Condition: good (used), Year of construction: 2016, functionality: fully functional, Vertical baler HSM V-Press 1160 plus, year of manufacture 2016 Technical Data: Manufacturer: HSM Model: V-Press 1160 plus Year of manufacture: 2016 Pressing force: 55 t Ijdpfjx Irw Rjx Ag Ujtb Drive power: 4 kW Idle cycle time: 25 s Filling height: 1115 mm Feed opening: 1195 x 650 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Dimensions: 1700 x 1800 x 2200 mm (W x D x H) Weight: 2430 kg Materials: Paper, cardboard, film The baler is in good condition. Operator's manual and CE declaration are available. Inspection can be arranged at any time, including under power. Upon request, we can also carry out test runs with your material for a handling fee. We are happy to answer your questions about the machine by phone from Monday to Thursday from 08:00 to 14:00. On Fridays we are available from 08:00 to 13:00. Please note: All technical data are based on the manufacturer's information. We do not assume liability for the given data or possible errors. Offer is subject to change, prior sale reserved, and may be revoked at any time. Inspections are possible by prior arrangement. Sale is ex works, prepayment required, without warranty or guarantee.

Condition: refurbished (used), Year of construction: 2019, operating hours: 3,000 h, functionality: fully functional, pressing force: 70 t, overall weight: 9,500 kg, filling opening width: 420 mm, filling opening length: 1,250 mm, Technical data packing press / can press / metal sheet press: Manufacturer unoTech GmbH Type UPAXX 70 Year of manufacture 2019 Operating hours approx. 3,000 hours Pressing force 700 kN at 315 bar Filling opening chute 420 x 1,250 mm (d x w) Channel cross-section (package dimension) 350 x 500 mm (h x w), length depending on material Drive power 30 kW Connected load 40 kW Power consumption, total 70 A Throughput capacity for empty beverage cans with: one pressing stroke approx. 1.7 t/hour two pressing strokes approx. 2.5 t/hour Achieved compaction approx. 1200 kg/m³ Hydraulic oil tank capacity 850 l Press dimensions built up 8,000 x 1,600 x 2,500 mm (l x w x h) Transport weight press approx. 9.5 t Accessories: Iodpfx Agsu Th S Sj Ujtb Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355 Material properties: According to the manufacturer, this machine is suitable for pressing tin cans, metal sheet offcuts, sheet steel as well as aliminium, brass and copper waste. Condition of the baler: The can press was completely overhauled in our workshop. The press is in a very good condition, see the functional video after the overhaul and is sold with the 12 months OBM parts warranty. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Itsdpfxex Dnb Uo Ag Usb Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see our video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: ready for operation (used), Year of construction: 2010, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2010 Pressing force: 532 kN Voltage: 400 V Maximum bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Itodeyap I Ajpfx Ag Ujb Machine dimensions: 180 x 157 x 298.5 cm Filling opening dimensions: 19.5 x 65 x 111.5 cm Condition: very good! Functionality checked. FLITS Rental & Sales service: with every machine we include a bundle of baling wire (120 wires). Do you require additional bundles of baling wire? Please request a complimentary quote. At FLITS Rental & Sales, you choose speed, transparency, and reliability. We think along with you, respond immediately, and ensure you quickly receive the right machine. You are very welcome to view the machines at our premises. We are located at Schoterlandseweg 94, 8413NE Oudehorne. Visits are by appointment, so we can take the time to advise you thoroughly and present the most suitable machines. We are happy to assist you! Waste baler Paper baler Cardboard baler Plastic baler Waste compactor Recycling Textile baler Waste processing

Condition: good (used), Year of construction: 2003, functionality: fully functional, Baler Presto CC 13 V, Year of manufacture: 2003 Technical data: Manufacturer: Presto Model: CC 13 V Year of manufacture: 2003 Pressing force: 13 t Cycle time: 24 s Drive power: 4 kW Feed opening: 780 x 750 mm Feed volume: 0.39 m³ Tying: 3-fold, automatic Throughput capacity for bulk density of: 35 kg/m³ - 1.7 t 60 kg/m³ - 2.5 t 100 kg/m³ - 3.8 t Bale dimensions: 700 x 750 mm Bale weight: up to 250 kg Dimensions: 2800 x 1050 x 1830 mm (LxWxH) Machine weight: approx. 1900 kg Materials: paper, cardboard, film Iedpjx Uz Dtefx Ag Ustb Note: The baler is in good condition and has been function-tested. You can find a video on our website or YouTube channel. Inspections, including under power, can be arranged at any time by appointment. Upon request, we can also perform tests with your material for a handling fee. We are happy to answer any questions about the machine by phone from Monday to Thursday between 08:00 and 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical data is based on the manufacturer’s information. We accept no liability for the provided information or potential errors. The offer is non-binding, subject to prior sale, and can be revoked at any time. Viewings are available by appointment. Sale is ex works, prepayment only, without warranty or guarantee.

Condition: good (used), Year of construction: 2015, operating hours: 1,932 h, functionality: fully functional, Baler Presto CC 50 M, semi-automatic, year of manufacture 2015, with lifting-tilting device Technical Data: Manufacturer: Presto Model: CC 50 M Year of manufacture: 2015 Operating hours: 1932 Pressing force: 50 t Cycle time: 52 s Drive power: 7.5 kW Filling opening: 1030 x 1100 mm Filling volume: 0.85 m³ Binding: 3-fold, wire, manual Throughput capacity at bulk weight: - 35 kg/m³: 1.3 t - 60 kg/m³: 1.7 t - 100 kg/m³: 2.2 t Bale dimensions: 750 x 1100 mm Bale weight: 300 kg Ijdpsx Uz Daofx Ag Uetb Dimensions: 4705 x 1680 x 2540 mm (LxWxH) Machine weight: approx. 4000 kg Materials: Paper, cardboard, film The operating manual is available in German. Note: The machine is in good condition. It has been inspected and tested by us in 28816 Stuhr. You can find a video on our website or YouTube channel. Viewings, including under power, are possible by appointment at any time. On request, we can also carry out tests with your material for an additional fee. If you have any questions about the machine, we will be happy to assist you by phone from Monday to Thursday from 08:00 to 14:00. On Fridays from 08:00 to 13:00. Please note: All technical data is based on manufacturer specifications. We assume no liability for the information provided or any possible errors. This offer is non-binding, subject to prior sale, and can be revoked at any time. Viewings are possible by appointment. Sale is ex works against prepayment, without warranty or guarantee.

Condition: good (used), Year of construction: 2014, operating hours: 7,145 h, functionality: fully functional, Baler Presto HPK 50 HS, Year of Manufacture 2014 Manufacturer: Presto Model: HPK 50 HS Year of Manufacture: 2014 Drive: 30 kW Pressing Force: 50 t Operating Hours: 7145 Filling Opening: 1600 x 650 mm (L x W) Channel Cross Section: 700 x 950 mm Maximum Filling Volume: 1.06 m³ Cycle Time: 20 s Tying: 4-fold Throughput Capacity at 35 kg/m³: 5.5 t/h 60 kg/m³: 8.8 t/h 100 kg/m³: 12.7 t/h Bale Weight: up to 500 kg Machine Dimensions: 8420 x 1900 x 2400 mm (L x W x H) Machine Weight: approx. 10,500 kg Materials: Paper, Cardboard, Film, PET Bottles Remarks: Blades and counter-blades as well as all sliding plastics have been replaced. The baler is in good condition and has been inspected and tested. A video is available on our website or YouTube channel. Operating manuals and CE declaration are available. Inspections, including under power, are possible by appointment at any time. Upon request, we also conduct tests with your material for a handling fee. We are happy to answer any questions about the machine by phone from Monday to Thursday from 08:00 to 14:00. On Fridays, we are available from 08:00 to 13:00. Ijdpfsx Uzzxsx Ag Ujtb Please note: All technical data is based on manufacturer’s specifications. We assume no liability for the information provided or for any potential errors. The offer is non-binding and subject to prior sale and revocation at any time. Viewings are possible by arrangement. Sale is ex works against advance payment, without warranty or guarantee.

Condition: good (used), Year of construction: 2016, Avermann Baling Press, Model AVOS 1410 BR5 – 45/80, Pressing Force 80 t, Year of Manufacture 2016 Technical Data: Manufacturer: Avermann Maschinenfabrik Model: AVOS 1410 BR5 – 45/80 Year of Manufacture: 2016 Pressing Force: 80 t Drive Power: 45 kW Feed Opening: 1,400 x 1,000 mm Throughput at 35 kg/m³: 6.0 t/h Throughput at 60 kg/m³: 10.5 t/h Throughput at 100 kg/m³: 17.5 t/h Bale Dimensions: 1,100 x 750 mm (W x H), length variable Bale Weight: up to 600 kg, depending on material Tying: 5-fold vertical, automatic Machine Dimensions: approx. 10,850 x 2,400 x 3,800 mm (LxWxH) Machine Weight: approx. 18,000 kg Remarks: The baler is still in operation and can be inspected upon request. It is expected to be available from the end of February 2026. A matching WESTERIA conveyor belt is optionally available. The main cylinder was replaced in November 2025. Additional photos available on request. Please feel free to contact us. Please note: Itjdex Uzy Uopfx Ag Usb All technical data are based on information provided by the manufacturer. We assume no liability for the accuracy of these details or for any errors. This offer is subject to change, prior sale, and withdrawal at any time. Inspections are possible by appointment. Sale is ex works, against advance payment, without warranty or guarantee.

Condition: good (used), Year of construction: 2019, operating hours: 1,022 h, functionality: fully functional, Baler Presto CC 20 M, year of manufacture 2019, pressing force 20 t, with retention device. Technical data: Manufacturer: Presto Model: CC 20 M Year of manufacture: 2019 Operating hours: 1022 Pressing force: 20 t Cycle time: 24 s Drive power: 7.5 kW Filling opening: 1030 x 750 mm Filling volume: 0.53 m³ Tying: 3-fold, manual Throughput capacity at bulk density of 35 kg/m³ - 1.6 t 60 kg/m³ - 2.3 t 100 kg/m³ - 2.8 t Bale dimensions: 700 x 750 mm Bale weight: up to 300 kg Dimensions: 3300 x 1235 x 1860 mm (LxWxH) Machine weight: approx. 2500 kg Materials: paper, cardboard, film Itedpox Uzynefx Ag Ueb Note: The machine is in good condition. It has been inspected and tested at our facility in 28816 Stuhr. You can find a video on our website or YouTube channel. Inspections, including under power, are possible at any time by appointment. Upon request, we can also conduct tests with your material for a service fee. We are happy to answer any questions about the machine by phone from Monday to Thursday, 08:00 to 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical data is based on information provided by the manufacturer. We accept no liability for the information given or for any potential errors. Offers are subject to change, prior sale reserved, and may be revoked at any time. Inspections are possible by appointment. The sale is ex location, without warranty or guarantee.

Condition: good (used), Year of construction: 2017, operating hours: 1,640 h, functionality: fully functional, Baler Presto CC 40 M Technical specifications: Manufacturer: Presto Model: CC 40 M Year of manufacture: 2017 Pressing force: 40 t Cycle time: 34 s Itsdpfx Agsx Uzxko Ueb Drive power: 15 kW Feed opening: 1080 x 1100 mm Feed volume: 0.85 m³ Tying: 4-fold, polyester strapping, manual Throughput at bulk density of 35 kg/m³ – 1.8 t/h 60 kg/m³ – 2.5 t/h 100 kg/m³ – 3.1 t/h Bale dimensions: 750 x 1100 mm Bale weight: 400 kg Dimensions: 3650 x 1590 x 2010 mm (LxWxH) Machine weight: approx. 3800 kg Materials: Paper, cardboard, film The baler is in good condition. It has been inspected and tested by us. A video is available on our website or YouTube channel. The operating manual and CE declaration are available. Note: Channel exit is fully automatic and self-regulating. Inspections, including powered demonstrations, are possible at any time by prior arrangement. Upon request, we can also perform tests with your material for a nominal fee. If you have any questions about the machine, we are happy to assist you by phone from Monday to Thursday between 08:00 and 14:00, and Friday from 08:00 to 13:00. Please note: All technical data are based on manufacturer information. We do not assume any liability for the supplied information or possible errors. This offer is subject to change, prior sale excepted, and may be withdrawn at any time. Inspections are available by appointment. Sale is ex works, advance payment required, without warranty or guarantee.

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a Itjdpfx Aox A U Ncsg Ujb bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test.

Condition: reconditioned (used), Year of construction: 2014, operating hours: 5,612 h, functionality: fully functional, pressing force: 48 t, filling opening width: 1,020 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 550 kg, total height: 2,800 mm, overall weight: 12,000 kg, transport height: 2,800 mm, oil tank capacity: 300 l, power: 30 kW (40.79 HP), volume flow: 332 m³/h, Technical information baler: Manufacturer HSM GmbH + Co. KG Typ VK 4812 Year of construction 2014 Hours of operation 5,612 hours, stand August 2025 Press power main press 48 tons Specific press capacity 58,2 N/cm² Feed channel 1,250 x 1,020 mm Theoretic cycle time 11.2 sec. Theoretic throughput rate 332 m³/hour Bale size 1,100 x 750 x 600 up to 1,200 mm Driving motor 30 kW Connected load 32 kW Rated current 59 A Tying system 4-fold horizontal, fully automatic Throughput rate at a bulk weight of 20 kg/cbm up to 6 tons/hour bulk weight of 50 kg/cbm up to 13 tons/hour Bale weight up to 550 kg, depends on material SPS controller Siemens SIMATIC S7-200 Operating panel Siemens HMI Touch Panel Filling quantity hydraulic oil tank 300 L Oil type HVI 46 Machine installation dimensions with bale chute 10,046 x 4,387 x 2,705 mm (l x w x h) Transport dimensions baler 8,500 x 2,500 x 2,750 mm (l x w x h) Machine weight press approx. 12 t Scope of delivery: Baler HSM VK 4812, without hydraulic oil, without conveyor system. Two wire reel boxes for 8 pieces 40 kg wire reels, without wire Bale chute Machine documentation in German Itjdpfx Agevtpq Ho Ueb Comments: The press is equipped with an oil cooler and potential-free contacts for external control. The control cabinet is operated from the left in the direction of pressing, the needle unit is located on the right-hand side and can be folded back for transport. The press was partially overhauled and tested in our workshop, see photos and our function video. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagrams) is available in German. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: excellent (used), Year of construction: 2017, operating hours: 13,284 h, functionality: fully functional, pressing force: 140 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,500 kg, oil tank capacity: 2,600 l, Technical data baler: Manufacturer Bollegraaf Type HBC 140 Year of construction 2017 Working hours 13,284, as of October 2025 Press power main press 140 tons (max. 153,5 tons) Press power of pre-press 70 tons Feed channel 1,600 x 1,100 mm (l x w) Capacity per cycle time 4,34 cbm Theoretic cycle time 16 sec. Bale size 1,100 x 1,100 mm (w x h), length adjustable Driving motor 2 x 75 kW Connected load 209 kW Tying system 5-fold vertical, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx. 30 tons/h bulk weight of 50 kg/cbm approx. 46 tons/h bulk weight of 100 kg/cbm approx. 82 tons/h Bale weight 850 up to 1.500 kg Hydraulicoil 2.600 l Univis N46 Baler dimensions with conveyor built up with hopper approx.13,200 x 24,200 x 7,333 mm (l x w x h) Transport dimensions only baler approx.13,200 x 2,884 x 3,539 mm (l x w x h) Machine weight baler approx. 51,810 tons Technical data feeding and elevating conveyor with gooseneck: Manufacturer Bollegraaf Typ HBT 1216/1800 * 23,300 30°/15° Year of construction 2017 Driving motor 7,5 kW Length feeding conveyor 6,750 mm Length elevating conveyor 14,400 mm Length goose neck 2,150 mm Grade 30° Effecting width 1,754 mm Height of side wall feeding conv. 500 mm Height of side wall elevating conv. 800 mm Transport dimensions feeding conveyor with one segment elevating part 9,816 x 2,500 x 2,242 mm (l x w x h) Transport dimensions elevating conveyor with goose neck 13,472 x 2,800 (without motor) x 2,729 mm (l x w x h) Pit dimensions 10,000 x 3,200 x 1,200 mm (l x w x d) Condition: The press is in very good condition and ready for immediate operation, see the function video for more information. The conveyor belt chain needs replacing. The system will be in operation until December 2025. Scope of delivery: baler with conveyor belt, maintenance platform, access ladder, two wire feed stations for 5 wire reels each (without wire), and bale slider. Itsdpjxpxhvjfx Ag Ueb Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 2000, operating hours: 28,155 h, functionality: fully functional, Bale Press Paal Konti 200 D, year of manufacture 2000, optional with matching conveyor belt Paal KEM-1400 Technical Specifications: Manufacturer: Paal Model: Paal Konti 200 D Year of manufacture: 2000 Operating hours: 28,155 Pressing force: 60 t Drive power: 45 kW Total connected load: 60 kW Feed opening: 1020 x 1400 mm Bale dimensions: 750 x 1100 mm, variable length Tying: 4-fold automatic Throughput capacity at: 35 kg/m³ approx. 9.5 t/h 60 kg/m³ approx. 16.5 t/h 100 kg/m³ approx. 26 t/h Bale weight: 450 to 650 kg Transport dimensions: approx. 10,123 x 2,152 x 2,720 mm (LxWxH) Machine weight: approx. 15,000 kg Materials: Paper, cardboard, film Itodpfxex Tflfj Ag Uob The press is in good condition and has been inspected and tested. A video is available on our website or YouTube channel. Full documentation available. Please note: All technical data are based on information from the manufacturer. We assume no liability for the information provided or for any possible errors. The offer is non-binding, subject to prior sale, and may be revoked at any time. Inspections are possible by appointment. Sale is ex works, against advance payment, without warranty or guarantee.

Condition: good (used), Year of construction: 2019, Conveyor system, AMI, approx. 69m driven, plus 10m non-driven – used – : Ex-site price: only €13,500 (net), dismantled, packed and loaded! Manufacturer: AMI Type: Roller Conveyor ARF50-130 Year of manufacture: 2019 Length Itsdpfjx Tttqsx Ag Uob Section 1: approx. 33m, driven Section 2: approx. 36m, driven Usable width: 450mm (roller width) Element width: 62.5mm 2 flap elements / passages Including control system Plus approx. 10m non-driven roller track Condition: good Available: immediately Location: Warehouse Frankenberg / Saxony

Condition: ready for operation (used), Year of construction: 2012, Brand: DIXI Model: 60 Sh Year of manufacture: 2012 Pressing force: 60 tons Voltage: 400V Maximum bale weight: 340-500 kg Bale dimensions: approx. 120 x 80 x 80-110 cm Machine weight: 2,400 kg Machine dimensions: 190 cm wide x 140 cm deep x 230 cm high Filling opening dimensions: 115 cm x 80 cm deep x 55 cm high Condition: Very good! Functionality checked. FLITS Rental & Sales service: With every machine, we supply a bundle of binding wire (120 wires). Need more bundles of binding wire? Request a quote with no obligation. FLITS Rental & Sales is your reliable partner for the sale and rental of high-quality machines for both businesses and private individuals. We focus on delivering efficient solutions in the areas of internal transportation, cleaning, waste processing, and working at height. At FLITS Rental & Sales, you will find a wide range of machines suitable for deployment in various sectors. See our advertisements for: waste balers for efficient waste management, electric pallet trucks/stackers for fast and safe internal transport, scrubbers for thorough and professional floor cleaning, forklifts in various designs suitable for different working environments. With FLITS Rental & Sales, you choose speed, clarity, and reliability. We think along with you, respond immediately, and ensure that you quickly have the right machine at your disposal. Visit our location You are very welcome to view the machines at our premises. We are located at: Schoterlandseweg 94, 8413NE Oudehorne, Netherlands. Ijdpfx Agjx Ux Hxj Ujtb Visits are possible by appointment, so we can take the time to inform you thoroughly and show you the right machines. Contact Do you have questions or would you like to receive a no-obligation quote? Please feel free to contact us: We are happy to help you further. Waste baler Paper baler Cardboard baler Plastic baler Waste compactor Recycling Textile baler Waste Waste processing DIXI

Condition: ready for operation (used), Year of construction: 2008, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2008 Pressing force: 532 kN Voltage: 400 V Maximum bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening dimensions: 19.5 x 65 x 111.5 cm Condition: very good! Functionality thoroughly tested. FLITS Rental & Sales service: with every machine, we supply a bundle of binding wire (120 wires). Do you need additional bundles of binding wire? Request a non-binding quote. At FLITS Rental & Sales, you can count on speed, transparency, and reliability. We think along with you, respond promptly, and ensure you have the right machine quickly. You are very welcome to view the machines at our location. We are located at Schoterlandseweg 94, 8413NE Oudehorne. Visits are possible by appointment, allowing us to provide comprehensive information and show you the right machines. Itjdpfox Tznvjx Ag Usb We are happy to assist you! Waste baler Paper baler Cardboard baler Plastic baler Waste compactor Recycling Textile press Waste Waste processing

Condition: good (used), Year of construction: 2006, Garbage compactor, garbage press, press container, garbage container, self-compacting compactor, waste press, paper press container, paper container, cabinet press, vertical baler -Manufacturer: Bramidan, cabinet press vertical baler -Type: 4-0 S50 KBP PES243768-2 -Drive power: 5.5 kW -Pressure: 50 t Iodpfx Ajxnb Nyjg Uotb -Filling opening: W x H 1350 x 760 mm -Bale ejection device: bale dimensions 1200x800x1100 mm -Transport dimensions: 1400/2040/H2880 mm (press can be laid down for transport) -Weight: 2750 kg

Condition: good (used), Year of construction: 2001, Garbage compactor, garbage press, press container, garbage container, self-compacting compactor, waste press, paper press container, paper container, cabinet press, vertical baler -Manufacturer: Husmann, cabinet press vertical baler Isdpjxg Dp Tsfx Ag Ujtb -Type: KBP 20 -Drive power: 3 kW -Pressure: 20 t -Filling opening: W x H 1250 x 680 mm -Bale ejection device: bale dimensions 1200x950x850 mm -Transport dimensions: 1450/1160/H2980 mm -Weight: 1300 kg

Condition: good (used), Waste compactor, waste compactor, compactor container, waste container, self-compacting container, waste compactor, paper compactor container, paper container, cabinet compactor, vertical baler -Manufacturer: DIXI, Cabinet baler, vertical baler -Type: 15 S -Drive power: 4 kW -Pressure pressure: t -Interior dimensions 1100x690x1370 mm Itsdpfoxwuilox Ag Usb -Transport dimensions: 1540/950/H1970 mm -Weight: 834 kg

Condition: good (used), Year of construction: 1992, Roller compactor, packing station, garbage compactor, garbage press, press container, garbage container, self-compactor, waste compactor, paper compactor, paper container, cabinet press, vertical baler, cardboard reducer, paper baler, rotating waste compactor Itodpfx Aexrpi Aeg Uob -Manufacturer: Bergmann, paper baling press -Type: PS 8100-38 -Waste compactor: with rotating compaction unit -Advantage: It can be filled continuously -Drive power: 2.02 kW -Filling opening: 1190/990/H670 mm -Bale volume: 1 m³ -Transport dimensions: 1600/1200/H2200 mm -Weight: 898 kg

Condition: reconditioned (used), Year of construction: 2007, operating hours: 13,209 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,050 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 700 mm, bale weight: 500 kg, oil tank capacity: 400 l, year of last overhaul: 2025, volume flow: 108 m³/h, Technical data baler: Manufacturer according to type plate BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Type HC 50 (corresponds to the Presto HPK 50) Year of manufacture 2007 Operating hours 13,209 hours, as of March Number of bales pressed: 23,379 bales Pressing force 50 tonnes Specific pressing force 650 kN/m² Feed chute dimensions 1250 x 1050 mm (L x W) Filling volume 0.96 cm³ Theoretical cycle time 32 seconds Theoretical throughput capacity 108 m³/hour Bale dimensions 1100 x 700 mm (w x h) length variable Drive power 15 kW Power consumption, total in 50 A Tying 4-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3.1 t/hour Iedpfx Agsw U Dt Ne Ujtb Bulk weight of 60 kg/cbm approx. 4.5 tonnes/hour Bulk weight of 100 kg/cbm approx. 7.2 tonnes/hour Bale weights with a bale length of approx. 1.2 m up to 500 kg, depending on material Hydraulic oil tank capacity 400 litres PLC control Siemens S7-200 Effective transport dimensions excluding baler 6780 x 1800 x 2100 mm (l x w x h) Transport weight of press 8.5 tonnes Condition of the baler: The press was used in a production facility exclusively for pressing cardboard and was regularly serviced. With only 13,209 operating hours, the machine has seen little use. The press was partially overhauled in our workshop and then tested. The following overhaul work was carried out: Machine cleaned Bale retainer made operational and lubricated Light barrier replaced Twisting unit completely dismantled, broken down into individual parts, all bearings replaced, all plastic glides replaced, lubricated, chain tension adjusted Knife and counter knife dismantled, sharpened, reassembled Knife gap readjusted General maintenance work carried out and lubricated Scope of delivery: 1 baler with wire roll boxes, without wire 1 set of machine documentation Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2000, operating hours: 32,169 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,320 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 750 kg, overall weight: 22,000 kg, oil tank capacity: 900 l, For sale is a complete baling system consisting of conveyor technology, baling press (partially refurbished and tested) and wire stations. Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 60A Ijdpfx Aeviwdmeg Uetb Year of construction 2000 Hours of operation 32,169 hours, stand November 2024 Press power main press 60 tons Press power of pre-press max. 25 tons Feed channel 1,320 x 1,100 mm Theoretic cycle time 18 sec. Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical Throughput rate at a bulk weight of 30 kg/cbm approx. 5,5 tons/hour bulk weight of 50 kg/cbm approx. 10 tons/hour bulk weight of 100 kg/cbm approx. 16 tons/hour Bale weight 400 up to 750 kg, depends on material SPS controller Telemecanique TSX Micro Machine weight baler approx. 24 tons Scope of delivery: 1 piece chain belt conveyor 1 Bollegraaf HBC 60A baler with whirling unit 1 maintenance platform with access ladder 2 wire stations with deflection rollers for 10 wire reel stands (without wire) The following repair and overhaul work was carried out: Hydraulic oil tank emptied, cleaned and refilled with new oil Oil filter and air filter replaced Hydraulic block partially resealed Hydraulic hose on hydraulic block replaced Wire entry marks on the floor passages welded shut and smoothed Tying unit cleaned, serviced Electrical system repaired, door flap contact switch partially replaced Whirbulator repaired General maintenance work carried out, lubricated Machine tested during operation, without the use of materials, in manual mode and in automatic mode, see function video Comments: The system has already been completely dismantled, stored and is available for loading at short notice. The documentation (BA, CE, electrical/hydraulic circuit diagram) is available. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: ready for operation (used), Year of construction: 2013, Brand: HSM Model: V-press 860 plus Iedpfx Ajx S Excsg Uotb Year of manufacture: 2013 Pressing force: 418 kN Voltage: 400 V Max. bale weight: 430 kg (depending on material) Bale dimensions: 120 x 110 x 85 cm Machine weight: 2,083 kg Machine dimensions: 180 cm x 125 cm x 298.5 cm Filling opening dimensions: 120 cm x 65 cm x 85 cm Condition: Very good! Functionality checked. FLITS Rental & Sales Service: Each machine comes with a bundle of baling wire (120 wires). Need additional bundles of baling wire? Request a free quote. FLITS Rental & Sales is your reliable partner for the sale and rental of high-quality machinery for both businesses and private customers. We focus on providing efficient solutions for materials handling, cleaning, waste processing, and working at height. At FLITS Rental & Sales you will find a wide range of machines suitable for use in various sectors. Check our listings for: balers for efficient waste processing, electric pallet trucks/stackers for fast and safe materials handling, scrubber dryers for thorough and professional floor cleaning, forklifts in a variety of models suitable for different work environments. With FLITS Rental & Sales you choose speed, clarity, and reliability. We think along with you, respond immediately, and ensure you quickly receive the right machine. Do you have questions or would you like a free quote? Feel free to contact us. Waste baler, paper baler, cardboard baler, plastic baler, waste compactor, recycling, textile press, waste, waste processing

Condition: repair required (used), Year of construction: 2009, functionality: limited functionality, machine/vehicle number: 39906, We are offering our Husmann body for hooklift vehicles for sale, which we have used to start handling the disposal of front loader containers. Basically, we fully refurbished and repaired it two years ago. However, there is currently an issue with the flap sensors, so the body is in need of some repairs. This should not be a major repair. With this body, you can tip 1.1 cbm, 2.5 cbm, and 5.0 cbm front loader containers (depending on manufacturer and weight). Since we have now acquired a refuse collection vehicle, the body is up for sale. Itodpfx Agexz Thnj Uob