of rotor blades: 8 Number of stator blades: 4/5 Gedpfx Aez H Dmvjafjui Inlet cross-section: approx. 800 x 1200 mm Drive motor: 110 kW