Used hacksaw machines & power hacksaws for sale (12)

Condition: ready for operation (used), Sawing machine as per photo. Export preferred. Sold without warranty or guarantee, as a parts donor. Video can be sent via WhatsApp. Djdeyrxyxspfx Af Uoki

Condition: used, Year of construction: 1988, 370 mm rund ja möglich Dkjdpfx Afjupmwre Uei

Condition: excellent (used), I sell a massive band saw for cutting metal in bdb condition. Dksdpfx Afju Udrie Usi

Condition: used, Year of construction: 1987, Hydr. hacksaw, metal saw, lifting saw KASTO Unfortunately there is no type plate available, the data is from a comparable saw Type PSB WBS 210 / 230 Year of manufacture in the 80s Dedpfx Afeq R Riio Uski Sawing area - round Ø 250 mm Sawing area - square 225 x 225 mm Sawing area - rectangle 260 x 100 mm Cutting speed 11 -13 - 17 - 22 - 26 - 34 m/min. Saw blade length 400 mm Motor power 1.4 and 1.8 kW pole-changing Mains connection 380 Volt, 50 Hz - only for 90° cuts, no mitre adjustment - Saw motor with 2 speeds and 3 V-belt speeds - Hydraulic saw arm feed - Hydraulic cutting pressure adjustment via throttle valve - Rapid traverse for lowering saw bow - manually height-adjustable material support table with mm scale via handwheel - Manual material clamping - Coolant device in the machine base Space requirement L x W x H 1500 x 700 x 1550 mm Weight approx. 590 kg

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Dkodpfxshzbipo Af Uoi Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: like new (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 051888, Used automatic disc cut-off saw Brand: Pedrazzoli Model: SB 350/45 AP Registration number: 051888 Year: 2004 Head block rotation mechanism for angled cuts up to 45° to the left with locking lever. Pneumatic and anti-burr removable vice. Pneumatic cylinder for head movement, with brake for speed regulation. Transmission with double extensible pulley for variable speed from 15 to 90 m/s. Tilting head on adjustable self-lubricating bushings. 600 mm pitch feeder controlled by pneumatic cylinder. Repeat up to a maximum of 9 steps, to obtain a total stroke of 5400 mm. Maximum feeder clamp opening 160 mm. Dksdorfw Ikjpfx Af Uji Programmable piece counter. Minimum final cut waste of 160 mm. Feeder speed regulating valve. Ammeter. Reverse gear. Emergency button and switch with padlock on the control panel. Blade lubrication-cooling system with electric pump. Coolant tank with removable pump for tank cleaning. Integral guarding designed for quick blade change. Blade disc Ø 350 mm. Cutting capacity: Round tubes 0°: 102mm 45° right: 102mm Square tubes 0°: 85mm 45° right: 90mm Rectangular tubes 0°: 158 x 85mm 45° right: 120 x 85mm Features: Three-phase 380V Dimensions: 1300 x 1350 x 1600 mm Work station height: 950 mm Weight: 420 kg

Condition: used, Year of construction: 1996, Technical details: weight of the machine ca.: 1750 kg sawing motor: 2,2 kW Dedpfx Afjvpt Eyo Uoki total power requirement: 5 kW cutting speed: 17 - 90 m/min cutting diameter: 320 mm cutting range max.: 320 x 320 mm saw band length: 4.930 x 34 x 1,1 mm feed length: max 9x 600 mm dimensions of the machine ca.: 2,6 x 2,4 x 1,40 m Bandsaw automatic, straight cut, min. cutting diameter 10mm, min. cutting length 6mm, min. offcut 15mm (automatic 80mm), max. weight of material 400kg/m, coolant box 60l, pump 16l/min, clamping pressure 20-60bar, dimensions: chipconveyor 2.400x 950mm roller track 2.200 x 950mm, 5pcs. saws (new) 4.930 x 34 x 1,1mm operating manual, *

Condition: used, Year of construction: 2005, cutting diameter 220 mm band length 425 mm cutting lenght max. 2500 mm total power requirement 0,95 kW weight of the machine ca. 219 kg dimensions of the machine ca. m Dsdpfx Ast Hxayef Uski

Condition: good (used), Year of construction: 1989, machine/vehicle number: 0172, Offer 25286 Technical specifications: Dodpjw Ei Tdjfx Af Ujki - Saw blade dimensions: 400 x 35 x 2.0 mm - Cutting range - 90° round: approx. 252 mm - flat: approx. 250 x 160 mm - square: approx. 210 x 210 mm - 45° round: approx. 160 mm - flat: approx. 150 x 150 mm - Automatic material feed - Max. vise opening: 265 mm – miter-adjustable vise - Coolant system - Drive: 400 V / 0.65 / 1.6 kW - Required space: approx. W 1400 x H 950 x D 1700 mm - Weight: approx. 600 kg

Condition: used, max. diameter: 400 Djdpfxoih N She Af Uoki

Condition: used, Year of construction: 1977, cutting diameter:250 mm band length:450 mm cutting speed:50/70/100/135 Hübe/min range L-W-H:2,6 x 1,8 x 1,1 mm total power requirement:3,8 kW Dodpocxxw Ujfx Af Ujki weight of the machine ca.:1,2 t

Condition: used, Year of construction: 2009, Circular saw KASTOflex F in good condition, documentation included. Can be tested in Kaunas. Specification Model: Kastoflex F Year: 2009 Weight: 2700 kg Power: 13 kW Dimensions: length 4800 x height 2225 x width 2580 Automatic feeding, dumping Sawn conveyor Corner cutting Pressure CNC controller Dkodpjwfd Icjfx Af Usi Cutting at an angle of 90 (round, square, flat) 150 / 140 x 140 / 200 x 100 mm Cutting at an angle of 45 (round, square, flat) 145 / 120 x 120 / 160 x 80 mm Cutting at an angle of 60 (round, square, flat) 115 / 100 x 100 / 120 x 60 Disc diameter (Ø 350 mm opt.) Ø 400 to 450 mm If If you have more questions, we will be happy to answer them.