Used Hydraulic Frame Press for sale (29,606)

Year of construction: 2003, condition: used, frame hydraulic press WEGOMA Hedjcmat Uopfx Aalefd Workspace: width 3600 mm height 2500 mm the amount of lateral hydraulic cylinders 3 pieces top two pieces beam mechanically Move Mechanical compression setting more photos an questions

Condition: good (used), Electro-hydraulic frame press Manufacturer: Hess Model: Hydro Nummer 1 1.1 kW Press dimensions: max. 3550 x 2550 mm The machine is in good condition. Hodpfx Aajyux Uuelsfd

Condition: used, Year of construction: 1999, functionality: fully functional, total length: 8,120 mm, total height: 2,300 mm, Vertical Hydraulic Press FAMAD HSKG 6m Hsdpoyuylnsfx Aalofd – Number of loading zones: 3 Dimensions of a single loading zone: – Loading height: 1140 mm – Length of battens in one zone: 1530 mm – Maximum batten width: 150 mm – Maximum length of glued elements: 3120 mm – Installed power: 3 kW – Number of cylinders per zone: - 3 pcs 50x100 mm - 3 pcs 80x100 mm – External dimensions (L x W x H): 8120x1000x2300 mm – Machine weight: 4800 kg

Condition: used, Single column hydraulic press DUNKES type HZT 2,5 Machine No. H94-2558 Year of construction 1994 pressure force 2,5 ton. throat 180 mm table area 420 x 300 mm drop-through opening in table 60 x 185 mm ram surface Ø 40 mm clamping spigot bore Ø 20 mm ram stroke 160 mm Installation height max. 250 mm Rapid traverse downward 65 mm/sec. Rapid traverse upwards 160 mm/sec. Working speed 8,3 mm/sec. Table height above floor 950 mm Hydraulic operating pressure 135 bar Hfsdpfjh Uhqyjx Aalod Tank capacity hydraulics approx. 100 liters Drive power 1,5 kW Mains connection 400 Volt, 50 Hz - Installation height can be increased by shortening the piston rod by 80 mm - Pressure and travel cut-off - 2-hand operation at the machine - stroke counter - safe press control with 2 monitored hydraulic valves - UVV 11.064 VGB 7.n.5.2 (for manual insertion work) - 32047 read off operating hours - Electrical circuit diagram and hydraulic diagram available space requirement L x W x H 1100 x 980 x 1950 mm weight 700 kg very good condition

Condition: used, Single-column hydraulic press HYDRAP type HPSK 25 No. 6312 Year of construction 1989 Pressure force 25 ton. Ram stroke 500 mm throat depth 300 mm Installation height 700 mm Table surface 1000 x 500 mm Table bore Ø 210 mm Plunger surface 400 x 360 mm Clamping pin bore Ø 40 mm Table height above floor 855 mm Hfsdpfx Aashrakvslod Feed speed in rapid traverse 280 mm/sec. Pressing speed 3.5 mm/sec. to 25 mm/sec. Return speed 280 mm/sec. Hydraulic tank capacity 240 liters Drive power 7.5 kW Mains connection 400 Volt, 50 Hz. - Operation and programming via SIEMENS S5 with OP1 control system - Measuring system for stroke adjustment - Pressing speed infinitely variable via potentiometer - Pressure setting infinitely adjustable manually via pressure regulator - Short stroke device - Mechanical tool clamping on ram with T-slots and clamping pin hole - Switch cabinet with electrical control on the machine - Two-hand operation and electrical connection for foot control - Control provided for electrical mold monitoring - Hydraulic diagram and electrical diagram available Space requirement L x W x H 1800 x 1200 x 2930 mm Weight approx. 4 tons good condition

Condition: used, Year of construction: 2003, Working height: 2300 mm, Working width: 3500 mm, Motor: 1.5 kW, 3 pressure cylinders from above, 2 from the side, Pressure per cylinder: 3000 kg, Cylinder stroke: up to 200 mm, Hydraulics: 10-150 bar, Space required: 3950 x 900 x 2550 mm, Weight: 670 kg Storage location: Nattheim Hfedpfxovvkmbe Aaled

Year of construction: 2024, condition: ready for operation (used), Max. pressing force: 400kN, max. retraction force: 30kN, piston stroke: 400mm, pressing speed low pressure/high pressure: 9mm/s, return speed: 13mm/s, max. installation height: 600mm, throat depth: 300mm, front support: 150mm, table height: 900mm, frame width: 250mm, drive power: 4kW, length: 1200mm, width: 695mm, height: 2300mm, weight: approx. 1t. The press is still in its original packaging and unused, with accessories. An on-site inspection is possible, not under power. Hjdpoylbr Refx Aaljfd

Condition: new, functionality: fully functional, Year of construction: 2026, input voltage: 400 V, Hydraulic C-Frame Press Our hydraulic C-frame press is a professional machine designed for precise and demanding machining operations. Thanks to its C-frame construction, it provides easy access to the working area, allowing the processing of larger components and convenient handling of material from different sides. Key Features High pressing force – ideal for bending, straightening, pressing, and assembling components. C-frame construction – improved ergonomics and excellent accessibility to the working area. Solid steel frame – ensures durability and safe operation. Precise hydraulic control – smooth adjustment of force and operating speed. Industrial and workshop applications – perfect for both large manufacturing plants and smaller workshops. Thanks to its versatility and robust construction, this press is suitable for many industries, from automotive and metalworking to technical service centers and tool shops. Specifications Pressing force: 250 kN (approx. 25.5 tons) Maximum pressure: 25 MPa Maximum opening: 500 mm Stroke: 200 mm Table dimensions: 500 × 400 mm Throat depth: 200 mm Downward speed: 10 mm/s Hodpfx Aasyr Ek Roljfd Return speed: 14 mm/s Motor power: 3 kW

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PRASA HYDRAULICZNA TYPU C HPW 50 50 TON, pressing force: 51 t, table width: 400 mm, table length: 500 mm, stroke length: 200 mm, input voltage: 400 V, pressing speed: 18 mm/s, Hydraulic C-Frame Press Our hydraulic C-frame press is a professional machine designed for precise and demanding machining operations. Thanks to its C-frame construction, it provides easy access to the working area, allowing the processing of larger components and convenient handling of material from different sides. Key Features High pressing force – ideal for bending, straightening, pressing, and assembling components. C-frame construction – improved ergonomics and excellent accessibility to the working area. Solid steel frame – ensures durability and safe operation. Precise hydraulic control – smooth adjustment of force and operating speed. Industrial and workshop applications – perfect for both large manufacturing plants and smaller workshops. Thanks to its versatility and robust construction, this press is suitable for many industries, from automotive and metalworking to technical service centers and tool shops. Hfsdpfsyr D R Nox Aalod Specifications Pressing force: 500 kN (approx. 51 tons) Maximum pressure: 25 MPa Maximum opening: 500 mm Stroke: 200 mm Table dimensions: 500 × 400 mm Throat depth: 200 mm Downward speed: 19 mm/s Return speed: 18 mm/s Motor power: 4 kW

Year of construction: 2001, condition: used, Max. pressure: 500t, max. operational temperature: 370°C, oil heated, oil cooled, with a secondary cycle for recirculation of heating output, was overhauled in 2014. Hfsdpfx Aaodwf Dbjled

Condition: new, functionality: fully functional, Year of construction: 2026, input voltage: 400 V, Hydraulic C-Frame Press Hfsdpfx Aaeyrr Rkelod Our hydraulic C-frame press is a professional machine designed for precise and demanding machining operations. Thanks to its C-frame construction, it provides easy access to the working area, allowing the machining of larger components and convenient handling of materials from different sides. Key Features High pressing force – ideal for bending, straightening, pressing, and assembling components. C-frame construction – improved ergonomics and better access to the working area. Solid steel frame – ensures durability and operational safety. Precise hydraulic control – smooth adjustment of force and operating speed. Industrial and workshop applications – suitable for both large manufacturing plants and smaller workshops. Thanks to its versatility and robust construction, this press is suitable for many industries, from automotive and metalworking to technical service centers and tool shops. Specifications Pressing force: 1000 kN (approx. 102 tons) Maximum pressure: 25 MPa Maximum opening: 600 mm Stroke: 300 mm Table dimensions: 700 × 500 mm Throat depth: 250 mm Downward speed: 11 mm/s Return speed: 25 mm/s Motor power: 5.5 kW Delivery to the customer is possible. Shipping cost is calculated individually by the transport company.

Condition: used, Press capacity: 50 ton Throat depth: 265 mm Stroke: 250 mm Hodpjwyplcofx Aalofd Daylight: 400 mm Table surface area : 700 x 450 mm Slide area: 550 x 300 mm Table height over floor: 850 mm Approach speed: 32 mm / sec Working speed: 6,3 mm / sec Return speed: 42 mm / sec Required power: 4 kW Dimensions L x W x H: 1290 x 1160 x 2085 mm Weight of machine approx.: 1,75 ton

Condition: good (used), C-frame press Hodox A Tygspfx Aalsfd Capacity unknown, estimated pressing force 40 tons Maximum workpiece height: 250 mm Throat depth: 510 mm Stroke: 250 mm Weight: 3000 kg Stroke up and down adjustable via limit switches Note: The information on this page has been obtained and compiled to the best of our knowledge, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we advise you to verify all relevant details. Financial information VAT/margin: VAT: The shown price is excluding VAT (VAT deductible for businesses)

Condition: good (used), Year of construction: 2002, functionality: fully functional, total height: 3,600 mm, table height: 850 mm, installation height: 500 mm, total width: 1,200 mm, total length: 1,500 mm, throat depth: 250 mm, pressing force: 50 t, table width: 800 mm, table length: 500 mm, overall weight: 4,400 kg, Hydraulic C-frame press, capacity 50 to, table size 800x500 mm, stroke 500 mm, motor 22 kw, dimension 1200x1500x3600 mm, weight ca. 4500 kgs; 2-hand-operation, light-barrier-security Hfedpfxst Ri A Tj Aalod

Condition: excellent (used), Year of construction: 1990, Force 25tons Throat 160mm Daylight 500mm Table size 650x650mm Ram size round 140mm Stroke 130mm requested power 4 KW Weight 2000Kg height 2100mm width 1100mm Hfodpfsfcw Apjx Aalsd depth 1500mm

Condition: used, Hydraulic punch, punch frame for use with JOKA punching units type HP-S Hydraulic hole punch, hydraulic press for punching brackets Year of manufacture: approx. 1995 Pressing force: 5 tons Throat depth: 155 mm Stroke: approx. 20 mm Punching unit width: max. 54 mm Punching unit installation height: max. 220 mm Die holder: Ø 48 mm Motor output: 1.5 kW Power supply: 230 Volt, 50 Hz - Suitable for universal use with JOKA SW 20 or SWD 20 punching units - Throat depth of punching units can be larger, can be pushed through to the rear - Stroke release via electric two-hand control - Hydraulic power pack HAWE, type HCW 4 / 2.5-B 1/400-1 - On subframe, mobile Required space (L x W x H): 1100 x 800 x 1450 mm Hfsdpfxsltrmuj Aaled Weight: approx. 200 kg Good condition

Condition: used, Single-column hydraulic press, straightening press, punching frame ECKOLD Press frame with hydraulic cylinder, mobile press, punching unit Type RSD 1500 - 125 Machine. No. 317 / 690 Year of construction approx. 1986 Compressive force 150 ton. throat 125 mm ram stroke 35 mm Table size 280 x 210 mm Plunger surface Ø 125 mm Installation height (ram to table) max. 265 mm Hfjdped Swtaofx Aaled Table height above floor 403 mm Hydraulic operating pressure max. 500 bar - without hydraulic unit - Plunger surface with 4 M16 threads and 20 mm guide groove, central centering hole Ø 15 mm - 1 high-pressure hydraulic hose with external thread M30x1.5 mm, hose length 4 meters - 1 high-pressure hydraulic hose with union nut M30x1.5 mm, hose length 4 meters Space requirement L x W x H 700 x 300 x 1450 mm Weight 1250 kg Good condition

Condition: used, Year of construction: 1982, pressure 40 t distance between columns 695 bzw. 215 mm stroke 100 mm table surface area 650 x 440 mm ram surface 580 x 285 mm dayligth 400 mm total power requirement 15 kW weight of the machine ca. t dimensions of machine L x W x H 1,63 x 1,05 x 2,61 m - with die cushion - with light bareer make SICK Hedpfx Aetqqq Rsalofd

Condition: good (used), Year of construction: 2007, frame press GOMA PHA 3500 Door Press hydraulic Location Gorzów Wlkp. Hfsdpfx Aaodntc Nelod Conditions of delivery OWN RECEIVING Cost of delivery to be negotiated Startup type to be negotiated Description Comments Working space 3500 x 2300 mm 1000kG (daN) pressure, engine at hydraulic unit 2,2 kW lenght 3500 mm hight 2300 mm weight 2000 kg agrageate hydraulic

Condition: new, Year of construction: 2025, functionality: fully functional, feed length X-axis: 2,000 mm, feed length Y-axis: 3,000 mm, feed length Z-axis: 180 mm, total width: 2,300 mm, total length: 4,120 mm, total height: 2,650 mm, working height: 180 mm, working width: 2,000 mm, pressure plate depth: 120 mm, pressing force: 2 t, overall weight: 2,000 kg, stroke length: 100 mm, warranty duration: 12 months, input voltage: 400 V, input frequency: 50 Hz, height adjustment type: mechanical, power: 3 kW (4.08 HP), Double Hydraulic Frame Press – Industrial Solution for Precise and Efficient Assembly Designed for demanding production environments, this double hydraulic frame press delivers high levels of adaptability and structural integrity, making it ideal for assembling wooden frames – from windows and doors to custom furniture components of various shapes and sizes. Maximum Flexibility for a Wide Range of Applications Thanks to its intelligent engineering and adjustable clamping systems, the press quickly adapts to frames of different thicknesses and geometries without requiring complex setups or manual intervention. Changeovers between workpieces are fast and effortless, significantly increasing production efficiency. Industrial-Grade Construction for Heavy-Duty Use The press frame is built from high-quality structural steel, engineered for enhanced rigidity and operational stability under heavy loads. The side beams are machined from a single solid piece, eliminating potential weak points caused by joints or welds. Strategically placed reinforcements minimize torsional deformation during pressing, ensuring the precise alignment and perpendicularity of all frame components. This robust design not only enhances operational safety but also extends the lifespan of the equipment, even under continuous industrial use. Efficient Hydraulic Pressing with Accurate Force Control The system integrates 10 high-efficiency hydraulic cylinders (6 vertical, 4 horizontal) that apply uniform and controlled pressure across the entire surface of the frame. This ensures consistent joint compression and even adhesive distribution, eliminating gaps or weak spots. Additionally, three frontal pressing systems guarantee correct contact between the workpiece and the pressing tables, optimizing positioning prior to clamping. Modular pressing pistons with quick-lock mechanisms can be easily repositioned to suit the size and shape of the frame, enabling targeted pressure exactly where needed. This is especially beneficial for complex geometries or structurally sensitive zones. Simplified Operation via Fully Automated Hydraulic System Equipped with a high-capacity hydraulic pump, the press operates autonomously without requiring external pressure sources. Pressing functions and pressure adjustments are activated via intuitive electric controls, eliminating physical strain on the operator. Each work zone is equipped with an independent foot pedal, allowing localized operation for increased flexibility. The hydraulic pump is designed to maintain stable and consistent pressure throughout the pressing cycle, ensuring uniform results from start to finish. Engineered for High-Performance Industrial Production This double frame press excels through: large-scale processing capacity, Hfsdpfx Aowgybusaled adaptability to various frame types and materials, efficient and reliable operation. It is the perfect solution for companies operating in heavy-duty production environments, providing a genuine competitive edge in assembly operations, both in terms of speed and precision. Technical support available in english - romanian - german.

Condition: new, Year of construction: 2025, C FRAME SINGLE ACTING HYDRAULIC PRESS MODEL CFSS100 /100 TON Hfsdpfowbtihsx Aalsd Ram Cylinder Capacity (Ton) 100 Ton / 250 Bar Min. Working Pressure (Bar) 30 Bar Max. Working Pressure (Bar) 250 Bar Main Cylinder Diameter Ø220mm * 1 Pc Auxilary Cylinder Diameter Ø 50*35 mm * 2 Pcs Table size (mm) 800x500 mm Stroke (mm) 400mm Daylight (mm) 500mm Advance Speed (mm/sec) 110 mm/sec Return Speed (mm/sec) 160 mm/sec Working Speed (mm/sec) 10 mm/sec Motor (Kw) 11 KW Pump (liters) 26 liters / 19 CC Overall Dimension (LxWxH) 1900x1700x2930mm Weight (Kg) 5,500 KG

Condition: new, Year of construction: 2025, H-FRAME DOUBLE-ACTING HYDRAULIC PRESS MODEL HDD 400 / 400 TON Ram Cylinder Capacity (ton): 400 ton Min. Working Pressure (bar): 30 bar Max. Working Pressure (bar): 250 bar Main Cylinder Diameter: Ø 420 mm * 1 pc Auxiliary Cylinder Diameter: Ø100*60 mm * 2 pcs Table Size (mm): 1500 x 1200 mm Stroke (mm): 1000 mm Daylight (mm): 1400 mm Hfedpowbtn Rjfx Aaljd Advance Speed (mm/sec): 1400 mm/sec Return Speed (mm/sec): 200 mm/sec Working Speed (mm/sec): 2–12 mm/sec Cushion Capacity (ton): 200 ton Cushion Stroke (mm): 400 mm Ejector Force (ton): 10 ton Ejector Stroke (mm): 300 mm Motor (kW): 37 kW Pump (cc): 100 cc Overall Dimensions (LxWxH): 2550 x 3500 x 6100 mm Weight (kg): Approx. 26,000 kg

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: GP6000H2, total length: 6,000 mm, overall weight: 2,600 kg, type of input current: AC, pressing force: 12 t, input voltage: 400 V, working width: 180 mm, working length: 6,000 mm, Equipment: chassis, documentation/manual, MASSIVE GLUING PRESS FOR GLULAM Technical Specifications: Gluing Length: 6 m Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) Pressure Bar Length: 980 mm Gluing Width: from 80 mm to 180 mm Overall Gluing Height: from 800 mm to 1300 mm (available as per inquiry) Cylinder Stroke: 150 to 300 mm Clamping Force: max 10 tons per cylinder; the appropriate force is adjusted on the pressure regulator We prepare 3D Model of the Machine for you to plan the floor space The hydraulic unit is equipped with a hydraulic accumulator and a pressure switch, which allows the hydraulic pump to operate intermittently during the pressing time. The hydraulic accumulator ensures constant pressure, even when the pump is not in operation. When the pressure drops, the pump restarts and refills the accumulator. Cycle Time: approximately 10 seconds. All surfaces that come into contact with the adhesive are protected with polished stainless steel, making it easy to clean adhesive with water. The press features two trolleys with pneumatic cylinders for the lateral alignment of the glued workpiece. Machine Weight: 2600 kg Power Supply Requirement: 5 kW, 3 x 400 VAC Options: Hfodeu Axfcopfx Aaljd -Customized length up to 6 meters -Customized working width -Number of trolleys for lateral alignment available upon request -Trolley with roller for adhesive application available upon request -Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) last segment is as per order 2,0 - 6,0 meters -Customized Overall Gluing Height

Condition: used, HYDRAULIC PRESS SMG PRESSURE 300t LENGHT OF STROKE 700mm Hodpetndu Uefx Aalofd POWER 30kw UP TABLE DIMENSIONS 1500(1600)x1300mm DOWN TABLE DIMENSIONS 1500(1600)x1300mm CUSHION 100t CUSHION LENGTH OF STROKE 280mm WEIGHT 28.000kgr FULL RECONDITION LIKE NEW CHANGE EVERYTHING (SEALS PUMPS etc)

Condition: new, Sheet metal cutting moulds Sheet metal cutting moulds Sheet metal form moulds Hot brass forging Hot steel forging Cold steel forging Hfodpfx Asfuangsalsd Cold forged aluminium & steel Deep drawing moulds Automotive and spare parts white goods Product Info: No pit required Steel construction body T-Channel home plate & ram 8 surface guide ram Adjustable precision stroke Automatic central lubrication Electronic automated counter PLC applications & screen Finger protection light barrier Compliance with CE norms Non-Standard table & stroke length Two-hand control Electric Control Pedal Ram inside hydraulic ejector Cylinder remover by home plate