Used Aries 245 for sale (2,309)

Year of construction: 2022, condition: good (used), 1 x PA Eclipse-R Rotary Tray Sealer Csdpfx Adez Ehfyjhorh Gas Flush Year: 2022 Serial Number: ECR-MC-00046

Condition: good (used), Year of construction: 2017, operating hours: 6,240 h, functionality: fully functional, machine/vehicle number: 6700-112239, overall weight: 1,540 kg, load capacity: 245 kg, arm reach: 3,000 mm, This is an ABB IRB 6700-245/3.00 industrial robot with an IRC5 controller and an RW6 PC, manufactured in 2017. We would be happy to offer you this robot as a fully refurbished unit! The controller includes the following options: VDPUC Driver RobotWare Base English 888-2 PROFINET Controller/Device 963-1 PROFIenergy 687-1 Advanced Robot Motion 603-1 Absolute Accuracy 988-1 RW Add-In Prepared 606-1 Conveyor Tracking 608-1 World Zones 610-1 Independent Axis 611-1 Path Recovery 612-1 Path Offset 885-1 SoftMove 1180-1 Tool Control 613-1 Collision Detection 614-1 FTP SFTP and NFS client 616-1 PC Interface 688-1 RobotStudio APP Connect 623-1 Multitasking 624-1 Continuous Application Platform Crodpfx Adjz Ipywehsh 813-1 Optical Tracking 625-1 Discrete Application Platform 628-1 Sensor Interface 689-1 Externally Guided Motion (EGM) 1341-1 / 1520-1 Integrated Vision Interface 630-1 Servo Tool Change

Condition: used, PPM Rotary Lobe Pump Model LH84L - 4981 PU Crjdpsz E Iawjfx Adhjh Ratio - 2.9451 : 1 RPM - 500 Sanitary lobe pump Port size - 90mm flange

Year of construction: 2016, operating hours: 40 h, condition: like new (used), functionality: fully functional, 💎 Highlight: Only approximately 60,000 packs (approximately 40 operating hours) processed during the trial run! For sale is an absolutely like-new, high-end thermoforming packaging machine, a MULTIVAC R 245, in the extremely rare and hygienic medical version (Clean Design) (pp. 2, 15). The machine was purchased in 2016 for a medical project and was only used for a few test cycles in the sterile cleanroom. It is in absolute factory condition, both mechanically and visually (pp. 1-2). • Manufacturer: MULTIVAC Sepp Haggenmüller SE & Co. KG (p. 1) • Type: R 245 Medical / Clean Design (pp. 2, 15) • Year of manufacture: End of 2016 (pp. 1, 3) • Condition: Like new, unused (New Old Stock), stored in the cleanroom, dust-free • Operating hours: Only approximately 60,000 individual packs (equivalent to approximately 15 cycles) (p. 14) 📦 Technical data & dimensions • Total footprint (L x W x H): approximately 700 cm x 140 cm x 230 cm (including discharge conveyor) • Frame length, base machine: 5,500 mm (divisible frame for easier transport) (p. 6) • Machine nominal width (bottom film): 355 mm (worldwide standard, easily available) (pp. 6, 23) • Top film width: 342 mm (pp. 2, 23) • Infeed path: Comfortable, knee-free infeed path of 1,125 mm (p. 6) • Power supply: 400 V / 50 Hz / 3 phases (p. 8) • ATTENTION: no compressor included! 🛠️ Tool & format data (4-cavity contour tool) Cedszwgxropfx Adhsrh The installed original tool provides a highly precise, visually appealing contour packaging (ergonomic oval/drop shape), ideal for premium products (p. 14): • Format layout: 4 lanes side by side / 1 row (pp. 13-14) • Actual cavity inner dimensions per cavity (L x W): 152 mm x 64 mm (pp. 14, 16) • Package outer dimensions (L x W): 185 mm x 82 mm (pp. 14, 23) • Package depth: 19.5 mm (mold plate type 5, directly water-cooled) (pp. 14-15) • Infeed / discharge length: 185 mm (pp. 13-14) ✨ Premium features & expensive optional extras (included!) • Integrated printer: MULTIVAC MR293 HP/TT in-line direct printing system with a fully integrated MULTIVAC TTO 10 thermal transfer printer (300 dpi) for printing logos, batch numbers, and expiration dates directly in the control system (pp. 19-20). • Integrated chiller: Rittal air/water heat exchanger in a stainless steel housing for self-contained tool cooling in a closed circuit (no external water connection required) (pp. 6, 11). • Automated discharge conveyor: High-quality Intralox discharge conveyor (800 mm) with a blue Intralox chain and its own frequency inverter for synchronous package transfer (p. 12). • Scrap film management: Original MULTIVAC RSW 20 edge strip winder with integrated tear-off control and winding drive for clean film disposal (p. 12). • Gas flushing device (MAP): Gas injection bars installed on the tool side for packaging under modified atmosphere are available. • Control system: Modern 12.1" color touchscreen terminal with HMI 2.0 user interface and IPC 06 control (Windows Embedded) (pp. 9-10). • Documentation: Operating manual, spare parts catalog, electrical and pneumatic wiring diagrams in German included in the scope of delivery (pp. 19-20). 💰 Price € 39,900,- net, excluding VAT. • Shipping costs: Available upon request, throughout Europe • Delivery time: Immediately available • Inspection and collection: possible at any time by appointment (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our general terms and conditions, all prices excl. VAT, ex wareh

Year of construction: 2019, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 2450099150, 1 No 2019 Elumatec MGS245/00+AMS Upstroke saw with 6.7m infeed roller bed, with 7.6m outfeed roller bed – however, calibrated cutting unit to 6.8m Saw fitted with calibrated automatic measuring system for accurate cutting This machine can cut straight cuts, mitres up to 55 degrees and compound mitres. Straight cut maximum in table below. Crsdpfx Ajzupzqjdhoh Max Width of material cutting 455mm BUYER TO ARRANGE COLLECTION OF SAW WE CAN ASSIST WITH LOADING ONTO SUITABLE VEHICLE

Condition: good (used), 1 x PA 185 Rotary Traysealer Serial Number: 13231859654 Cedsz Eg Utjpfx Adhjrh 200mm x 150mm tray

Condition: good (used), Year of construction: 2019, functionality: fully functional, A complete shredding system is for sale. The machine can be inspected at any time. Codpsz Ixfisfx Adhorh

Condition: good (used), Year of construction: 2012, functionality: fully functional, Aerzen Delta Hybrid D75L Rotary Lobe Compressor Credpfxeyxnwhj Adhjh

Year of construction: 2022, condition: used, functionality: fully functional, MIX s.r.l. ATEX dust collection filter unit, dust separator, and rotary airlock Receiving filter + hopper, type A-SELD, size 5B12 Credpfx Ajz Iq Ntsdhjh Year of construction: 2022 Filter housing diameter: approx. 950 mm Filter surface area: approx. 11 m2 Equipped with pneumatic filter cleaning, Hoerbiger explosion pressure relief, and Vaga Wave S61 level indicator Rotary airlock at the bottom: MD200 EX Details Brand: MIX s.r.l. Description: ATEX Filter unit Type: A-SELD Dimensions Approx. 115 x 110 x 300 cm Material and design Material: Stainless steel 304 Design: cylindrical filter unit on a frame Location Location: 4th floor Condition Condition: used

Condition: ready for operation (used), Year of construction: 2018, operating hours: 14,396 h, travel distance X-axis: 350 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: SmoothX, workpiece height (max.): 350 mm, total height: 2,840 mm, total width: 1,900 mm, table load: 200 kg, overall weight: 7,100 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, tool weight: 8,000 g, product length (max.): 3,060 mm, number of axes: 5, This 5-axis Mazak VARIAXIS J-500/5X was manufactured in 2018. It features a maximum workpiece diameter of 500 mm and a maximum table load of 200 kg. The machine is equipped with a 19-inch colour touchscreen and a maximum spindle speed of 12,000 rpm. If you are looking to get high-quality simultaneous 5-axis machining capabilities, consider the Mazak VARIAXIS J-500/5X vertical machining centre we have for sale. Contact us for further details. • Cutting time (“cutting only”): 14,396 h 54 min • Working capacity and travels • Max workpiece diameter: 500 mm; height: 350 mm • A-axis tilt: -120° to +30°; C-axis rotation: ±360° • A/C indexing increment: 0.0001° • Rapid traverse X/Y/Z: 30,000 mm/min Codpez Ipzuefx Adhsrh • Max cutting feed X/Y/Z: 30,000 mm/min • A-axis indexing time: 0.6 s per 90° • C-axis indexing time: 0.55 s per 90° / 1.05 s per 180° • Guideways: Roller linear guideways • Table and clearances • Tilting/rotary table with A and C axes • Table size: 500 × 400 mm • T-slot table (as specified in final configuration) • Spindle nose to table surface, table horizontal: 50–560 mm • Spindle nose to table, table vertical: 40–550 mm • Spindle • Spindle chiller; spindle cooling oil tank: 16 L • Programmable spindle orientation in 1° increments • Tool changer and magazine • ATC with recovery function; digital magazine display; external magazine operating panel • Tool selection: fixed magazine addresses with automatic shortest-path selection • Max tool length: 300 mm • Max tool diameter with adjacent tools: 90 mm; with adjacent pockets empty: 130 mm • Chip-to-chip time: 6.20 s • Measuring and probing • Automatic tool length measurement and tool breakage detection • G37 automatic tool length measurement function • Absolute positioning system • MAZA-CHECK system • Preparation for RMP600 workpiece probe • Coolant and thermal management • Through-tool high-pressure coolant (~15 kgf/cm² ≈ 14.7 bar), flow ~35 L/min • Coolant tank: 300 L • Coolant washdown system • Cooling for X/Y/Z-axis ball screws • Control and software • MAZATROL conversational and EIA/ISO programming; simultaneous 5-axis control in EIA/ISO • G00 Slope Constant; Smooth restart; Tilted machining plane; Inverse Time Feed • Extended work offsets: 300 pairs; Variable macros: 600 variables • Polar coordinate programming; Tornado machining cycle • High-speed machining and smoothing; Geometric compensation for rotary axes • Seamless Corner Control; Variable Acceleration Control • Interfaces: USB, LAN, SD memory card • Safety, enclosure, compliance • Full working-area enclosure with top cover • Interlocked operator door; working-area lighting • Intelligent Safety Shield (ISS) • CE marking • Automation/operation aids • Automatic machine power on/off and warm-up Additional equipment • Right-side hinged-belt chip conveyor for steel machining • European-market power transformer • Machine installation kit • Polish manuals and safety labels Technical Specification Taper Size SK 40 Through-spindle Coolant Yes

Condition: good (used), Year of construction: 2017, Seal It Systems Rotary pot sealer Cjdjz Dxpgjpfx Adherh 2017, Stainless, rotary pot sealer, with magazine for pots and pre cut seals, heated sealing press and push arm piston to remove finished pots, previously used for small sauce dip pots 60mm x 40mm, with space to add a filling machine, HMI touch screen control, mobile

Condition: used, Year of construction: 2021, functionality: fully functional, input voltage: 400 V, - Did you know that energy costs can be reduced by up to 40%? - The thermal oil circulates evenly through the heating radiators at temperatures up to 300°C. The heat is distributed gently and consistently over the products. - Control: PLC touchscreen control panel (including Dutch language option) with memory for 199 automatic baking programs, each with 5 phases. - Advantages: Energy-efficient, very quiet in operation, precise temperature control, and prevents products from drying out. - Heating: Connection to a central thermal oil system (no separate gas burner or flue gas system required in the bakery). Codpjz Imk Hjfx Adherh - Trolley capacity: Suitable for 1 or 2 trolleys/carts (standard trolley sizes such as 600 x 800 mm or 600 x 1000 mm). - Extremely suitable for medium-sized to large bakeries. - Heating power: approx. 80 kW - Electrical connection power: approx. 4.6 kW - Electrical connection: 400V three-phase power - Control voltage: 230V - Heating: Oil-fired

Condition: ready for operation (used), Year of construction: 2023, overall weight: 1,540 kg, load capacity: 245 kg, arm reach: 3,000 mm, number of axes: 6, This 6-axis ABB IRB 6700-245/3.00 was manufactured in 2023. It features a payload capacity of 245 kg and a reach of 3.00 m, making it suitable for various applications. The robot arm is equipped with advanced software extensions, including collision detection and multitasking capabilities. If you are looking to get high-quality automation capabilities, consider the ABB IRB 6700-245/3.00 robot arm we have for sale. Contact us for further details. - Protection Rating: Standard- Calibration Method: Axis Calibration- Controller Variant: Single Cabinet Controller IRC5- Supply Voltage: 400V- Power Connection: Plug HAN HSB 6p+E- Main Switch: Rotary switch- Cabinet Ambient Temperature: Up to max. 45°C- Manipulator Cable Length: 7 m- FlexPendant Cable Length: 10 m- FlexPendant Option: Removable (Jumper plug included)- Software / RobotWare: RobotWare 6- Software Extensions: World Zones, Path Recovery, Collision Detection, PC Interface, FlexPendant Interface, Multitasking, MultiFunction- Safety Options: SafeMove Pro, PROFIsafe F-Device, Safety Module- Fieldbus / Network: ProfiNet I/O Master/Slave, Ethernet connection on connector panel, Ethernet M12 on base plate- DressPack Configuration: For Material Handling (Base to Axis 3)- Operating Mode Selector: Keyless Selector 3 modes- Service Socket: 230V- Included Accessories: Cable reel 10 m Cedpfx Adoztrtmjherh

Condition: used, maximum load weight: 64,900 kg, overall weight: 94,100 kg, axle configuration: > 3 axles, first registration: 08/2021, Gooseneck, detachable * Loading platform: 3,750 mm x 2,480 mm * Maximum technical saddle load: 30,000 kg (without using the front axle) * Hydromechanical steering with multi-chamber hydraulic cylinder * Hydraulic lifting and lowering function * 2 support cylinders * Hydraulic differential lock * Operating elements for hydraulic functions on the left-hand side in the direction of travel, including a pressure gauge with a diagram for determining saddle load, as well as a pressure gauge for monitoring the pre-tension pressure in the steering system * Access ladder to the gooseneck * Hydraulic claw locking for the platform or axle * Multifunction quick coupler * Air gun for cleaning the multifunction quick coupler ---- Front 2-axle axle assembly * 4 wheels per axle line, ball-bearing swivel axle units * Axle manufacturer / BPW * Axle width: 2,750 mm / Wheelbase: 1,510 mm * Single tires: Conti 245/70 R 17.5 143/141K (146/146 F), tread HT3, 3PMS * Hydraulic axle equalization, lift: 600 mm * Ride height: 1,145 mm + 340 mm / - 260 mm * Additional lifting option for all axles in the front axle assembly * Floor covering: sheet metal * Additional warning sign holders, mounted on the front axle assembly ----Braking system with TIM Drum brake all-wheel drive air brake system with diaphragm brake cylinders * Automatic load-dependent brake (ALB) (AGS) Csdpfx Adez Ivnushjrh * Parking brake by means of spring-loaded cylinders * EBS / ABS (Electronic Braking System) manufactured by KNORR-BREMSE * Socket for EBS on the front end of the gooseneck * Vehicle stability control RSP (Roll Stability Program) ----Flatbed platform, single telescopic * Two external box-shaped outer/inner beams * Height of the outer beams: 300 mm * Carrier width of the outer beams: 730 mm + 120 mm edge strip * Front end with coupling claws * Without floor covering between the two longitudinal beams * (L x W) 7,500 mm x 2,750 mm, telescopable by 2,800 mm to a maximum of 10,300 mm * With a separating point * Loading height, loaded: approx. 450 mm, ground clearance: approx. 150 mm * Including a short, permanently welded-on front ramp * And 1 pair of aluminum ramp wedges, at the front ----Rear 4-axle axle assembly * 4 wheels per axle line, ball-bearing swivel axle units * Axle manufacturer / BPW * Axle width: 2,750 mm / Wheelbase: 1,510 mm * Single tires: Conti 245/70 R 17.5 143/141K (146/146 F), tread HT3, 3PMS * Hydraulic axle equalization, lift: 600 mm * Ride height: 1,100 mm + 385 mm / - 215 mm * Floor covering: sheet metal ----Combined excavator-tipping body * (Length x Width) 5,770 mm x 880 mm/1,538 mm * Splash guard with water-absorbing mats on all axles * Aluminum partition sheet in the excavator body, front and rear, plug-in ----Load securing Gooseneck * 4 pairs of threaded sockets M30 * 1 pair of lashing points LC 20000 daN * 2 pairs of lashing points LC 800 daN Front axle assembly * 3 pairs of threaded sockets M36 on the loading platform (16,000 daN) * 1 pair of threaded sockets M36 on the side (16,000 daN) * 1 pair of lashing points LC 20000 daN Loading platform, flatbed * 1 pair of lashing points LC 20000 daN * 3 pairs of lashing points LC 10000 daN * 3 pairs of threaded sockets M 30 * 3 pairs of threaded sockets M30 on the inner beam Axle assembly * 2 pairs of lashing points LC 10000 daN * 2 pairs of threaded sockets M36 on the loading platform (16,000 daN) * 3 pairs of rail pockets 100 x 50 mm (LC 2000 daN) * 1 pair of threaded sockets M36 in the excavator body (16,000 daN) * 4 pairs of el

Condition: used, functionality: fully functional, input voltage: 400 V, total width: 850 mm, total length: 1,980 mm, total height: 1,325 mm, - Standard internal memory with 37 programs, each with a maximum of 20 stages - Mechanical height adjustment of the bowl - Wide range of bowl height adjustment, allowing the bowl to be removed without removing the tool - Precise recipe preparation thanks to digital time and speed indicators and automatic electronic shut-off - Automatic, computer-controlled start-up program protects the tool and machine Cedpsz Inntofx Adherh - Automatic, slow lowering of the tool while the bowl rises - Excellent safety with two-hand operation - Protective cover made of impact-resistant plexiglass; optionally available in stainless steel or as a safety guard - With protective housing - Easy to move thanks to its low weight and compact dimensions - LED for bowl illumination - Quick-change system for tools - Easy to clean, particularly quiet - GS safety mark for reliable safety

Condition: ready for operation (used), Year of construction: 2020, travel distance X-axis: 350 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: SmoothG, total height: 2,840 mm, total width: 1,900 mm, overall weight: 7,100 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 30, tool weight: 8,000 g, product length (max.): 3,060 mm, number of axes: 5, This 5-axis Mazak VARIAXIS J-500/5X was manufactured in 2020. It features a maximum spindle speed of 18,000 rpm and a rapid traverse rate of 30,000 mm/min. The machine includes a tool magazine capacity of 30 tools and a robust table size of 500 x 400 mm. If you are looking to get high-quality machining capabilities, consider the Mazak VARIAXIS J-500/5X vertical machining centre we have for sale. Contact us for further details. • CNC control: MAZATROL SmoothX with 19-inch colour touchscreenWorking capacity and travels • A-axis tilt: -120° to +30° • C-axis rotation: ±360° • A/C indexing increment: 0.0001° • Rapid traverse X/Y/Z: 30,000 mm/min • Max cutting feed X/Y/Z: 30,000 mm/min • A-axis index time: 0.6 s per 90° • C-axis index time: 0.55 s per 90° / 1.05 s per 180°Table and clearances • Tilting/rotary table (A/C axes) • Table size: 500 × 400 mm • Table with T-slots (as per final configuration) • Spindle nose to table surface (table horizontal): 50–560 mm • Spindle nose to table centre (table vertical): 40–550 mmSpindle • Spindle chiller with 16 L cooling oil tank • Programmable spindle orientation in 1° incrementsTool magazine and ATC • ATC with recovery function; digital magazine display and external operating panel • Tool selection: fixed addresses with automatic shortest-path selection • Pull stud: Yamazaki ANSI • Max tool length: 300 mm • Max tool diameter with adjacent tools: 90 mm • Max tool diameter with adjacent pockets empty: 130 mm • Chip-to-chip time: 6.20 sMeasuring and probing • Renishaw RMP600 radio workpiece probe • MAZA-CHECK system • Automatic tool length measurement and tool breakage detection • G37 automatic tool length measurement • Absolute positioning systemCoolant and chip management • Through-tool high-pressure coolant: approx. 15 kgf/cm² (≈14.7 bar), approx. 35 L/min • Coolant tank: 300 L • Coolant washdown system and manual washdown gun • Cooling for X/Y/Z ball screws • Workpiece air blastControl and software • MAZATROL SmoothX CNC • EIA/ISO programming package • Simultaneous 5-axis control • Additional 5-axis machining package for SmoothX • 3D coordinate rotation • Smooth synchronous tapping • G00 Slope Constant (rapid optimization) • Smooth restart • Tilted machining plane • Inverse Time Feed • Extended work offsets: 300 pairs • Variable macros: 600 variables • High-speed machining and smoothing • Geometric compensation for rotary axes • Interfaces: USB, LAN, SD cardConstruction, safety, and other features • Electronic handwheel • Three-colour signal tower • Automatic machine power on/off and warm-up • Roller linear guideways • Full enclosure with top cover; interlocked operator door • Work area lighting • Intelligent Safety Shield (ISS) • CE marking Csdez Iqgrjpfx Adhjrh Additional equipment • CROWTHER right-side hinged-belt chip conveyor (for steel machining) • GX500 mist extraction unit with extraction preparation • European-market power transformer • Machine installation kit • Polish manuals and safety labels Technical Specification Taper Size SK 40 Through-spindle Coolant Yes

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Used Blue Mac 2510 Static Trommel Year 2016 10 M Long x 2.5 M Diameter Crjdpfx Aozzrwbjdhjh 50mm Round Holes, 8mm Thick All New Drive Shafts & Wheels 4 x 5.5kW Electric Motors / Bonfiglioli Gearboxes 21 Tonne Weight Excellent Condition Ready To Go To Work

Year of construction: 2017, condition: used, This listing is for a Agilent Eclipse Fluorescence Spectrometer. The unit is in full working condition and is ready for immediate release. Supplied with cables, software disk, License key,spare diffuser and Neutral density attenuator. The Agilent Cary Eclipse fluorescence spectrometer is sensitive, accurate, and flexible. Ideal for use as a routine fluorometer, the Cary Eclipse can easily be switched between fluorescence, phosphorescence, chemiluminescence, and bioluminescence measurements. Additional flexibility can be achieved through various accessories, including temperature control and solid sample handling, automatic polarizers, and a microplate reader for high sample throughput. Type:Benchtop fluorescence spectrometer Control Software :Cary WinFLR Light Source:Xenon flash lamp (80 Hz) with 10-year warranty on new instruments Maximum Scanning Speed :24,000 nm/min Modes of Operation:Fluorescence,Phosphorescence,Chemiluminescence,Biolumi nescence,Time resolved phosphorescence. Codpfx Aexx Ax Rjdhsrh Power Requirements:100-240 VAC, 50/60 Hz Spectral Bandwidth Emission: 1.5 nm, 2.5 nm, 5 nm, 10 nm, 20 nm & 10 nm round nm Excitation: 1.5 nm, 2.5 nm, 5 nm, 10 nm, 20 nm & 10 nm round nm Wavelength Accuracy:± 1.5 nm Wavelength Range:Operational emission: 200 - 900 nm Operational excitation: 200 - 900 nm Depth:644 mm Height:271 mm Weight:30 kg Width:608 mm

Year of construction: 2018, condition: used, This listing is for a Solaris Biotech Solution Jupiter 3.0 Fermentor. The unit is in full working condition and is ready for immediate release. The Solaris Biotech Solution Jupiter 3.0 Fermentor is a highly versatile and configurable bioreactor system, ideal for laboratory-scale applications. With advanced automation and robust design, it caters to a wide range of research and development needs, as well as small-scale production. Key Features: Autoclavable and Sterilizable Design: Cedpfxjxxz T Hs Adhsrh Ensures ease of cleaning, sterility, and reliable operation for contamination-free processes. Flexible Vessel Options: Available in various aspect ratios and thermoregulation designs, with total volumes ranging from 2.0 L to 10.0 L. Pressure Control: Handles pressures up to 1.6 bar in the 2 L and 4 L jacketed vessels, with continuous gas-in and gas-out flux. Innovative SCADA Software (LEONARDO 3.0): Provides automated management of fermentation and cultivation processes, ensuring precision and ease of operation. Parallel Management: Supports simultaneous operation of up to 24 units via a single HMI with a 24” display, streamlining complex workflows. Remote Access: Enables monitoring and control via PC, tablet, or smartphone, using QR code scanning or a dedicated web portal for remote convenience. Applications: Process Development and Optimization: Facilitates experimentation and optimization of bioprocesses for scale-up and scale-down studies. Education and Research: Suitable for educational purposes and basic research in bioprocessing. Small-Scale Production: Supports small-batch manufacturing and pilot-scale processes. Benefits: Cost-Effective Performance: Combines advanced features with affordability for laboratory and production environments. High Level of Automation: Simplifies management of fermentation and cultivation with LEONARDO 3.0 software, reducing operator workload. Versatility and Configurability: Adaptable to a wide variety of applications, ensuring compliance with validated GMP regulations. Technical Specifications: Material: VALOX resin (external) and silicone (internal) Autoclavable: 121-133°C for up to 30 minutes Residual Volume: 0.04 mL Flow Rate: 65 mL/min

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: IRB6700-245/3.0 IRC5 (RW6), load capacity: 245 kg, arm reach: 3,000 mm, controller manufacturer: ABB, controller model: IRC5, teach pendant manufacturer: ABB, Equipment: documentation/manual, IRS Robotics® Refurbished industrial robot. 100% complete and fully functional: robot arm, controller, all cabling and teach pendant. Includes our warranty and a comprehensive 77-Point Protocol evaluation performed by our in-house robotics engineers. Brand: ABB Type: IRB6700-245/3.0 Controller: IRC5 Payload: 245 kg Reach: 3.0 m Optional: We can deliver the robot with ABB IRBTx004 track (up to 32 meters if needed). Crodpfxewnrpae Adhsh Complete, including a 7th axis drive unit integrated in the robot controller, motor, cable chain, grease pump – fully functional and operational. IRS Robotics® refurbished: 77-Point Protocol – fully tested on our test benches, new oil/grease, new batteries, thoroughly cleaned, painted in your desired RAL colour. Includes Accuracy Status Measurements (repeatability, accuracy, backlash). About: Our daily reliable business is the delivery of refurbished A-Brand robots: ABB – KUKA – YASKAWA. Est. 2002. We ship worldwide.

Condition: as good as new (ex-display), Year of construction: 2024, total height: 1,165 mm, overall weight: 800 kg, total width: 1,515 mm, tank capacity: 240 l, input voltage: 400 V, We are offering a Spaleck VA 245 vibratory finishing system, manufactured in 2024. This is a demonstration machine. Manufacturer: Spaleck Crsdpsznuddsfx Adhoh Model: VA 245 Year of manufacture: 2024 Machine type: Vibratory finishing system Container volume: approx. 240L Container cross-section: approx. 285mm A suitable dryer is also available. Inspections can be arranged by appointment. If you have any questions or require further information, please do not hesitate to contact us.

Condition: used, This listing is for a Agilent Cary 100 UV-Vis spectrophotometer. The unit is in full working condition and is ready for immediate release. The Unit is supplied with a Agilent PCB 1500 Water Peltier System. The Agilent Cary 100 UV-Vis Spectrophotometer is a highly versatile and cost-effective instrument designed for a broad range of laboratory applications, making it an excellent choice for routine research in various fields such as chemistry, biochemistry, and materials science. Key Features: Double Beam Design: This design enhances accuracy and precision by allowing simultaneous measurement of the sample and reference, mitigating the impact of fluctuations in the light source. Cedpfx Adsxxz Scjhjrh Wavelength Range: The instrument operates over a wide wavelength range of 190 to 900 nm, making it suitable for diverse applications, including those that require measurements in the UV and visible spectrum. Variable Spectral Bandwidth: The spectral bandwidth can be adjusted as low as 0.2 nm with variable slits, enabling users to optimize data resolution for specific experiments and applications. High Scanning Speed: With a scanning speed of up to 3000 nm/min, the Cary 100 provides quick data acquisition, enhancing efficiency during experimentation. Superior Photometric Stability: The optical design ensures robust photometric stability, resulting in consistent measurements over time, which is crucial for reproducibility in scientific research. Signal-to-Noise Optimizations: The special signal-to-noise reading mode allows for customizable control over measurement precision, enabling reduced scanning times in high-energy regions and improved averaging in lower throughput conditions. Flexible Operating Modes: Users have the flexibility to operate the spectrophotometer in single, double, or dual single beam modes, adapting the functionality to different experimental needs. Modular Software Control: The Cary WinUV software, which is Windows-based and modular in design, allows users to customize their experience with capabilities like advanced data processing, automatic peak labelling, and enhanced reporting and file transfer options. Accessories and Sample Holders: The instrument can be fitted with a wide range of accessories to extend its capabilities, and it comes shipped with liquid sample holders for immediate use. Benefits: Robust and User-Friendly: The quartz-coated optics not only ensure durability and easy cleaning but also protect against corrosive environments, thereby extending the lifespan of the instrument. Cost-Effective: Designed for routine laboratory work, the Cary 100 provides reliable performance without incurring high costs, making it an economical choice for laboratories. Tailored Experience: The software's modularity allows users to customize their operations and processing tools to fit specific requirements, enhancing productivity and workflow. Versatile Applications: With applications spanning materials testing, petrochemicals, and biotech/pharma studies, this spectrophotometer is a valuable addition to any research setting. The PCB 1500 Water Peltier System is an efficient and precise circulating water bath designed for temperature-sensitive applications in laboratories. Utilizing Peltier technology, this system is ideal for maintaining controlled temperatures for various experiments, particularly in conjunction with thermostatted cell holders. Key Features: Precision Temperature Control: Offers a temperature control pr...

Condition: used, This listing is for a Varian Saturn 2100T GC/MS ion trap with turbomolecular pump comes complete with Varian CP-8200 Autosampler Varian 3900 GC-gas chromatograph, includes Software/PC/Printer Equipment can be serviced/renovated/refurbished on request at extra cost. Crodsxzh A Tjpfx Adhsh

Condition: used, functionality: fully functional, power: 4 kW (5.44 HP), Hobart H600 mixer for pastry chefs. EXTERNAL DIMENSIONS (in cm): - width: 70 - length: 105 - height: 140 Csdsz Hxd Njpfx Adhjrh TECHNICAL SPECIFICATIONS: - power: 1.5 kW - voltage: 400V 3-phase 50Hz - mixing bowl capacity: 60 liters - weight: 325 kg EQUIPMENT: - 2 mixing bowls - whisk, paddle, hook

Condition: good (used), Year of construction: 2003, IPE Compact Filter BG Jet 300 Year of manufacture: 2003 Filter area: 24.7 m3 Category: BIA-KAT Airflow rate: 4000 m3/h Negative pressure: 2110 Pa Extraction diameter: 250 mm Compressed air connection: min. 6 bar - max. 8 bar Connected load: 5 kW Nominal speed: 4 kW Length: 2000 mm Width: 1000 mm Height: 3420 mm Weight: 725 kg (extraction) New filters Press: Genius 1 Hydraulic operating pressure: 190 bar Year of manufacture: 04/2003 Power: 7 kW Location: available from stock 54634 Bitburg - immediately available - Subject to prior sale Codpsy Dc R Tofx Adhorh Sold as seen, without warranty without guarantee