Manufacturer: Steinert
Type: NES 150 220 E 50095
Ceabdlz3v7
Belt widthness: 1.500 mm (New belt)
Included:
– New Control-unit
Eddy Current Separator is overhauled, sandblasted and painted.
Rising conveyor belt / angle conveyor belt, articulated conveyor belt incl. magnetic separator overband magnetic separator magnetic tape
Rising conveyor belt + overbelt magnetic separator Complete solution for wood chip producers
Aluminum angled conveyor belt with substructure
including adjustable feet and machine feet for levelling
horizontal range: 3,000mm
Dv3heu
Rising range: 2,000mm
Angle in the bend area: 45°
Total conveyor length: 4,400mm
Discharge height: 1,600mm
Height of horizontal:...
Drum magnet built into housing
Magnetic: Ferrit or Neodym
NEW MACHINES
Drum-diameter: 300mm
Drum-length: 400mm
3s9wy28g
Drivers: 4x 10mm.
Drive-motor: 0.25kW / 400V / 50Hz.
Rotation: 30RPM.
Housing completely made of stainless steel
with upper and lower section: 1inlet / 2 outlet
with material limit slider on the Inlet. Front-side removable.
For sale is a magnetic separator from the processing of ferrous slags. Consisting of a feed hopper for wheel loader feeding, a conveyor belt to the overbelt magnet, a dump discharge belt for the inert fraction and a sieve to screen out fines from the magnetic fraction. The machine has been used for years to separate ferrous slag from iron without difficulty. After the process, three fractions are produced (dew mineral, fine iron and coarse iron). The machine is located in Dortmund. A potential b...
Type: Core 1000E Twin Pole
Length: 2450 mm
Width: 1225 mm with electric drive, 1410 mm with hydraulic drive
Height: 448 mm
Weight: 1375 kg in the Twin Pole version
2meyfiu2
optionally with hydraulic or electric drive or with both drive versions for one separator
Other versions on request
ex stock D-28832 Achim
Immediately available!
Manufacturer: Steinert
Type: NE 100 220 E 50094
Chfx7eg8hh
Belt widthness: 1.000 mm (New belt)
Included:
- Feeder with frame (L x W: 1.650 x 950 mm. / 2 Pcs. JV 134-90 Unbalance motors 0,8kW/4)
– New control-unit
Eddy current separator is overhauled, sandblasted and painted.
Diameter: 160mm
Also available in the diameters: 180, 200, 250, 300 mm for an additional charge, other diameters on request.
Vi2zo
Very stable industrial design.
Ideal for separating nails/metal parts from material flows.
For example after a wood shredder.
including 3 extremely powerful magnets
* If desired, up to 6 magnets can be installed in the component - surcharge for each additional magnet + 49 €
- Neodymium magnets are also available instead of ferrite for an additional charge
Your adv...
Permanent overbelt magnetic separator TYPE PM1200
Manufacturer: the magnet professionals
Bdvd8el7df
L x W x H: 1200 x 550 x 200mm
Magnetic L: 700mm W: 250mm
Gear motor: 0.37KW
Inner bearing lubrication for 10,000 operating hours.
Protection class: IP-55
Suitable for cable diameter 1-38 mm. 8 rolling blades made of HSS steel.
Technical Parameters:
Fk7q8g0mw
Speed of cutting: 20 m/min
Electric engine power performance: 375 W
Voltage: 220 V
Processable cable diameter:1-38 mm
Dimensions:
lenght: 600 mm
height: 400 mm
widht: 400 mm
weight: 35 kg
1 year guarantee.
Maximum Cable Diameter : Ø 90mm
Minimum Cable Diameter : Ø 5mm
Cutting Speed : 10 m / min
Electric Motor Power : 4 kW
Machine Dimensions : 70cm x 131,5cm x 119cm
Machine Weight : 460 kg
Cpkcxjce
MİZAR S series are designed to strip and remove the outer covering material of any cable exposing the internal material. MİZAR cable stripper machine can easily strip and remove the outer covering material of any size cable. Including: Steel Wired Armoured cables (SWA), double steel wired armoured cables, steel tapes, PVC covered cables, lead covered cables, thick rubber covered cables, nylon covered cables, low-grade cables, TT cables and more provide excellent performance. Rotors feed with hyd...
Manufacturer: Steinert
Fn788l9
Type: UME 155 160 P
Magnet L x W: 1.600 x 1.550mm (100% ED Magnet)
AA.: Ca. 2.700 mm
Belt widthness: 1.600 mm (New)
151V. DC. / 62,4 A.
Weight: 9.400 Kg
With new Transformer-rectifier of 380V. Primary.
UNUSED
Manufacturer: Bakker Magnetics
Type: BRS 26.181
Serial No.: 11380502
Weight: 360 KG
Max air pressure: 6 Bar
Included:
– Frame
Cgalfoej2u
– Air control unit
Permanent overband magnetic separator
TYPE PEM2200
2200 x 1000 x 400mm
=====
4x eyebolt for suspension
Rubber band GB30
Hvmpkjx
Magnetic dimensions: 1200x500mm
Magnetic filter grid in housing / cabinet construction V2A quality
F0q0aatsa
(for free-fall applications to investigate dry and free-flowing bulk solids)
Magnetic grid 200x200mm
High-quality cabinet construction completely closed
Easy cleaning by pulling out the magnetic cores
High quality magnetic filter rods completely closed
Magnet NdFeB N45, Br 8500 Gauss Tmax 80 ° C
4x M10 threaded rod incl. Wing nut as clamping unit
Guide rod center:
Entrance level right
Outlet below
For sale is a magnetic filter system with integrated cleaning system.
Filter systems of this type are usually made individually to order from customers.
In this system, there is an exhibition purpose, which only served to show, and was hardly in use.
product benefits
Installation possible into existing production lines
Separation of any ferrous metal contaminants
Very corrosion resistant
High wear resistance
Compact design
Low maintenance
Ypr3xjc0b
Technical details
- 400 x 400 ...
Power: 7,8 kW.
Amperage: 52 A.
Voltage: 150 V.
100% ED Magnet L x W: 1.780 x 1.380 mm.
Conveyor belt: 1.400 mm.
AA. : Ca. 2.800 mm.
Bypcxs0p0k
With transformer rectifier of 380V. primary.
Overband separator will be overhauled, sandblasted, painted.
“Wagner 451-130/160-600” for Sale
With transformer from 380 V. AC to 220 V. DC.
Manufacturer: Wagner
Type: 451-130/160-600
Power: 10,9/7,2 KW.
Amperage: 49,3/32,5 A.
O0xgf
Voltage: 220V.DC
Magnet L x W: 1.600 x 1.300 mm.
Conveyor belt: 1.400 mm.
AA. : 2.530 mm.
Dimensions: 250x250x80mm
Filter systems are used for the thorough separation of finest ferrous metal contaminants.
Examination of shoe goods
Universally applicable in pipe systems, funnels & slides
Easy handling and cleaning
Permanent magnetic filter grids can be manufactured in round, rectangular or square design.
Ferrous particles are reliably filtered out of the ware as they pass through the grates.
In addition, this design provides easy cleaning of the stave.
The filter system can be re...
Permanent overband magnetic separator
TYPE PEM1600
1600 x 1000 x 400mm
=====
4x eyebolt for suspension
Rubber band GB30
Hpxi9ne
Magnetic dimensions: 600x500mm
Permanent overbelt magnetic separator TYPE PM1200
Manufacturer: the magnet professionals
Bdvdr7lwn3
L x W x H: 1200 x 550 x 200mm
Magnetic L: 700mm W: 250mm
Gear motor: 0.22KW
Inner bearing lubrication for 10,000 operating hours.
Protection class: IP-55
Magnetic tape, overbelt magnetic separator, magnetic filter, lifting magnet, overbelt magnet
Permanent overbelt magnetic separator
TYPE PEM2200
2200x1000x400mm
=====
4x ring screw for suspension
Magnet dimensions: 1200x500x180mm
PU conveyor belt with hard cover, matt black
Inner bearing lubrication for 10,000 operating hours.
Degree of protection: IP-65
Three-phase gear motor GEMOTEG 1.1KW
Cladding: RAL 5015
Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic sep...
Magnetic tape, overbelt magnetic separator, magnetic filter, lifting magnet, overbelt magnet
Permanent overbelt magnetic separator
TYPE PEM1600
1600x1000x400mm
=====
4x ring screw for suspension
Magnet dimensions: 600x500x180mm
PU conveyor belt with hard cover, matt black
Inner bearing lubrication for 10,000 operating hours.
B8dgy2s9lh
Degree of protection: IP-65
Three-phase gear motor GEMOTEG 1.1KW
Cladding: RAL 5015
Conveyor belt, conveyor belt system, discharge belts, belt conveyor, ma...
Complete solution for the transport of bulk materials and demetalization of magnetic metal contaminants.
Aluminum angled conveyor belt including substructure
horizontal area 2000mm (adjustable)
Rising range 4500mm (customizable)
Freely selectable angle in the bend: 30, 35, 40 or 45 °
Construction: height adjustable
Construction for suspending the overband magnetic separator DMPM1200 included
Conveyor belt width 400mm (adjustable)
We deliver our conveyor belts in PVC, PU or rubber.
PVC conveyo...
Permanent overband magnetic separator
TYPE PEM1400
1400 x 700 x 400mm
=====
4x eyebolt for suspension
GB30 elastic band
Magnet dimensions: 600x340x180mm
Inner bearing lubrication for 10,000 operating hours
Degree of protection: IP-65
Three-phase gear motor GEMOTEG
Covering: RAL 5015
Magnetic core set in soft iron, so that a
very high permeability can be guaranteed.
Underbody tightly closed and sealed with stainless steel plate and pole pieces.
2 demonstration systems immediately available fro...
Overband plate magnet from remaining stock / overproduction
Bivrsqo23z
Version in VA 1.4301 tightly sealed
For sale is a plate magnet with threaded holes on the back.
The magnet can be mounted either as a "police magnet" or also for filtering out metal impurities above a conveyor belt.
Ring eyelets for suspension are supplied.
Magnet block dimensions:
620 x 420 x 250mm
Only 1 piece available at short notice.
Many other dimensions available from stock.
Overband plate magnet from remaining stock / overproduction
Version in VA 1.4301 tightly sealed
For sale is a plate magnet with threaded holes on the back.
The magnet can be mounted either as a "police magnet" or also for filtering out metal impurities above a conveyor belt.
Ring eyelets for suspension are supplied.
Dimensions of the magnet block:
2ruuy3
600 x 500 x 180mm
Only 2 pieces available at short notice.
Many other dimensions available from stock.
Overband plate magnet from remaining stock / overproduction
Version in VA 1.4301 tightly sealed
For sale is a plate magnet with threaded holes on the back.
The magnet can be mounted either as a "police magnet" or also for filtering out metal impurities above a conveyor belt.
Ring eyelets for suspension are supplied.
Dimensions of the magnet block:
Nzu32
800 x 500 x 180mm
Only 1 piece available at short notice.
Many other dimensions available from stock.
Permanent overband magnetic separator
TYPE PEM2000
Ni0rv
2000 x 1000 x 400mm
=====
4x eyebolt for suspension
Rubber band GB30
Magnetic dimensions: 1000x500mm
Overband plate magnet with cleaning mechanism
execution in VA 1.4301 tight welded
incl. drawer for cleaning
dimensions:
800x500x180mm
4 - pieces M16 eyebolts on the backside
These two lifting magnets were used by one of our customers as "police magnet" in the meat processing industry.
Both overband magnets are in a perfect condition.
The mentioned price refers to 1 piece.
Currently still 2 pieces available from stock!
All information without guarantee, only while stocks last!
conveyor belt, con...
Plate magnet in NdFeB Neodymium version
3bgeud2pi
260 x 104 x 41.5mm
Completely welded housing
4 tapped holes M8x20mm
Edge distance: 40mm
-BHmax: 263-279 kJ / m³
Br: 1170-1210, JHc:> 955KA / m
Maximum operating temperature: 80 ° C
This is an overproduction which has not been accepted by the customer. More than 10 pcs.
We make the search easier for you
You will receive new offers immediately and free of charge via e-mail
You can easily terminate the search request at any time
10 valuable tricks for buying used machines online
Sample sales contract for used machines in nine languages
Photo gallery: the 10 strongest forklift trucks in the world
Photo gallery: The World's 10 biggest excavators
Machineseeker still biggest sponsors of 2nd German football league
Morlock Motors official partner of Machineseeker and Truckscout24
Machineseeker Trust Seal
What is the Trust Seal?
The Machineseeker Trust Seal enables buyers to quickly recognize whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Verification of the dealer's postal address
Validation of the banking details
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal awarded to you in your listings on Machineseeker. In this way, you signal to any potential buyer the independently verified seriousness of your company. This creates buyer confidence and increases the likelihood of successfully selling machines. In addition, you have the option of including the Maschinensucher seal of confidence on your homepage and letterhead.