briquette DM 60 mm
capacity 90 kg/h
motor power 5,5 kW, 400 V, 50 Hz
hopper / bunker 1528 x 1528 mm
dimensions approx. L x W x H = 2100 x 1950 x 1700 mm
Ddnd8bv
weight 950 kg
Advise used machines:
• Technical data without obligation, mistake and intermediate sale reserve.
• Price is considered ex-location price
• All articles or machines are bought as seen without any entitlement on warranty.
• It is left to the choice of the buyer to view the machines before at its location.
• Special ar...
* Plant currently in pre-run
Very robust machine with high pressing force and permanent agitator
- is also suitable to already produce a saleable briquette quality * depending on the material. The large dimensioned press cylinder and the 80 mm briquette make this possible.
Our best selling briquetting press series
+ Tried and tested, simple technology, for extremely low susceptibility to faults
+ 25 years of experience, further development and know-how
+ More than thousand machines of this serie...
The iSwarf 440 and 550 briquetting presses offer the ideal solution when it comes to processing short, loose metal chips left over from the processing of non-ferrous metals, steel and cast iron parts or other metals such as aluminum and magnesium. Depending on the base material, the capacity is from 135 to 500 kg/hour in aluminum. Price is from and depends on the desired configuration, capacity and briquette density (residual moisture content). Delivery time in consultation. Price requests only...
CF NIELSEN BPU 3200 briquetting unit with BS 350 briquette saw in very good condition (with appr. 2000 working hours) main features:
BPU 3200 briquetting unit
Self contained unit including frame, briquetting press, buffer silo 0,4 [m3], dosing screw and control panel.
22 kW main motor 1400 RPM 3x400 V 50 Hz (1750 RPM 3x480 V 60 Hz USA/Canada)
Feeding unit, which pre-compresses the raw material and places it in front of the piston in order to give each piston stroke an optimum output at a st...
The press can be inspected on site and a test pressing can be carried out with your material.
The press is built on a forklift frame for easy transfer and only needs a 32 A socket to start operation.
It has only run for 2901 operating hours. The press is fully automatic and has been in 24 hour operation. It is sold because the briquette form is too large for our conveyors.
Bjcmdctpki
The efficient and compact Hydraulic Briquette Press is sold by it's owner that has worked and looked after it. This machine can make your production left overs into highly appreciated bio fuel products.
Technical specification:
Input materials: saw dust, wood chips, wood shavings of various hard and soft wood, as well as peat, crushed off cuts, old wood and other production residues.
Produced product: RUF standard (square) briquettes, 150x100x60mm
Packaged product: 12 pieces is a 10 kg bag
Prod...
Very robust machine with high pressing force
- is also suitable to already produce a saleable briquette quality *depending on the material. The large dimensioned press cylinder and the 65 mm briquette make this possible.
Our best selling briquetting press series
+ Tried and tested, simple technology, for extremely low susceptibility to faults
+ 25 years of experience, further development and know-how
+ Several thousand machines in operation with satisfied customers
+ Good price-performance ratio...
Hydraulic briquetting press with 5,5 kW main motor. It produces 50mm diameter briquettes. Capacity of the machine is: 30-50 kg/hour. The raw material hopper is 1m3, and has an agitator on the bottom. The machine has an oli cooler for the continous work.
2sfpxy
Briquette press Gross
Machine has been serviced
Main motor 5.5kw
Production max 70 kg/h depending the raw material
Diameter of Briquette 60mm
Weight 750kg
Jcdm8a7
diamensions 1315mm x 1900mm x H1410mm
List price basic machine net: 79.995 € plus VAT.
Requirements:
- Material must be free-flowing (less than 18 mm)
- Material must be pure, ash content less than 0.9 % ATRO
Attention with: sand, stones and minerals
- it is pressed by pressing tongs
- Material must be dry, maximum 15 % ATRO
New: Innovative combination of briquette and pellet
Options against surcharge:
Plant engineering / mütek system technology:
- mütek Shredder MRZ shredding technology
- conveyor belts
- Overbelt magnets
- Extract...
Demonstrator as good as new for sale at a special price
Briquetting plant consisting of:
RUF briquetting press for rectangular briquettes
and mobile dust extractor MMJet 160
Bg7mv7bx9n
List price net: 64.995 € plus VAT.
RUF briquetting press for rectangular briquettes
Very robust and established machine, immediately available from stock Filderstadt.
The ideal machine for professional, industrial briquette sellers.
Type Classic - throughput up to 425 kg / h *depending on material
Options against ...
We part with our demonstration machine
14 operating hours and therefore as good as new * Includes 1 year warranty.
Your advantages:
+ very robust, simple technology
C7m2mgj
+ Top price-performance ratio
+ Suitable for continuous operation
+ Long-standing, well-functioning / established machine
Including control cabinet with timer operation
Press is switched on manually and then runs until the time set on the timer (e.g. 4 hours) has elapsed. Then the press switches off.
Technical data:
Briquette...
We part with our demonstration machine
15 operating hours and therefore as good as new * Includes 1 year warranty.
Your advantages:
+ very robust, simple technology
+ Top price-performance ratio
+ Suitable for continuous operation
+ Long-standing, well-functioning / established machine
Including control cabinet with timer operation
Press is switched on manually and then runs until the time set on the timer (e.g. 4 hours) has elapsed. Then the press switches off.
Technical data:
Briquette dimensi...
Technical characteristics
Hydraulic pusher
matériel haut de gamme
moteur hydraulique 11 kW
Ø briquette 70 mm
production horaire 150 kg max
vis horizontale d’amenage des copeaux
gestion température d’huile
Bmdkihy9dm
mâchoires chromées
contrôle SPS
Power and Motors
Overall dimensions
To be sold at a special price
List price: € 48,500 net
Our best-selling briquetting press series
+ Tried and tested, simple technology for extremely low susceptibility to errors
+ 25 years of experience, further development and know-how
U9ud82upt
+ Several hundred machines in use with satisfied customers
+ Good price performance ratio
-
Briquetting press NEM 300
* Including oil cooler.
Throughput up to approx. 170 kg per hour
in the last test with aluminum chips approx. 130 kg per hour + the ...
pressure 50 t
stroke 250 mm
throat 265 mm
table: 700 x 450
ram surface 550 x 300 mm
Beojfhitbb
total power requirement 4 kW
weight of the machine ca. 1,7 t
50 mm
roll diameter 150 mm
revolutions per minute 10 U/min
voltage 400 V / 50 V
adjustment movement hydraulic up to 120 mm
motor speed 1400 U/min
Tlvmt3hi
total power requirement 1,5 kW
weight of the machine ca. 430 kg
dimensions of the machine ca. 1200 x 800 x 1750 mm
In this offer you acquire a used colour production system "Xerox 800 Colour Press ".
Item for sale:
1 x Xerox 800 Colour Press with the following equipment:
incl. 2x large capacity stacker LCS-1
Hvxumcy
incl. Finisher Interface Module A-GW01
incl. Paperdeck JCF-1
incl. Free Flow Controller
Counter readings:
Total: Approx. 17,171,752 pages
Colour: Approx. 15,509,952 pages
Black: Approx. 1,661,800 pages
Condition:
This is a used machine and may show signs of use (minor s...
pressure 60 t
stroke 380 mm
table surface area 750 x 260 mm
press capacity 588 kN
Pressure power 259 bar
working width 750 mm
pressing speed 2,07 mm/sec
feed speeds 8,69 mm/sec
Fg9qx9eb3
return speed 10,79 mm/sec
Ø 210 mm
total power requirement 1,5 kW
weight of the machine ca. 0,6 t
dimensions of the machine ca. 1,3 x 0,8 x 2,1 m
This 60 ton motorized workshop press with sliding cylinder is very robustly
built and manufactured in the Netherlands. The hydraulics work extremely
precisely in...
pressure 50 t
490,5 kN
Pressure power 399,5 bar
140 mm
working width 1100 mm
Dimensions (HxWxD) 2050 x 760x 1100 mm
column daylight 750 mm
Bjtom0pnpl
distance between columns 300 mm
piston stroke 160 mm
weight of the machine ca. 309 kg
pressure:400 t
distance between columns:1100 mm
stroke:250 mm
2wdpz2jj
no. of strokes:25 - 75 /min
distance table/ram, max. stroke up, adjustment up:900 mm
table surface area:1100 x 965 mm
capacity of ejector in table:30 t
ejector stroke of ejector in table:80 mm
capacity of ejector in ram:3 t
stroke of ejector in ram:60 / 70 mm
ram surface:980 x 800 mm
column travel -side:800 mm
ram adjustment:20 mm
power capacity:80,0 + 5,5 kW
weight:47,0 t
Dimensions (WxDxH):3,5 x 3,3 x 6,0 m
weight of switch...
Spindel Press Krause
Eoaxjnybs
Year - Serial-No. 190675
-We would be very pleased with your visit - more machines on Stock-
-Available Immediately-
-Can be inspect-
-On Stock Emskirchen / Nürnberg - Can be test-
⢠Minimal footprint
⢠Height continuously adjustable
⢠Suitable for 2- and 4-up
Bjfhulirbn
Low-cost shipping The Smart Stacker XXS has been developed in order to enable CtP users in the 2- and 4-page format a space-saving and cost-effective possibility of plate stacking. On a footprint of only 640 x 658 mm, up to 100 plates are automatically stacked by that stable âlightweightâ made in Germany. Low-cost shipping due to a package size of 118 x 78 x 17 cm (L x W + H) and weight of only 1...
In this offer you acquire a used colour production system "Xerox 800 Colour Press ".
Item for sale:
1 x Xerox 800 Colour Press with the following equipment:
F0tcajgd
incl. 2x large capacity stacker LCS-1
incl. Finisher Interface Module A-GW01
incl. Paperdeck JCF-1
incl. Free Flow Controller
Counter readings:
Total: Approx. 17,171,752 pages
Colour: Approx. 15,509,952 pages
Black: Approx. 1,661,800 pages
Condition:
This is a used machine and may show signs of use (minor ...
Forging line INVER PRESS LECCO 100 T built in Italy. Brass forgings were made on the line from a solid rod fi 19. After swelling, we get a diameter of fi 24. Product lengths: from 25 to 50 mm.
The forging line consists of the following devices:
1. INVER PRESS LECCO 100 TON forging press, eccentric with pneumatic clutch, pressure: 100 tons
- dimensions of the eccentric press (width x length x height): 1750 x 1100 x 2100 mm
2. AMYSA WMU V-10x induction device made in Italy:
- induction heating ba...
pressure 15 t
stroke 160 mm
press capacity 147,15 kn
Pressure power 382,2 bar
column daylight 555 mm
80
tank capacity 1,5 l
distance between columns 134 mm
weight of the machine ca. 134 kg
dimensions of the machine ca. 825 x 600 x 1880 mm
Vy2xfohj
pressure:400 t
distance between columns:1060 mm
stroke:450 mm
no. of strokes:15 - 30 /min
distance table/ram, max. stroke up, adjustment up:1160 mm
table surface area:1000 x 700 mm
capacity of ejector in table:2 x 16 t
ejector stroke of ejector in table:125 mm
Die cushion pressure in table:120 t
Die cushion stroke in table:2 mm
capacity of ejector in ram:2 x 4 t
stroke of ejector in ram:100 mm
ram surface:1000 x 700 mm
Fe7ib0b
column travel -side:630 mm
power capacity:55,0 kW
weight:50,0 t
die c...
Spindle Press Krause KgS
Jiciqnz
Year - Serial-No. KgS
-We would be very pleased with your visit - more machines on Stock-
-Available Immediately-
-Can be inspect-
-On Stock Emskirchen / Nürnberg - Can be test-
pressure 100 t
stroke 380 mm
table: 1740 x 996 mm m
daylight between the columns 1050 mm
daylight - vertical 600 mm
total power requirement 2,2 kW
weight of the machine ca. 1,6 t
Gvufe0
dimensions of the machine ca. 1,7 x 1,7 x 2,2 m
In this offer you acquire a used colour production system "Xerox Rialto 900 Inkjet Press ".
The Rialto 900 closes the gap between high-speed inkjet production printing systems and cut sheet systems with toner technology. It combines the speed and economical cost per page of inkjet technology with high print quality and low investment costs.
Item for sale:
1 x Xerox Rialto 900 Inkjet Press with the following equipment:
incl. Double Stacker
incl. cutter
Original price: 710.000€
Fuookcor0
...
Table size 2500 x 1300 mm
Vqos9i
Total thrust 70 Ton
Stroke – total opening 400 mm
N. 4 of cylinders
Pistons D 70 mm
Approx. weight 2400 kg
Fabricated assembled steel platen max. temp up to 120 ° C max working pressure 3-5 kg/cm2
Heating medium pressure 2,5 bar, it is composed by:
G) ALUMINIUM COVERING FOR A BETTER SURFACE FINISHING AND A BETTER HEAT PROPAGATION
H) FLAT GAUGED STEEL SHEET
I) Coil of piping for hot water/oil circulation
J) Reinforcement piping
K) Flat gauged steel plate, only f...
pressure 30 t
stroke 160 mm
table surface area 560 x 255 mm
table length 695 mm
table width 230 mm
Pressure power 374,6 bar
piston stroke 160 mm
Fhjpujh2k
tank capacity 1,5 l
column daylight 560 mm
diameter of piston 110 mm
weight of the machine ca. 175 t
dimensions of the machine ca. 830 x 640 x 2030 m
Unique Cold Hydraulic Presses Specially Designed for Engineered Wood Flooring (Parquet) Production
Technical parameters of our standard MK2 models:
- Max gluing widths - From 200 to 320 mm (Up to 500 mm upon order)
- Max gluing length - 2560 mm to 3840 mm (Unlimited upon order)
- Max gluing height - 800 mm
- Working height - From 800 to 850 mm
- No of pressing cylinders (total) - From 16 to 24 pcs (Unlimited upon order)
- No of independent pressing cycles - From 4 to 12 cycles (unlimited upon ...
PRESS FARELL 150 TN FOR WOOL ... THIS PRESS MAKE SPECIAL MESURES BALES FOR EXPORT IN FCL... BALE MESURES 1170 X 720 X 1150MM WEIGHT BETWEEN 300/350 KG EACH IN CLEAN WOOL DEPENDS ON KIND OF WOL , HIGH PRODUCTION 900/1000 KG HOUR, WITH HIS OWN STORAGE FILTRED MATERIAL, FILTRET ACROSS A CONDENSER SPECIAL WHO DEDUST THE MATERIAL BEFORE GOES TO STAORAGE PRESS PLACE, AND WITH TRUTZSCHSLER AUTOMATIC FILTER FOR THE AIR ABSORBED BY THE CONDENSER.... REALLY GOOD AUTOMATIC INSTALLATION.
Bpoh98xw
In this offer you acquire a used 5-colour production system "Xerox 1000 Colour Press".
Item for sale:
1 x Xerox 1000 Colour Press with the following equipment:
Ykguo
incl. Stacker LCS-1
incl. Finisher Interface Module A-GW01
incl. Paperdeck JCF-1
incl. FreeFlow Controller
Counter readings:
Total: Approx. 5,265,956 pages
Colour: Approx. 4,754,305 pages
Black: Approx. 511,651 pages
Condition:
This is a used machine and may show signs of use (minor scratches or yellowing)...
Press-vite ironing / steam table 4 whirlpool hoods, 9000W BJ. 2002, Pr12LP +.
You buy a hanger system
Ironing / steam table press vite, with 4 adjustable hot tub covers, and 2 steam generator / en working width approx. 340 cm, 380VPr12LP - 9000W
BJ 23.10.2002
Control GE VAT20 U20NOK7S
BJ. 16.02.2002
Dv7r7m
Find more articles in our shop!
Article number 17746;
For inquiries please specify;
pressure 150 t
Bhxpscvk
stroke 450 mm
throat 350 mm
work speed 2 m/min
ajustment speed 10 mm/sec
return speed 16 mm/sec
pressure 320 bar
diameter of piston 50 mm
opening stroke 700 mm
table-size hinten / back 2000 x 500 mm
Table dimensions Main500 x 500 mm
total power requirement 4 kW
weight of the machine ca. 6,7 t
dimensions of the machine ca. 2,95 x 2,0 x 850 m
Unique Cold Hydraulic Press Specially Designed for Engineered Wood Flooring (Parquet) Production
Deck Art MK1 (first generation) Cold Press CP 250/2500 (3800)
Technical parameters:
• Max gluing width - 250 mm
• Max gluing length - 2500 (3800) mm
• Max gluing height - 850 mm
• Working height (static) - 800 mm
• No of pressing cylinders (total) - 16 (24) pcs
• No of pressing cylinders per cycle - 4 cycles x 4 cyl. (4 cycles x 4 cyl.; 4 cycles x 2 cyl.)
• No of independent pressing cycles - 4 (8...
In this offer you will purchase a used color production system "Xerox Versant 80 Press "
Item for sale:
1 x Xerox Versant 80 Press with the following equipment:
incl. Staple Finisher A-Fn07
incl. Paperdeck A-CF-1
incl. Fiery E200-08
Meter readings:
Total: Approx. 730,183 pages
Color: Approx. 263,720 pages
Black: Approx. 466,463 pages
Condition:
This is a used unit and may show signs of use (minor scratches or yellowing).
(minor scratches or yellowing) may show.
The de...
Max. pressure: 500t, max. operational temperature: 370°C, oil heated, oil cooled, with a secondary cycle for recirculation of heating output, was overhauled in 2014.
Lydy8clb
pressure 100 t
distance between columns 1500 mm
stroke 380 mm
working feed 2,47 mm/sec
700
adjustment of press crosshead 1500 mm
slide adjustment -horizontal 1740 mm
feed speeds 7,54 mm/sec
return speed 9,06 mm/sec
Pressure power 258 bar
table-size 1740 x 1396 mm
total power requirement 2,2 kW
weight of the machine ca. 2060 kg
dimensions of the machine ca. 1,74 x 2,07 x 2,04 m
This 100 ton straightening press has a manually movable portal and is
exclusively made in the Netherlands.
Thanks...
Good working condition
Manufactured in Romania
YOM: 1986
Brg0g2i9k7
Mechanical
Pressing nominal force: 10,0 MN
Number of strokes/min: 20
Ram stroke: 310mm
Work surface: 2290mm x 1600mm
Total dimensions: 7880mm (6880 from the ground) x 4150mm x 2350mm
Total weight: 108009kg
1 x Xerox 700 Digital Colour Press included
- Fiery Controller E10-02
- Booklet finisher JGW-1 + feeding unit
Counter reading: Total approx. 2,017,686, thereof color 1,605,360, SW approx. 412,326
Features:
- 71 DIN A4 pages / minute B/W
- 71 DIN A4 pages / minute Colour
- Paper formats: DIN A5 - DIN A3
- Grammages: 64 - 300 g/m²
- Cassette: Max. 5,900 sheets
Manufacturer information:
The ideal solution for digital production printing
The Xerox 700 Digital Color Press opens up profitable ap...
The Machineseeker Trust Seal gives buyers the opportunity to see, at a glance, whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Check the address of the dealer
Validation of Bank connection
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal in your advertisements on Machineseeker. In this way, you signal to every potential buyer the seriousness of your company, checked by an independent body. This creates buyer confidence and increases the probability of successfully selling machines. In addition, you have the option of including the Machineseeker Trust Seal on your homepage and in business letters.