Condition: like new (used), Year of construction: 1995, operating hours: 650 h, Weiler DZ 32 CNC Lathe Swing diameter over bed cover 470 mm Maximum machining length 200 mm Spindle head DIN 55026A 5 Spindle bore 35 mm Bar bore 24 mm Swing over bed 470 mm Maximum speed 8000 rpm Lathe chuck with 160 mm key bars VDI driven tools Celn Ukbov R Hfioyjrb Siemens 820 T control system Some driven tools, some VDI holders Lathe chuck with various jaws The machine comes from a school and is in very good condition

Year of construction: 2013, operating hours: 69,000 h, Condition: ready for operation (used), General Data Measurements width 1890 mm Measurements depth 2140 mm Measurements height 2050 mm Machine weight 5600 kg Control Unit Brand FANUC Model Series 0i-TD Main Drive Number of spindles 2 Spindle speed range 4000 Spindle motor power 11/7.5 kW Movement X-Axis Movement 150 mm X-Axis Rapid Traverse 24 m/min Z-Axis Movement 160 mm Z-Axis Rapid Traverse 24 m/min Turret Number of turrets 2 Celowgqazon Ukbyerb Media Power consumption 43 kVA Additional Equipment 20 pcs tool holders This Takamaz XW-130 Lathe was manufactured in Japan in 2013 and has been operative for 69000 hours, from which 40000 are cutting hours. This machine incorporates 2 turrets each with 8 positions. 20 pcs tool holders are included. Application Types Turning

Condition: excellent (used), Year of construction: 2018, Swing over carriage 355mm, Bar capacity 65mm, Creln Ujrztr Rjkbyob Maximum machining diameter 310mm, Maximum cutting length 521mm, Spindle speed 4,000 rpm, Milling speed 5,000rpm, C axis 0.001 degrees, spindle power 22/18.5 Kw, 12 station turret, Fanuc 32i control, swarf conveyor, tool setter , 3 jaw chuck

Condition: excellent (used), Year of construction: 2018, EMCOTURN E 65 SMY BigBore Siemens 3-axis CNC lathe with counter spindle and driven tools including Y-axis AND C-axes Year of manufacture 2018 30,000 operating hours Machine was used for plastics machining. Machine is in operation and can be tested. Chip conveyor has been recently overhauled. Highly efficient universal lathe for complete machining with stable and precise linear guides. State-of-the-art SINUMERIK 828D control technology with ShopTurn dialog programming. Main spindle: • A2-6" connection (DIN 55026) • Max. bar capacity ø65 mm • Max. drive power: 22 kW • Max. torque: 305 Nm • Speed range: 0-5000 rpm Counter spindle: • A2-6" connection (DIN 55026) • Drive power: 16.5 kW • Max. torque: 125 Nm • Speed range: 0-5000 rpm Tool turret: 12-station IDI 30 radial tool turret with directional logic for up to 12 driven tool holders! - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5000 rpm Y-axis: - Travel range: +/-40 mm - Hollow clamping cylinder including draw tube - C-axis for main/counter spindle - Mechanical spindle brakes - Sinumerik 828D control system with HMI Operate Crjlnswf Ni So Ukbyjb - SHOPTURN dialog programming - USB interface - Network drive/Ethernet - 10.4" TFT color monitor - 3D simulation, and much more - Machine light - Coolant system with 3.5 bar coolant pump - Hydraulic unit - Chip conveyor interface - Documentation SuperBigBore 95: Allows bar passage up to 95 mm instead of the standard 65 mm (main spindle). Drawbar connection: M102 x 2 Spindle connection (DIN 55026): KK8 Max. speed 3,500 rpm Max. torque 380 Nm Max. power 22 kW Max. chuck size 250 mm (315 mm) Differential pressure clamping for main and counter spindle: -Sensitive adjustment of the spindle clamping pressure -Counterpressure principle -Manually adjustable hydraulic clamping pressure analog/digital converter -Display on the machine control -Adjustment range 6-60 bar -The clamping pressure on the workpiece depends on the clamping cylinder and the clamping device Electronic handwheel Parts collecting device E65 Bar loader: EMCO SL1200 FOR E45/E65/MT45/MT65/ HT45/HT65-PM INCL. EMCO INTERFACE short bar loading magazine for the automatic feeding of bar stock with diameters from 8 to 95 mm and lengths up to 1200 mm. The loading magazine is particularly characterized by its compact footprint and ease of use. EMCO Interface included! Tool measurement Multiflow cleaning gun Chip conveyor 1200 mm: Hinged belt conveyor with ejection height of 1200 mm Suitable for: Long steel chips, chip balls, and wool shavings Dry and wet machining 14 bar high-pressure coolant system Coolant can be switched to air through the tool turret: - Programmable via M command

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, TECHNICAL DETAILS: CNC Control: MAZATROL 640 T X-axis mm: X-axis mm: 190 Z-axis mm: Z-axis mm: 515 Y-axis mm: Y-axis mm: - Maximum Turning Diameter mm: / Max. Turning Diameter mm: 350 Cº Axis Increase: - Maximum Turning Length: Max. Turning Length mm 515 Creln Uswdwmpjkbyob Cutting feedrate mm / min X, Z, Y: Cutting feedrate mm / min X, Z, Y Swing over bed mm: Ø 575 Swing over slide mm: Over cross slide mm: Ø 510 Bar work capacity mm: Ø 77 Rapid traverse max. mm / min X, Z, Y: Rapid traverse max. mm / min X, Z, Y: 30,000 / 33,000 Main Spindle L-SPINDLE 250 mm Spindle speed rpm: Spindle speed rpm: 35 - 4,000 Spindle power kW: Spindle power kW: 26 Torque Nm: Torque Nm: - Spindle bore Main mm - Spindle nose Main A2-6 Turret Positions Upper Turret Positions: 12 Number of rotating tool stations (Each turret): 12 Rotating tool speed: Rotary Tool power: EQUIPMENT: Chip Conveyor Cooling System Turret Plate 250mm - Chuck 250mm Counter point - Tailstock MACHINE DIMENSIONS: Length mm / Length mm: 3,500 Width mm / Width mm: 1,700 Height mm / Height mm: 2,000 Weight kg / Weight kg: 6,000

Condition: good (used), Year of construction: 2004, spindle passage 60 mm turning length 280 mm control 840 D Siemens turning speed range - drive spindle 6300 U/min drive capacity - spindle motor 3,3 kW turret 1 Scheibenrevolver no. of tools in turret 1 8 worktool system DIN 69 880 / 25mm x-travel 90 mm z-travel 280 mm feed power 5500 N rapid traverse 24 m/min power capacity - milling spindle 5000 kW turret Schwalbenschwanz no. of tools in turret 2 6 x-travel 81 mm z-travel 80 mm feed power 5500 N rapid traverse X-axis 16 m/min rapid traverse Z-axis 24 m/min weight of the machine ca. 2,5 t dimensions of the machine ca. 6,0 x 2,0 x 2,0 m TThe INDEX ABC machine is a compact lathe for short turned parts made from bar stock. It has an inclined bed design with two independent turrets. The top turret is primarily intended for internal machining and machining, while the lower turret is used for external machining. The turret arrangement enables collision-safe working and simple programming programming with high tool availability. The large free space in the working area enables a favourable chip fall The work area consists of two turrets: ‘Turret 1’ - Disc turret with 7 radially arranged tool holders Ø 25 mm DIN 69880 and a holder for the reinforced synchronised spindle on the turret station 8. tools with 1’ holders can also be used with an equalising holder can also be used. The turret is prepared for the V-ledge system. - Synchronised spindle for rear end machining, simultaneous parallel machining with main spindle. Ø42 collet chuck or 3-jaw gripper chuck for internal and external clamping and external clamping. Jaw stroke 0.6 mm. Clamping diameter (external) 75 mm. - Back-boring device. Starting from the centre of the working spindle in clockwise direction, 3 stationary back-boring tools are back boring tools are arranged. These are located in the pitch circle of the synchronised spindle. The back machining is carried out simultaneously with the machining on the the working spindle. Two additional tools can also be used, can be equipped with a tool feed drive. ‘Revolver 2’ - Turret with 6 symmetrical dovetail holders and each station with 2 locating holes for cylindrical shank per station. The following tool systems can be used. - stationary tools that can be moved in the Z direction - Driven tools with cylindrical shank Ø25 (can be used in two positions per station) can be used) - including bar loader LM 3200 - + various accessories (various Ø guide half-shells/tool holders) Crjlnewbvhaj Ukbysb Technical data: - Material bar diameter: (Ø 25 / Ø 36 / Ø 52)- --> round Ø 8 - 25.4 / 8 - 36 / 8 - 52 mm --> square SW Ø 6 - 14 / 6 - 20 / 6 - 20 mm --> hexagon SW Ø 7 - 22 / 7 - 30 / 7 - 41 mm --> octagonal SW Ø 7 - 22 / 7 - 32 / 7 - 40 mm --> bar length max. 3200 mm --> from bars Ø 25 mm, min. 2,500 mm --> up to rods Ø 25 mm, min. 1,500 mm --> bar support = approx. 300 = 6 bars Ø 52 mm Mass (bar loader) = 700 kg

Condition: used, Year of construction: 1970, Weiler lathe with tailstock Celn Uehtnu Tskbyorb

Condition: ready for operation (used), Year of construction: 2011, General Data Measurements width 1460 Measurements depth 2220 Crjln Uewgp Udekbyeb Measurements height 1700 Machine weight 3100 Main Drive Spindle speed range 6000 Spindle motor power 7.5/5.5 kW Number of axis 7 Movement X-Axis Movement 140 mm Y-Axis Movement 70 (+/-35) mm Z-Axis Movement 235 mm Tools Number of station 8 Media Chip conveyor Yes Additional Equipment Bar Loader: IEMCA BOSS 545 E This 7-axis Miyano BNA-42DHY turn-mill centre was manufactured in 2011. It features a main spindle with a maximum bar diameter of 42 mm and speeds up to 6000 rpm, complemented by a counter-spindle that handles up to 34 mm and 5000 rpm. Equipped with two turrets, upper with 8 positions and lower with 6, it offers versatile machining options. Includes a chips conveyor and an IEMCA BOSS 545 E bar loader. Contact us for more information about this machine. Application Types Turning

Condition: good (used), Year of construction: 2008, Maximum cutting diameter 820mm, maximum cutting length 3048mm, C axis 0.0001 degrees, B axis -30/+210 degrees, Croljtmtktjn Ukbysb 40 ATC, spindle speed 1,600 rpm, Milling speed 10,000rpm., main spindle 37Kw, spindle taper din50, Y axis -/+ 250mm, Mazatrol Matrix control, fixed steady, swarf conveyor

Condition: excellent (used), Year of construction: 2018, Tornos Multiswiss 6x32 Year of manufacture: 2018 Operating hours: 14,100 hours Including various accessories Crsln Uswf I Rzokbysb

Condition: new, The NOMURA 32J including 70bar high pressure system, short turning conversion kit, tool presetter, and long part removal, as well as other optional equipment. Cjln Ukbshmbi Ijyerb

Condition: ready for operation (used), Lathe Fabr Takisava Type TAL 510 with lathe chuck + quick-change holder + center punch Cjlsvyuuqjn Ukbyorb

Condition: good (used), Year of construction: 2018, Swing over carriage 390mm, Bar capacity 65mm, Maximum machining diameter 335mm, Crjln Ujrbh Ubokbysb Maximum cutting length 455mm, Spindle speed 4,500 rpm, Milling speed 5,000rpm, Y axis -/+ 50mm, C axis 0.001 degrees, spindle power 15/11 Kw, 12 station turret, Fanuc 32i control, parts catcher, swarf conveyor, tool setter , 3 jaw chuck.

Condition: new, The NOMURA 38KM including 70bar high pressure system, short turning conversion kit, tool presetter, and long part removal, as well as other optional equipment. Crsln Ujhrim Njkbyjb

Year of construction: 1967, Condition: used, LatheFabr. Weipert Celneh Rwkls Ukbyjrb Type W500 turning diameter 500 mm Turning length 1000

Condition: good (used), Year of construction: 2012, Bar capacity 51mm, maximum cutting diameter 255mm, Y axis travel +/- 40mm, C axis to both spindles 0.001 degrees, 12 station upper & lower turrets, Spindle power 18kw, spindle speed 5,000rpm, milling power 18kw, milling speed 6,000rpm, Sub spindle travel 650mm, Creljvzry Ton Ukbyob swarf conveyor, tool setter, parts catcher, collet chucks, tooling, magazine barfeed, & shaft unloader

Condition: excellent (used), Tip height 175 mm tip width 800 mm Spindle bore 46 mm Spindle holder DIN 55022/5 Tailstock mount MK 3 Speed range 31.5 - 2500 rpm Longitudinal feed 0.051 - 1.034 mm/rev Face feed 0.025 - 0.517 mm/rev Machine weight 1200 kg Machine dimensions Crslnjq Ixyto Ukbysb approx. 1915 x 985 x 1355 mm

Condition: excellent (used), Year of construction: 2022, Swing over bed 600mm, swing over carriage 400mm, 51mm bar capacity machining diameter 350mm, Crjlnevzrqfs Ukbysb machining length 330mm, 12 position turret, Fanuc series I control, Spindle 4500 rpm, swarf conveyor, tool setter, tailstock, and barfeed unit.

Condition: good (used), Year of construction: 1959, HESTIKA 22N Hand lever turret lathe Celn Uorm R Duskbysrb

Condition: excellent (used), Year of construction: 2022, 300mm turning diameter, 510mm turning length, Y axis +/- 52mm, 600mm swing, 51mm bar capacity, 4500rpm, 24 station turret, Cslnjvzrpho Ukbyjrb 12.5kW spindle motor, milling 6000rpm, C axis 0.001 degrees, Fanuc I series control, tailstock, coolant, low volt light, parts conveyor, parts catcher.

Condition: used, Year of construction: 2003, Emco lathe enco Turn 420 MC with bar loader Croln Uounzgrokbyob condition see pictures

Condition: good (used), Year of construction: 1988, Lathe KMK 40 Speed 1800 rpm Turning length 1000 mm with 3 jaws 4 jaws Multix with 4 inserts Rotating center point Face plate Collet chuck with collet set Crolju Uh U Ion Ukbyeb

Condition: good (used), Kern lathe D 23 V with Forkard lathe chuck Multifix B digital display Crsln Uovl Ig Dekbysb

Condition: good (used), Technical details Turning diameter over bed: 280 mm Turning diameter over support: 170 mm Turning length: 680 Rotational speed: 40 - 1500 / 9 step rpm Spindle bore: 35 mm Top slide adjustment: 150 mm Tailstock holder MK: 3 Tailstock quill stroke: 95 mm Total power requirement: 0.9 kW Machine weight approx: Cjln Ukjq Ixqgjbysrb 410 kg Transport dimensions LxWxH: 1.6x0.8x1.4 m

Condition: refurbished (used), Year of construction: 2021, operating hours: 50 h, Functionality: fully functional, Meuser lathe M 1 L 230 x 1000 Year 2021 from Meuser new Built-up Turning length 1000 mm Machine length 2380 mm Center height 230 mm Digital readout HeidenhainND 5023 Multifix B Lathe chuck 3 jaws Mint condition with documentation Coln Ukbstuqdueyerb