Condition: used, machine/vehicle number: 14037, Rotor diameter: 260 mm Rotor width: 450 mm Rotor knives: 3 Stator knives: 2 Nkjdpfxoyi Idhs Agneu Infeed opening approx. 440x400 mm Drive motor: approx. 11 kW

Condition: refurbished (used), Year of construction: 2026, overall weight: 13,000 kg, Completely overhauled pre-shredder VZ 110. - Engine 110 kW - Screen D 40 mm - Fully refurbished with new rotor shaft, cutter bars, sprockets with triplex chain. - Gearbox inspected and newly fitted with bearings - Clutch inspected and newly fitted with bearings - Engine inspected and newly fitted with bearings - Machine repaint: old paint removed, primed, and new finish applied Repair of your defective machine or new fabrication possible Nkjdpfjyk Ea Ajx Agnju

Condition: used, Year of construction: 1994, operating hours: 21,900 h, functionality: fully functional, Baler Avermann, Type AVOS 1411 – 37/60, Pressing force 60 t, Year of manufacture 1994, good condition, with conveyor belt Technical Data: Manufacturer: Avermann Maschinenfabrik Type: AVOS 1411 – 37/60 Year of manufacture: 1994 Operating hours: 21,900 Pressing force: 60 t Nkedpfx Agoyhcybonju Drive power: 37 kW Filling opening: 1,400 x 1,100 mm Throughput rate (idle): 250 m³/h Bale dimensions: 1,100 x 700 mm (W x H), length variable Bale weight: 350-550 kg Binding: 4-fold vertical, automatic Conveyor belt length: approx. 9,000 mm Machine dimensions: approx. 6,000 x 1,700 x 3,730 mm (LxWxH) Machine weight: approx. 12,000 kg Note: The baler is still installed and can be inspected under power upon request. Dismantling and loading are not included in the scope of supply. Please note: All technical data are based on the manufacturer's information. We assume no liability for the specifications provided or for any potential errors. This offer is subject to change, prior sale excepted, and may be withdrawn at any time. Viewing is possible by prior arrangement. The sale is ex works, subject to advance payment, with no warranty or guarantee.

Condition: new, Year of construction: 2026, Screen drums – highest quality across Europe – compatible with all common screening machines We offer screen drums in top European quality, suitable for the following models: Doppstadt SM 314 / SM 414 / SM 518 / SM 618 / SM 620 / SM 720 / SM 725, Terra Select T4 – T7, Komptech Maxx, Mustang, Nemus, Cribus, Pronar, Terex, Neuenhauser, and many other types. Technical features & versions: Nsdoymflkspfx Agnsku Manufactured to your individual specifications Perforation: variable, round or square Arrangement: staggered or straight Minimal web widths for maximum screening performance Integrated spirals for optimal material conveyance Various material thicknesses available Sharp-edged perforated sheets made from high-grade special steel Your benefits: Top quality Europe-wide MORE THAN 70 screen drums available immediately from stock Delivery within Germany (EU-wide on request) Short delivery times and fair prices Contact us for your individual quote!

Condition: reconditioned (used), We manufacture the original. We offer a used, workshop-reconditioned granulator GA75 / 9 for sale. - Motor power: 75 kW, new motor - 9 rows of rotor knives, 4 stator knives - new rotor with completely new bearings and new, hardened wear parts. Inquiries from business customers only! Nodpfx Ash S U Rysgnsku

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: 511001M, nominal power: 160 kW (217.54 HP), Complete and fully functional Lindemann ZB 120 x 100 - 160kW Schorch drive - Voith fluid coupling - Feed steel slat conveyor - Cyrus extraction vibrator - Axle puller - Hydraulic unit - Spare grates - Hammers Nodpoyizcqjfx Agnsku - Various wear parts

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1989, operating hours: 30,000 h, working width: 1,050 mm, overall weight: 2,500 kg, total height: 1,350 mm, total length: 2,550 mm, total width: 1,900 mm, power: 18.5 kW (25.15 HP), torque: 10,000 Nm, input voltage: 400 V, blade width: 40 mm, control cabinet height: 1,200 mm, control cabinet length: 300 mm, control cabinet width: 800 mm, ejection height: 500 mm, filling opening length: 1,050 mm, filling opening width: 1,200 mm, hopper volume: 2 l, number of blades: 27, rotational speed (max.): 120 rpm, rotational speed (min.): 120 rpm, rotor diameter: 235 mm, rotor flight circle: 235 mm, rotor length: 1,050 mm, rotor width: 235 mm, sieve perforation: 25 mm, type of input current: three-phase, warranty duration: 6 months, year of last overhaul: 2025, machine/vehicle number: 10791/89, Equipment: CE marking, Intake length: 1200 mm intake width & rotor length: 1050 mm ᴓ rotor: 235 mm nº de cutters: 27 un (40x40 mm) rotor speed: 120 rpm Motor: 18,5 kW Voltage: 400 V Frequency: 50 Hz ᴓ screen: 30 mm - other sizes available Machine weight: 2500 kg Nkodexrzzqspfx Agnju Machine fully revised; including all wear parts new Scope of supply includes: - Infeed funnel - Steel support - Electric control pannel - Wiring between shredder and electrical cabinet

Condition: new, Year of construction: 2025, functionality: fully functional, CONSTMACH SW series mobile sand washing and screening plants deliver maximum performance in the field with high efficiency and flexible usage capabilities. Used for washing, screening, and classifying natural sand and gravel, these plants can be easily positioned even in confined spaces thanks to their compact design. Having all equipment assembled on a single mobile chassis significantly reduces setup time and makes transportation extremely practical. These plants, which can be quickly moved from site to site, provide businesses with significant savings in both time and money. SW-1240 Production Capacity: 60 t/h Screen Dimensions: 1,200 x 4,000 mm Helical Washer Dimensions: 400 x 4,000 mm Feed Height: 4,600 mm Total Motor Power: 37 kW Electric Generator Requirement: 75 kVA Weight: 20,000 kg Transport Dimensions: 15(L) x 2.8(W) x 4.2(H) m SW-1640 Production Capacity: 80 t/h Screen Dimensions: 1,600 x 4,000 mm Helical Washer Dimensions: 500 x 5,000 mm Feed Height: 4,650 mm Total Motor Power: 41 kW Electric Generator Requirement: 85 kVA Weight: 24,000 kg Njdpfx Ajxqgy Negnjku Transport Dimensions: 15.5(L) x 3.25(W) x 4.3(H) m SW-1850 Production Capacity: 150 t/h Screen Dimensions: 1,800 x 5,000 mm Helical Washer Dimensions: 600 x 6,000 mm Feed Height: 4,700 mm Total Motor Power: 50 kW Electric Generator Requirement: 100 kVA Weight: 32,000 kg Transport Dimensions: 16(L) x 3.65(W) x 4.4(H) m SW-2060 Production Capacity: 200 t/h Screen Dimensions: 2,000 x 6,000 mm Helical Washer Dimensions: 700 x 7,000 mm Feed Height: 4,750 mm Total Motor Power: 55 kW Electric Generator Requirement: 120 kVA Weight: 37,000 kg Transport Dimensions: 17(L) x 3.85(W) x 4.5(H) m Why Choose CONSTMACH Mobile Sand Washing and Screening Plant? CONSTMACH combines quality, durability, and user-friendly design in its mobile sand washing and screening plants. Manufactured to European standards, our machines exceed industry expectations with their high washing capacity and low maintenance costs. Every plant we produce, backed by years of engineering experience, aims to ensure uninterrupted efficiency in our customers' production processes. Offering portability, quick installation, and high performance, these plants give you maximum flexibility at every stage of your projects. Choose the CONSTMACH brand for quality production, technical support, and reliable service. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, Year of construction: 2025, functionality: fully functional, color: other, CONSTMACH dewatering screens and hydrocyclone systems are specially designed for producers seeking high efficiency and quality in fine material washing processes. These systems deliver superior performance in washing materials up to 7 mm in size. Their most significant advantage is their ability to retain even the finest particles, down to 90 microns, within the material. This ensures high-quality standards, particularly in applications where preserving micronized material is critical, such as in construction sand production. Material loss encountered in classic washing systems with helical or bucket designs is minimized thanks to CONSTMACH technology. Additionally, the system offers easy maintenance, durable polyurethane screen surfaces, and the advantage of easy storage of the dry final product. These features both reduce operating costs and ensure production continuity. Dehydration Screen and Hydrocyclone Technical Specifications MODEL: CDS-1225 Dehydration Screen Dimensions (mm): 1,200 x 2,500 Hydrocyclone Diameter: 20" Slurry Pump Motor Power (kW): 37 Vibrator Motor Power (kW): 2 x 4.5 Production Capacity (tons/hour): 60 - 80 MODEL: CDS-1635 Dehydration Screen Dimensions (mm): 1,600 x 3,500 Hydrocyclone Diameter: 26” Slurry Pump Motor Power (kW): 55 Vibrator Motor Power (kW): 2 x 7.5 Production Capacity (tons/hour): 100 - 150 MODEL: CDS-2040 Dewatering Screen Dimensions (mm): 2,000 x 4,000 Hydrocyclone Diameter: 2 x 26” Slurry Pump Motor Power (kW): 75 Vibrator Motor Power (kW): 2 x 11 Production Capacity (tons/hour): 150 - 200 Why Choose Constmach Dewatering Screens? Choosing CONSTMACH dewatering screens and hydrocyclones means not only high performance but also reliability. Superior engineering design, energy efficiency, and low maintenance requirements ensure your facility runs smoothly for years to come. CONSTMACH develops customized solutions for its customers' production needs, offering both quality and durability. Therefore, if you are aiming for an efficient washing and dewatering process, the CONSTMACH brand is the right choice for you. What Do We Do at Constmach? Nkedpfx Agexqan Teneu Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products tailored to their needs. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance. Information: The prices listed in the advertisement are shared based on current information. However, due to changes in market conditions and supply processes, our prices may vary from time to time. Therefore, we recommend requesting a quote from us for accurate pricing information.

Condition: excellent (used), Year of construction: 2004, operating hours: 9,067 h, functionality: fully functional, overall weight: 19,000 kg, power: 315 kW (428.28 HP), Doppstadt AK 430 Profi Shredder/Chipper/Remote/Magnet • Manufacturer: Doppstadt • Model: AK 430 Profi • Year of manufacture: 2004 • Operating hours: 9,067 • Engine: 6-cylinder Mercedes engine • Power: 315 kW / 430 HP Nkodpfxox El Dfj Agnou • Magnetic drum • Radio remote control • Hydraulic self-propulsion • Hydraulic rear conveyor • Hydraulic support wheels • Loading length: 2.94 m • Loading height: 2.18 m • Discharge height: 2.80 m • Conveyor belt length: 3.80 m • Number of hammers: 36 pcs • Features: Rear discharge belt • Discharge belt as new • Road approval with a maximum speed of 80 km/h • Total weight: 19,000 kg • Immediately ready for operation • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typographical mistakes excepted. - Sale in accordance with our general terms and conditions.

Condition: excellent (used), Year of construction: 1988, operating hours: 3,100 h, functionality: fully functional, overall weight: 8,960 kg, Willibald MZA 2500/Shredder/Chipper • Manufacturer: Willibald • Model: MZA 2500 • Year of manufacture: 1988 • Operating hours: 3,100 hrs • Engine: V6 Mercedes-Benz • Throughput: 75 m³/h depending on material • Feed opening: 500 mm • Swinging hammers • Suitable for shredding organic material for composting (garden waste, pruned wood up to a diameter of 30 cm) Nsdpoxu Dipofx Agnoku • Capable of reducing waste wood and used timber up to a diameter of 30 cm • Number of axles: 2 tandem/dual axles • Brake system: Air brakes • Towing eye: 40 mm • Total weight: 8,960 kg • German machine • Immediately operational • This offer is non-binding and subject to prior sale. - Subject to intermediate sale. - Errors and/or typographical mistakes excepted. - Sale according to our general terms and conditions.

Condition: used, machine/vehicle number: 14019, Rotor diameter: 800 mm Rotor width: 600 mm Rotor knives: 6x16 Stator knives: Feed opening approx. 580x400 mm Nksdpfx Aoyiguvegnju Drive motor: 75 kW

Condition: ready for operation (used), Screening machine Binder 19/70-1 Brand: Binder Surface: 7000 x 1900 mm – 1 Deck Screen Opening: [] 20 mm Nkedpfjw Uqhgsx Agnsu Driving: E-motor 22 kW Incl.: rubber springs.

Condition: ready for operation (used), Vibrating Chute Cyrus Brand: Cyrus Length 6000 mm – width 1200 mm Njdpfx Agov Rty Honsku with two pieces vibration motors of each 7,5 kW Incl.: springs

Condition: ready for operation (used), Steinert Electro Magnetic Conveyor Belt Brand: Steinert Length frame A-A = 2000 mm Beltwidth: 1100 mm Driving: 2 kW gearbox Dim. Block : 1150 x 1000 x 600mm On stock: 1 piece. Njdpjxwftzofx Agnjku

Condition: ready for operation (used), Goudsmit Electro Magnetic Conveyor Belt Brand: Goudsmit 2 pieces on stock: *Dim. belt conveyor: A-A = 2500 mm Beltwidth: 1300 mm Dim. block : 1600 x 1200 x 500 mm Nkjdpfox Hcphjx Agnju Driving: gearbox 3 kW Including rectifier. *Dim. belt conveyor: A-A = 3000 mm Beltwidth: 1400 mm Dim. block : 2300 x 1300 x 500 mm Driving: gearbox 4 kW Including rectifier.

Condition: ready for operation (used), Eddy Current Separator Nsdpex Numwefx Agnsku Brand : Bakker Magnetics *Magnetdrum : length 1750 X 320mm Driving: 11 kW E-motor. *Belt conveyor: A-A  length 3400 mm Belt width: 1600 mm Driving: 3 kW Gearbox.

Condition: ready for operation (used), Screening machine Främbs Freudenberg 14/50-2 Brand: Främbs Freudenberg On Stock 2 pieces: *Surface: 5000 x 1400 mm – 2 decks Nodpfeyiv Stex Agnjku *Surface: 5000 x 1600 mm – 2 decks Incl.: E-motor and springs.

Condition: ready for operation (used), WOKO Electro Magnetic Conveyor Belt Brand: WOKO Length frame A-A = 2600 mm Beltwidth: 1400 mm Driving: 4 kW e-motor. Dim. block : 2100 x 1400 x 430 mm Nedpfxoxdvw Ds Agnjku Including rectifier.

Condition: ready for operation (used), Screening machine Haver Böcker 15/40-2 Nedpfx Ajx Stthjgnsku Brand: Haver Böcker Dim. screen: 4000 x 1500 mm – 2 decks Incl.: E-motor and springs.

Condition: used, Year of construction: 1993, output 18,5 kw number of blades 28 Weight 1300 kg Njdpsyk H Tqjfx Agnsku

Year of construction: 2013, condition: used, We offer you a used PET bottle crusher of the manufacturer BOREMA, type R-1200 F, year of construction 2013, for residual emptying, deaeration and pre-compaction of the fed PET bottles, from 0.3 up to 2.5 l content. The machine has a chassis and can be moved into and out of the feed chute of your baler. The machine has a throughput capacity of approx. 85,000 bottles/h, corresponding to approx. 3t/h. We have the following technical information: Manufacturer: BOREMA Umwelttecjhnik AG Type: R-1200 F (with trolley for retracting and extending) Year of manufacture: 2013 Drive power: 11 kW Connected load: 15 kW Rated current: 32 A Back-up fuse: 40 A Type of construction: Continuous system Function: Double rotor press system Rotor pretension pneumatic: approx. 16t Overload protection: by anti-blocking system Input material: PET disposable and returnable empty bottles 0.3 to 2.5 L capacity Input material: HDPE bottles and canisters up to 3 l capacity Throughput capacity: approx. 3 t/hour, corresponding to approx. 85,000 bottles/hour, depending on size Required compressed air output: G1/2", 8 bar, 40 l/min. Compression ratio: 1:3 Flange dimensions inside: 972 x 1220 mm Feed opening: 565 x 1280mm Weight: approx. 2500kg Possible applications: Due to the chassis, the PET flattener can be moved into the feed chute of your baler as required, thus ensuring residual emptying, venting and pre-compaction of the fed bottles and canisters. When the material is changed, the PET flattener is simply moved out of the feed chute again and paper, cardboard, film, etc. can now be pressed further without using the flattener. Process of the BOREMA PET crusher: The plastic packages are drawn in by two rotating shafts. One of the rotating shafts is pneumatically pretensioned by two air bellows and presses the PET bottles with 16 t of pressure against the second rotating shaft. In the process, the closed plastic bottle is squeezed together, caused to burst and vented. Residual liquids run out and the material falls into the baler in a precompressed state. When impurities are introduced, the pneumatically pre-tensioned shaft deflects to the side and the impurities are channeled through. Significant advantages compared to conventional PET perforators with punching mandrels or knives: The BOREMA process is much more efficient and less subject to wear than conventional PET perforators with punching mandrels or knives. The biggest advantage is that any foreign matter such as metal parts, stones, bottles with frozen contents and pieces of wood are passed through the pneumatically deflecting rotor shaft without stopping the operation of the system or causing any major damage. With conventional perforators, mandrels or blades sometimes break off or become so jammed with the interfering material that the plant has to be shut down and repaired at great expense. Comments: The crusher is in good condition, was dismantled from the running operation, stored, is available at short notice and after assembly immediately ready for use. The documentation (manual, CE, electrical/hydraulic circuit diagram) is complete. An inspection is possible by arrangement. The technical information is taken from sales brochures, the operating instructions or other information provided by the manufacturer. We accept no liability for incomplete or incorrect data and informations. Nkedsu Thpnepfx Agnsu

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, power: 9.7 kW (13.19 HP), Technical data cardboard shredder: Manufacturer Presto GmbH & Co. KG Type PZA Year of construction 2007 Throughput volume 130 m³/hour Nsdpju Tha Iofx Agnsku Speed 37/9 rpm Motor power 7,5 / 2,2 kW Electrical connection 32 A Dimensions shredder inside 1,490 x 1,320 x 530 mm (L x W x H) Dimensions shredder outside without cover 2,308 x 1,320 x 685 mm (l x w x h) Machine weight 0,45 tons Use of the systems: The PZA cardboard shredder was in use in a Dutch logistics centre to pre-shred loose, erected cardboard boxes from the returns department and then press them into bales. The cartons were fed manually onto the infeed conveyor and transported directly to the cardboard shredder by a sliding belt conveyor and shredded. The pre-shredded cardboard boxes were then transported over hundreds of metres to the baler where they were pressed. Scope of delivery: 1 piece Presto cardboard shredder (2-shaft shredder) type PZA Comments: The cardboard shredder was an elementary part of the disposal line and therefore good maintained to ensure high availability of the returns department. The machine is in good condition and ready for immediate use. The price is per piece exw. our warehouse in Siddeburen, the Netherlands. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Nkjdeu Tg I Dspfx Agnou Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Condition: excellent (used), Year of construction: 2004, operating hours: 34,480 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 750 kg, overall weight: 19,000 kg, transport height: 3,300 mm, oil tank capacity: 750 l, power: 45 kW (61.18 HP), Technical data baler: Manufacturer Bollegraaf Typ HBK 100 Year of construction 2004 Hours of operation 34,480 hours Press power main press 100 tons Press power of pre-press max. 42 tons Feed channel 1,600 x 1,100 mm Filling volume 3.15 m³ Theoretic cycle time 22 sec. Theoretic throughput capacity up to 450 m³/hour Nkedpfxoxbgnhe Agnou Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical, fully automatic Throughput rate at a bulk weight of 30 kg/cbm approx. 13 tons/hour bulk weight of 50 kg/cbm approx. 20 tons/hour bulk weight of 100 kg/cbm approx. 30 tons/hour Throughput rate with ruffler approx. 20 tons/hour Bale weight 550 up to 750 kg, depends on material Volume hydraulic oil tank 750 l SPS controller Telemecanique TSX Micro Transport dimensions only baler 10,900 x 2,320 x 3,300 mm (l x w x h) Machine weight baler approx. 19 tons Comments: Unlike the standard HBC press series from Bollegraaf, this machine does not have a pre-press flap but cuts the material between blades on the press ram and the counter blade in the frame. This makes it a cutting edge press, similar to a Paal, unoTech, etc. The press is in very good condition for its age, as it was used exclusively for compressing paper from document destruction. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.