Used Isostatic Pressing for sale (10,140)

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed Fpjdpfxsx A U Ncs Ag Rob • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test.

Condition: good (used), Crimping pliers, crimping pliers, cable lug pliers, mechanical crimping pliers, pressing jaws, pressing tool for cable end sleeves, wire end sleeves, cable lugs, hand crimping pliers, sleeve pliers, clamp sleeve pliers -Manufacturer: Klauke, hand crimping pliers type K05 -Crimping: of cable lugs and cable connectors -Standard version: 6 - 50 mm -Dimensions: 390/140/H50 mm -Weight: 1.1 kg Fpodpfx Aowup Efog Reb

Condition: used, Pressing screw REG-MAC for drying films and fibers, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw Fpodpfx Agsxgtd He Rjb

Condition: ready for operation (used), For sale: a very solid and fully operational Constantin Hang 150-06, the industry standard for press-fitting and crimping ring binder mechanisms onto folders, binders, and covers. Specifications and features: • Suitable for 2-ring and 4-ring mechanisms • Powerful mechanical eccentric press • Very robust German construction (cast iron) • Foot pedal operation for safe and fast working • Complete and ready for immediate use • Machine presses and crimps the legs of the ring mechanism in a single operation • Ideal for binderies, file manufacturers, and office supply production Currently set up for 2-ring mechanisms (80 mm), but can be easily adjusted for other mechanisms. Technical data: • Manufacturer: Constantin Hang • Model: 150-06 • Serial number: 102160 • Country of origin: Germany Condition: Good, clean, and working condition. Can be demonstrated immediately. Fpsdpfxjx A Ivve Ag Rob

Condition: like new (used), Automatic pressing line (short cycle), useful to apply veneer, paper or laminates, composed of: V03022) Loader (Portal) "SAG" Double-station (of pick-up) with central motorized rollers table Fedpfx Agsdun Nio Ropb V03023) Brushing machine (to top and bottom clean the panels) "POLIMA"  V03024) Glue Spreader "OMMA" V03025) Motorized Conveyoring Disks way "OMMA" V03026) Preparing table for the panels and motorized in-feed carpet to the press "SIMI" V03027) Short cycle hot hydraulic Press "SIMI IMPIANTI" mm 1400 x 4500, with No. 10 pressing cylinders V03028) Unloader-stacker (Portal) "SAG" Double-station (of storage) with central motorized rollers table

Condition: used, Year of construction: 2023, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 178, type of input current: AC, total width: 2,000 mm, total length: 4,000 mm, total height: 2,000 mm, overall weight: 1,100 kg, power of the servo motor: 13 W, hopper volume: 500 l, input voltage: 400 V, For technical details please contact manufactorer SRAML Slovenia Fsdpfx Agex E N Uns Rspb Products: The Belt Press has been used for the pressing of apples, other fruits, and elderflowers

Year of construction: 1997, condition: used, Double trough pre-pressing screw Fodpfx Agstppmzj Rjpb Trough approx. 2,800 x 660 mm Screw diameter approx. 370 mm 2-cylinder solids pump SP 2180-400 with distribution station and 55 kW hydraulic unit

Condition: good (used), Pressing pliers, pressing machine, pressing jaws, pressing tools, pressing rings Fsdpfx Agjvmhaas Rspb -Manufacturer: Roller, pressing pliers pressing jaws pressing rings set -Sizes: M15, M22, M28, Z1 -Individual components: see photos -Dimensions case: 410/220/H65 mm -Weight: 4.7 kg

Condition: good (used), Year of construction: 2001, Extruding pressing line for soybean, Instapro, made in 2001, consisted of 2 extruders, 2 presses, original AMA automatic filtration for oil, and cooler for the cake. Fpsdjxuahbopfx Ag Reb Capacity is up to 1.200kg/h.

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, overall weight: 250 kg, Cross Slide – Support Type PS 30 Support suitable for hand-operated press machines with 300 mm center height Technical Data Longitudinal slide travel: 220 mm Cross slide travel: 120 mm Height: 230 mm Rotary table diameter: 200 mm Shear length: 550 mm Weight approx.: 250 kg Machine Description - Technically inspected and ready for operation - Robust cast iron construction - Adjustable dovetail guides Fodpfsxp Sd Rex Ag Rspb - Trapezoidal spindle for longitudinal and cross slide - Large handwheels

Condition: ready for operation (used), Technical characteristics 1 automatic feeder 4m 1 brush FRIZ BUE 396 1 OSAMA SV4/350-1800 7335 gluing machine 1 motorized preparation table Fjdpottdnljfx Ag Rspb 1 WEMHONER VSF 3600mm/1800mm hot water plating press 5971071 1 automatic stacker with pneumatic gripping Power and Motors Overall dimensions

Condition: ready for operation (used), Year of construction: 2000, operating hours: 32,769 h, functionality: fully functional, machine/vehicle number: H/7529, pressing force: 500 t, table width: 2,400 mm, table length: 1,300 mm, stroke length: 800 mm, TECHNICAL DETAILS Press force: 500 t Table area: 2,400 x 1,300 mm Pedal area: 2,400 x 1,300 mm Stroke: 800 mm Max. stroke length: 830 mm Control system: Siemens S7-400 Installation height: 400 mm/min Working speed: 25 - 60 mm/s Closing speed: 500 mm/s Rapid traverse up: 450 mm/s Mold base area: min. 1,400 x 900 mm Mold base area: max. 2,300 x 1,200 mm Mold weight: max. 3,000 kg MACHINE DETAILS Weight: 83,000 kg Power: 255 kW Rated current: 435 A Voltage: 400 V Frequency: 50 Hz Hydraulic pressure: 255 bar Fpedpfxjwa S R Ie Ag Rob Oil volume: 3700 l

Year of construction: 1993, condition: excellent (used), machine/vehicle number: 32781, Size: 300 x 560 mm Speed: 44.000 c/h Fjdpfx Agohncafe Rjpb

Condition: good (used), pressing tool, sheet metal former, forming tool, ball forming tool -Pressing tool: ball forming tool -Radius: 50.11 mm -Hole: Ø 40 mm -Dimensions: Ø 165 x 270 mm Fjdpfevmx T Dsx Ag Ropb -Weight: 18.4 kg

Year of construction: 2007, condition: good (used), functionality: fully functional, We are offering pressing line for rapeseed/sunflower with prepress (FS1000 55kw), final press (FS1000 45kw) and full automatic filtration for oil, 10m2. It is made for double cold pressing, which is low energy consuming and completely natural, providing the oil without necessity for degumming, because phosphorus content is low. After that full automatic filtration will remove cake residues from oil, which can be safely stored without any damage. Fpedpfxoxuafye Ag Rob Capacity of the line 1.400kg/h, 32t/24h

Condition: excellent (used), Year of construction: 2023, Pressing Lines for automatic multi-(2-3)-layer parquet production. Fpedpfx Aeggflcsg Rsb

Condition: used, Spreading and pressing device with hydraulic unit WEBER type E45 / 59600.0 High-pressure unit + hydraulic spreader pliers, hydraulic spreader Fpedpfxodzp S Rj Ag Reb Year of manufacture 1988 / 1986 Hydraulic unit type E45 / 59600.0 Maximum operating pressure: 630 bar Flow rate: approx. 2 l/min Tank capacity: approx. 10 liters Spreader device - pliers WEBER type SP30 / 059 198.0 Reach (arm length): 340 mm Maximum spread distance: 810 mm Maximum spreading force in working range: 132 kN Closing force: 99 kN - Twin hose with quick-connect coupling Rated power: 0.9 kW Power supply: 220 Volt, 50 Hz Weight of hydraulic unit: approx. 40 kg Weight of spreader device: approx. 25 kg Very good condition Hydraulic rescue set for fire brigades with hydraulic power unit and a spreader. The spreader is used to create rescue openings after traffic accidents by spreading apart structures. Also suitable for compressing or lifting loads. Versatile in use due to the multifunctional design of the spreader jaws, made of drop-forged and hardened steel.

Condition: new, Year of construction: 2024, functionality: fully functional, Thrust press system Push and pull force: 24/30 t Hydraulic station 50 m boom Expanders: 80/132/160/200 mm Without locating device Fpodpfeuy N H Esx Ag Rob Price: €25,000.00 net Dry drilling: no bentonite used, no bentonite disposal

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Equipment: compressor, STC-Ref:G-012-3707 MBO T800 - 6/4, Year: 1999 format: 820x1150 mm equipped: - delivery - with integrated pressing device - noise hoods - pressing station in delivery DESTA - Control system MC-control Fpjdpfx Asuta S Rog Rob - compressor - batch counter - MBO counter - NEW rollers in 2012 - type: MBO T-800-6/4 - Delivery DESTA - rotary feeder /continous feeder R-800 - 1st folding unit: 6 buckle plates - 2nd folding unit: 4 buckle plates - knife shaft at cross fold

Condition: good (used), Pressing pliers, pressing machine, pressing jaws, pressing tool -Manufacturer: Roller, press machine type 5788001 with accessories -Pressing pliers: size M15, M18, M22, M28 -Accessories: see photos Fpjdpsvmha Tefx Ag Rob -Dimensions case: 510/300/H120 mm -Weight: 11.7 kg

Condition: used, Year of construction: 1987, machine/vehicle number: 33879, Stehendbogenauslage - Horizontal Stack Delivery with Pressing Stahl SBP 46Year 1987 - Serial-No. 33879/87-134584 Fpsdpfx Ash Aygfeg Rob Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: good (used), pressing pliers, crimping pliers, cable lug pliers, hydraulic crimping pliers -Manufacturer: Orsta, hydraulic pressing tongs -Use: for large cable lugs -Hydraulic connection: see photo Fpodefnk I Eepfx Ag Reb -Dimensions: Ø 118 x 315 mm -Weight: 11.2 kg

Condition: used, Year of construction: 1999, machine/vehicle number: 990418402, Schuppenauslage mit integrierter Presse / Stream delivery with integrated pressing MBO ASP 82 - 2 MEBaujahr / Year 1999 - Serial-No. 990418402 Arbeitsbreite / Working width max. 820mm Geschwindigkeit / Speed min. 30m/min. - max. 160m/min. Einlaufhöhe / Infeed high min. 400mm - max. 950mm Stream delivery with integrated pressing rollersBeschreibung / Description: Fahrbar / Mobile Built-in controller Spreizen von Mehrfachnutzenströmen / Spreading Fpodpfx Agjih Nl Re Rjb Marking by 2 cm shifting Light barrier and counter ASP 82-2 ME extension to four-up production Integrierte Presse / Integrated pressing station Kontinuierlicher Schuppenstrom / Continuous stream delivery Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: good (used), pressing pliers, crimping pliers, cable lug pliers, hydraulic crimping pliers Fpodjvu Sqxopfx Ag Rsb -Manufacturer: Orsta, hydraulic pressing tongs -Use: for large cable lugs -Hydraulic connection: see photo -Dimensions: Ø 120 x 330 mm -Weight: 11.4 kg

Condition: good (used), Crimping pliers, crimping pliers, cable lug pliers, mechanical crimping pliers, pressing jaws, pressing tool for cable end sleeves, wire end sleeves, cable lugs, hand crimping pliers, sleeve pliers, clamp sleeve pliers -Manufacturer: WMW, hand crimping pliers type PH 2.5C -Crimping: of cable lugs and cable connectors -Pressing force: 25.0 N -Pressing stroke: 15 mm -Transport case: incl. accessories, see photo -Quantity: 1x crimping pliers available -Price: per piece Fjdpfeb A S Uvsx Ag Rspb -Dimensions of pliers: 600/180/H25 mm -Total weight: 3.2 kg