Used double miter saws for sale (32)

Condition: excellent (used), Year of construction: 2001, operating hours: 6,000 h, functionality: fully functional, machine/vehicle number: 267978, cutting length (max.): 4,000 mm, feed length X-axis: 4,000 mm, feed length Y-axis: 4,000 mm, feed length Z-axis: 4,000 mm, saw blade diameter: 450 mm, feed rate X-axis: 2,820 m/min, total length: 6,000 mm, total width: 1,200 mm, total height: 1,800 mm, type of input current: three-phase, saw blade speed: 2,820 rpm, double mitre saw in top condition still working in full use at our workshop till we get new one in new year Todpfjxxxf Hsx Ahuef

Condition: new, Year of construction: 2025, Optimum Optisaw SD 500 Double miter metal band saw with swiveling saw bow Art. no. 3292380 length approx. 2122 mm width/depth approx. 1046 mm height approx. 1497 mm Weight approx. 522 kg Electrical data Motor power coolant pump 100 W Total connected load 3.8 kW Supply voltage 400 V Mains frequency 50 Hz Tsdpfogd Si Eex Ahuef Machine data Saw band speed(s) 35 / 70 m/min Saw band length 3770 mm Saw band width 34 mm Saw band thickness 1,1 mm Cutting angle 45 - -60 ° Feed Hydraulic via lowering cylinder Lifting of saw bow manually Cutting ranges 0° round (solid material) 355 mm 0° square (solid material) 280 mm 0° rectangular upright (solid material) 280 x 490 mm -45° round (solid material) 290 mm -45° square (solid material) 250 mm -45° rectangle standing (solid material) 250 x 250 mm +45° round (solid material) 355 mm +45° square (solid material) 280 mm +45° rectangle upright (solid material) 280 x 340 mm +60° round (solid material) 230 mm +60° square (solid material) 180 mm +60° rectangle standing (solid material) 180 x 220 mm Heavy industrial design Low noise operation High cutting accuracy due to vibration-free running Miter adjustment -45° to 60° by swiveling the entire saw bow High-quality bi-metal saw band as standard equipment Microswitch for automatic end stop Coolant pump Ball bearing saw band guide with hard metal plates for optimal cutting results Easy adjustment of the lowering speed by means of feed control valve in the control panel Large dimensioned quick clamping screw stoc [...]

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 2449220206, cutting length (max.): 6,000 mm, Machine currently in use, but with very low operating hours. Everything functions properly, but the machine will require servicing to be in perfect condition. Air hoses need replacement, cylinders need to be adjusted, and lubrication should be scheduled. The blades are in good condition. The machine can be disassembled at any time and loaded for transport. A custom-made, closed wooden transport crate can be provided on request at an additional cost. More photos and videos available upon request. Tjdpfx Aoxx Ayzjhujf

Condition: used, Year of construction: 1994, Technical details: saw blade diameter: 450 mm revolution per minute: 2820 U/min cutting lenght max.: 5000 mm cutting length min.: 240 mm air pressure - required: 6-8 bar hole of sawblade: 32 mm mitter cutting - both sides: 45+90 ° air-pressure connection: 6 - 8 bar total power requirement: ca. 4,6 kW weight of the machine ca.: 1,1 t dimension machine xH: 6,05x1,49x1,79 m Tedpfx Ahou Nigkeuef Further features of the machine: - Pneumatic vertical and horizontal tension - pneumatic mist spraying device - height adjustable machine feet - material supports movable with saw - piece counter Cutting diameter according to tabular cutting range diagram, as dependent on speed and saw blade. Accessories: - 2 spare saw blades Machine can be demonstrated under power. i.D. *

Condition: used, Year of construction: 1993, Technical details: cutting diameter: 195 x 120 mm cutting range min.: 135 x 120 mm saw blade diameter: 380 mm Tsdpowz Hygsfx Ahuef cutting length min.: 500 mm cutting lenght max.: 6000 mm max. spindle speeds: 2800 U/min total power requirement: 3 kW weight of the machine ca.: 850 kg

Condition: like new (used), Year of construction: 2016, operating hours: 22 h, functionality: fully functional, saw blade diameter: 500 mm, Elumatec Double Mitre Saw DG 142 with E580/1 Control – Precision Saw for Aluminium and PVC Profiles For sale is a high-quality Elumatec DG 142 double mitre saw equipped with electronic control system E580/1. This machine is ideal for the precise cutting of aluminium, PVC, and light metal profiles – particularly suited for window, door, and façade construction. Tjdpfx Ahsw D Rv Deujf Technical specifications: Manufacturer: Elumatec Model: DG 142 Control: E580/1 (automatic positioning and angle adjustment) Mitre cuts: 45° – 90° (automatically adjustable) Cutting length: up to approx. 5,000 mm (depending on configuration) Blade diameter: approx. 500 mm Speed: approx. 2,800 rpm Connection: 400 V / three-phase Condition: used, technically flawless Availability: immediate +++ Operating hours: 22 HRS +++ Special features: - Automatic positioning of both saw units - Precise and clean cuts thanks to stable machine guidance - Programmable control for highly repeatable series cuts - Excellent cutting quality, also on demanding profiles - Ideal for metal fabrication, window production, and conservatory construction The machine is network-capable incl. extraction unit + SICK light curtain

Condition: new, Year of construction: 2025, Schnittbereich rund: 420 mm Schnittbereich quadratisch (B x H): 610x420 mm Schneidebereich 45° rund: 400 mm Schneidebereich 45° flach (B x H): 400x400 mm Schneidebereich 60° rund: 280 mm Cutting range 60° flat (W x H): 280x280 mm kleinste zu schneidende Größe: 10x10 mm Kürzeste Reststücklänge im Einzelschnitt: 0-610 mm Kürzeste Reststücklänge im automatischen Betrieb*: 20 mm Length: 1780 mm Todpfx Asxu A Dlshuef Breite inkl. Späneförderer : 3060 mm Height: 1700 mm Höhe der Materialauflage: 905 mm Weight of machine approx.: 1210 kg Electrical connected load: 4 kW Leistung des Sägemotors: 3 kW Leistung hydraulischer Motor: 0,75 kW Schnittgeschwindigkeit stufenlos regelbar: 20-80 m / min Abmessungen des Sägebandes: 5200x34x1,1 mm

Condition: used, This Elumatec double mitre saw, model DG79, is being auctioned in our online industrial/machinery insolvency auction: Wietec Fenster GmbH – machinery fleet, workshop equipment, trailers. Tedoxu Tv Eepfx Ahuof

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, cutting length (max.): 6,000 mm, saw blade diameter: 550 mm, Used Emmegi PrecisionTS2 Emmegi Precision TS2 Double Miter Saw Todpfxjwaz Ags Ahujf Year of 2014 Cutting length 6000mm Double miter saw with 3 controllable axes with automatically movable saw unit and electronic control of all miters from 45° (inside) to 15° (outside) with an accuracy of 280 intermediate positions per degree. Including profile support roller conveyor on the movable unit Additional clamping device on the roller conveyor Label printer with dispenser PRO software (overlength cutting, underlength cutting, cross-cutting, wedge cutting) SLICE software (butt cuts with variable corners and lengths up to a usable cut of 500mm) Driver for connecting external calculation programs

Condition: used, Year of construction: 1995, cutting width 375 mm Cutting height 150 mm dimensions of saw-blade 500 x 30 mm Motor output 2 x 3 kW Cutting length 5100 mm speeds 2800 U/min air pressure 6 bar weight of the machine ca. 700 kg dimensions of the machine ca. 6100 x 1450 x 1450 mm Tjdjtv Rgrepfx Ahujf * Profile support plate made of steel * Stable cast construction of the saw unit * Large cutting range, 2 profiles can be cut at the same time * Easy adjustment of the moving unit with roller guides * Double storage of the swivel device * Safe clamping thanks to the two-pressure system * Double saw feed guide * Hydropneumatic saw feed * External dimension correction scale * Left saw unit fixed * Swivel range 45°-90° * Including suction (without piping) ALKO Mobil-Jet 100 year of manufacture 2002

Condition: good (used), Year of construction: 2008, functionality: fully functional, Technical information – Elumatec DG 244/2 year 2008 Control unit model: E355 Main electrical connection: 3/PEN/400V - 50 Hz Power consumption: 12.8 kW Additional information Advantages of the machine Technical advantages of the machine: - Saw blade diameter: 550 mm - Saw blade speed: 2,800 rpm - Compressed air supply: 7 bar - Weight: 1,850 kg Machine can be inspected in operation in department 76 Available from week S38/S39 Price includes loading Tsdpjw A Iubsfx Ahuef

Condition: good (used), functionality: fully functional, cutting length (max.): 600 mm, pivoting range: 20,135 °, For sale: 1 used double mitre saw Manufacturer: Hebö Maschinenfabrik Model: unknown Year of manufacture: unknown Saw blade diameter: 500 mm Processing length: up to 600 cm Mitre angle: 20 - 135 degrees Tsdsxrag Ejpfx Ahujf Control system: see picture The machine can be inspected at our warehouse in 09599 Freiberg.

Condition: used, Technical details: Tsdeu Nigwopfx Ahusf saw blade diameter: 420 mm cutting lenght max.: 5000 mm cutting range: H x B: 180 x 100 mm air pressure - required: 6 bar mitter cutting - both sides: 45° - 90° (manuell) ° voltage: 380 / 220 V total power requirement: ca. 8,0 kW weight of the machine ca.: auf Anfrage t dimension machine xH: 6,4 x 1,3 x 2,0 m Circular saw with 2x sawhorses for cutting profiles with inclined cuts up to 45°. microprocessor positioning control BECKHOFF E 70-300 with absolute encoder, digital display travel per saw block = 2350mm, motorized Clamping cylinder for each horizontal and vertical, manual flushing device hydropneumatic feed use of carbide saw blades i.D. *

Condition: new, Cutting range: round 0°: 270 mm square 0°: 260 x 260 mm flat 0°: 320 x 260 mm round 45° R: 230 mm square 45° R: 220 x 220 mm flat 45° R: 230 x 150 mm round 60° R: 140 mm square 60° R: 140 x 140 mm round 45° L: 200 mm square 45° L: 175 x 175 mm flat 45° L: 220 x 150 mm Cutting speed: 40 / 80 m/min Saw blade: 2925 x 27 x 0.9 mm Working height: 975 mm Coolant pump: 100 W Saw motor: 1.9 kW Voltage: 400 V Dimensions LxWxH, approx.: 2000 x 1300 x 2000 mm Weight, approx.: 550 kg Features: - Double mitre saw with swivel saw arm from left -45° to right +60° - Ideal for cutting pipes, profile material and solid material made of VA, iron, etc. in commercial applications - Generously dimensioned cast saw arm for low-vibration work - With 2 saw blade speeds for optimum adaptation to the workpiece - Hydraulic lowering cylinder Tsdpfx Aeiqt Rljhuef - Quick-clamping vice for quick and easy workpiece clamping - Precise, adjustable saw blade guide for optimum cutting results - CE/IEC, German documentation and German service Scope of delivery: - BiMetal band saw blade 2925 x 27 x 0.9 mm - Band tension adjustable via pressure gauge - Carbide guides - Quick-clamping vice - Material stop - Coolant device with pump - Hydraulic lowering cylinder - Motor protection switch - Automatic switch-off at the end of the cut - Underframe

Condition: good (used), Year of construction: 1995, functionality: fully functional, For sale: Emmegi TU/4 double head cutting-off machine, year 1995. A reliable and simple two-head saw for cutting aluminium and PVC profiles. Ideal for window & door manufacturers and general profile fabrication. Specifications Double head mitre saw Blade diameter approx. 350 mm (Ø300–400 mm) Cutting angles 90° and 45° Cutting length approx. 3–4 m Pneumatic horizontal clamps Tjdpfsxz R Npex Ahuef Motor power ~1.5–2.2 kW per head Spindle speed approx. 3000 rpm Weight approx. 500–600 kg 400 V / 6–8 bar Machine is in working condition and ready for use. Please verify the accuracy of the machine specifications with the seller.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Year: 2011 - technically efficient, ready to work – after full service - Cutting length: 6000 mm - Discs: 420 mm (bottom cutting) - E355 control Tsdpowy Emcofx Ahujf - Digital angle indicator - Pneumatic angle adjustment 45-90 degrees - Cutting to outside dimensions, without correction - Cooling and lubrication system - Roller feeder - Vertical and horizontal pneumatic clamps - Automatically lowered and raised disc guards

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 0799336047, Elumatec double mitre saw Tjdpjxf Dugsfx Ahuef

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 1049333220, cutting length (max.): 4,500 mm, saw blade diameter: 420 mm, double mitre saw 4,5 m D=420mm; E 355; 22,5° inside second-hand, year of manufacture: 2008 M-No.: 1049333220 - cutting length 4.500 mm - saw blade diameter 420 mm - Swivel range inwards, pneumatic 90° - 45° (up to 22.5° manual with digital display) - External dimension cutting for all cutting variants. This eliminates the need for length calculations necessary. Great advantage for special angles. Positioning control E355 - Drive-independent measuring system - Positioning accuracy +/- 0.1 mm per meter - Pneumatic locking in position - 5" matrix display with membrane keypad and handwheel for navigation in the operating menus - Memory for 999 data records Correction values for profiles - The record memory can store the record number, length dimension, profile number, angle position and number of pieces can be saved - Switch to 2nd language - Switchover mm/inch - RS 232 interface Technical data: Smallest cutting length at 90°: 335 mm Smallest cutting length at 45° inclination: 335 mm Voltage: 400V, 3 PH, 50 Hz Power output per motor: 4 kW Compressed air connection: 7 bar Air consumption per work cycle without spraying: 40 l with spraying: 64 l Accessories supplied: 2 carbide saw blades for aluminum and PVC (used): 420 mm diameter, 96 teeth Dosing spray device Todpeuw T Stsfx Ahujf The following accessories are also included: 1x mobile workpiece support

Year of construction: 1992, condition: used, machine/vehicle number: 7375, cutting length: 5000 mm disk of circular saw-Ø: je nach Bedarf 420 - 500 mm space needed: 6400 x 1400 x 1700 mm Tjdpfx Ahjz E Snsusf weight: ca. 1600 kg

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: C123969, saw blade diameter: 500 mm, rotational speed (max.): 2,820 rpm, overall weight: 1,490 kg, tilt adjustment saw blade: 22 °, TECHNICAL DETAILS Speed: 2,820 rpm Number of saw blades: 2 Saw blade diameter: 450 & 500 mm Saw angle: 22° - 90° Motor Blade motor power: 2.2 kW MACHINE DETAILS Weight: 1,490 kg Motor Blade motor power: 2.2 kW Electrical data Power: 5.3 kW Current: 13 A Voltage: 400/3 V Tsdpjxwnhusfx Ahusf Frequency: 50 Hz EQUIPMENT Chip conveyor Note: The machine is available from 01.12.

Year of construction: 1985, condition: good (used), Offer 22556 Technical data: - Saw blade diameter 420 mm - saw blade bore 30 mm - max. cutting length 3000 mm - smallest cutting length at 90° + 45° 335 mm - cutting range see diagram enclosed - tilting range inwards manual 90 - 22,5 ° - inclination range inward manual 90 - 45 ° - Saw blade speed 2800 rpm - drive 380 V / 2 x 4000 Watt - Compressed air supply 7 bar - Air consumption per working cycle approx. 64 l - space requirement approx. W 4500 x H 1950 x D 1600 mm - weight approx. 1400 kg - with: - cutting length adjustment with positioning control Tsdpfx Ajimdlrjhuof - positioning control renewed approx. 2002 by WOLFF - saw unit swiveling and tilting for high and wide profiles, - as well as shift cuts

Condition: good (used), Year of construction: 2016, functionality: fully functional, Year: 2016 - technically efficient, ready to work - after full service - cutting length: 4000 mm - discs: 500 mm (feed from the rear) - pneumatic inclination of both heads: 90°, 45°, 22.5°, intermediate angles set manually - operator panel with Windows - cooling and lubrication installation for both heads - movable roller feeder - vertical and horizontal pneumatic clamps - automatic disc covers - delivery device for long elements Tedpfxetqmmds Ahuef - safety gates

Condition: good (used), Year of construction: 2008, Manufacturer: EBG-TECH Type: BMW N-63 Year: 2008 Max. disk diameter: 300 mm Overall size: 1900 x 1200 x 2900 mm Weight: 1750 kg Tsdef Ecwzopfx Ahujf

Condition: excellent (used), Year of construction: 2008, Maximum cutting lenght : 3000 mm Minimum cutting length at 90° 350 mm Minimum cutting length tilted at 45° 350 mm Pivoting range inwards 90° - 45° (up to 22.5° manual with digital display) Tilting range inwards pneumatically 90° - 45° For cutting range, see cutting diagram Saw blade diameter 420 mm Saw blade speed 2,800 rpm Tedpfx Ahoxc Tyyousf Power supply 230/400 V, 3~, 50 Hz Power output per motor 4 kW Compressed air supply 7 bar Air consumption per working cycle 40 l without spraying, 64 l with spraying WINDOWS 2000 Software

Condition: good (used), Year of construction: 2006, Year: 2006 - technically efficient, ready to work - after full service - cutting length: 6000 mm - discs: 550 mm - E555 control - digital angle indicator - pneumatic angle adjustment 45-90 degrees Tjdpfxsr Ikvus Ahuef - cutting according to external dimensions, without correction - cooling installation - roller feeder - vertical pneumatic clamps - automatically lowered and raised disc guards - chip extraction for each head