Condition: used, FORMAT 4 profil 45 M x-motion table router -used- swivels to the rear, electric height adjustment, electric tilt, Height and swivel adjustment with positioning control, Positioning control for milling fence, Djb E Ayou R Tcxs Tmecg table extension, extendable support, finely adjustable milling fence, right/left rotation, incl. arc milling fence, Swivel device for feed, integral fence, Year of manufacture 2022 ----- Technical data ----- Swivel range: +5 -45 °, Table size: 2,500 mm, Spindle diameter: 30 mm, Useful length of milling spindle: 140 mm, max. milling cutter diameter: 250 mm, max. retractable cutter diameter: 320 mm, Speeds: 3,500/4,500/6,000/8,000/10,000 rpm, Motor: 7.35 kW, Extraction nozzle Ø: 140 mm, Suction nozzle Ø bottom: 80 mm, weight: 730 kg

Condition: as good as new (ex-display), Year of construction: 2022, Functionality: fully functional, CNC milling machine Portal milling machine type Nesting working area X-axis 2,600mm working area Y-axis 1,300mm working area Z-axis 200mm drive Servo Vacuum table Vacuum pump 100M3/H AdTech CNC Controller UcanCam CadCam Software V11 Standard Dcebov T Akyo E Ay Tmog Endless possibilities: milling, relief, photos, Fusion, contours, smoothing oak leaves, milling DXF- DWG- Logos, ...,.. and much more in materials: mdf, melamine, carbon, Trespa, dibon, Alucarbon, PP, PPE, wood,

Condition: ready for operation (used), Year of construction: 2011, Höcker shredder PHSS 40/110 Technical data: Manufacturer: Höcker Polytechnik Type: PHSS 40/110 Dceb E Ay Tjwfflpemog Year of construction: 2011 Drive power: 22 kW Working width: 1100 mm Rotor diameter: 400 mm Cutting principle: high-speed shredder shaft with counter comb Remark: The machine is in working condition. It has been checked and tested by us in 28816 Stuhr. You can find the video on our website or YouTube channel. Viewings are possible at any time by appointment. We are also happy to carry out tests with your material on request for a fee. We are also happy to answer questions about the machine by telephone from Monday to Thursday from 08:00 to 14:00. On Friday we are there for you from 08.00 to 13.00 h. Please note: All technical data refer to the manufacturer's specifications. We accept no liability for the information provided or for any errors. The offers are non-binding, subject to prior sale and revocable at any time. Viewings are possible by arrangement. The sale is ex works, without guarantee or warranty.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 1,000 h, Functionality: fully functional, overall weight: 2,750 kg, input voltage: 400 V, input current: 32 A, Loymeyer KAM 775S IQ Edgebander Delta 4 touchscreen control Dcob E Ajwf U Rzjy Tmsg Premilling Glue station End cutting Straight/Radius unit Corner rounding Glue scraper Edge scraper Available end of May 2025

Condition: excellent (used), Year of construction: 2015, Feed 16-20m/min Length 9365mm Workpiece Thickness 8-60mm Edge Material Coil: 0.3-3mm Automatic Adjustment Infeed Fence Sliding carriage Separating Agent Spraying Unit Pre-Milling Workpiece Pre-Heating PU Package Including PU60/65 Gluepot and Robatech PU Pre-Melter 6 Coil Magazine Snipping Unit HL81 Chamfer / Straight Pre-Trimming Unit BF10 Profile Trimming Unit FK11 Grooving Unit SF21 for grooving and rebating top/bottom/lateral Profile Scraper PN10 Glue joint scraper Cleaning Agent Spraying Unit Buffers PowerControl PC23 Dcob E Aev Ak Swjy Tmog Homag Quality Kit EcoPlus Hand Operation for Run-in-mode Preinstallation for Boomerang TFU140 Sub Assembly small parts Foil and High Gloss Package CE Marking

Condition: used, Number of spindles 4 St. Working width 260 mm Working height 160 mm Length of the planing table 2000 mm Feed speed 6-12 m/min. total power requirement 28 kw Dimensions (L/W/H) 3.300 x 1.600 x 1.700 mm Dust suction hood 1 x 250 mm Weinig Cube four-side planer ----- Machine is cleaned and checked. Technical data ----- Working width 20 - 260 mm Working height 8 - 160 mm (with tool flight circle 125 mm) Spindles ----- WEINIG Easylock with precision reversible knives in HSS for quick and convenient knife changing. You have never changed a knife so quickly. Customer benefits: - no adjustment necessary - short downtimes - no adjustment errors - easy to use Dceb E Ajwhf Ivoy Tmeg Motor strengths: 1st spindle bottom: 7.5 kW 2nd spindle left + 3rd spindle right common motor 11.0 kW 4th spindle bottom: 7.5 kW Feed system ----- Frequency-controlled feed, infinitely variable 6 - 12 m/min Durofer pointed tooth rollers with depth limiter and self-cleaning Pneumatic pressure for feed rollers, including water separator Cycle-controlled dressing to support manual dressing. The feed roller is released after the second feed roller has gripped the workpiece. After leaving the second feed roller, the feed roller is brought into the starting position for the next workpiece. Machine electrical system ----- Operating voltage 400 volts (voltage range 380 - 420 volts), 50 hertz Electrical design according to DIN VDE 01 13, electrical equipment of industrial machines EN60204, IEC- 204-1. Other electrical regulations are not taken into account. Before operating frequency-controlled devices and systems, the customer must install an all-current-sensitive residual current device in accordance with DIN/ VDW 0100-482 in operating facilities at risk of fire Control of the extraction system via the machine software Machine stands, tables and stops ----- Planting table 2.0 m long (including jointing tine) One sliding roller in the outfeed table Automatic lubricant supply for removing resin from the table, including 5 liters of lubricant. - controlled by incoming and outgoing wood - lubricant quantity dependent on the set planing width - controlled by running meters traveled - improved transport of individual parts - reduction in contamination from resinous wood - extremely easy to use One sliding roller in the outfeed table MPV - MoulderPreView ----- Optical projection of the finished dimensions onto the raw part before processing. - Dimensional control before planing - Consideration of deflection and curvature when setting - Quick correction of the planing and joining Customer benefits: - Assessment of the workpieces before processing - Higher product quality - Visual inspection Machine operation ----- The clear software was specially developed for the CUBE. Thanks to the intuitive operation, training is not necessary. What can the CUBE software do: - Lightning-fast setting of the workpiece dimensions - Motorized setting of the planing and joining - Clear layout, large symbols - Memo function The last 10 dimensions are saved and can be repeated if necessary. - stepless adjustment of the feed rate - ...

Condition: new, with compressed air cleaning and frequency inverter Start-up with frequency converter, Pressure transmitter for demand-based control Integrated pre-separator, Integrated automatic extinguishing system - High suction capacity - little space required - 100 % air recirculation without temperature loss (residual dust < 0.1 mg/m³) - Integrated pre-separator and expandable control unit Dcjb E Aou R S E Ejy Tmeg - Optimum filter cleaning - Minimal noise level - Optional: patented fill level monitoring Maintenance-friendly, certified automatic fire extinguishing system - Dust bulkhead for dust-free container change (optional: safety interlocking of the containers) - Freely configurable module replacement and expansion options ----- Technical data ----- Extraction nozzle Ø: 355 mm, Nominal volume flow: 7,127 m³/h, max. volume flow: 10,000 m³/h, max. negative pressure: 3,347 Pa, Filter area: 73 m², Chip collection volume: 3 x 250 liters, Number of bags: 3 pieces, Motor 400 V: 15.0 kW, Dimensions (LxWxH): 3,320 x 1,058 x 2,361 mm, Sound pressure level: 73 dB(A), Weight: 1,064 kg, according to: GS - HO - 07 - new exhibition machine -

Condition: used, No. 04400 Roller conveyor trolley / loading station Ruchser RU-RWSF / RU-VL Used Dcsb E Aevdwa Rey Tmjg Consisting of 2 units: - Roller conveyor trolley Ruchser RU-RWSF 30/7 With wide roller conveyor approx. 500 mm Height from roller conveyor approx. 1600 mm, length approx. 3000 mm Can be moved on rails (rails not included in scope of delivery) Transport dimensions approx. 3000 x 850 x 1900 mm, weight approx. 200 kg - Loading station Ruchser RU-VL 1600 For loading order picking trolleys Can be moved on rails (rails not included in scope of delivery) The loading device moves under the order picking trolley and pneumatically lifts the window so that it protrudes slightly and can be rolled away Transport dimensions approx. 1650 x 1200 x 400, weight approx. 100 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical data, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse or location

Year of construction: 1991, Condition: used, machine/vehicle number: 1194, Year of manufacture: 1991 Machine number: 1194 Track, m: 2,6 Crane type: ASX II (year of construction 2002) Reach: 13,0 m Lifting capacity without grab: 1.250 kg / 13,0 m Grab: included Crane arrangement: in front of the cabin cabin side: left saw: 1,3 m alpha sawdust container: included Dcjb E Ajgykrloy Tmog measurement: dividing aid sale incl. 95 dm track system and polter from Baljer & Zembrod

Condition: good (used), Year of construction: 1997, Functionality: fully functional, Bürkle Multifoiler, membrane press Dsb E Ay Tsv T R Srjmocg Model BTF 1628/60 Year of manufacture 1997 System for coating smooth and shaped MDV parts with thermoplastic films from a roll or as cut-to-size, for PVC, PP, high-gloss PVC, ABS film. Suitable for the thermoforming or membrane process. Max. part size 1250x 2550 mm/ Part thickness 6-35 mm Heating plate dimensions 1600 x 2800 mm Max. heating temperature 140° Stroke 230 mm Control Siemens Total connection 38 Kw with 2 aluminum tables and reserve table Weight 16.5 t Press length: 2,550 mm Press width: 1,250 mm Max. workpiece thickness: 35 mm

Condition: used, knife: planer blade Z4 Dceber A Icaj E Ay Tmeg flight circle (ø): 125 mm drilling: 40 mm length: 60 mm

Condition: used, Working width 3450 mm Dcjb E Ayewhf Iio Tmjg Working height 2000 mm Number of cylinders 5 St. loading dimensions L x W x H 4100 x 2650 x 1050 mm Hess "Multipress" Perforated Plate Press For all sloped, segmental, and round-arch windows and doors. Also for interior work or frame construction. For gluing staircase block joints and much more. Largest working area approx. 3450 x 2000 mm External dimensions approx. 4100 x 2600 x 1050 mm The vertical perforated plate press is constructed of heavy-duty, torsion-free steel. Thanks to its simple, robust, and economical design, it has a long service life. The perforated plate is made of 10 mm sheet steel with a 50 mm hole pattern. The pressure cylinders and abutments are self-locking. 5 plug-in hand hydraulic cylinders on a perforated plate with a built-in pump, 2000 kp pressure relief valve, 140 mm pressure plate width, 80 mm pressure plate depth, 60 mm cylinder stroke 4 fixed individual abutments (Technical specifications according to the manufacturer - no guarantee!)

Condition: excellent (used), Edge banding machine LANGE B90KFE -used- touch screen, manual pressure bridge adjustment, Feed by means of transport chain, Extendable workpiece support, diamond milling cutter in synchronous and counter-rotation, bottom-mounted glue pot, Changing device for glue tray, PUR adhesives can be used, Glue tray with run-out / cleaning function, Pressure unit with driven roller, cross-cut saw with HF motor, Flush / radius trimming unit, Milling tools with carbide inserts, Corner copying unit with carbide interchangeable inserts, Radius scraper, Chip box for radius scraper, surface scraper, Spraying device for release agent, Spraying device for cleaning agents, buffing unit, traveling device, infrared lamp ----- Technical data ----- Edge thickness of rolls: 0.4-3 mm, Edge thickness of strips: 5 mm, Workpiece thickness: 8 - 60 mm, Feed speed: 10 / 8 m/min, Support plate Ø for edging material: 790 mm, Extraction nozzle Ø jointing trimming unit: 2x100 mm, Extraction nozzle Ø cross-cut saw: 100 mm, Extraction nozzle Ø trimming unit: 2x100 mm, Extraction nozzle Ø scraper unit: 120 mm, Compressed air connection: 6 bar, Dcsb E Ay Tju R Ta Demsg Total length: 4400 mm, Dimensions (LxWxH): 4400 x1150x1980 mm, weight: 990 kg Quality info: - all settings checked - adjusted according to manufacturer's specifications - Complete basic inspection - Complete basic cleaning - electrics checked - Pneumatics checked - ready for immediate use

Condition: used, Year of construction: 1994, No. 04470 Dcsb E Ay Tewhc Awomsg Electro-hydraulic veneer press Joos HP 90 Used, year of construction 1994 Press area 2550 x 1350 LW Gold anodized heating plates, electrically heated Total pressing pressure 90 tons Opening width 400 mm 4 press cylinders each 90 mm diameter Specific pressing pressure with full load 2.75 kg/cm2 Specific pressing pressure with 2 m2 load 4.58 kg/cm2 Operating pressure 355 bar Thickness of the heating plates approx. 51 mm Connected load per plate 9.1 kW Operation with rotary switch Push-button control for opening / closing / stop 2 safety ripcords (all-round) Automatic activation (overrun) of the press cylinders when pressure is released The “Goldeloxal-Decor D.B.G.M.” system makes the surface of the valuable heating plates extremely hard. This results in no scoring, reduced consumption of release agents, shorter working time, no film wear and higher quality veneer work. At the heart of the hydraulic quality press is the hydraulic unit, securely installed in the center of the lower part of the press. This design prevents damage to the motor, pump and other units. The motor, valves and two-stage high-pressure pump are maintenance-free at Joos. With the dynamic piston bearing, the pistons are not bolted to the pressure table but instead rest dynamically on a planed support surface under the pressure table. The table is prevented from tilting and moving by a column guide. A precision rack and pinion parallel guide ensures the synchronization of the printing table. Transport dimensions approx. 2950 x 1560 x 2160 mm LWH Weight approx. 3600 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as viewed” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse or location

Condition: used, Year of construction: 2011, Tenoning spindle 1 Stk Number of milling agregates 5 St. Spindle diameter 50 mm Control Weinig, PC-Nexus # 2784 Weinig Unicontrol 6 with NC spindles Machine will be cleaned and completely checked before delivery ----- Technical data summary (please inquire about additional accessories included) Item 1: Cross-cut saw ----- > Number of tools: 1 pc. > Spindle speed: 3,000 - 6,000 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3 kW > Adjustment range: radially pneumatically controlled to 8 positions, e.g., for edge rounding from above > Laser alignment light for detecting the sawn section Item 2: Rounding unit, horizontal, bottom ----- > Position: horizontal, bottom > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length: 25 mm mm > Spindle speed: 9,000 rpm > Maximum tool travel: 130 mm > Axial adjustment range mechanically coupled to cross-cut saw > Radial adjustment range pneumatically controlled on/off Length stop NC-controlled ----- > Length 3,500 mm > Electronic length stop Item 3: Tenon and slotting spindle ----- > Number of tools: variable, continuously adjustable, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, continuously adjustable, NC- controlled > Spindle speed: 3,500 rpm > Maximum tool travel: 320 mm > Spindle diameter: 50 mm > Maximum tool diameter: 320 mm > Motor power: 11 kW Item 4: 1st Profiling Spindle (Cylinder and Counter-rotation) ----- > Position: vertical right > Number of tools: 1 > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Maximum tool travel radius: 232 mm > Motor power: 11 kW Item 5: 2nd Profiling Spindle ----- > Position: vertical right > Number of tools: variable, continuously adjustable, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, continuously adjustable, NC- controlled > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Maximum tool travel radius: 232 mm > Motor power: 11 kW 2 feed rollers axially pneumatically controlled opposite the spindle, 2 positions Rung guide consisting of: Djb Eowamqve Ay Tmjcg Guide ruler in the stop (concurrent spindle area), Rung support bar from above in the area of ??the profile milling unit vertically on the right, and profiling spindle. Item 6: Profile milling unit, horizontal, top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.8 kW > Speed: 9,000 rpm > Max. tool travel: 130 mm > Axial adjustment range: 30 mm, 8 positions > Radial adjustment range: 125 mm, 8 positions Item 7: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range: 115 mm, 8 positions > Radial adjustment range: 110 mm, 8-position turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool travel: 210 mm > Motor power: 3.8 kW Item 8: Profile milling unit/grooving unit from below ----- > Motor power: 3.8 kW > Tool clamping length: 125 mm > Axial adjustment ra...

Condition: excellent (used), Panel saw ELCON 215 Advance -used- automatic clamps for trimming the underside, welded frame with extremely high rigidity, pneumatically deflecting sliding grid, stable locking of the saw carriage at the top and bottom, Dcjb E Asu R Tbney Tmeg retractable riving knife for cut-outs, Control panel at eye level, Digital display on the rip fence, Digital display for horizontal cut ----- Technical data ----- Cutting length: 5,300 mm, Cutting height: 2,150 mm, Trimming height: 2,070 mm, Cutting depth: 80 mm, Saw blade Ø: 300 mm, Motor: 3 kW, Extraction nozzle Ø: 160 mm, Compressed air: 6 bar, space requirement (LxDxH): 6,700x2,800x3,100 mm Quality info: - Complete basic inspection - Complete basic cleaning - electrics checked - ready for immediate use

Condition: used, Year of construction: 2009, table length: 2,600 mm, power: 7.5 kW (10.20 HP), table width: 920 mm, No. 04469 Spindle moulder / swivel spindle milling machine Casolin F 45 KL EVO Used, year of construction 2009 Very heavy version with full equipment Control unit EVO EL 2 with programming functions The body of the machine consists of one part Spindle swivels +/- 45.5° on both sides 4-axis control EVO Spindle diameter 30 mm Effective height of the spindle 140 mm Maximum tool diameter for profile milling 250 mm Maximum tool diameter for tenoning 300 mm Motor power 7.5 kW Direction of rotation right/left Speeds 3000 / 4500 / 6000 / 8000 / 10000 rpm Table with extensions 2600 x 920 mm LW Including 3-roller feed unit Maggi 2 suction connections each 120 mm diameter Transport dimensions approx. 2600 x 1500 x 2000 mm LWH Weight approx. 1350 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as viewed” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse or location Dob E Aewhck Usy Tmjcg

Condition: used, cutting width max. 310 mm Cutting height max. 125 mm Saw blade diameter 500 mm Motor output 5,5 kW SALVAMAC LEGEND 500 – The semi-automatic under-table cross-cut saw ----- ----- Maximum cutting area: 220x125/ 260x100/ 285x80/ 310x50 mm. When sawing stacked boards h max. 100 mm. The structure is made entirely of thick-walled and reinforced throughout painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cutting control in ergonomic position. Engine power of the saw motor 5.5 kW. Adjustable cutting speed via a pneumatic controller. Maximum system for weight balance and longevity. Shock absorbing system. Independent pneumatic adjustment options to adapt to different Types of processing. Durable and easily replaceable saw blade adjustment bar. HM circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece clamping press with electro-pneumatic control. Presser movement system using innovative ball bearings with double dust protection and automatic lubrication system. CE-compliant electrical system. The CE models must come with it as standard At least 1 meter long support plates/roller tables must be provided at the inlet and outlet. Technical data: ----- Saw cross section max. mm. 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: HM Z=108 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 5 Nl Intake port: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: V 400/50 Hz, 3 phase Worktop height: 900 mm +- 20 mm Color: Ral 7035 Machine additionally equipped with: ----- 2 m infeed table (right of the saw) with unpowered rollers: Dcob E Ayev Uq Tlo Tmjg Painted steel frame with galvanized wheels. load capacity 230 kg, Diameter 60 mm, distance 250 mm, width 320 mm. The space between the roles is enclosed in painted steel. Including lateral guidance. 2 m outfeed table (left of the saw) with unpowered rollers: Painted steel frame with galvanized wheels. Load capacity 230 kg, diameter 60 mm, distance 250 mm, width 320 mm. The space between the rollers is of enclosed in painted steel. Includes side guide, stop guide and millimeter scale. 2 pieces of strong pneumatic stops with a width of 200 mm ----- Total price ex works: on request! ----- Image and video not original, show identical model Further options such as longer inlet/outlet, stop systems on request! (technical data according to the manufacturer without guarantee!)

Condition: excellent (used), Edge banding machine FORMAT 4 Tempora 60.06 glueBox - used Touchscreen, pivoting control panel, program memory, automatic pressure bridge adjustment, feed via conveyor chain, extendable workpiece support, diamond jointing cutter for up- and down-feed, glue pot located underneath, glue pot changing device, use of PUR adhesives possible, GLUEBOX, printing unit with driven roller, cross-cut saw with 2 HF motors, pneumatically pivoting cross-cut saw, flush/radius trimming unit, motorized positioning control of the trimming unit, x-motion PLUS, corner rounding unit with diamond-coated cutter, radius scraper, radius scraper with motorized positioning, surface scraper, Dob E Ay Tou R S Nwomjcg operation-controlled Surface scraper, Inlet barrier, Release agent spray device, Lubricant spray device, Cleaning agent spray device, Year of manufacture 2022 ----- Technical specifications ----- Edge thickness for rolls: 0.4 - 3 mm, Edge thickness for strips: 3 - 6 mm, Workpiece thickness: 8 - 60 mm, Min. workpiece length: 140 mm, Feed speed: 10 m/min., Screen diagonal: 15 inches, Dimensions of jointing cutter: D 80 x 64 mm, Joining cutter power: 1.1 kW, Crosscut saw power: 0.35 kW, Milling station power: 0.75 kW, Extraction nozzle Ø: 80 + 160 mm, Compressed air connection: 7 - 10 bar, Total length: 4,872 mm, Dimensions (LxWxH): 4,872 x 1,511 x 1,468 mm, Weight: 1,500 kg Quality information: - All settings checked - Adjusted according to manufacturer's specifications - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Ready for immediate use

Condition: used, Number of spindles 4 St. Number of tools 11 St. Spindle diameter 50,40 mm Spindle length 285,125 mm length 4000 mm width 2000 mm height 2200 mm Djb E Ay Tevnv Uuemscg Weinig Univar 10/3 folding machine ----- For milling around windows, doors and the like with uneven circumferential profiles. Machine suitable for wood thickness 68 to 92 mm Time required per frame milling, medium size 1.20 x 1.20 m - approx. 2 minutes. The available tool positions are selected using a selector switch on the control panel retrieved. Machine with 3 hydraulically controlled right precision Lifting spindles for holding 3 tool sets, 2 x 95 mm spindle stroke per spindle The spindle stroke takes place in a U-movement, so that the opening is possible for short parts The milling stop remains as small as possible. Spindle stroke horizontally fine Adjustable for both tool positions from the operator side. Central lubrication for the spindle units. The 1. Spindle can be selected in right-left rotation. This spindle dips the last 100 mm of each frame end appropriate synchronization tool into the passing wood. Through this This prevents the tool of the subsequent milling spindle from running in the opposite direction working, causing tearouts. Excavation of the first 7 transport rollers using Footswitch. This shortens the lead time. An additional The support rail also allows large-format frames to be milled around. Continuous, chainless rubber roller feed with extreme short roller spacing. Height adjustment of the feed bar electrically readable. Electrical version according to VDE. Machine including operating tools, but without processing tools tools. Technical data: Working width min. 40 mm Working height min. 30 mm, max. 100 mm 1. Profiling spindle (synchronous and counter-rotation) ----- -- Motor strength lifting spindle 11.0 kW Spindle speed 6000 rpm Spindle diameter 50 mm Clamping length 285 mm Tool zero flight circle 112 - 140 mm Max. tool - D : 232 mm Spindle stroke vertical 2 x 95 mm for 3 tools Basic position under table 10 mm (adjustable up to 20 mm) Spindle stroke horizontal 80 mm with synchronous automatic immersion 2. Profiling spindle ----- Motor strength lifting spindle 11.0 kW Spindle speed 6000 rpm Spindle diameter 50 mm Clamping length 285 mm Tool zero flight circle 112 - 140 mm Max. tool - D : 232 mm Spindle stroke vertical 2 x 95 mm for 3 tools Basic position under table 10 mm (adjustable up to 20 mm) Spindle stroke horizontal 80 mm 3. Profiling spindle ----- Motor strength lifting spindle 11.0 kW Spindle speed 6000 rpm Spindle diameter 50 mm Clamping length 285 mm Tool zero flight circle 112 - 140 mm Max. tool - D : 232 mm Spindle stroke vertical 2 x 95 mm for 3 tools Basic position under table 10 mm (adjustable up to 20 mm) Spindle stroke horizontal 80 mm 4. Profile spindle - fitting unit on the right ----- For milling the fitting groove in the milling cycle or for grooving in the longitudinal profile. Pneumatic horizontal movement with Selector switch in the control panel. Motor 2.2 KW Speed 6,000 rpm Spindle diameter 40 mm Clamping height 125 mm, 2 tools Tool flight circle min. 140 mm, max. 180 mm Motor power feed 1.1 kW Feed speed 6 - 12 m/min. ...

Condition: excellent (used), Machining center HOLZHER Dynestic 7521 -used- Nesting table, pusher with suction device, unloading unit with conveyor belt, hardened, dust-protected prismatic guides, 2-sided guided portal design, helical rack and pinion drive (X- and Y-axis), Network card for remote maintenance, Control cabinet cooling with heat exchanger, manual control unit, Swivel saw unit, Plate tool changer on the move, incl. step mats, laser, Automatic central lubrication, New industrial PC, incl. nesting software with free-form boxes ----- Technical data ----- Processing length X: 4,600 mm, Processing length Y: 2,100 mm, max. traversing speed X: 80 m/min, max. traversing speed Y: 100 m/min, max. traversing speed Z: 25 m/min, Machine control software: CAMPUS HOPS, Motor power main spindle: 7.5 kW, Main spindle speed: 1,000 to 24,000 rpm, Main spindle holder: HSK 63F, Spindle cooling: liquid, Motor power drilling unit: 3.0 kW, Mounting of drilling spindles: M10, fit 11 mm, Number of vertical drilling spindles: 18 pcs, No. horiz. Double drilling spindles in X-direction: 2 pcs, No. horiz. Double drilling spindles in Y-direction: 1 piece, Djb Eou R Tcrs Ay Tmocg Vacuum pump output: 500 m³/h, Suction connection Ø: 250 / 200 + 2x 80 mm, Compressed air connection: 6-8 bar, Compressed air requirement: 300 l/min. Quality info: - Complete basic cleaning - Electrics checked - Pneumatics checked - adjusted according to manufacturer's specifications - ready for immediate use

Condition: used, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 3 kW Feed speed 5-24 m/min. total power requirement 27 kw Dimensions (L/W/H) 3900 x 2200 x 2000 mm weight of the machine ca. 2500 kg Weinig four-side planer Profimat 23 window version with glazing bead removal, ATS control and program control ----- Machine will be checked ! Technical data summary (please inquire about any additional accessories included) ----- Generally ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 pieces. > Dressing table length: 2500 mm > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight, approx.: 2500 kg Spindle arrangement ----- > Spindle 1: bottom > Spindle 2: right, pneumatically clocked up-down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: Glass bead saw pneumatically up and down Spindle description ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: Glass bead saw 2.2 kW, 6000 rpm, 40 mm diameter Djb Eeu Su Huo Ay Tmecg Other features ----- > Glazing bead removal > ATS control, automatic 2-axis positioning for width and height (left and upper spindle) with program memory 99 programs > Machine operation: window package Joint control of the right spindle and the glazing bead removal via manual selector switch in the control panel > Spindles with mechanical digital display Option: used planer heads (technical data according to the manufacturer - no guarantee!)

Condition: new, HOLZ-HER 7405 EVOLUTION CONNECT machining center -Exhibition machine- Dceb E Aju Tid Hey Tmeg This offer is an equipment package. The following items and options are already included in the price: - Material support - Height-adjustable infeed roller conveyor - EVOLUTION diamond formatting cutter set - CAMPUS V8 EVOLUTION CAD/CAM software - Flat screen 21.5", 16:9 - Workpiece length measurement LASER - Milling unit 7830 - 7887 tool changer 6-position magazine pick-up - ECO vacuum system - Air conditioning unit for switch cabinet cooling - Tool changer 7874 - Angular gear 7869 - Adapter for Clamex milling cutters - Tool set - 4-axis CLAMEX - Tool holder HSK-F 63 - Drilling unit XL 7885, 19 spindles - Manual control unit - Tool set - EVOLUTION for XL drilling head 7885 - new exhibition machine -

Condition: used, saw-blade dia. 500 mm Cutting height 120 mm Dcsb E Ayewhf Ipe Tmog Motor output 5,5/7,5 kW working length 4100 mm

Condition: new, Bore diameter variabel mm Number of heads horizontal 3 St. Number of heads vertical 4 St. Dimensions (L/W/H) 6100x1500x2300 mm Weight 950 kg 1 NEW drilling and milling center Götzinger Power Drill 300 With the Götzinger PowerDrill you can, depending on the type and design: - Drill on the front and on the long side - Dowels of front doors, pegs, fighters - The drilling patterns are freely programmable - You can drill: handle slides and corner bearings, with quick-change multiple spindle - You can: Milling lock case, pusher and PZ as well as 3D belts and drill - The machine has a horizontal and a vertical milling unit - A simple control lets you create drilling and milling programs, save and call again Base frame in sturdy design, covered with sheet metal Table top 1800 x 200 mm Processing unit: X-axis - 500 mm working travel Y-axis - 0-120 mm Z-axis - 0-105 mm (above table) Horizontal aggregates: 1 horizontal drilling unit (dowel drilling unit left) ----- Drilling motor 220 V, 1.1 kW Collet holder ER 25 4,000 - 11,000 rpm adjustable 1 milling unit horizontal for lock case ----- Milling motor 2.2 kW Speed ??controllable 3,000 - 16,000 rpm Collet holder ER 25 1 horizontal drilling unit (dowel drilling unit right) ----- Drilling motor 1100 W, infinitely variable 4,000 - 11,000 rpm, with collet holder ER 25 Vertical aggregates: 1 drilling unit vertical ----- Drilling motor 1100 W, infinitely variable 4,000 - 11,000 rpm, with collet holder ER 25 1 boring unit vertical - with quick-change boring head ----- Drilling motor 1,1 KW, 3,000 rpm Dsb E Ayoif Az Uo Tmscg Included: 1 boring head BKF 2/3, for corner bearing incl. Drill set, quick-change ----- On loose item, drill assembly to customer fitting 1 boring head BKF 3, for olive incl. Drill set, quick-change ----- On loose item, drill 1 cubo d = 25, 2 x dowel d = 10 1 milling unit vertical for lock case ----- Milling motor 2.2 kW Speed ??controllable 3,000 - 16,000 rpm Collet holder ER 25 1 piece length stop right and left, usable length 2.7 m, NC controlled Control: electro-pneumatic with three-axis NC positioning controller and integrated machine function Input via TFT display, 10 "color Machine complete, CE-compliant, with 1 set of drilling tools, DÜBO each 1 x d = 6,8,10,12 + 2 roughing cutters d = 16, ready for connection Loading dimensions: Machine L x W x H = 2.50 x 1.50 x 2.30 m, weight 850 kg Length stop L x W x H = 6.00 x 0.30 x 0.30 m, weight 100 kg ----- Total price in above mentioned version, ex works: on request Plus freight and installation / instruction (Technical information according to the manufacturer - without guarantee!)