Condition: used, Year of construction: 1994, No. 04470 Electro-hydraulic veneer press Joos HP 90 Used, year of construction 1994 Press area 2550 x 1350 LW Gold anodized heating plates, electrically heated Total pressing pressure 90 tons Opening width 400 mm 4 press cylinders each 90 mm diameter Specific pressing pressure with full load 2.75 kg/cm2 Specific pressing pressure with 2 m2 load 4.58 kg/cm2 Operating pressure 355 bar Thickness of the heating plates approx. 51 mm Fsbvrtpowhc Awjbjgb Connected load per plate 9.1 kW Operation with rotary switch Push-button control for opening / closing / stop 2 safety ripcords (all-round) Automatic activation (overrun) of the press cylinders when pressure is released The “Goldeloxal-Decor D.B.G.M.” system makes the surface of the valuable heating plates extremely hard. This results in no scoring, reduced consumption of release agents, shorter working time, no film wear and higher quality veneer work. At the heart of the hydraulic quality press is the hydraulic unit, securely installed in the center of the lower part of the press. This design prevents damage to the motor, pump and other units. The motor, valves and two-stage high-pressure pump are maintenance-free at Joos. With the dynamic piston bearing, the pistons are not bolted to the pressure table but instead rest dynamically on a planed support surface under the pressure table. The table is prevented from tilting and moving by a column guide. A precision rack and pinion parallel guide ensures the synchronization of the printing table. Transport dimensions approx. 2950 x 1560 x 2160 mm LWH Weight approx. 3600 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as viewed” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse or location

Condition: used, knife: planer blade Z4 flight circle (ø): 125 mm Fjbvrtpor A Icaobsgb drilling: 40 mm length: 60 mm

Condition: used, Year of construction: 2003, Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Year: 2003 - Documentation available: No - CE mark available: Yes - Serial number: 03/1792 Fsbvswcgcwertpbogb Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2023, Working dimension X: 3.117 mm Working dimension Y: 2.177 mm Working dimension Z: 150 mm Number of milling spindles: 1 Blow-off device: Yes Main motor power: 14 kW Rotation speed max: 24.000 rpm Torque support: Yes 4th axis: C-axis Tool clamping system: HSK-F63 Tool changer positions: 18 SCM Tool changer FAST 18: Yes Vertical drilling spindles: 12 SCM Drilling aggregate F 20 LL: Yes Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 4 Groove saw: in Y-direction, in X-direction Gantry machine: beidseitig angetriebene Gantrymaschine Machine table: Matrix table Multi-zone vacuum: Yes Positioning aid: Yes Point-type laser: Yes Vacuum pump: Yes Number of vacuum pumps: 2 Capacity vacuum pump: 500 m³/h Suitable for nesting: Yes Labelling: automatic Barcode reader: Yes Safety device: Bumper SCM Pro-Space: Yes Interface for .dxf data: Yes SCM TecPad: Yes Fgsbvrtjwin Rpepbeb Workpiece length measurement: Yes Werkstückdickenmessung: Yes Unloading unit: Yes Automatic central lubrication: Yes Control cabinet cooling: Yes Control: SCM eye-M PRO

Condition: used, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm control Weinig, PC-Nexus # 2781 Weinig Unicontrol 6 Online ----- Machine will be cleaned and completely checked before delivery Technical data summary (please enquire about any additional accessories included) Item 1: Cross-cut saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.7 kW > Laser aiming light for detecting the saw section Length stop CNC controlled ----- > Length 3500 mm > Electronic length stop including positioned cross-cut saw Item 2: Tenon and slot spindle ----- > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Spindle stroke vertical pneumatic: 240 mm for wood thickness 68 - 92 mm > Spindle speed: 3000 rpm > Tool flight circle max. 320 mm > Spindle diameter: 50 mm > Tool diameter max.: 360 mm > Motor power: 11 kW Item 3: 1. Profiling spindle (same and opposite rotation) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 7.5 kW Item 4: 2. Profiling spindle ----- > Position: vertical right > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Spindle stroke vertical pneumatic: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 2 axially clocked feed rollers opposite the profiling spindle, for the production of narrow, short parts (e.g. glass-parted rungs) Rung guide consisting of: Rung support bar from above in the area of ??the profile milling unit vertically right and profiling spindle. Pos. 5: Profile milling unit horizontal top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed ??5,850 rpm > Tool flight circle max. 130 mm > Axial adjustment range 30 mm, 2 positions Fgebvrtjv E R Ikjpbsb > Radial adjustment range 125 mm, 4 positions, manual Pos. 6: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions using pneumatic turret > Radial adjustment range 110 mm, 8 positions using pneumatic turret > Spindle speed: 5850 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 210 mm > Motor power: 3.8 kW Other features ----- > online-capable > Electric feed height adjustment including mechanical digital display and manual feed bar clamping > Rebating device for tear-free rebating > Milling carriage for milling sashes with frame widths of less than 500 mm. Automatic pneumatic clamping. Minimum frame height 450 mm > Double parts package > Return conveyor for 1-man operation: swivel belt > Screen control > Studio window device > Electronic angle display for studio windows > Industrial PC, with Windows PC control/NEXUS Extraction nozzle diameter: -----...

Condition: used, Year of construction: 2009, table length: 2,600 mm, power: 7.5 kW (10.20 HP), table width: 920 mm, No. 04469 Spindle moulder / swivel spindle milling machine Casolin F 45 KL EVO Used, year of construction 2009 Very heavy version with full equipment Control unit EVO EL 2 with programming functions The body of the machine consists of one part Spindle swivels +/- 45.5° on both sides 4-axis control EVO Spindle diameter 30 mm Effective height of the spindle 140 mm Maximum tool diameter for profile milling 250 mm Maximum tool diameter for tenoning 300 mm Motor power 7.5 kW Direction of rotation right/left Speeds 3000 / 4500 / 6000 / 8000 / 10000 rpm Table with extensions 2600 x 920 mm LW Including 3-roller feed unit Maggi 2 suction connections each 120 mm diameter Transport dimensions approx. 2600 x 1500 x 2000 mm LWH Weight approx. 1350 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Fobowhck Uevrtpbogb Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as viewed” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse or location

Condition: used, knife: WP Z2 flight circle (ø): 100 mm drilling: 30 mm Fgobvot Starsrtpbob width: 60 mm material: steel Replacement blades: On demand

Condition: used, Year of construction: 2004, Cutting length: 4.300 mm Pusher stroke: 4.250 mm Number of grippers: 7 Fgjbvrtowin Rijpbsb Feedrate max: 100 m/min Continuously variable feed: Yes Saw blade projection: 80 mm Saw blade diameter max: 350 mm Main motor power: 9 kW Scoring saw: Yes Labelling: manually Stop side: Right side Optimization: Yes HOLZMA CAD-PLAN: Yes Control: HOLZMA HOMAG CADmatic Conformity marking: CE mark

Condition: new, Number of motors 2 Stück 0 3000 mm Control ja/CNC loading dimensions L x W x H 4000 x 1500 x 1500 mm Weight 800 kg HECHT double miter saw Exenso DS350E - 3000 mm ----- For wooden glass strips, rungs, profile strips, aluminum strips, etc. Pos. 1.1 Article number 942.5103 1 piece HECHT Exenso DS350E - Working length 3000 mm - Swivel range 22.5° (inside) to 135° (outside) - Right head movable - Saw blade holder Ø 350 mm - Incl. 1 piece center support. - Units clamped pneumatically. - Positioning control Exenso DS3 with touch panel 15" display in dust-proof monitor housing. - 3-axis control, 1 longitudinal axis and 2 swivel axes. - Entering the cutting data by hand - Processing data from a cutting list (data set according to specification) - Processing measuring rod data (GMF wireless caliper) - Ethernet connection 10/100 (TCP/IP) - USB interface Fgebvovzt D Tjrtpbeb - Incl. control cabinet, motor and software licenses. Item 1.2 Item number 723.0121 2nd DS saw blade wood Bevel/bevel/flat tooth - positive Item 1.3 Item number 942.5236 2 sets of DS workpiece clamping combined Combined workpiece clamping consisting of: Pneumatic swivel clamp - for clamping the material from above. (Free access to the work table) Pneumatic horizontal clamp - anti-twist clamping cylinder with pressure piece. The clamps can be selected individually via the saw control. The clamping sequence can also be set via the control. Including safety pre-tensioning pressure Scope of delivery for 2 sets: - 2 pieces (left/right) vertical swivel clamps. - 2 pieces (left/right) horizontal clamps. Item 1.4 Article number 942.5997 DS pneumatic feed device Item 1.5 Article number 945.2007 Packaging DS350 (transport frame) ----- Total price in this version - on request! ----- ALTERNATIVE options, prices on request! ----- For horizontal clamping of the remaining pieces with blunt glass strips instead of the 2nd set Item 1.3 943.5236 DS workpiece clamping combined! Pos. 2.1 Article number 942.5201 ES / DS workpiece clamping from the front - 2 clamping cylinders with anti-twist protection - 2 cylinder holders with clamping lever ----- For rebated glass strips, instead of standard panels without a groove: Pos. 2.2 Article number 942.5241 DS350 table supports grooved according to customer sample The assembled table supports are milled according to the customer's drawing. Please send us all profile drawings that are to be sawn (pdf, dxf and hand samples) ----- If, for example, aluminum is also to be sawn: Item 2.3 Article number 942.5203 DS hydropneumatic feed device (instead of pneumatic feed cylinder) ----- OPTIONAL accessories, with additional charge on request: ----- Item 2.4 Article number 942.5237 DS "Excess length" software (subsequent steps must be confirmed) Sequence control including hardware. After entering a cutting dimension > max. cutting length of the system, the cutting is carried out in a cyclical manner. (Left unit cuts, right unit moves the material and cuts to size.) ----- Item 2.5 Article number 944.1023 GMF caliper 3000mm complete set (1500mm plus extension 1500mm) incl. charger and receiver. A robust aluminum measuring rail with a measuring ran...

Condition: used, Year of construction: 2011, No. 04420 Universal brushing machine Braun Rustika 300 -2 Used, Year of manufacture 2011, very few operating hours! The Braun Rustika 300 -2 is used to produce textured wood surfaces and to polish stained or varnished surfaces 2 sanding units Sanding width 300 mm Max. Passage height 100 mm Height adjustment by hand crank Brush diameter 150 - 200 mm Feed belt motor-driven Feed speed 4 m/min 3x height-adjustable pressure rollers Motor power: 1st brushing station 4.0 kW / 2nd brushing station 3.0 kW 2x suction nozzles diameter 100 mm Incl. 3 spare brushes, technical documentation and operator tools New price of the machine + accessories 19.000,- € Transport dimensions approx. 1650 x 900 x 1600 mm LWH Weight approx. 500 kg Fgjbvrer Hpx Ajtpbsb To avoid possible misunderstandings, an inspection on site is possible and recommended by appointment Sold as is Technical data, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: "purchased as inspected" Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, knife: PM Z2 with deflector flight circle (ø): 110 mm drilling: 30 mm width: 65 mm Fobst Sta Ssvrtpbegb Labelling: MAN material: steel

Condition: used, Year of construction: 2002, Technical principle: Cycle press Panel length: 2.500 mm Panel width: 1.300 mm Side pressure cylinders: 5 Fgebvowin Rcjrtpbeb Heating plates: thermal oil heated Operating temperature max: 120 °C Conformity marking: CE mark Total connection: 29 kW

Condition: used, 0 800x600 mm Motor output 18,5 kW 0 0,6 m³ Diameter of the motor 252 mm Dimensions (L/W/H) 1700x1130x1595 mm Weight 1300 kg Number of working hours 1741 h WEIMA shredder WL 4, machine completely checked ----- Note: The machine has been completely checked by us, it is running perfectly, see video. The blade and slide plate have already been replaced by the previous owner. We replaced the V-belt during the inspection. Description: The Weima high-performance shredders with their flexible application options can process all types of wood materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer residues, etc.) into fuel chips and achieve an enormous reduction in the volume of the material in the case of bulky materials. Fgebvrtjvvx Dzspbsb Function: The machine is equipped with a large filling hopper and can be fed using a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without the need for manual assistance. The hydraulically controlled slider feeds the wood waste to be shredded to the cutting area of ??the rotor and is controlled automatically and depending on the load. The internal slider guides are made of highly abrasion-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are cardanically suspended to avoid transverse forces on the piston sleeves. The patented and profiled V-rotor made of solid steel has a diameter of 252 mm and works at a rotor speed of 80 - 120 rpm. The concavely ground, aggressive and 4- way rotating knives / cutting crowns are located in milled knife pockets on special knife carriers. This patented system guarantees high throughput, low energy consumption and optimal discharge of the shredded material by reducing the cutting gap between the counter knife and the rotor for the first time. The screen mounted under the rotor determines the chip size (10 - 100 mm). A hydraulically opened screen basket is also available on request. The power is transmitted from the electric motors via V-belts to a strongly dimensioned gear, which is mounted on one side of the rotor on the shaft stub. Technical data WL 4 / 18.5 kW ----- Feed opening: 600 x 800 mm Standard hopper capacity: 0.6 m³ Rotor working width: 600 mm Rotor diameter: 252 mm Power: 18.5 kW Rotor speed: approx. 90 rpm Sieve diameter: 15 mm Paint finish: Weima standard RAL 2002 / 7016 Connection value: 400 V +/- 5% / 50 Hz Weight: approx. 1,300 kg Includes: Electrical control (Moeller / Siemens / Allen-Bradley) Control cabinet (Rittal / Sarell) Concavely ground cutting crowns (40 x 40 mm ) Sterntriangular start Vibration-damping foundation V-rotor (patented) with knife pockets milled into the profile (technical information according to the manufacturer - no guarantee!)

Condition: used, knife: WP-Z2 V4 Fgoboudfymevrtpbeb flight circle (ø): 125 mm drilling: 30 mm length: about 60 mm material: steel

Condition: used, Year of construction: 2005, Chain-/cutting width: 300 mm Opening width: 950 mm Cutting height: 110 mm Workpiece length min: 390 mm Fgebvrtpswin N Sebeb Saw shaft diameter: 70 mm Rotation speed sawing spindle: 4.200 rpm saw bushing: Yes Heigth work table: 750 mm Workpiece feed: Chain, honeycomb grid Feedrate max: 48 m/min Continuously variable feed: Yes Anti-kickback saftey device: top Conformity marking: CE mark Weight: 1.770 kg

Condition: used, Working width 3550 mm Working height 2250 mm Number of cylinders 5 St. loading dimensions L x W x H 4500 x 900 x 2600 mm Hess Speedy frame press ----- Machine is functionally tested Insertion dimension / press length max. 3,550 mm Insertion dimension / press height max. 2,250 mm Fobvevn U Rusrtpbegb Sliding carriage for width adjustment, locking in 50 mm Double hole grid system Electrical height adjustment of the long-stroke cylinders (hydraulic) Insertion height of the abutment plates can be preselected in 4 positions 3 vertical pressure cylinders stroke 1000 mm Pressure force per cylinder 2000 kN / 20000 N 2 horizontal pressure cylinders stroke 80 mm Pressure force per cylinder 1250 kN / 12500 N Pressure plate depth 100 mm width 140 mm Cylinder fixation / abutment grid 50 mm Medium pressure beam with shut-off valve Final pressure shut-off and post-pressure control Control and press sequence in touch button operation Adjustable pressing pressure min. 25 – max. 160 bar Electrical connection 2.2 kW / 400V Control for gluing sloped windows 2 pendulum pressure plates 45 degrees Machine dimensions W=4500 mm, D=900 mm, H=2600 mm Weight approx. 1800 kg Pictures original. Video not original, shows identical model (technical data according to manufacturer - no guarantee!)

Condition: used, knife: planer blade Z4 flight circle (ø): 120 mm drilling: 35 mm length: 60 mm Febvrteuaclfjpbegb material: steel Replacement blades: On demand

Condition: used, Year of construction: 2006, Profile width max: 280 mm Profile width min: 40 mm Profile thickness max: 80 mm Feedrate max: 60 m/min Continuously variable feed: Yes Gluing aggregate: Yes Fgsbvrtewin N Espbjb For plastic foil: Yes For paper- based laminates: Yes For veneer: Yes Glue application by roller: Yes Suitable for hot melts: Yes Conformity marking: CE mark Total connection: 36 kW Space requirement Length: 5,8 m Space requirement Width: 1 m Space requirement Height: 2,1 m

Condition: used, Number of spindles 6 St. Working width 240 mm Working height 200 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-36 m/min. SCM Superset PLUS Comp. 31 also for window production ----- Technical data: ----- Working width: max. 240 mm Working height: max. 200 mm Feed: 6 to 36 m/min 1. Spindle ----- First lower spindle horizontal Motor with brake 11 KW Diameter: 40 mm Speed: 6,000 rpm 2. Tool holder HSK ----- First right tool holder vertical Motor with brake 7.5 KW Speed: 8,300 rpm Vertical and horizontal electronic positioning 3. Tool holder HSK ----- First left tool holder, vertical Motor with brake 7.5 KW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic adjustment of the tool diameter (setup) 4th spindle ----- First upper spindle, horizontal Motor with brake 11 KW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic adjustment of the tool diameter (setup) 5th spindle ----- Second upper spindle, horizontal Motor with brake 7.5 KW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic adjustment of the tool diameter (setup) 6th spindle ----- Second lower spindle, horizontal Motor with brake 7.5 KW Speed: 8,300 rpm Vertical and horizontal electronic Positioning Other technical features: ----- 2 feed units after the upper spindles for shortening the axis distance from 620 mm to 450 mm Air cushion lubrication in the work table Flange feed rollers before and after the left vertical spindle with electronic (CNC) telescopic adjustment Fgobvevnv Uzsrtpbjb 2 x milling unit with belt drive with quick-change system HSK 85 in position 2 – 3 Working height 200 mm instead of 120 mm 5 x electronic horizontal positioning position (2 – 3 – 4 – 5 – 6) + (31.14.05 tandem feed after position 2) 4 x electronic vertical positioning position (2 – 3 – 5 – 6) 3 x electronic setting of the tool diameter (setup) position (3 – 4 –5) Mobile control 10 PRL equipment for removing the glass strip on the 2nd upper horizontal spindle Machine without processing tools Option: SCM RP-S NT transport system for returning the workpiece to the operator, see more Pictures under stock number 6793 (technical data according to the manufacturer - no guarantee!)

Condition: used, knife: Centrolock reversible blade Z2 Febvewgz Ezjrtpbegb flight circle (ø): 93 mm admission: PowerLock HSK length: 150 mm material: steel

Condition: used, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Control Weinig PowerCom Weinig Powermat 500 for window production Machine is reconditioned and functionally checked ----- Short summary: ----- 6 Spindles with 8,000 rpm and 7.5 KW 5 x HSK/Powerlock Window package with glazing bead separation Spindles axially and radially CNC controlled right and upper spindles with common pneumatic timing for Glazing bead cutting Large control Powercom with touchscreen Detailed description: ----- Tool arrangement No. 018 for window production Technical specifications: ----- Working width 20 - 230 mm (at tool cutting circle 93 - 125 mm) Working height 8 - 120 mm (at tool cutting circle 93 - 125 mm) 1. Tool holder ----- First lower tool holder Motor with brake 7.5 KW Diameter: 40mm Speed 8,000 rpm including high-performance ball bearings Tool flight circle 125 - 180 mm In connection with PowerLock 93 - 180 mm Axial adjustment range 17 mm Hardened table insert in front of the 1st lower tool holder 2. POWERLOCK/HSK tool holder ----- First right tool holder Motor with brake 7.5 KW Speed 8,000 rpm including high-performance ball bearings Tool flight circle 93 - 200 mm Maximum throat depth 35 mm Axial adjustment range for spindle 80 mm Axial adjustment range for PowerLock 55 mm Adjustment path radial Min. tool diameter at stop level 93 mm Max. tool diameter behind stop level 200 mm Axially and radially CNC controlled 3. POWERLOCK/HSK tool holder ----- First left tool holder Motor with brake 7.5 KW Speed 8,000 rpm including high-performance ball bearings Tool flight circle 93 - 200 mm Tool cutting circle for straight cutter heads max. 163 mm Maximum throat depth 35 mm Axial adjustment range for spindle 80 mm Axial adjustment range for PowerLock 55 mm Pressure shoe in front of the left tool holder, including 2 lateral pressure rollers, spring-loaded Axially and radially CNC controlled 4. POWERLOCK/HSK tool holder ----- First upper tool holder Motor with brake 7.5 KW Speed 8,000 rpm including high-performance ball bearings Tool flight circle 93 - 200 mm Tool cutting circle for straight cutter heads max. 163 mm Maximum throat depth 35 mm Adjustment path axial 40 mm Axially and radially CNC controlled Fsbvrevf Raastpbjgb 5. POWERLOCK/HSK tool holder ----- Second upper tool holder Motor with brake 7.5 KW Speed 8,000 rpm including high-performance ball bearings Tool flight circle 93 - 200 mm Tool cutting circle for straight cutter heads max. 163 mm Maximum throat depth 35 mm Adjustment path axial 40 mm Axially and radially CNC controlled 6. POWERLOCK/HSK tool holder ----- Second lower tool holder Motor with brake 7.5 KW Speed 8,000 rpm including high-performance ball bearings Tool flight circle 93 - 225 mm Maximum throat depth 15 mm Adjustment path axial 40 mm Adjustment path radial Min. tool diameter to table level 93 mm Max. tool diameter 6 mm under table level 22...

Condition: used, knife: Centrolock reversible blade Z2 flight circle (ø): 93 mm admission: PowerLock HSK length: 100 mm Fgsbvrtevbhlxepbeb material: steel

Condition: new, Working width 630 mm Working height 3-310 mm Motor output 7,5 kW Number of knives 4-TERSA St. Feed speed 6-20 m/min. Vertikal stroke elektrisch FIMAL thickness planer type SP 63 A ----- NEW MACHINE "Partnership Edition" Technical data / basic equipment: ----- - 4-knife V-shaft, d = 120 mm, speed 4,800 rpm. - Table height adjustment via 4 trapezoidal spindles - chip removal up to 8 mm - Min. / Max. working height: 3/310 mm - Min. workpiece length: 250 mm - Suction nozzle 150 mm - Electrics and protections in accordance with CE standards Fgsbvrtpou Uu U Ujbob - Planing width: 630 mm - Motor: 50 Hz., 5.5 kW / 7.5 HP with manual star-delta switch - Infinitely adjustable feed speed from 6 to 20 m/min. - Motorized table height adjustment with electronic positioning device (Input of planing height via keyboard with electronic display) - Sound level according to EN 27960: 86 – 90 dB(A) Stock machine additionally equipped with the following options: ----- ----- - Motor with 7.5 kW / 10 hp - Thicknessing table extension, 600 mm - 2x rubberized pull-out roller - TERSA system knife shaft, including reversible knives ----- Promotional price from stock: on request! ----- All prices ex warehouse plus VAT/plus. Freight and assembly at cost (Technical information according to the manufacturer - without guarantee!)

Condition: new, knife: planer blade Z4 Flight circle (ø):: 125 mm flight circle (ø): 125 mm Drilling:: 40 mm Fsbeqz A D Uovrtpbogb drilling: 40 mm Length:: 130 mm length: 130 mm Material:: aluminum material: aluminum

Condition: used, knife: Strip planer knife Z2 flight circle (ø): 125 mm drilling: 40 mm length: 170 mm material: steel Fgebvrtpjv Dgm Tebsb