Vertical baler

DIXI 15 S

Condition: used, Pillar drilling machines Hnedpfx Aob N Ezrefnoh

Condition: used, Year of construction: 1999, Technical details: bore capacity in steel (diameter): 32 mm throat: 293 mm bore stroke: 120 mm bore capacity in cast iron: Ø 38 mm spindle taper MT: MK 3 spindle throat: 293 mm spindle speed:: 160 - 2250 / seples U/min feed: 0,10 - 0,20 / manuell+automatisch mm/U Distance spindle/table max.: 55 - 642 mm table clamping surface:: 300 x 300 mm drill table adjustment: ja mm column diameter: 115 mm distance spindle center to floor plate:: 1207 mm total power requirement: 1,9 kW weight of the machine ca.: 280 kg dimension machine xH: 0,7 x 1,0 x 1,9 m Column drilling machine with infinitely variable speed adjustment and automatic feed. Hedpfeva Hmrex Afnonh Tapping with changeover switchEquipment: RÖHM 3 - 16 mm chuck, operation by foot switch left/right *

Condition: ready for operation (used), Hsm HL 4809 LI baler - Large filling opening, ideal for big boxes - Container tipper for convenient filling Pressing force in kN: 480 Hjdpfx Asra Dddjfnonh - Voltage/frequency: 3 x 400 V / 50 Hz - Bale weight in kg (depending on material): up to 400 kg - Bale dimensions (length x width x height in mm): 1200 x 1100 x 750 - Machine dimensions (length x width x height in mm): 5648 x 1849 x 2515 Idle cycle time in seconds: 53 - Manual tying: 4 times with wire

Condition: ready for operation (used), Technical specifications of Dixi 60 AUTOMAT baler Hsdpfxev Amw Nj Afnonh Filling opening (W x H): 1550 x 1000 mm Drive power: 31.5 kW Pressing force: 60 t Bale weight (depending on material): 350–600 kg Bale dimensions (W x H x D, adjustable): 1100 x 800 x 300–1600 mm Pressing/cycle time: 13/24 s Machine weight: 7000 kg

Condition: new, 6 St. range L-W-H 720 x 580 x 800 mm weight 100 kg Hnodpfx Ajvblibjfnjh 100Kg je Lade Stable tool cabinet with 6 drawers, lockable. 2 x 75, 4 x 100, 1 x 150 and 1 x 200mm Internal dimensions: 620x450 mm. Maximum load per drawer 100kg!!! Furnishings: 32x boxes 75 x75 mm. 16x boxes 75 x 150 mm. 8x boxes 150 x 150 mm. 12x dividers long 32x short dividers 1x stacking tray

Condition: new, Year of construction: 2026, Fully hydraulic lowering and raising function of the saw frame Hydraulic opening and closing of the vice Shutdown after cutting, return of the saw arm to its starting position Torsion-resistant saw frame made of cast steel (multi-ribbed) Hydraulic short-stroke cylinder for the vice Precision-ground carbide saw blade guides, adjustable Electric coolant pump Manual blade tension with display, including electric saw blade and cutting pressure monitoring Hydraulic vice (opening and closing) Revolving chip removal brush Large, solid round support table, rotating for miter cuts with a predefined cutting channel, manual miter adjustment, readout via scale 500 mm material stop with scale Including combi-toothed saw blade 4/6 Machine color: - Saw frame RAL 7035 - Machine body RAL 7005 Motor: 400 V three-phase, frequency-controlled, 1.5 kW Saw blade dimensions: 2910 x 27 x 0.9 mm Flywheel diameter: 325 mm Cutting speed: 20-120 m/min. Vice clamping width: 320 mm Working height: 760 mm Sawing range: at 0° = round diameter 250 mm, square 240 x 240 mm, rectangle 320 x 190 mm Machine dimensions (W x D x H) 1480 x 1700 x 2000 mm Weight: 420 kg Please inquire about additional accessories. Hnsdpfjcl Tc Aox Afneh DELIVERY: FREE (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: reconditioned (used), Year of construction: 2013, operating hours: 18,819 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,085 mm, filling opening length: 2,815 mm, bale length: 1,200 mm, bale width: 100 mm, bale height: 800 mm, bale weight: 400 kg, total width: 3,140 mm, total height: 2,900 mm, total length: 8,840 mm, overall weight: 7,380 kg, transport height: 2,900 mm, power: 9 kW (12.24 HP), year of last overhaul: 2023, transport width: 2,400 mm, transport length: 5,650 mm, Good day, We hereby offer you a used baler from the manufacturer Strautmann, type BaleTainer. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot accept any liability for correctness and completeness. Manufacturer Strautmann Type BaleTainer Year of construction 2013 Operating hours 18,819 hours Hnedpfxot H Rgfo Afneh Number of bales pressed 7,019 pieces Pressing force main press 60 tonnes Drive power 9.2 kW Machine weight press 7.38 tonnes The baler was partially overhauled. The piston rods and seal sets of the two main hydraulic cylinders were replaced and general maintenance work such as oil and filter changes etc. was carried out. Finally, after the overhaul work, the machine was tested. The press is equipped with a hydraulic tilting device for loading in order to empty lattice box containers on a truck ramp. For example, the machine can be positioned with the tilting device on a truck ramp. There, the employees can roll the material to the tipping device with a mesh trolley and then have it tipped hydraulically into the baler. The machine can also be loaded from the side via the large feed/storage container using a forklift truck or wheel loader. Conveyor belt loading would certainly also be feasible. The machine documentation is available in German. A viewing is possible by appointment in our workshop. We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: excellent (used), Collets Make Fahrion type FM 1145 55 pieces from 3 - 30,5 mm 3- 3,5 -4 -4,5 -5, 5,5- 6- 6,5- 7- 7,5 -8- 8,5 -9 -9,5 - 10- 10,5 -11 -11,5- 12 -12,5-13-13,5-14-14,5-15-15,5-16 - 16,5 17 - 17,5 - 18 - 18,5 - 19 ,-19,5 - 10 - 10,5 - 21 - 21,5 - 22 - 22,5 - 23 - 23,5 - 24 - 24,5 - 25 - 25,5 - 26- 26,5 -27 . 27,5- 28 - 28,5 - 29 - 29,5 - 30 - 30,5 mm Hnedpfxegzlm Ne Afnsh can also be sold individually Height 95 mm weight 17 , 5 kg

Condition: good (used), Year of construction: 2001, Garbage compactor, garbage press, press container, garbage container, self-compacting compactor, waste press, paper press container, paper container, cabinet press, vertical baler Hodpfxoxg Dp Te Afnsnh -Manufacturer: Husmann, cabinet press vertical baler -Type: KBP 20 -Drive power: 3 kW -Pressure: 20 t -Filling opening: W x H 1250 x 680 mm -Bale ejection device: bale dimensions 1200x950x850 mm -Transport dimensions: 1450/1160/H2980 mm -Weight: 1300 kg

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 CNC path control Ultimax 3 Travel X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Table size (with water groove) 1120 x 500 mm Spindle holder SK 40 Distance spindle nose - table 150 - 760 mm Projection 450 mm Hnjdpjtrhq Hjfx Afnsh Spindle speed 80 to 8000 rpm infinitely variable Feed rate 3 to 16,000 mm/min. Rapid traverse 24 m/min. Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions - Fully protected cabin with sliding door - Rotating control panel - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind - trough rinsing Machine width 2400 mm Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg good condition