Condition: ready for operation (used), Year of construction: 2010, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2010 Pressing force: 532 kN Voltage: 400 V Maximum bale weight: up to 550 kg (depending on material) Iedpfxexz Dwtj Aa Eobf Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening dimensions: 19.5 x 65 x 111.5 cm Condition: very good! Functionality checked. FLITS Rental & Sales service: with every machine we include a bundle of baling wire (120 wires). Do you require additional bundles of baling wire? Please request a complimentary quote. At FLITS Rental & Sales, you choose speed, transparency, and reliability. We think along with you, respond immediately, and ensure you quickly receive the right machine. You are very welcome to view the machines at our premises. We are located at Schoterlandseweg 94, 8413NE Oudehorne. Visits are by appointment, so we can take the time to advise you thoroughly and present the most suitable machines. We are happy to assist you! Waste baler Paper baler Cardboard baler Plastic baler Waste compactor Recycling Textile baler Waste processing

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, pressing force: 26 t, Baler ORWAK Compactor 3325 Pressing force: 26 tonnes / 260 kN Year of manufacture: 2023 Very good condition! Ibsdpfx Aaox Hfi Rs Eof

Condition: good (used), Welger Type: RC 660 Roller compactor with Brück suction Compact and fully automatic Used exclusively for producing pressed bales from low-density packaging materials. Application variants Press materials Paper edge trimming (strips and endless) Paper and film bags PP film edge trimming Film strips Clothing protection film (PP/PE films) PP/PE fiber material Insulating and nonwovens Foam mesh Packaging foam Tetrapak Length 2100mm, width 940mm, height 1755mm Dimensions of filling shaft 330 mm x 600 mm Bale format max. 400 mm x 600 mm Bale weight 20 - 30 kg depending on the material being pressed Press density 250 - 400 kg/m³ depending on the material being pressed Throughput daily output 30 bales / day Feed speed 0.36 m/s RC 660 3X 400V 50Hz 16A 2.2 kW 5.0A 700 kg Brück extraction Series: KFA Size: 60-30-3000 Air output: 6,000 m³/h Motor output: 0.3 kW Filter area: 30 m² Iodedtxbiepfx Aa Eobf Negative pressure: 3,100 Pa Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: good (used), Waste compactor, waste compactor, compactor container, waste container, self-compacting container, waste compactor, paper compactor container, paper container, cabinet compactor, vertical baler -Manufacturer: DIXI, Cabinet baler, vertical baler -Type: 15 S Ibedpfoxwuilex Aa Eof -Drive power: 4 kW -Pressure pressure: t -Interior dimensions 1100x690x1370 mm -Transport dimensions: 1540/950/H1970 mm -Weight: 834 kg

Condition: excellent (used), Year of construction: 2021, operating hours: 4,975 h, functionality: fully functional, type of input current: three-phase, transport height: 1,894 mm, The Bergmann PS1400 is an intelligent compaction station, also known as a mini compactor, offering an alternative to traditional baling presses. Instead of compressing recyclable materials into bales, the PS1400-E compacts recyclables directly into a large plastic bag (approximately 1,400 liters) placed on a pallet. This system is ideal for environments with a continuous flow of recyclable material, such as distribution centers, supermarkets, or production facilities dealing with large volumes of packaging waste. Ibjdpfx Aaoxyq Ayj Esf As the machine utilizes a rotating compaction roller instead of an up-and-down compaction plate, the PS1400-E can process continuous streams of recyclables without having to pause for separate press cycles. You simply throw cardboard, plastic film, residual waste or other materials into the machine’s hopper. A powerful steel roller equipped with cutters grabs the material, shreds it, and compresses it down into the bag below. Continuous loading is possible – the feed opening can remain open while the roller turns, ensuring there is no waiting time. This continuous loading capability significantly increases processing speed compared to, for example, a baler (where you need to wait for the press cycle to finish and the door to reopen each time). The PS1400 is user-friendly: it features a simple start/stop button or can even operate fully automatically (on some models it starts when recyclable material is detected). Since recyclable material is neatly compacted into a sturdy PE bag, you are left with a compact “block” of recyclables on a pallet at the end. This package can be easily sealed and moved with a pallet truck or forklift. A major benefit is that the packed waste bales are clean and leak-proof, which allows you to transport them together with goods without risk of contamination. This is especially convenient in supermarkets or production facilities: the compacted waste bags can be sent back on delivery trucks, helping to avoid empty return trips. With the PS1400, you not only save storage space (up to 80% reduced waste volume is achievable, depending on the material), but also labor time. Staff need to make fewer trips to the waste container, and do not have to strap or lift bales—the waste bag is only replaced when it is full, which takes much longer. The machine is safe (equipped with emergency stop and secured access) and, thanks to its electric drive, operates relatively quietly. Maintenance is minimal: the rotating compaction roller is self-cleaning and the hydraulic system is robustly engineered. In summary, the PS1400-E provides a modern, efficient way to compact recyclables directly at the source into manageable packages, delivering significant logistic and cost advantages.

Condition: good (used), Year of construction: 2006, operating hours: 1,522 h, Manufacturer: Husmann Typ: SPB 22 SEN-E Build in: 2006 Volume: 22m3 Ibjdpfx Ajxbpr Asa Esf Back door: top hingend Lifting system: hook at the front

Condition: ready for operation (used), Year of construction: 2010, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2010 Isdpfxoxy Iyce Aa Eobf Pressing force: 532 kN Voltage: 400 V Maximum bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening dimensions: 19.5 x 65 x 111.5 cm Condition: very good! Functionality checked. FLITS Rental & Sales service: with every machine we include a bundle of baling wire (120 wires). Do you require additional bundles of baling wire? Please request a complimentary quote. At FLITS Rental & Sales, you choose speed, transparency, and reliability. We think along with you, respond immediately, and ensure you quickly receive the right machine. You are very welcome to view the machines at our premises. We are located at Schoterlandseweg 94, 8413NE Oudehorne. Visits are by appointment, so we can take the time to advise you thoroughly and present the most suitable machines. We are happy to assist you! Waste baler Paper baler Cardboard baler Plastic baler Waste compactor Recycling Textile baler Waste processing

Condition: excellent (used), Year of construction: 2011, operating hours: 2,750 h, functionality: fully functional, overall weight: 24,500 kg, Mobile car and mixed scrap baler. With crane and cabin. Only 2750 operating hours. Ibodpfjuu Um Eox Aa Eof

Condition: repair required (used), Year of construction: 2009, functionality: limited functionality, machine/vehicle number: 39906, We are offering our Husmann body for hooklift vehicles for sale, which we have used to start handling the disposal of front loader containers. Basically, we fully refurbished and repaired it two years ago. However, there is currently an issue with the flap sensors, so the body is in need of some repairs. This should not be a major repair. With this body, you can tip 1.1 cbm, 2.5 cbm, and 5.0 cbm front loader containers (depending on manufacturer and weight). Isdpfxjxz Thns Aa Eobf Since we have now acquired a refuse collection vehicle, the body is up for sale.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Used Andritz Paladin 600B Incl. combined stainless steel feed screw and mixer, 2x 55kW motors, other motors upon request Automatic roller adjustment Ijdpfx Ajxtvd Asa Ejbf Internal components inspected 2 years ago Incl. frame for roller and die change

Condition: good (used), Year of construction: 2001, Garbage compactor, garbage press, press container, garbage container, self-compacting compactor, waste press, paper press container, paper container, cabinet press, vertical baler Iodpfx Aoxg Dp Tea Ejbf -Manufacturer: Husmann, cabinet press vertical baler -Type: KBP 20 -Drive power: 3 kW -Pressure: 20 t -Filling opening: W x H 1250 x 680 mm -Bale ejection device: bale dimensions 1200x950x850 mm -Transport dimensions: 1450/1160/H2980 mm -Weight: 1300 kg

Condition: used, Year of construction: 2013, functionality: fully functional, total width: 860 mm, total height: 1,800 mm, total length: 3,100 mm, briquette diameter: 65 mm, overall weight: 3,800 kg, We are selling our used briquetting press from the manufacturer Mütek, as shown in the photos. Model: MAP 750 Year of manufacture: 2013 Diameter: 65 mm Main motor power: 37 kW Feed auger gear motor: 2.2 kW Compactor auger: 5.5 kW Hydraulic pump motor: 0.37 kW Total connected load: approx. 47 kW Siemens PLC S7/300 controller with operating hours counter in the control cabinet Machine has CE marking Automatic start-stop function Dimensions: 3100 x 860 x 1800 mm (LxWxH) Weight: 3,800 kg Included accessories: - Storage silo above the machine (6 m³) - Briquette channel extension without gate (2 m with stand) - Temperature control unit - Cutting device (trims briquettes to equal length) - Cyclone for material injection, incl. frame - Rotary valve Ibedpfsxxyy Esx Aa Eef The machine is still installed and operational, so a functional test on site is of course possible. Net price: €90,000. Gross: €107,100. VAT can be stated separately.

Condition: excellent (used), Year of construction: 2017, operating hours: 19,187 h, functionality: fully functional, pressing force: 140 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,500 kg, overall weight: 52,000 kg, Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 140 Year of construction 2017 Working hours 19,187 hours, stand October 2025 Press power main press 140 tons (max. 153,5 tons) Press power of pre-press 70 tons Feed channel 1,600 x 1,100 mm Capacity per cycle time 4,34 m³ Theoretic cycle time 16 sec. Bale size 1,100 x 1,100 mm Driving motor 2 x 75 kW Connected load 226 kW Full load current 428 A Tying system 5-fold vertical, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx. 30 tons/h bulk weight of 50 kg/cbm approx. 46 tons/h bulk weight of 100 kg/cbm approx. 82 tons/h Bale weight 800 up to 1300 kg, depends on material and bale lenght SPS controller (manuf., type) Telemecanique TSX Micro Operating panel (manuf., type) Schneider MAGELIS Touch Baler dimensions built up with hopper 13,200 x 27,000 x 7,344 mm (l x w x h) Transport dimensions only baler 13.200 x 2.750 x 3.450 mm (l x w x h) Machine weight baler approx. 52 tons Technical data chain belt conveyor: Manufacturer Bollegraaf Typ HBT 1216 Year of construction 2009 Driving motor 7,5 kW Length feeding conveyor 6,750 mm Iedpfxsxrta Ee Aa Eebf Length elevating conveyor 14,400 mm Length goose neck 2,150 mm Grade 30° Effecting width 1,754 mm Height of side wall feeding conv. 500 mm Height of side wall elevating conv. 800 mm Weight 16 t Pit dimensions 10,000 x 3,200 x 1,200 mm (l x w x d) Comments: The press is currently in operation and is to be replaced by a new machine in the 2nd quarter of 2026. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 2012, pressing force: 40 t, Manufacturer: HSM Ijdpjx H R U Sofx Aa Eobf Model: HL 4010 Li Year of manufacture: 2012 Pressing force: 40 t

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 7412, power: 15 kW (20.39 HP), Presto SPS15 - Screw press Refurbished in 2019 Ijdpfxswcd Htj Aa Eebf Used for cardboard Complete set including container, aggregate and hopper Automatic grease lubrication

Year of construction: 2001, condition: good (used), HSM-500.1_VL PRESS PAPER PRESS FILM PRESS BALER ready to use good CONDITION used & good / see photos model: HSM 500.1 VL machine no. 6135.244.P serial no. 220109689 pressing pressure 50 tons V 400; Hz 50 KW 7,5 Amp. 15,5 Pressing force 6 tons Year of manufacture 2001 more presses in our other offers article used and good / roughly cleaned (plug in and go ) dimensions: on request !!! Other photos are for further use possibility. All items seen in photos also available from us. Price quotation net per piece for pickup from stock 47441 Moers Isdpfjlc Du Nsx Aa Esbf current stock 1 piece Viewing is expressly offered. more technology in stock see photos or ask by phone General: We offer here from various acquisitions articles, which we describe as well as possible, as well as set meaningful photos. Further details about the article can not be made. We offer the possibility of Tuesday and Thursday in the time between 9 and 16 o'clock after telephone appointment to visit. If necessary, the article can be taken away immediately. Answers to this article we can offer due to time constraints only if you provide us with a phone number when you request. This offer, unless specifically described, is USED GOODS. Any packaging may be damaged. Items have been visually inspected and are as far as technically ok. All offers ex stock 47441 Moers. If you want shipping, please contact us to discuss packaging and shipping costs. Call with interest gladly by. all dimensions are approximate Errors in the description expressly reserved.

Condition: good (used), Year of construction: 1992, Roller compactor, packing station, garbage compactor, garbage press, press container, garbage container, self-compactor, waste compactor, paper compactor, paper container, cabinet press, vertical baler, cardboard reducer, paper baler, rotating waste compactor -Manufacturer: Bergmann, paper baling press -Type: PS 8100-38 -Waste compactor: with rotating compaction unit -Advantage: It can be filled continuously -Drive power: 2.02 kW Iodpfjxrpi Aex Aa Eebf -Filling opening: 1190/990/H670 mm -Bale volume: 1 m³ -Transport dimensions: 1600/1200/H2200 mm -Weight: 898 kg

Condition: excellent (used), Year of construction: 2007, operating hours: 15,000 h, functionality: fully functional, machine/vehicle number: LP80VHK1, pressing force: 78 t, filling opening width: 750 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 25,000 kg, transport height: 2,500 mm, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), Equipment: documentation/manual, Technical data press: Manufacturer Presona AB Type: LP80VHK1 Year of manufacture: 2007 Pressure force main press 78.5 t Specific pressure force 95 N/cm² Pressure force pre-press 28 t Ibjdpfexw H Iyex Aa Eef Press chamber volume 2.7 m³ Dimensions of feed chute 1,500 x 1,100 mm Theoretical throughput 930 m³/hour Throughput under operating conditions 410 m³/hour Bale dimensions 750 x 1,100 mm Drive power 55 kW Binding 5-fold vertical, fully automatic Throughput capacity at a bulk density of density 30 kg/m³ approx. 9 to 12 tonnes/hour, density 50 kg/m³ approx. 14 to 17 tonnes/hour, density -100 kg/m³ approx. 16 to 25 tonnes/hour,g Throughput capacity for MSW (municipal solid waste) approx. 20 to 27 t/hour, depending on material Bale weights 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume 1,000 L Press dimensions with hopper 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions excluding press 10,985 x 2,300 x 2,900 mm Machine weight of press approx. 24 t Loading device Guide device for bales from the chute to the floor Fully automatic strapping device with 5 rows of strapping wire Wire guides for feeding 10 spools weighing 500 kg. Hydraulic system with cartridge assembly Control system for 2 conveyor belts Press control system with PLC control Photocells for two-stage filling of the press chamber Time counter Bale counter Bale length measuring counter Technical documentation

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, pressing force: 12 t, bale length: 1,200 mm, bale width: 700 mm, bale height: 500 mm, bale weight: 450 kg, total length: 5,500 mm, Equipment: documentation/manual, The machine is in very good condition and regularly serviced. Manufactured in 1994, it was purchased from the original owner and is ready for use. The baler is started manually by a button or fully automatically using a photocell in the loading chute. Cutting blades mounted on the pressure plate cut the material and compress it in the baling channel. Once the desired length is reached (bale length adjustment is available), the bale is automatically tied after several baling cycles. The bale can be tied with wire, twine, or polypropylene tape. Automatic baling system with a 12-ton pressure for economical volume reduction of residual (recyclable) materials in industry and retail: Cardboard Tetra packs Films Foams PET bottles Insulation mats and other compressible materials. Baling pressure: 120 kN Bale size: 700 x 500 x 600 - 1200 mm Bale weight (depending on material): 280-450 kg Transport length: 5.5 m Weight: 3500 kg Drive power: 7.5 kW Iodpfx Asx Ihqasa Eebf Transport costs depend on weight, volume, and, above all, distance. The following information is important for inquiries: Delivery address (postal code and city name), but further details require a phone call. Therefore, please inquire about transport costs and other delivery methods by calling us.

Condition: excellent (used), Year of construction: 2017, operating hours: 13,284 h, functionality: fully functional, pressing force: 140 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,500 kg, oil tank capacity: 2,600 l, Technical data baler: Manufacturer Bollegraaf Type HBC 140 Year of construction 2017 Iodpexpxhvjfx Aa Eebf Working hours 13,284, as of October 2025 Press power main press 140 tons (max. 153,5 tons) Press power of pre-press 70 tons Feed channel 1,600 x 1,100 mm (l x w) Capacity per cycle time 4,34 cbm Theoretic cycle time 16 sec. Bale size 1,100 x 1,100 mm (w x h), length adjustable Driving motor 2 x 75 kW Connected load 209 kW Tying system 5-fold vertical, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx. 30 tons/h bulk weight of 50 kg/cbm approx. 46 tons/h bulk weight of 100 kg/cbm approx. 82 tons/h Bale weight 850 up to 1.500 kg Hydraulicoil 2.600 l Univis N46 Baler dimensions with conveyor built up with hopper approx.13,200 x 24,200 x 7,333 mm (l x w x h) Transport dimensions only baler approx.13,200 x 2,884 x 3,539 mm (l x w x h) Machine weight baler approx. 51,810 tons Technical data feeding and elevating conveyor with gooseneck: Manufacturer Bollegraaf Typ HBT 1216/1800 * 23,300 30°/15° Year of construction 2017 Driving motor 7,5 kW Length feeding conveyor 6,750 mm Length elevating conveyor 14,400 mm Length goose neck 2,150 mm Grade 30° Effecting width 1,754 mm Height of side wall feeding conv. 500 mm Height of side wall elevating conv. 800 mm Transport dimensions feeding conveyor with one segment elevating part 9,816 x 2,500 x 2,242 mm (l x w x h) Transport dimensions elevating conveyor with goose neck 13,472 x 2,800 (without motor) x 2,729 mm (l x w x h) Pit dimensions 10,000 x 3,200 x 1,200 mm (l x w x d) Condition: The press is in very good condition and ready for immediate operation. The conveyor belt chain needs replacing. The system will be in operation until December 2025. Scope of delivery: baler with conveyor belt, maintenance platform, access ladder, two wire feed stations for 5 wire reels each (without wire), and bale slider. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Pressing screw REG-MAC for drying films and fibers, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw Ijdpjxgtd Hsfx Aa Ejbf

Condition: good (used), Year of construction: 2009, COPEX 630 press-shear after repair and service Iodpfx Asq A S Egea Ejbf

Condition: good (used), Year of construction: 1996, Baler including conveyor, wire bins Manufacturer: Bollegraaf Typ: HBC 50A Build in: 1996 Baler weight: 19000 kg Weight conveyor: 6000 kg Engine: 30 kW Ibedpfxjxtmyze Aa Eef Vertical binding Number of wires: 5

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, pressing force: 70 t, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 600 kg, Equipment: documentation/manual, HSM HL 7009 Re/Li Horizontalballenpresse. Die Maschine befindet sich in sehr gutem Zustand und wird regelmäßig von einem autorisierten Servicecenter gewartet. Ibsdpfxex Ihpvs Aa Esf Diese Ballenpresse ist für größere Entsorgungsprojekte im Einzelhandel sowie in kleinen und mittleren Zentrallagern konzipiert. Die Ballen des Modells HL 7009 haben einen Querschnitt von 1100 x 1100 mm und können bei einer Ballenlänge von 1200 mm bis zu 600 kg wiegen. Dies gewährleistet eine optimale Ausnutzung der Nutzlast des LKWs. Presskraft: 700 kN Spezifische Presskraft: 58 N/cm² Antriebsleistung: 10,5 kW Spannung / Frequenz: 400 V / 50 Hz Leerlaufleistung (theor.): 42,97 m³/h Einfüllöffnung Breite x Länge: 890 x 1020 mm Ballen Breite x Höhe x Länge: 1100 x 1100 x 1200 mm Gesamtlänge x Breite x Höhe: 5366 x 2525 x 2559 mm Ballengewicht: 600 kg

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 60 t, input voltage: 400 V, bale weight: 550 kg, Used HSM V-Press 1160 Plus vertical press from 2015. The device is regularly serviced by an authorized service center. The press is fully functional and in very good technical and technical condition. Crushing force: 594 kN Voltage / required: 400 V / 50 Hz Width x height of the loading opening: 1195 x 650 mm Bale length x width x height: 1200 x 1100 x 1200 mm Width x height x height of the machine: 1780 x 1568 x 2985 mm Machine weight: 2403 kg Pressed material: foil, mixed paper, cardboard, cutting machine waste Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Ibodpfsx Ihmzox Aa Esf Our contact details can be found under the legal information of the seller. We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. We issue intra-community invoices - excluding VAT. Opening hours Mon-Fri: 8 a.m.-4 p.m. sat .: closed