Primary shredder

MJ Recycling M&J PreShred 4000 S

Condition: refurbished (used), Year of construction: 2015, operating hours: 20,640 h, functionality: fully functional, overall weight: 24,500 kg, total width: 2,500 mm, Completely overhauled machine Single-shaft shredder, particularly suitable for secondary shredding and granulation of pre-shredded materials. Application: Commercial waste for thermal or material recycling, e.g., paper, cardboard, plastics and foams, rubber, leather, textiles, floor coverings, etc. Lindner Komet 2200 HP, overhauled in March 2026 Year of manufacture: 2015 Control cabinet with ABB frequency converter, dust-tight with recooler Control panel: complete Drive motors: ABB 2x200 kW Paintwork new / RAL: 5003/7001 Rotor bearings/pull-off sleeve/shaft seals: new Hydraulic unit: complete Total weight approx. 24.5 t Dwsdpfxeyu Undo Aa Isc Dimensions (LxWxH) mm: 5800 x 2500 x 3100 mm Inspection and trial run/test run possible by appointment. Delivery time: immediate

Condition: used, Used biodiesel plant made by Biodiesel Fuels Equipment Ltd UK in 2012 and shut down in 2021. Plant capacity is 10,000 litres/8 hour day up to 25,000 litres/day if run for 24hours. Dwodpfxjyhc Rgj Aa Ioc It has been used to process used sunflower and palm oil. Equipment includes: (3) separators, (2) reactors, (2) ionisers, (2) oil preparation vessels, (1) methanol preparation vessel, (1) tank for biodiesel.

Condition: new, Year of construction: 2025, The 3E Machinery tire recycling system is a state-of-the-art, modular industrial line engineered for the efficient processing of used passenger, truck, and industrial tires into clean fractions such as rubber granules, steel, and textile fibers. This installation provides high throughput, low energy consumption, and full compliance with environmental protection standards. Dwedpfjx Aidbox Aa Iec Comprehensive Tire Processing Technology • The system comprises several processing stages that guarantee complete material downsizing and separation: • Pre-cutting and primary shredding of whole tires • Multi-stage size reduction with dual-shaft and four-shaft shredders • Granulation and fine milling of rubber • Magnetic separation of steel • Air and cyclone separation of textile fibers • Final purification and classification of rubber granulate This process enables the production of high-quality rubber granules in various sizes (from 30 mm down to 1–4 mm), as well as clean steel suitable for recycling. System Throughput and Application Range • Throughput: from 500 kg/h to over 10,000 kg/h • Material types: passenger car tires, truck tires, industrial tires, solid tires, bead-reinforced tires • Final output products: o rubber granules (30 mm, 10 mm, 1–4 mm) o rubber powder o steel o textile fibers • Optional low-noise and low-dust engineering packages available The layout can be customized to match the client's required capacity and available plant space. Why partner with our company – Official European Representative of 3E Machinery • Competitive pricing without intermediary markups. We offer equipment directly from the factory in China, without additional distributor or agent margins, ensuring highly competitive pricing while maintaining full manufacturer quality. • Comprehensive technical and commercial support. Based on client specifications, we select the appropriate line configuration, define process parameters, capacity, and technology scope—ensuring a perfect match for each project. • Full assistance throughout the entire procurement cycle. We support customers from the initial inquiry, through technical discussions, payment terms, and to the conclusion of the final agreement with the manufacturer. • Logistics and transportation support. We assist with organizing international transport, customs clearance, and required documentation so delivery proceeds smoothly and without complications. • Extensive experience in the recycling industry. As a long-standing European representative of 3E Machinery, we provide practical know-how and market expertise that greatly simplifies the purchasing process.

Condition: used, Technical details: cutting thickness max.: 0,5 - 70 mm infeed - automatically: 40 mm control: CNC 2050 table-size: 2x L:1500 x B: 1700 x H: 720 mm burner heads: 2 Stück weight of the machine ca.: 6,7 t Autogenous flame cutting machine with table. With corresponding additional equipment, the following processes can be performed: Plasma cutting; Plasma signing; Marking; Graining; Boring. other specifications: 2x tables: -L:1500 x W: 1700 x H: 720mm, supporting surface L: 1500 x W: 1500mm; with suction connection Ø 320 x 60mm Dwjdpfxeu Nwfuo Aa Iec Distance control system: -Make ZAC 2100, type 7211-2-100 V02; -size 105 x 165 x 130mm -24 VDC; torch voltage 30 - 300V; protection class IP50 -ignition height 1 - 25mm in steps of 0,2mm -cutting height 1 - 12,5mm in steps of 0,25mm -Cutting height together 0 - 20mm in steps of 0,5mm Height drive: - Linear Drive model, type 2203; 24 VDC 100 - 190 watts; stroke 220mm. Laser generator: -manufacturer Kijellberg, type HiFocus 280i, welding rectifier -Power range 10A / 84V - 280A / 192V; protection voltage IP22; cooling type AF; with 2x cooling connection 1/2". Heat exchanger: -manufacturer Kijellberg, type KWE 360 -working voltage U1 400V / 2,5A; protection type IP22; coolant of Kijellberg mixture; with 2x cooling connection 1/2". *

Year of construction: 2023, condition: used, functionality: fully functional, THM Recycling Solutions Granulation System Plastics Shredder, Granulation and Washing System comprising THM Recycling Solutions granulation unit with: THM FR300/235/215-25-7500 inlet belt conveyor (2024) THM ZM 1000 granulator (2023) THM FR300/235/215-25-7500 outlet belt conveyor (2024) HAG HA-SNP-P-20-14-0-7.5 hydraulic unit,12 bar Dsdpfxjzhudws Aa Iewc Pierret guillotine cutting system with: Pierret G35RI guillotine cutting machine Pierret G28RI guillotine cutting machine 2x belt conveyors for infeed and outlet

Condition: used, Flat Pile Feeder Folding Machine Stahl KC 56/6-KTL for 16 pages Cross Fold and 6 buckles 2 knives with Side buckle Falzmaschine / Combination Folding Machine Stahl KC 56/6-KTL 16 Seiten Falzmaschine / 16 pages Cross Fold Year 1990 - Serial-No. 41655/90-169032 Arbeitsbreite max. 780mm / Working width max. 780mm Flachstapelanleger / Flat Pile Feeder 1. Station 6 Taschen / 1. Folding Unit 6 Buckles 2. Station 2 Schwerter mit Seitentasche / 2. Folding Unit 2 knives with Side Buckle Leimeinrichtung Planatol / Gluing unit Planatol Schuppenauslage / Stream delivery Stahl SAK Djdpfeyw Hg Sox Aa Iewc Inklusive Kompressor und Handbücher / Included Compressor and Manuals Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, year of last overhaul: 2023, punching force: 300 t, We offer a choice of two identical 2006 machines. 2006 IBERICA 105 SPEED Max sheet size : 750 x1050mm, Min Sheet size : 350 x 400mm, Max mechanical speed : 9000 sph, Max impression strength : 300 tons. Dodpfxeqzhr Dj Aa Ijwc Max Carton board : 1.5mm, Mini Paper : 90/ 100 gm2, Max Corrugated board : 3mm, Direct Pallet loading Non stop feeder, Full complement of infeed table furniture, Left hand side pull register lay with sensor, Touch screen, Double action stripping, Automatic Non stop delivery with belt and programmable counter, Centre line, Quicklock on chase and stripping, Micrometric thin plate system, Elevated, Complement of stripping equipment PRICE: £110,000 Ex works for either

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1604/1999, total width: 2,500 mm, total height: 2,660 mm, total length: 21,500 mm, compressed air connection: 6 bar, type of input current: three-phase, overall weight: 3,500 kg, working width: 2,000 mm, working height: 1,000 mm, power: 14 kW (19.03 HP), table width: 1,310 mm, table length: 4,500 mm, Cape CP110 1 and CP110 2 - automatic hydraulic pallet nailing machine designed for top-side and bottom-side nailing. Machine allows for 2-way and 4-way pallet production. Stacker and Outfeed included. Dsdpfx Aajy S Trwo Iowc No listed price - open to offers.

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 16951-3.3, input voltage: 400 V, overall weight: 22,000 kg, input frequency: 50 Hz, We offer this used Eldan Recycling HR162T-33 machine, model ELDAN HR 162T-33, manufactured in 1999. Year of manufacture: 1999 Power: 162 kW Weight: 22000 kg Serial number: 895153 Voltage: 3 x 400 V Frequency: 50 Hz For sale: an industrial ELDAN Granulator 160 (year of manufacture 1999), designed for shredding rubber in recycling processes. The machine comes from a complete tire or cable recycling line and is in very good technical condition. IT IS POSSIBLE TO PURCHASE THE COMPLETE LINE. The machine is sold complete with interchangeable screens of various sizes (min. approx. 8 and 10 mm), frame, drive, and accessories as shown in the pictures. The device is designed for industrial screening and material separation. Application: CABLE AND ALUMINUM RECYCLING, rubber granulation, tire recycling, rubber and aluminum granulate production, material preparation for further separation. Advantages: reputable manufacturer ELDAN Recycling, robust industrial design, suitable for continuous operation, high reliability, easy integration with existing technological lines. The granulator can be sold separately or as part of a complete tire recycling line, which is also available in our offer. Inspection is possible by prior arrangement. We provide assistance with loading. Additional photos, videos, and technical documentation are available upon request. Incoterms: EXW – Poland ELDAN GRANULATOR 160 – INDUSTRIAL RUBBER GRANULATOR ELDAN Granulator 160 (Year of manufacture: 1999) for sale. Industrial granulator designed for rubber size reduction and tire recycling applications. The machine comes from a complete tire recycling plant and is in very good technical condition. Applications: aluminum granulation Rubber granulation Tire recycling Rubber granulate production Dwedpezmvclsfx Aa Isc Material preparation for further separation Key Features: Manufactured by ELDAN Recycling Heavy-duty industrial construction Designed for continuous operation Reliable and easy to integrate into existing recycling systems The granulator can be sold separately or together with the complete tire recycling line, which is also available for sale. Inspection is possible by appointment. Loading assistance is available. Additional photos are available upon request. Incoterms: EXW – Poland

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, laser type: fiber laser, laser power: 40,000 W, travel distance X-axis: 3,500 mm, travel distance Y-axis: 28,000 mm, travel distance Z-axis: 850 mm, power: 12,000 kW (16,315.44 HP), overall weight: 5,000 kg, Equipment: cooling unit, X axis travel distance (mm): 3500mm Y axis travel distance (mm): 28000mm Z axis travel distance (mm): 850mm A axis travel distance (mm): ±90° C axis travel distance (mm): ±90° U axis travel distance (mm): 30mm Maximum speed: 40m/min Dsdpfx Aajvzyf Do Iowc Positioning accuracy: ±0.1mm Support steel types: H-beam, channel steel, I-beam, T-beam, angle steel Maximum size of steel section: 1000mm*400mm Maximum weight of steel: 5tons