Used Table Press for sale (26,188)

Condition: used, 2 clamping plates, 1 pair of clamping rails with T-slots Clamping block, press table, auxiliary table with T-slots Length per clamping rail: 900 mm Width per clamping rail: 295 mm Thickness per clamping rail: 130 mm - 6x T-slots, 30 mm - T-slot spacing: 150 mm - 6 holes Ø 18 mm (spacing 300 x 160 mm) - All sides machined surfaces Net weight per clamping rail: 240 kg Dsdpfx Ajxf Uwlocxsup Net weight of both clamping rails: 480 kg Good condition

Condition: used, Used machine 350 W power 230 V, 1420 rpm 5-stage speed adjustment Duodpfx Acjxwz N Eexjp 660/1020/1460/1980/2860 rpm Maximum drilling capacity in steel: 13 mm Availability: short-term Storage location: Röllbach

Condition: used, Rotary indexing table, rotary indexing table with 16 stations Rotary indexing machine + TOX hydraulic press Special rotary indexing machine with multiple assembly stations Dodegd D U Espfx Acxoup Production and assembly line with rotary indexing system From special machinery manufacturer "AKE-technologies GmbH" Serial number: Order number: 11111 Year of manufacture: 2012 - large rotary indexing table WEISS type TC500, with 16 stations - pressing station with TOX power pack - vibratory feeder - conveyor belts - testing stations - some stations still visible in the photos but already dismantled Required space L x W x H approx. 3500 x 2750 x 2300 mm Net weight approx. 3000 kg All in as-new condition – the system was never used in series production.

Condition: used, Single-column hydraulic press SCHÖN type FES / C 7 Machine no. No. 4281 Year of construction 1995 Pressure force 7 ton. throat 170 mm Projection round cycle station 60 mm Dedpfxjr I E Its Acxeup Table size 310 x 200 mm Rotary indexing table Ø 400 mm, with 12 indexing stations Plunger surface approx. Ø 100 mm Plunger plate 315 x 200 x 35 mm Ram stroke 100 mm Installation height rotary table - ram plate max. 130 mm Table height above floor 890 mm Ram speed rapid traverse downwards approx. 300 mm/sec. Ram speed rapid traverse upwards approx. 300 mm/sec. Ram speed Working speed approx. 30 mm/sec. Drive power 1.5 kW Mains connection 380 Volt, 50 Hz Tank capacity approx. 50 liters hydraulic oil - Rotary indexing control via SIEMENS S7- 1200 - GECHTER pneumatic rotary indexing table with 12 indexing stations - Mechanically adjustable fixed stop - Adjustable pressure holding time in the UT - electrical 2- manual operation Space requirement L x W x H 1450 x 850 x 1900 mm weight 700 kg good condition

Condition: excellent (used), Year of construction: 2006, machine/vehicle number: 6513/19, Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Dodpfx Aowu Sg Eocxjup

Condition: good (used), Pressing force: approx. 10 tons Table size: 500 x 300 mm (W x D) Pedal size: 110 x 105 mm (W x D) Installation height: approx. 150 mm (large stroke at the top) Stroke: 5...29 mm Pedal adjustment: 25 mm Other • Rotating wedge coupling • Foot release Dsdpovnrhwjfx Acxjup • Control and protective screen as new, only used very little • Without table

Condition: good (used), Press force: approx. 6 tons Table size: 400 x 300 mm (W x D) Table opening: Ø 133 mm Ram size: Ø 70 mm Thrust: 178 mm Installation height: 240 mm (top stroke) Stroke: 1-100 mm Weight: approx. 480 kg Dusdpfx Aevxvtxocxjp Drive power: 2.2 kW Other features • Hydraulically driven • Continuously adjustable stroke rate • With protective screen for inserting work with secure tools • With height-adjustable mounting bracket (feed optional)

Condition: new, Motor ----- 750W - 230V - 1Phase Drilling capacity ----- 20 mm Pole stroke ----- 85 mm Spindle attachment ----- MK2 Number of speeds ----- 16 Spindle speed ----- 220-2840 rpm Work table ----- 305 x 305 mm Foot ----- 460 x 280 mm Column diameter ----- 72 mm Overall height ----- 990 mm Weight ----- 60 kg Packing ----- 820 x 500 x 290 mm INCLUDING Dusdpfx Acok Iuqyexjp * Digital depth stop * CE hood * Laser device * LED illumination * CE emergency stop * Drill head with MK2 adaptor * Drive key

Condition: new, functionality: fully functional, input voltage: 230 V, input frequency: 50 Hz, type of input current: DC, spindle mount: MK 2, total width: 500 mm, total length: 300 mm, total height: 1,050 mm, table width: 290 mm, table length: 290 mm, overall weight: 47 kg, drilling capacity: 16 mm, column diameter: 72 mm, drill chuck size: 16 mm, spindle speed (max.): 2,840 rpm, spindle speed (min.): 220 rpm, stroke length: 85 mm, Motor ----- 550W - 230V - 1Phase Drilling capacity ----- 16 mm Pole stroke ----- 85 mm Spindle attachment ----- MK2 Number of speeds ----- 16 Spindle speed ----- 220-2840 rpm Worktable ----- 290 x 290 mm Foot ----- 420 x 250 mm Column diameter ----- 72 mm Overall height ----- 980 mm Weight ----- 47 kg Packing ----- 820 x 500 x 290 mm INCLUDING * Digital depth stop * CE hood * Laser device * LED illumination * CE emergency stop * Drill head with MK2 adaptor * Drive key Dodpfx Acsk Iuzisxoup

Year of construction: 1955, condition: used, used manufactured by IMA type B55 built in 1955 Masch.-No. 0/650 pressing cylinder pneumatic 4 Dusdpfx Asvwf Szecxep table 2900x1300 mm working height 750 mm max. material thickness ca. 200 mm located in 97447 Gerolzhofen, free on truck, unpacked sale in current condition as seen without guarantee and warranty

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3000x800x2100 mm Weight 1250 kg Total power requirement 0 kw Duedsvz Hxwjpfx Acxep

Condition: new, Year of construction: 2022, Estimated Equipment Weight 3500 Kg Equipment Dimensions (front x depth x height) (Ca. Aussenmasse) 1354 x 2005 x 2595 mm Table Dimensions (Useful Area) front x depth (Tischgroesse) Ø1050 mm Opening between table and hammer (Daylight) 350 mm Hammer stroke (Stoessel-Verfahrweg) 300 mm Drive power (Leistung in KW) 14,24 Kw Motor Rotation 1500,00 RPM Pump Flow 44,50 LPM Pump Motor Ratio 27,59 cm³/Rot Working Force (Zylinderleistung) 100,00 Ton Return Force (Rückzugskraft) 10 Ton Forward Speed 250 mm/s Working Speed with Pressure (Arbeitsgeschwindigkeit) 3~15 mm/s Return speed (Hebegeschwindigkeit) 150 mm/s Working Pressure (Maximaler Arbeitsdruck) 210,00 Bar Cylinder quantity 2 pc Stem Diameter 41,76 mm Cylinder Diameter 250,97 mm Cylinder stroke (Stoessel-Verfahrweg) 300,00 mm Reservoir Capacity (Volumen des Oeltanks) 350,00 Liters Extractor Cylinder 5,00 T Cylinder travel (Stoessel-Verfahrweg) 150,00 mm Dedpfshmi T Uox Acxsup

Condition: used, Size: 3,000 mm x 1,200 mm Dusdpsd Hwwujfx Acxep -no attacks -without pressing cylinders

Condition: ready for operation (used), Year of construction: 1992, operating hours: 5,000 h, functionality: fully functional, total width: 1,400 mm, total length: 3,200 mm, total height: 2,900 mm, overall weight: 23,000 kg, temperature: 210 °C, pressing force: 200 t, operating temperature: 200 °C, workpiece height (max.): 150 mm, table width: 1,400 mm, table length: 3,200 mm, You can view the machine under power until mid-July 2025. For sale is an almost as-new veneer press with infeed/outfeed table from the German manufacturer Wemhöner, model KTV1E (serial number 1645, year of construction 1992). The machine is in excellent condition and has only low usage hours. Dodpfxswnpcdo Acxjup Machine type: Throughfeed press Manufacturer: Wemhöner Type: KTV1E Serial number: 1645 Selecta Year of construction: 1992 Location: 57223 Kreuztal Available: immediately Technical data Press length: 3200 mm Press width: 1400 mm Heating plates: yes Heating medium: oil Loading: yes Infeed belt: 3200 x 1900 mm Outfeed belt: 3200 x 1900 mm Press area: 3200 x 1450 mm Passage height: approx. 100 mm Feed temperature: 200° Thermal output: 45 kW Heating medium: oil Press force: 200 tons The press machine is in top condition, has had very low usage, and has been used exclusively for development projects for the past 15 years. I will gladly send you further information and pictures on request. The machine is immediately available and can be viewed by arrangement at any time. Pick-up only! Function video on request. If interested, I am happy to provide further information or arrange a viewing!

Condition: new, Year of construction: 2022, bending press 10 ton with welding table - motor 1 KW - 400 Volt 50 Hz 3 phase Dujdopz Hztspfx Acxsp - with punch and die - bending high 150 mm - with welding table - 1000 x 1000 mm - moveable on wheels - welding table without accories

Condition: good (used), TABLE PRESS WITH POWER UNIT Duodpfxsk Adfne Acxop

Condition: new, Year of construction: 2026, total width: 1,500 mm, total length: 2,500 mm, total height: 3,200 mm, Rotary tablet press SPT- TP600 2-shift production; Touch screen, PLC control panel; HMI (Human Machine Interface); SPT-TP 600 Number of stations (max.) 16 stations 1 Max. tablet ejection 3000 - 18000 T/h Dujdpfsuac Sfex Acxep 2 Max. tablet diameter round mm 50 3 Max. Tablet thickness mm 15 4 Max. Main pressing force t 30 6 Dimensions mm 1500 x 2500 x 3200

Year of construction: 2026, condition: new, Rotary Tablet Press SPT-TP 400 with high speed production capacity. High speed production capacity; According to GMP Regulations; Touch screen, PLC control platform; HMI system; SPT-TP 400 Djdpody Dzrsfx Acxeup Number of station (max.) D=30 B=36 BB=45 1 Max.Tablet output tab/h 125000 170 000 215 000 2 Max.Tablet dia. Round mm 13 16 25 Shaped mm 14 19 25 3 Max. tablet Thickness mm 8,5 4 Max. main compression force Ton 10 5 Max. Pre compression force Ton 2 6 Machine Dimension mm 1000 x 1230 x 2000

Year of construction: 2026, condition: new, Rotary Tablet Press SPT- TP 500 D with double sided press with 2 layer production. Double sided press; 2 Layer production; According to GMP regulations; Touch screen, PLC control plarform; Dedpfx Ajdy Dz Aocxoup HMI system; SPT-TP 500D Number of station (max.) D=41 B=49 BB=59 1 Max.Tablet output(double sided) tab/h 270 000 360 000 420 000 Max.Tablet output 2 layer tab/h 90 000 115 000 140 000 2 Max.Tablet dia. Round mm 13 16 25 Shaped 14 19 25 3 Max. tablet Thickness mm 8,5 4 Max. main compression force Ton 10 6 Machine Dimension mm 1150 x 1550 x 1950

Year of construction: 2026, condition: new, Rotary tablet press SPT-TPL200 is the small rotary press for R&D and small scale production. According to GMP regulations; Touch screen, PLC control platform; HMI system; Description SPT-TPL 200 Number of station (max.) D=13 B=16 BB=19 Dusdpfxsdy Dzie Acxjp 1 Max.Tablet output tab/h 46 000 57 000 68 000 2 Max.Tablet dia. Round mm 25 16 13 Shaped mm 25 19 14 3 Max. tablet Thickness mm 8,5 4 Max. main compression force Ton 5 5 Max. Pre compression force Ton 1 6 Machine Dimension mm 600 x 1106 x 1705

Condition: excellent (used), Manesty D3B tablet press Manesty 16 station tablet press, up to 500 tablets per min, max tablet diameter 25mm, max depth to fill 20mm, 3Ph Dedpfx Acoiy Nn Iexeup

Condition: like new (used), Manesty D3B tablet press Dedpfxsiy Nnys Acxjup Serial: 24D117 Manesty 16 station tablet press, up to 500 tablets per min, max tablet diameter 25mm, max depth to fill 20mm, 3Ph

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, Single-Punch Tablet Press Model CPR1 The CPR 1 benchtop press is a single-punch machine designed for tablet production. Powder is loaded into a hopper and directed through a stainless steel tube into the die cavity. The adjustable punch compresses the powder, and the finished tablet is ejected from the machine. Dsdpfjykukqjx Acxjup The press operates with a continuous motion utilizing cam disks. An operator panel equipped with a tablet counter is included. The machine is capable of producing up to 3,000 tablets per hour. The tablet press can be fitted with tooling for round, oblong, or oval tablets. Punch and die changes can be carried out simply and quickly. All product-contact parts are made of AISI 316 stainless steel. Technical Data Machine dimensions CPR1: 350 x 500 x 720 mm Net weight CPR1: 80 kg Electrical connection: 1 Ph. 230 V. 50 Hz Electrical power: 1.20 kW Tablet output: max. 3,000 tabs/h Tablet size range: 4–20 mm

Condition: used, Year of construction: 2003, Manufacturer: IMA Kilian Model : E150 plus Version : 26-EU-B Year: 2003 Number of stations: 26 Die type: B Punch type: EU-B / IPT-B Punch configuration : die diameter: 30.16 mm height of dies: 22.22 mm max tablet diameter: 16 mm max filling: 15 mm max main compression: 80 kN max precompression: 23 kN Production rate: 7,800 – 160,000 tablets / h Technical documentation available Dsdpfx Ajx R A Ulecxoup Weight: 1500kg  

Condition: used, Year of construction: 1985, Perfecta 1000 rotary tablet press with electrical cabinet   Manufacturer: Fette Dodpfxox R Awmj Acxjup Model: Perfecta 1000 / P1000 Year : 1985 Number of pressing stations: 22 Maximum compression force: 80 kN Maximum pre-compression force: 20 kN Maximum tablet diameter: 25 mm Maximum tablet thickness: 10.5 mm Maximum hourly throughput: 72,600 tablets Maximum filling height: 22 mm Pitch diameter: 315 mm Die plate speed: 15-55 rpm Punch shape: EU 1 Die diameter: 38.1 mm Die height: 23.8 mm Punch body diameter: 25.4 mm Upper punch length: 133.6 mm Length of lower punches: 133.6 mm Depth of punch insertion into die: 2 – 6 mm Machine footprint: 1030 x 1090 mm Net weight: 1800 kg Documentation available