Used briquetting presses for sale (84)

Condition: as good as new (ex-display), Year of construction: 2025, Machine for sale at a special price Another machine, available immediately (ex works Neckartailfingen) * Includes a 1-year warranty. Your advantages: + Very robust, simple technology + Excellent price-performance ratio + Suitable for continuous operation + Long-standing, well-functioning/established machine Includes control cabinet with timer operation The press is switched on manually and then runs until the set time on the timer has elapsed (e.g., 4 hours). Then, the press switches off. Technical data: Briquet dimensions: approx. 30 x 30 mm (square), Briquet length: 5-40 mm *material-dependent Throughput: up to a maximum of 20 kg/h *material-dependent Machine dimensions: approx. 137 x 75 x 148 cm (length x width x height), Machine weight: approx. 250 kg, Silo capacity: approx. 250 liters, Motor: 2.2 kW, 400 V - 50 Hz, Noise emission: 62 dB, Raw material requirements: Hfodpfx Ahsd Nnwlonji - Wood chips and dust smaller than 15 mm in length - Moisture content less than 18% ATRO - Sand, stones, metals and minerals increase wear --- Options available at an additional cost: - Timer function + €490 net Machine is started manually and switches off automatically after the set time X. - Level sensor for automatic operation + €1450 net Press starts and stops automatically * NEW!!! Also available in 230 volts, Motor then 3 kW instead of 2.2 kW, Additional cost + €890 net (delivery time then approx. 8 weeks) - Special dies + €2,950 net ---

Condition: good (used), Refurbished machine *Options at additional cost, see below with a full 1 year warranty Ready for delivery approx. 16 weeks after ordering Technical specifications: Throughput up to 1200 kg / h depending on the material (e.g. sawdust with a bulk weight of 150/180 kg / qbm) Briquette Ø 75 mm including 2 m press channel Main motor power 45 kW Feed screw gear motor 2 x 2.2 kw Compressor screw 2 x 5.5 kw Distribution auger 2.2 kw Hydraulic pump motor 0.37 kW Total connected load 65 KW Control panel with plain text display for operating states and utilization display for main drive and feed screws PLC control Siemens S7 / 300 with operating hours counter in the control cabinet Machine hat CE mark Automatic start / stop function of the machine Dimensions 3100x860x1800 mm lxwxh Weight 4500 kg Options: -Silo for MAP series Storage silo above the machine - Contents approx. 6 square meters, stable steel construction with agitator discharge and level indicator. 19,700 € net plus VAT. *only possible for one presse MAP 1200 below the silo if you need to place two machines MAP 1200 below one silo it needs to be build completely different. the price for this silo is 37.900 € net -Temperature control device for the pressing tools to maintain the temperature for optimal briquette size. Temperature controller for pump, cooling unit, fan, pressostat Wired ready for connection - must be left for operation including corresponding control € 7.850 net Oil heater 1.950 € net -Guillotine, to cut the briquettes to length Hfodps E Dquofx Ahnei Create a compressed air connection on site € 6,940 net plus VAT -Transport line / cooling section (nominal value: 4x2m) 990 euros net per 2 meters - Control System 4.995 € net Assembly / commissioning (nominal value approx. 2-3 days on site to install one press) based on effort and upon proof against separate invoice. The following sentences apply: Service technician/mechatronics technician per assembly and hour of travel: €129.00 Overtime: 25% surcharge 50% surcharge per Saturday and night hour 100% surcharge for every Sunday and public holiday hour Release per fitter per day: country dependent Per car, van and driving kilometer: €0.98 / km Arrival and overnight stay against receipt or flat rate bill at the client's expense. . Test with the respective customer material: (up to a maximum of 750 kg) - €1,970 net flat rate --- Recognition from the raw material: - The moisture content must be between a minimum of 6 and a maximum of 18% - Maximum span 20 mm - Excessive temperature: temperate room at at least + 5 ° C. - The loading must be free of metals and mineral impurities. This and the pressing tools and / or responsible wear can be the result

Condition: good (used), Year of construction: 2001, Good, used condition Low operating hours (1,675 h) Motor: 11 kW Pressure: adjustable up to a maximum of 250 bar Throughput: up to max. 220 kg/h Hodpfxswcc D Rs Ahnjfi Briquette size: 150x60 mm Press dimensions: approx. 2200x3000x1920 mm (LxWxH) Control cabinet dimensions: 500x1250x2120 mm (LxWxH) Weight approx. 3,000 kg

Condition: excellent (used), Year of construction: 2021, CATALOG NUMBER 7852 Technical specifications: - Pressing force: hydraulic - Briquette shape: round - Briquette diameter: 60 mm Hfedpfx Ajzccw Nshnsi - Hopper diameter: 1000 mm - Throughput: approx. 110 kg/h - Automatic machine operation - Oil cooler - Motor: 7.5 kW - Dimensions (L/W/H): 1800x1100x1500 mm - Weight: 730 kg ADVANTAGES – Unpainted – Italian manufacture – Used briquetting machine – Original DTR + CE documentation – Perfect condition, year of manufacture 2021 Net price: 46,900 PLN Net price: 11,170 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (With significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Year of construction: 2022, operating hours: 6,500 h, functionality: fully functional, For sale: 3 UMP BP 500 A sawdust briquetting machines. Model years: 2022, 2022, 2023. The machines are fully operational and have all undergone a complete service. Hjdpfx Aheyr S T Senefi

Condition: excellent (used), Year of construction: 2007, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 1541, total width: 2,000 mm, total height: 2,500 mm, total length: 30,000 mm, briquette diameter: 90 mm, overall weight: 6,000 kg, Equipment: CE marking, type plate available, Complete production line for cylindrical briquettes, Ø 90 mm. The line includes a Di Più BRIK MB90 briquetting press, an input sawdust conveyor, a briquette cooling tower, a briquette cutter, a briquette sorting conveyor, a shrinking tunnel (packaging machine), and an output roller conveyor. Hedpsy U D Uuofx Ahnofi

Condition: excellent (used), Catalogue number: 7984 TECHNICAL DATA - pressing force: hydraulic - briquette shape: round - briquette diameter: 70 mm - hopper diameter: 1000 mm - output: up to 10 briquettes/min, approx. 90 kg/h - automatic machine operation - motor: 5.5 kW - dimensions (L/W/H): 1800x1200x1500 mm - weight: approx. 650 kg ADVANTAGES – Italian manufacture – used briquetting press – not repainted – very good condition Net price: 33,900 PLN Hfjdpezbazvjfx Ahnei Net price: 8,070 EUR (at an exchange rate of 4.2 PLN/EUR) (Prices may vary with significant currency fluctuations)

Condition: excellent (used), Catalogue number 7737 TECHNICAL DATA - Pressing force: hydraulic - Briquette shape: round - Briquette diameter: 70 mm - Hopper diameter: 1000 mm - Throughput: approx. 70 kg/h Hfjdpezbavyefx Ahnsi - Automatic machine operation - Motor: 5.5 kW - Dimensions (L/W/H): 1800x1150x1540 mm - Weight: 900 kg ADVANTAGES – Italian manufacture – Used briquetting press – DTR technical documentation – Condition: very good Net price: 34,900 PLN Net price: 8,300 EUR (based on the rate of 4.2 EUR) (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2007, Catalog number: 7809 TECHNICAL DATA - Pressing force: hydraulic - Briquette shape: round - Briquette diameter: 70mm - Hopper diameter: 900mm - Automatic machine operation - Inspection window in the machine hopper - Equipped with an additional oil heater - Motor: 5.5kW - Dimensions (L/W/H): 1600x1200x1500mm - Weight: 685kg ADVANTAGES - Unpainted - Made in Italy - Equipped with an additional oil heater - Used briquetting machine - Very good condition Net price: 36,900 PLN Hfedpfx Aezab Rpjhnei Net price: 8,786 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to exchange rate fluctuations)

Condition: reconditioned (used), Year of construction: 2009, briquette diameter: 100 mm, 3 × Di Più MB100 Briquette Press – Year of Manufacture 2009 – Complete System with Saws & Accessories For sale are 3 Di Più MB100 briquette presses, year of manufacture 2009, including saws, conveying equipment, and other accessories. The machines come from industrial use and are ideal for the production of wood briquettes from sawdust, wood chips, and wood residues. --- Technical Data (per machine): Type: Di Più BRIK MB100 Year of Manufacture: 2009 Briquette Diameter: approx. 90 – 110 mm Production Capacity: approx. 1,300 – 2,300 kg/h Pressing Pressure: approx. 2,000 – 2,500 kg/cm² Main Motor: 75 kW Total Power: approx. 98 kW Material Moisture: optimal 8 – 12 % Particle Size: approx. 1 – 12 mm Weight: approx. 7,800 kg per machine Drive: hydraulic ram press --- Equipment: Material hopper Conveying screws Hydraulic system Control cabinets Saws for cutting briquettes to length Protective covers & safety systems Discharge units --- Scope of Delivery: 3 complete Di Più MB100 briquette presses Saws Conveying equipment & accessories Spare parts upon request --- Application Areas: Sawmills Wood processing industry Biomass plants Briquette production for energy & sale Location: upon request Transport: organization possible by arrangement Price: upon request Hodpfx Aezfwmcjhnsfi Individual sale or complete package possible

Condition: excellent (used), Year of construction: 2014, The A 100 N features the same characteristics as the A6 Plus and Junior models; however, it is equipped with a larger motor and hydraulic pump, and a more advanced electrical system. General Features: - Robust construction - Very user-friendly and economical to operate - Easy maintenance - Inspection door with window - Mechanical level probe (rotary paddle switch) - Oil filter in the hydraulic circuit - Pressure gauge for oil pressure monitoring - Oil level switch - Control panel at the front of the machine - Automatic sensor for press start/stop - Emergency stop button - Circuit diagram - CE compliance - Operating manual Hedpfswyc H Tox Ahnsfi Technical Data: - Motor power: 7.5 kW, 400 V, 50 Hz connection - Number of press cycles per minute: 14 - Throughput: 60 – 100 kg/h (material-dependent) - Briquette diameter: 65 mm - Number of hydraulic cylinders: 3 - Hydraulic tank capacity: approx. 180 liters - Hopper diameter: approx. 1200 mm Dimensions (L x W x H): 2115 x 1350 x 1700 mm Weight: approx. 1000 kg Including approx. 2 m briquette discharge pipe Note on used machines: - Specifications are subject to change and prior sale. - All prices are ex works – free loading at location. - The machine has been cleaned and tested for functionality. - All machines are sold as inspected, without any warranty or guarantee. Buyers are welcome to inspect the machines on site. - Special agreements are only valid if made in writing. (We will only respond to inquiries that include your address and telephone number!)

Condition: excellent (used), Year of construction: 2015, operating hours: 2,400 h, functionality: fully functional, overall weight: 6,000 kg, input voltage: 400 V, oil tank capacity: 200 l, pressing force: 200 t, pressure: 300 bar, compressed air connection: 10 bar, power: 18.5 kW (25.15 HP), year of last overhaul: 2026, filling opening width: 3,000 mm, Equipment: emergency stop, Selling a fully automatic briquetting system with a packaging line. In automatic mode, the system produces wood briquettes in 10 kg packages without supervision. Before palletizing, the weight is checked. Packages that are underweight are sorted out and placed on a separate pallet. The palletizing robot serves 4 pallet stacking stations, each with a capacity of 96 packages. In the event of a malfunction, an alarm is sent via SMS. Both the briquette press and the palletizing robot have been used very little and are in very good condition. The machine can be inspected while in operation. Consisting of: Hfjdezdk Ukepfx Ahnei - Hopper, 10 m³ - Briquetting press RUF 300 - Curved conveyor belt - Straight conveyor belt, 7 m - Stacking machine, fully automatic, special design, pneumatically operated, Siemens PLC with adjustment options and package counter - Insert for leaflets, Köra Packmat - Film packaging machine Affeldt, pneumatically operated - Shrink tunnel Affeldt - Accumulation conveyor belt, 4 m - Singulation conveyor belt, 1 m - Roller conveyor, 1 m with load cells for weight control, Siemens PLC - Palletizing robot KUKA KR 210 R3100 ultra, approx. 4000 operating hours - Gripper, pneumatically operated with clamping and ejector - Safety fence with roller gate

Condition: excellent (used), Year of construction: 2021, operating hours: 10,200 h, functionality: fully functional, machine/vehicle number: 3284, Standard version of RUF Lignum R2 with outfeed channels, el.motor 22 kW, briquette sizes 150x60 mm capacity up 500 kg/h Hjdpfx Aoyyl Srshnefi

Condition: excellent (used), Briquetting machine POR Oscar 9kW Average briquette output: 130-180 kg Briquette diameter: 70 mm Motor power: 9 kW Feeding hopper diameter: 1170 mm Technical documentation CE mark Machine weight approx. 800 kg Hfedpfx Ahjxdahysnji

Condition: used, Technical specifications: Briquette diameter: 55 mm Briquette length: 50 mm Hfodpfxezd Erwo Ahnji Tank diameter: 1000 mm Tank height: 910 mm Tank capacity: 2.86 Output: 910 L Feed capacity: 400 L Motor power: 4 kW Safety switch Overall dimensions: Length: 1700 mm Width: 1100 mm Height: 1490 mm

Condition: used, Technical specifications: Briquette diameter: 60 mm Hodpfozd Akkex Ahnefi Briquette length: 50 mm Hopper diameter: 1100 mm Hopper height: 910 mm Hopper capacity: 0.89 m³ Throughput: 60-80 kg/h Power supply: 400 V Motor power: 7.5 kW Safety switch Overall dimensions: Length: 1670 mm Width: 1100 mm Height: 1500 mm

Condition: as good as new (ex-display), Year of construction: 2025, Briquette Diameter: 40 mm Power: 4 kW Hodovptrtspfx Ahnefi Press Output per hour: depended on material Hopper opening: 1.044 x 1.044mm Controlled by PLC Hydraulic tank: 100l New exhibition machine with 5 operating hours

Condition: used, Year of construction: 2006, functionality: fully functional, total width: 1,900 mm, total height: 1,800 mm, total length: 2,500 mm, briquette diameter: 80 mm, overall weight: 2,400 kg, type of input current: three-phase, oil tank capacity: 600 l, – after technical inspection – Italian production – year of production 2006 Hfedpfx Aev T Uphohnsi – DTR TECHNICAL PARAMETERS: – briquette Ø: 80 mm – max. briquette length: 80 mm – efficiency: 350 kg/h – engine power: 27.5 kW – hydraulic crush: 1400 kg/cm2 – max. operating force: 150 bar – oil capacity: 600 l – container diameter: Ø 1200 mm – container height: 90 cm – dimensions (length/width/height): 2500 x 1900 x 1800mm – net weight: 2400 kg

Condition: excellent (used), Year of construction: 2019, operating hours: 2,200 h, functionality: fully functional, power: 90 kW (122.37 HP), Briquetting press Ruf RB 1500 Year of manufacture: 2019 Only 2,299 original operating hours Hjdpfsyxfvzex Ahnefi Including storage silo Including extraction system / Alko mobile dust extractor Very good condition, no defects Briquette size approx. 27 x 10 x 10 cm Throughput approx. 900 kg per hour Motor power 90 kW

Condition: like new (used), Year of construction: 2021, operating hours: 10,367 h, functionality: fully functional, RUF LIGNUM R2 briquetting system for sale in excellent technical condition. The machine has a low number of operating hours and is ready for immediate operation. No additional investment required. An ideal solution for companies looking to quickly start or expand briquette production. BASIC INFORMATION: Model: RUF LIGNUM R2 Year of manufacture: 2021 Operating hours: 10,367 h Left-hand version — material feed from the left side Condition: excellent, fully operational Availability: available immediately from Estonia, Saaremaa. MAIN TECHNICAL PARAMETERS: Capacity: up to 570 kg/h Main motor: 22 kW Pressing pressure: up to 300 bar Siemens PLC control system Machine dimensions (L × W × H): 2900 × 2000 × 2100 mm Machine weight: 3,800 kg Briquette size: 150 × 60 mm Required material moisture content: up to 15% EQUIPMENT INCLUDED: Material feeding hopper Pre-compression system 45° briquette discharge chute Connection for extraction system Full documentation ADVANTAGES: Energy-efficient RUF press model Hydraulic oil tank heating and control cabinet heating for operation in unheated production facilities Suitable for continuous 24/7 operation Low operating and maintenance costs Hfsdpfx Ahezapddonsi Suitable for various types of wood waste PRICE: €50,000 excl. VAT

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 1113, total width: 1,170 mm, total height: 1,510 mm, total length: 1,850 mm, briquette diameter: 60 mm, overall weight: 770 kg, Never used = New machine condition Year of manufacture: 2024 Operating hours: 6! - Option for water or oil cooling, suitable for larger or multi-shift operations (price is stated without cooling system) - Sufficiently large hopper ensures long machine runtime without the need for frequent material refilling Technical data: Motor power: 7.5 kW Briquette output: 40–100 kg/h depending on material Briquette diameter: 60 mm Briquette length max 60 mm (so-called endless briquette) Pressing pressure: 900 kg/cm² Hopper diameter: 1000 mm Dimensions: 1850 x 1170 x 1510 mm Weight: 770 kg Features: Hfjdpfxjyh Nfhs Ahnsi Hydraulic unit: 7 pressing cycles/min SIEMENS LCD programmable touch control panel Manual or fully automatic operation possible – SIEMENS PLC control Dual pressure gauge for improved pressure monitoring Briquetted material level probe Oil level probe Preheating unit for operation in low temperature environments Inspection window Can be connected to other machines in a production line Voltage: 400V – 50 Hz Moisture content of processed material must not exceed 18%

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, A used briquette press C.F. Nielsen BP 5000 in very good condition Hjdpfx Ahowiw Rxenefi

Condition: excellent (used), functionality: fully functional, BRIQUETTING machine , HYDRAULIC , AUTOMATIC , model POR STANDARD second hand machine working conditions : Excellent briquette cutter system CE mark : Yes briquett diameter mm. 65 briquett length mm.50 / 300 production from 60 kg. to 90 kg./hour motor power Hp 7,5 Hedow E Iyispfx Ahnsfi net weigth kg. 800 overall dimensions cm.195 x 110 H=cm.150 volt. 380/50

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: HaRo2020, total width: 800 mm, total height: 1,100 mm, total length: 1,200 mm, briquette diameter: 60 mm, overall weight: 300 kg, warranty duration: 12 months, type of input current: AC, input voltage: 400 V, power: 3 kW (4.08 HP), Equipment: emergency stop, Our new HaRo2020 briquetting press, with a capacity of up to 40 kg/h, automatic tongs, and pre-compactor, is manufactured by ourselves. You can only purchase this machine directly from us, as we do not use intermediaries. The briquetting presses are CE-compliant and manufactured according to the latest standards. Since we produce most of the components in-house, we can offer the machine at a particularly competitive price. Price is exclusive of VAT. The new hydraulic unit is equipped with a SILENCE-PUMP, making the machine extremely quiet in operation. Another benefit of the helical gearing in the pump is increased durability. Everything is made in Germany! You are welcome to visit us and test the machine with your own material. When purchasing our briquetting press, you will receive a detailed and comprehensive German (PDF) operating manual for this machine. The input material must have a moisture content below 15%—ideally 10 to 12%—for sawdust and planer shavings. Technical Data – Hydraulic unit: 3.0 kW (connected load) – Power consumption per hour: approx. 1.8–2.0 kWh – Throughput: approx. 15–40 kg/h – Voltage: 400 V – Frequency: 50 Hz – Circuit protection: 16 A plug – Power cable length: 3 m – Hydraulic control with Bosch Rexroth valves – Briquette diameter: 60 mm (length varies according to material) – Motor equipped with motor protection switch and emergency stop—for operator and machine safety, including motor protection – No electronic components prone to failure such as controllers, sensors, or complicated electronics – Pressing without additives – Counter-pressure adapts fully automatically to your material – Thanks to the pre-compactor, bulky shavings are no problem – No adjustments or monitoring of the pressure required – Fully automatic operation Spare parts supply is guaranteed, as we manufacture the machines in small series in our facility in Germany. The large oil tank ensures that the oil will not overheat during continuous operation. Hsdpfjw A Hvdjx Ahnjfi Machine dimensions: Length: 1.25 m Width: 0.82 m Height: 1.11 m Feed hopper: Diameter approx. 80 cm x height 60 cm Weight: 300 kg The briquetting press is immediately operational and does not require installation—just plug it in and start working. The machine can be viewed and tested on-site. You are welcome to send us a sample of your material for testing; we find this is the most effective method.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 109, briquette diameter: 80 mm, overall weight: 1,450 kg, TECHNICAL DETAILS Briquette type Briquette diameter: 80 mm Motor power: 11 kW Production output: 80 - 210 kg/h Machine performance Cycles per minute: 7 Number of cylinders: 3 Max. discharge length: 70 mm Container Ring diameter: 1,200 mm Container capacity: 1 m³ Hedpfsxyi Ihjx Ahnefi MACHINE DETAILS Dimensions and Weight Dimensions (L x W x H): 2,100 x 1,350 x 1,600 mm Weight: 1,450 kg Electrical Data Supply voltage: 400 V Frequency: 50 Hz Max. material moisture: 15 % EQUIPMENT Hydraulic oil machine Monoblock clamping system Capacitive sensor for automatic operation Viewing window End-of-cycle system Electronic pressure gauges for pump and clamping pressure Siemens touchscreen PLC Siemens display Operating hours counter Inductive limit switches LED machine position indicator Stamping unit Preheating system Oil level and temperature sensor Preparation for oil cooling in tank and material outlet Power stabilizer Service tools