Used Assembly systems & assembling machines for sale (56)

Condition: new, Year of construction: 2025, Number of placement heads: 4 Number of feeders: 50 Minimum component size / smallest printable component: 0201 (inch) components Maximum component size: ~40 × 40 mm Minimum pin pitch: ≥ 0.3 mm Kodpfx Aaexnlmisconc Maximum PCB size: Standard: 400 × 200 mm; Optional: 400 × 290 mm Z-axis travel range: 20 mm zjyingxing.com Maximum placement speed (peak): ~9,500 pcs/hour Average placement speed: ~8,000 pcs/hour Placement accuracy: 0.01 mm Nozzle buffer range: ~4.5 mm Drive / motor: Servo motor (Panasonic) + ball screw & linear guide rails (TBI linear guide) Cameras / vision system: One “mark” camera, four high-speed cameras, plus one high-definition camera Power supply: 220 V / 110 V, 50 Hz; average power consumption approx. 400 W Air requirements: Compressed air: 0.6-0.7 MPa Air pump capacity: Minimum 80-120 L/min, pump volume ≥ 60 L Number of trays (components outside feeders): Supports up to approx. 48 trays for non-feeder parts, each with coordinates within the placement area PCB handling: Automatic 'left-in, right-out'; supports left-right connection of devices (infeed/outfeed) Machine dimensions: ~900 × 1140 × 900 mm (L × W × H) Weight: ~250 kg Software / interface: English; free software updates; user interface with display

Condition: ready for operation (used), functionality: fully functional, A good used Hopper Feeder fopr feeding small parts into assembly machine or feeding a bowl feeder with bulk parts - stainless steel conveyor - flighted belt (comes with a second spare belt also) - three phase geared drive unit - 24 V DC sensors (2) for control of belt index if required Ready to ship worldwide More pictures and videos available upon request Kjdpfxjw D Ev Ej Aacsnc

Condition: new, Manual hand unit Nein J/N Automatic for single pieces Ja J/N Automatic for frames Nein J/N Clip set "351" on the loose item ----- Manufacturer description: Knedpfxskx Stne Aacsc - Base frame in stable welded construction - Clip container as tipping conveyor with separation and feeding the clips - Screwdriver with tipping conveyor for the screws to be separated, feed screwdriver pneumatic with depth adjustment - Conveyor belt length approx. 4,000 mm as NC axis - Contact and clamping cylinder - Electro-pneumatic control via PLC It can programs with different Initial and distance dimensions can be entered - Workflow automatically in flow ----- Technical specifications: - Screw height 50-120 mm - Profile length 350-3,500 mm - Table height approx. 950 mm ----- Total price of the machine ex works: on request! Freight costs within Germany: on request ! Installation, commissioning and instruction within Germany: on request ! ----- Video shows version with extra infeed belt and outfeed belt with pusher. Not included in the basic price. Can be offered as an option if required. (technical data according to the manufacturer without guarantee!)

Condition: used, Assembly line with 4 assembly stations Roller conveyor made of aluminum system profile and INTERROLL metal rollers very universally applicable thanks to modular elements and assembly pallets 400x700 mm Roller conveyor elements made of MiniTec aluminum system profile - like BOSCH REXROTH Working height: 815 mm Complete length: 13250 mm 4 longitudinal roller conveyors: effective width 405 mm, length 2500 mm, overall width: 510 mm, 16 rollers each 3 cross roller conveyors: effective width 705 mm, length 1000 mm, overall width: 810 mm, 10 rollers each 1 cross roller conveyor: effective width 705 mm, length 2500 mm, width: 810 mm, 30 rollers each 4 pieces 2-way element: effective width 705 x 405 mm. Size 800 x 450 mm, 24 ball transfer units each Kedpfet Rmfxsx Aaconc - With a total of 134 INTERROLL metal rollers, Ø 50 mm - Plastic ball transfer units in the 2-way units - ALU system profile MiniTec 45x45 mm, with 8 mm groove - Over 30 assembly pallets 400x700 mm made of multiplex boards, thickness approx. 40 mm - Buffer station for several assembly pallets - Magazine insertion line for unused assembly pallets on the rear side of the roller conveyor (length 13200 mm) - without drive, assembly pallets are pushed on the roller conveyors by hand or pushed into the buffer zones Weight: complete approx. 760 kg + the assembly pallets very good condition You can find more roller conveyors and support rollers in our store.

Condition: not inspected (used), Tyre fitting machine – Multitalent, Manufacturer: Twinbusch, Model: TW X-98, Year: 2021, Own weight: 278 kg Knedpfow U Rfljx Aacoc

Condition: ready for operation (used), Year of construction: 2016, Operational condition and available for delivery! Fully automated with a feeder system for entire magazine. *Look at the additional options spec shown on picture Additional pictures and information  upon request! Located within EU! Knjdpfx Asxpun Esacoc

Condition: good (used), Year of construction: 2008, iineo is highly configurable, offering 24 different machine variants for the single-head model: - 4 pieces of 1st generation trolleys - 4 pieces of 2nd generation trolleys - 132 pieces of 1st generation 8mm feeders - 12 pieces of 1st generation 12mm feeders - 4 pieces of 1st generation 16mm feeders - 1 piece of 1st generation 24mm feeder Knjdew Rl R Ijpfx Aacec The linear motor gantry is equipped with a rotary turret head featuring 12 pickup nozzles. The system includes a board positioning mechanism and options for oversized boards. Feeders can be configured at both the front and rear or set up front-only. The advanced iineo platform delivers multiple enhancements over the Europlacer machine range, such as an exceptionally high feeder capacity, the largest board size capability in the industry, and increased maximum component height. This platform utilises Europlacer's unique Integrated Intelligence™ and proven key features: - Highly durable and flexible turret head - Intelligent feeders - 3D Placement System (3DPS) - Powerful software solutions It also introduces new technologies, including linear motors and digital camera systems. Heads: 1 rotary head on a linear X/Y gantry with 8 or 12 simultaneous pickups and a 40-position smart nozzle bank (various options available). Placement rate: up to 14,000 components per hour (0.257 sec. per chip) Component sizes: - 01005 to 50 x 50 mm (optionally up to 70 x 70 mm and connectors up to 100 mm) Lead pitch: - 0.3 mm (QFP), 0.4 mm (μBGA) standard - 0.15 mm (QFP), 0.2 mm (μBGA) with fixed camera option Lead size: - 0.15 mm (QFP), 0.2 mm (μBGA) standard - 0.07 mm (QFP), 0.1 mm (μBGA) with fixed camera option Placement accuracy: 35 μm (QFP) to 60 μm (chip), standard Feeder capacity: up to 264 × 8 mm tape feeders plus 10 JEDEC trays Maximum PCB dimensions: - 700 x 460 mm - 700 x 600 mm - 1000 x 460 mm Additional features: - Electrical test capabilities - Fixed camera for fine-pitch components - Automatic conveyor width adjustment - Additional nozzle magazine options - Special nozzle magazine options - Rear-mounted display and keyboard - Internal matrix tray holder

Condition: excellent (used), Unused Ingersoll Rand QM Series Nut Runner - interconnecting cable and controller Kedowric Ejpfx Aacenc

Condition: good (used), Year of construction: 2010, Assembly machine / production line The upper and lower parts were previously assembled and pressed together using this device. Components include: Kedpfx Aaeglp Uyecjnc Kuka Scara KRC2sr robot, model year 2010 Pneumatic control system Electrical control system with frequency converter 4 conveyor belts Description: Robot type KR 5 scara R350 Working space volume KR 5 scara R550-Z320: 0.264 m3 Repeatability (ISO 9283) KR 5 scara R350: ±0.015 mm Working space reference point: intersection point of axes 3 and 4 Weight approx. 20 kg Item condition: used Robot data sheet Control data sheet Find more items - new and used - in our shop! International shipping costs on request!

Condition: used, Electro Dual Screwdriving Unit with Automatic Feed and Pneumatic Double Stroke BÖLLHOFF Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual screwdriving unit is equipped with a pneumatic double stroke, operated via Festo valves and cylinders. Additionally, various monitoring systems are installed for full automation. Technical data: Torque of electric screwdriver: 0.6 Nm Gearbox torque: max. 10 Nm Speed: max. 20,000 rpm Rated voltage: 3~ 0-230 VAC Current consumption: max. 7 A (per screwdriver) Pneumatic long-stroke cylinder: 80 mm Pneumatic short-stroke cylinder: 20 mm Total pneumatic stroke: 100 mm Spring stroke for screwdriver: 20 mm Distance between both screwdriving tools: 73 mm - Equipped with a TORX bit T27 or TP27 (presumably for M6 screws) - Requires Bosch Rexroth LT303 power module for operation (power module not included) Screwdrivers 1 and 2 are each composed of the following components: Rexroth type servo motor Rexroth type 0 planetary gearbox Rexroth type 0 encoder Rexroth type 0 straight drive output Component details: Electric screwdriver unit Rexroth Servo motor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current consumption: max. 7 A Rated voltage: 3~ 0-230 VAC Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material no.: 0 Efficiency: 90% Gear ratio: i=18.9 Torque: max. 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Encoder Rexroth Ksdpfx Aaehxvu Eeconc Type: 2DMC012 SZ2 Material no.: 0 Nominal torque: 12 Nm Reduction ratio: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Straight drive output Rexroth Type: 2GA82 SZ2 1/4" SQ Material no.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction ratio: 1 Weight: 0.2 kg Installation length: 90 mm One 7 m motor connection cable is included in the delivery. Overall dimensions W x H x D: approx. 180 x 920 x 300 mm Total weight: approx. 20 kg Good condition

Condition: excellent (used), MDS Type: MDS A220-PD MDS A220-PD Autoriv manual workstation A220-PD assembly system is a stationary manual workstation for processing press-fit elements. Intended use: The machine is used to press in fasteners. The worker inserts the corresponding screws, plastic nuts and the component to be and the component to be processed into the machine by hand. The operator then starts the pressing process using a foot switch. The pressing process runs automatically. Fasteners: Press-in nut, rivet nut, self-piercing nut, press-in stud, punching stud / rivet stud Thread size - M5, M6, M8, M10, M12 Technical data: Control voltage 230V/10A Connector plug HAN 10, not wired Temperature ranges: Transport: - 20°C to + 60°C Operation: + 10°C to + 40°C Storage: - 20°C to + 50°C Compressed air connection: Operating pressure: 6 bar Quality: Conditioned, water-free and and unlubricated air Connection: 1⁄2" connection thread Knedpfx Aaetgik Rjcsc Machine dimensions: Length (L): approx. 824 mm / Height (H): approx. 1800 mm / Width (W): approx. 600 mm Values apply to a working height (AH) of 1000 mm. Pneumatics: Standard: Manufacturer SMC Variant: Manufacturer FESTO Control system: Standard: Manufacturer B & R Variant: Manufacturer Siemens Machine type C-frame A220-PD Continuous sound pressure level (LpA) 78 dB Operating modes: The operating modes can be changed in the control panel. Automatic mode: The fasteners are pressed in automatically. Movements are only triggered when the operator presses the foot pedal and triggers the pressing process. Manual mode: In manual mode, adjustments are made to the machine. In this operating mode, movements can be activated individually. Weight: Approx. 600 kg Condition: Used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Year of construction: 2011, Operational condition. Kjdpfx Ajxdz Tdsacsnc

Condition: used, Year of construction: 2007, Linea Twin Machine Multi Pallet Production Machining Centre, Includes (2) x Linea Prima Twin Pallet Horizontal Machining Centres with GE Fanuc Series 16i-MB CNC Control, Pallet Size 1000mm x 800mm, CAT50 Spindle Taper, 309 Tool ATC, Linea 16 Pallet Robotic Loading System with GE Fanuc Power Mate CNC Control, (2) x Change Over Stations, Coolant Filtration. S/No. M1 359-07 (2007), M2 353-07 (2007) - CE Mark Kodpfxjxdbuns Aaconc Please Note: Dismantling and Loading will be carried out by our own supplier Please Note: These lots are located in Ferrara, Italy. All/Any tooling is being offered as specifically described.

Condition: excellent (used), Year of construction: 2018, Extremely fast and precise inspection for high-volume production Z resolution 0.5 µm Z range Up to 30 mm (1.2") Angled view cameras Knedjwkfuuspfx Aacec Number of megapixel cameras 8 Orthogonal camera Resolution 10 µm Field of view 50mm x 50mm (2" x 2") Inspection speed Up to 65 cm2/s Software User interface Viscom vVision/EasyPro SPC Viscom SPC (statistical process control), open interface (optional) Verification station Viscom vVerify/HARAN Remote diagnosis Viscom SRC (software remote control) (optional) Programming station Viscom PST34 (optional) System computer Operating system Windows® Processor Intel® Core™ i7 PCB handling PCB dimensions 508 mm x 508 mm (20" x 20") Transport height 850 - 950 mm ± 20 mm (33.5" - 37.4" ± 0.8") Width adjustment Automatic Transport type Single track transport PCB clamping Pneumatic Upper transport clearance 50 mm (2") Lower transport clearance 45 mm (1.8"), up to 85 mm (3.3") optional; 40mm (1.6") with PCB support Other system data Positioning/handling unit Synchronous linear motors Interfaces SMEMA Power requirements 400 V (other voltages on request), 3P/N/PE, 8 A, 4 - 6 bar working pressure System dimensions 994 mm x 1565 mm x 1349 mm (39.1" x 61.6" x 53.1") (W x H x D) Weight 720 kg (1587 lbs

Condition: ready for operation (used), Year of construction: 2022, An assembly line (workpiece carrier assembly system) item Bayern GmbH for loading, assembly, and (return) transport of workpiece carriers with two Deprag screwdrivers is available. Assembly principle: Karakuri (non-driven material flow principle), max. load: 30kg, max. stroke: 2630mm, max. speed: 1.63m/s. Assembly station dimensions X/Y/Z: approx. 12850mm/3350mm/2950mm, weight: approx. 1600kg, lift system dimensions X/Y/Z: approx. 9700mm/3350mm/1600mm, weight: approx. 400kg, control: item C3-05. The system is modularly adjustable at any time and complies with standardized industrial standards. Documentation available. An on-site inspection is possible. The system is dismantled. Ksdsw Dfhnopfx Aacjnc

Condition: used, Handling device, handling system JÄGER HANDLING Manipulator for screwing technology Type: Handy-flex 200 horizontal movement: 300 mm vertical movement: 370 mm Load capacity: 10 to 14 kg Projection: 250 to 550 mm guide column vertical: Ø 25 mm Guide columns horizontal: Ø 16 mm tool holder: Ø 26 mm oval with screw clamping - Movable in three axes (horizontal, vertical, rotary) - 1 piece Balancer for vertical movement TECHNA, type 9340, adjustment range 10 to 14 kg - adjustable latch for vertical movement, manual release via Bowden cable - for weightless suspension of small appliances - Load capacity adjustable - constant attraction Space requirement L x W x H: 880 x 500 x 1120 mm Ksdpsfx Hxzsfx Aaconc Own weight: 23 kg sound condition

Condition: new, functionality: fully functional, machine/vehicle number: 308514, overall weight: 112 kg, The Tünkers Spanner KS 200.4 BDA03LHT12 is a high-precision pneumatic clamping system developed for automation technology. With its robust design and innovative technology, this clamp offers a reliable solution for fixing workpieces in assembly and manufacturing processes. Thanks to its compact design, the KS 200.4 can be easily integrated into various machines while ensuring high clamping force and repeatability. The easy handling and maintenance make it an ideal choice for industrial applications where efficiency and precision are crucial. Whether in the automotive industry, mechanical engineering or electronics manufacturing - the Tünkers Spanner KS 200.4 BDA03LHT12 impresses with its versatility and performance, making a valuable contribution to optimizing your production processes. Knsdpfjvn Sdfox Aacjc

Condition: used, Year of construction: 2019, Working condition and in standard configuration! Location within EU. Knsdpfsxlzwxex Aacsc Ask for additional details!

Condition: used, Year of construction: 2007, functionality: fully functional, Pick and place machine working condition, readily available in our store for a buget price. Kjdpfxova Ecrj Aacjnc

Condition: used, Electric dual screwdriver unit with automatic feed and pneumatic double stroke, mounted on handling device, handling system, manipulator for screwdriving technology. Screwdriving Unit: BÖLLHOFF / BOSCH REXROTH Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual screwdriver unit features a pneumatic double stroke via Festo valves and cylinders. Various monitoring systems are installed to enable full automation. Screwdriver 1 consists of the following components: - Rexroth type servomotor - Rexroth type 0 planetary gearbox - Rexroth type 0 encoder - Rexroth type 0 straight drive head Screwdriver 2 consists of the following components: - Rexroth type servomotor - Rexroth type 0 planetary gearbox - Rexroth type 0 encoder - Rexroth type 0 offset drive head Dimensions (WxHxD): 165 x 1000 x 200 mm Pneumatic long stroke: 30 mm Pneumatic short stroke: 20 mm Screwdriver spring travel: 20 mm Last screws used: M6 x 15 mm Electric screwdriver unit Rexroth Servomotor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm/A Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current draw: max. 7 A Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material No.: 0 Efficiency: 90% Reduction ratio: i=18.9 Max. torque: 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material No.: 0 Nominal torque: 12 Nm Reduction: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Straight drive head Rexroth Type: 2GA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction: 1 Weight: 0.2 kg Installation length: 90 mm Offset drive head Rexroth Type: 2VNA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction: 1 Weight: 0.6 kg Installation length: 153 mm Handling system: JÄGER HANDLING Type: Handy-flex 300 Horizontal movement: 400 mm Vertical movement: 450 mm Load capacity: max. 14 kg Handyflex reach: 250 to 650 mm Handyflex reach (swung out): max. 860 mm Swivel radius at full extension: max. 360° Guide column vertical: Ø 30 mm Guide columns horizontal: Ø 20 mm - Balancer for vertical movement - Adjustable load capacity - Adjustable stop for limiting swivel radius Dimensions (L x W x H): approx. 1150 x 650 x 1400 mm Kodpfjfx Hyfsx Aacenc Total weight: approx. 90 kg Good condition Without the blue steel pallet as base plate Blue steel base plate is not included in the scope of delivery.

Condition: used, Year of construction: 2017, Operational condition SPI machine. Kodpfx Aaew Ty Rbecjnc Ask for specification!

Condition: ready for operation (used), Year of construction: 2021, Oven in good working condition! Kodpfx Aaew Sab Dscsnc Ask for additional information!

Condition: ready for operation (used), Year of construction: 2020, Working condition and comes with following feeders: Knedpfxow Sabdj Aacsc 8mm 2mm pitch -6 pieces 8mm 4mm pitch -32 pieces 12mm -4 pieces 16mm-3 pieces 24mm-2 pieces 8mm electrical -8 pieces Stick feeder 1

Condition: used, Year of construction: 2005, Operational condition. Kodpfjxd Ad Rox Aacenc

Condition: used, Year of construction: 2008, Machine is from 2008 and is the 12 head version. The machine has 1 problem, the X motor is running at 60%, it has an issue. Machine is being used daily in production until today. If any Feeders/Trolleys available and included are still to be confirmed. Maintenance done by OEM representative. Knedpsw Rfcksfx Aacoc