Used Gluing presses for sale (97)

Year of construction: 1998, condition: excellent (used), Press with working dimensions 4.5m X 1.9m Kedpfolzi S Nsx Aacsdu

Condition: excellent (used), Year of construction: 2022, High frequency panel Press Orma Model LS ECO 25/13 Year of production: 2022 Technical condition: very good Kdjdpev Ayftjfx Aacju Manufacturer: Orma Macchine – Italy Work Table and Feed System: • Work dimensions: 2500x1300 mm, 3.25 m² • Mechanical pusher: length 2500 mm, used for advancing pieces into the press; fixed pushing speed; pushing bars operated by a chain system • Limit switch for stopping the press at the end of the work table • 1 foot pedal for moving pieces on the work table • 1 emergency stop button _____ Hydraulic Press Model LS/ECO: • High-frequency platens, dimensions: 2500x1300 mm • Mobile lower platen • Vertical pressing system: o 4 vertical pressing pistons with a diameter of 70 mm, maximum total force of 40 tons, stroke/opening: 150 mm • Horizontal pressing unit: o Consists of 5 double-acting pistons with a diameter of 40/25 mm that operate 5 steel pressing plates; stroke/opening: 150 mm o Maximum total force: 7.5 tons o Pistons can be activated via a special device to reduce the pressing area • Rear vertical pressing unit: o Used to fix the last pieces and contrast the lateral horizontal pressing unit, consisting of a steel bar (2500x150 mm) o Actuated by 3 vertical pistons with a 70 mm diameter, total maximum force: 30 tons, stroke: 150 mm • Side pressing unit and rear clamping device: o Allows the production of pieces with unlimited length • Two working cycles: o Manual or automatic, selected by pressing a button o Special cycle for adjusting after pressing • Independent pressing units: o Each of the three hydraulic units has an independent pressure setting • Single hydraulic circuit: o Uses the same oil reservoir o Total power: 5 HP • Main control panel equipped with all command options (PLC included) for press operation • Press structure made of welded steel bars and profiles _____ Evacuation System: • Working dimensions: 2500x1300 mm • Mounted at the rear of the press on the mobile pressing unit • Gravity unloading system with triangular profile elements _____ INCLUDED: a. High-Frequency Generator • 20 kW high-frequency generator • Adjustable to five frequency positions, allowing the generator to be used based on the type of operation • Silicon diode bridge for constant efficiency • Fully equipped with all components for connection to the press • Press platens made of insulating materials, covered with aluminum plates to allow high-frequency transmission o Aluminum coating functions as positive and negative poles (upper and lower platen) b. Stainless steel platen coating c. Height adjustment for side steel pressing plates d. Additional thickness for the side pressing plates We offer professional dismantling, loading, installation, commissioning, and training on machine operation. We also provide ongoing maintenance services and access to spare parts.

Condition: excellent (used), Year of construction: 2004, working dimensions 2800x1100mm 3 working areas manual rotation Kedew Ad Tyjpfx Aacjdu 6 pneumatic pistons/working area 3 frontal keepers / area year 2004

Condition: like new (used), • condition - used, after inspection • manufacturer - ORMA • model - C4 • shelves measuring 250 x 120 cm • max. clearance between shelves 490 mm • shelves straight, clean, without dents/damage • 4 pistons with a diameter of 55 mm • max. pressure 150 bar • pump motor 1.1 kW • gluing time stopwatch Kdjdpfx Aaewlwr Ioceu • shelves heated with liquid • possibility of switching on and checking the device on site

Condition: excellent (used), Hydraulic assembly press Italprasse Program/30 for door and window joinery The Italpresse Program/30 machine is a hydraulic vertical press designed for precise assembly and gluing of wooden elements, such as window and door frames and furniture bodies. Thanks to its design, it allows for precise fitting and permanent connection of components, which is crucial in the production of door and furniture joinery. Technical specifications •Maximum working dimensions: 3000 × 1700 mm •Stroke of vertical cylinders: 800 mm •Stroke of horizontal cylinders: 1200 mm •Adjustable lower beam: can be set in three positions •Hydraulic cylinders: Ksdpfx Ajwkf Stsacedu •2 vertical (Ø 100/60 mm) •2 horizontal for setting frames (Ø 50/35 mm) •Power of hydraulic unit: 2.2 kW •Overall dimensions: 3600 × 1000 × 2650 mm •Weight: approx. 1200 kg Application Italpresse Program/30 is ideal for: •Gluing and assembling window and door frames •Assembling furniture bodies •Assembling wooden panels and other construction joinery elements

Condition: excellent (used), Year of construction: 2010, I sell the complete line for production of solid wood panels. Manufacturer: KALLESOE MACHINERY AS Kedpjw Anc Eofx Aacedu Modell: LHF6114 + KL30 + STACKER Maximum possible input length: 1800mm Press width maximum 525mm (useful between appr. 480-520mm) Minimum and maximum slat width: max. 35mm x 80mm and 16mm x 100mm Glue: Danafix 446 Maximum possible output length: 1800 mm - 6000 mm Available immediately. Possible to test.

Year of construction: 2000, condition: excellent (used), Please contact us for more information Kjdsk Nn Ilopfx Aacedu

Condition: as good as new (ex-display), overall weight: 900 kg, working length: 2,400 mm, working width: 1,000 mm, space requirement width: 3,500 mm, space requirement length: 3,500 mm, product height (max.): 90 mm, compressed air connection: 12 bar, We sell 6 deck press for width gluing of wood, gluing dimensions 2400 x1000 x 90 mm, manual turning New, in stock, immediate delivery Kdsdpfx Ajt Agh Deacsu

Condition: ready for operation (used), plate length 121cm plate width in widest place 112cm span between plates 30cm pump motor power 1,5kW Kdsdotq Hmqjpfx Aaceu piston diameter 156mm dimensions: length 183cm width 95cm height 188cm

Condition: good (used), Year of construction: 1992, SCHROEDER mosaic press 160mm. Bonding patterns: line: Kdsdpor Iyrmsfx Aacou - square plate 640x320 mm - parallel parallel plate 640x320 mm

Condition: excellent (used), Self-loading press for gluing Orma LS/ECO/CA 30/13 Working length 3000mm Working width 1300mm Automatic material loading Glue application system Shelves heated with oil to 130C Kjdpsv Nhx Usfx Aacjdu Top pressure force 57t Side pressure force 9t Year of production 2001 CE certificate

Condition: ready for operation (used), A line for joining boards by length, consisting of: a saw for cutting out defects in boards marked with chalk, a micro-joint milling machine for boards with a maximum width of 23 cm, thicknesses from 1 cm to 12 cm, a press for joining, a saw for forming lengths. Kedpfxev Hhi Uo Aacsdu Total length of the line about 40 m. The machine is functional and ready to work. Possibility of dismantling and loading onto a truck.

Year of construction: 2002, condition: excellent (used), Machine used for disassembly in very good condition. Ksdpfx Aaohq Dcyecedu We can also offer a disassembly and assembly service as well as technical inspection.

Condition: excellent (used), Year of construction: 2012, I sell the complete line for production of solid wood panels. Manufacturer: KALLESOE MACHINERY AS Modell: LHF6114 + KL30 Maximum possible input length: 1800mm Press width maximum 525mm (useful between appr. 480-520mm) Minimum and maximum slat width: max. 35mm x 80mm and 16mm x 100mm Glue: Danafix 446 Maximum possible output length: 1800 mm - 6000 mm Kodpfx Aaovw Eh Necjdu Available immediately. Possible to test.

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1855680, pressing force: 80 t, input frequency: 50 Hz, power: 4 kW (5.44 HP), table length: 1,400 mm, table width: 800 mm, operating pressure: 270 bar, Manufacturer: Joos Model: HP-S 80 Kjdpfx Aaorp D Eajcjdu Year of Manufacture: 2004 Pressing Power: 800 kN Three-Piston Suitable for woodworking and industrial applications Well-maintained and in good working condition Previously used in a company setting, reliable and durable. Despite the dust, this Hydraulic Press continues to deliver reliable performance. Contact us today to arrange a viewing or to inquire further information.

Condition: excellent (used), Year of construction: 2022, Plate length - 2100 mm Plate width 1100 mm Kdjdswgl A Ropfx Aacju Press opening - 250 mm Pressure force - 90 t Number of cylinders - 6 Max working temperature - 120 °C Cylinder diameter70 mm Heating plates Thermal oil Press with pistons at the bottom Side pressure cylinder - 4 Total connection power - 21 kW Excellent technical condition

Condition: used, Year of construction: 2020, machine/vehicle number: 8613.27, working length: 2,500 mm, working width: 1,350 mm, product height (max.): 33 mm, Weinig Profipress L II 2500 Comfort press The set includes: loading station glue application station stacking station, possibility of stacking in two rows Kdjdpfxewc Stuo Aacou Press Unloading conveyor Max. element size 2500*1350*33mm Generator power 25 kw The machine has been working in the plant since 01.2023 Net price given

Condition: used, Year of construction: 2008, functionality: fully functional, Pneumatska Presa za sirinski lepljenje.Maksimalne dimenzije lepljenja 5000x1300 mm.Presa se rotira i ima dve etaze. Na prodaju su dve identicne prese. Stanje odlicno. Kdsdpfxjwptqnj Aacsu

Year of construction: 2008, condition: excellent (used), I sell the press for glulam glued massive wood LISY DVORAK TH6, year 2008. Material size 2600 X 1050 x 50mm 6 working areas, manual rotation. 6 pcs hydraulic cross pressures per 1 area / pomp 1,1 KW 6 pcs manual pressures per 1 area Kodpfx Aeh Txl Ijacjdu Self weight 1350kg. Very good condition. Available immediately.

Year of construction: 2009, condition: excellent (used), I sell the press for glulam glued massive wood DRESOMET 4N, year 2009. Material size 2800 X 800 x 60mm 4 working areas, manual rotation. 9 pcs pneumatic cross pressures per 1 area 9 pcs pneumatic pressures per 1 area Kdedpfx Aasnxpabsceu Self weight 1300kg. Very good condition. Available immediately.

Year of construction: 2010, condition: excellent (used), I sell the complete line for production of solid wood panels. Product size max. 2600X2100mm Complete line consists of: 6-spindle Weinig Unimat fourside moulder Cross chain conveyor Automatic Glue spreading unit with cycle programming Kodpfx Asg D Uuqeacsdu Entry table before the press Italpresse GB/13 Super Press size 2600mm (Parallel dimension / element length) x 2100mm (Cross dimension / Working width) Output table with rollers and cross chain outfeed conveyor Available as a complete line or sellable also separately. Because of that, the price is on agreement. Available immediately. Possible to test. Suitable also for another jobs. Products like parquettes, floor inputs, etc.

Year of construction: 2008, condition: excellent (used), I sell the press for glulam glued massive wood LISY DVORAK TH6, year 2008. Material size 3000 X 1250 x 50mm 6 working areas, manual rotation. 6 pcs hydraulic cross pressures per 1 area / pomp 1,1 KW 6 pcs manual pressures per 1 area Self weight 1200kg. Glue spreading machine LISY DVORAK NL200 included in price. Kedpfxskd Drhs Aacedu Very good condition. Available immediately.