Used Hazardous Waste Containers for sale (8,979)

Condition: as good as new (ex-display), The scope of delivery includes: 01x waste container, second choice Manufacturer: Weber Depth lid closed: 755 mm Depth lid open: 770 mm Height 1,320 mm Lid closed Total width: 1,350 mm Capacity: 360 kg Cgsdpsku Aw Njfx Afnsn Volume: 770 liters Further data / information: Material color of garbage can: black Lid material color: yellow Usable width: approx. 1,085 mm Usable depth: approx. 640 mm Usable height: approx. 1,000 mm Material: polyethylene (PE) Tires: 4 tires (2x braked) Tare weight: 68 kg Note: Effective width and effective depth are tapered towards the bottom. General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: good (used), Waste oil collection container Cgsdpfxob A Hfzo Afnsn -Container: Ø 660 x 1250 mm -Container: tiltable -Weight: 30 kg

Condition: used, Roll-off container with lid Skip container, bin container Year of manufacture: approx. 2000 Capacity: approx. 4 m³ Internal length: approx. 300 cm Internal width: approx. 160 cm Loading edge height: 80 cm Unladen weight: approx. 800 kg Permissible total weight: approx. 8,000 kg - Steel sheet lid, divided in two per side Cedpex N Ikvjfx Afnogn - Steel partition wall in the middle of the container - 4 lifting hooks for skip loader truck or crane transport - Tipping joint on both sides - Heavy-duty construction made from thick material Required space (L x W x H): 320 x 180 x 125 cm Good condition 3 units available Price per unit

Condition: good (used), Year of construction: 1973, Waste compactor, waste compactor, compactor container, waste container, self-compacting container, mobile waste compactor, paper compactor container, paper container -Stationary press for: interchangeable containers -Load chute: covered Cedob A Ii Sjpfx Afnegn -Pressing process: hydraulic -Pressing process: automatic -Emergency safety switch: at the deposit slot -Piston dimensions: 1450 x 650 mm -Piston stroke: 1100 mm -Transport dimensions: 2100 x 4500 mm -side threaded ratchets for skip containers -Functionally tested

Condition: good (used), Year of construction: 2001, functionality: fully functional, KAMPWERTH SHD 1600 horizontal baler, incl. 3 interchangeable containers 48000x2800x3000 Paper baler // Waste baler // Refuse baler Baler, 1 unit • Type: Kampwerth SHD 1600 • Year of manufacture: 2001 • Unladen weight: 3,500 kg • 15 kW • Dimensions: 5000x2300x3700 mm (disassembled for transport) Container box for baler, 3 units • Year of manufacture: 2001 • Volume: 28 m³ • Unladen weight: 3,100 kg • Filling weight: 12,000 kg • Dimensions: 7000x2400 mm Cjdpfx Afoxm Skrensgn Location: Bielefeld

Condition: reconditioned (used), Year of construction: 2011, functionality: fully functional, Wet waste press press container Bergmann MPB405 SN/10 for skip loader 10cbm usable volume tested, serviced, fully functional Painting in desired RAL color possible We would be happy to make you an offer including delivery. Cgodpoxql Dgsfx Afnon

Condition: reconditioned (used), Year of construction: 2013, functionality: fully functional, Wet waste press press container Bergmann MPB405 SN/10 for skip loader 10cbm usable volume tested, serviced, fully functional Painting in desired RAL color possible Cgedpfx Afjvmwpwjnjn We would be happy to make you an offer including delivery.

Condition: good (used), Hazardous Material Container Manufacturer: SÄBU Morsbach Model: SÄBU Safe Tank ST1000 Year of manufacture: External dimensions: 3,050 x 2,170 x 2,310 mm Internal dimensions: 2,920 x 2,000 x 2,000 mm Door: 1,800 x 1,850 mm Sump capacity: 1,070 l Cgedpoxdxgnjfx Afnon Approval: WG Classes 1-3 and flammable media Features: galvanized, with ventilation louvers Condition: good Weight: 0.75 t

Condition: excellent (used), Year of construction: 2002, total length: 6,060 mm, total width: 2,440 mm, total height: 2,600 mm, Trencor 20FT ISO Tank Container 25,000L UN PORTABLE, T11, bottom discharge steam heating design temperature: -40 to +130°C valid 2.5-year test until 09/2026 = Further Information = General Information Year of manufacture: Aug. 2002 Model year: 2002 Suitable for: Chemicals, construction water, fuel, wastewater Weights Tare weight: 3,695 kg Payload: 32,305 kg gross weight: 36,000 kg Functionality Load compartment volume: 24,690 l Body manufacturer: Van Hool 24,690L TC, 2 compartments (12,290L/12,400L), L4BN, IMO1, T11 Number of compartments: 2 Condition Technical condition: very good Visual condition: average Further information Please contact Arne Honingh for more information. Codpfex I Huqsx Afnegn

Condition: good (used), Conveyor belt for waste removal guillotine, three-knife, automatic die-cutter Production Germany Working width 52 cm, conveyor belt length approx. 300 cm. Cgjdewfq T Sspfx Afnjn Discharge of scrap from under the machine directly to the container.

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, The machine is designed for mixing various mixtures, whether solid or liquid, in large containers, with the designated space for the containers measuring 1200x1050x790 mm. Once the container is placed into the designated area, the machine begins to rotate, performing the mixing process. The mixing time can be electronically adjusted. Technical Data: Speed – variable, controlled by frequency converter 220V-380V / 3.7 kW Power consumption – 1500 W Supply voltage – 1x220V / 50Hz Motor protection – IP 54 Machine weight – 1000 kg Cgodpfx Afjw N I Uysnsn Container space dimensions – 1200x1050x790 mm Working chamber dimensions – 1870x1860 mm Total height – 1980 mm

Condition: new, Year of construction: 2026, functionality: fully functional, power: 55 kW (74.78 HP), ### Introduction to Jaw Crushers A jaw crusher is a type of primary crusher used in mining and ore processing plants. It works by using compressive force to break down large rocks into smaller, more manageable pieces. The machine consists of a fixed jaw and a movable jaw, which together create a V-shaped cavity called the crushing chamber. The movable jaw exerts force on the rock by forcing it against the stationary plate, causing it to break. Key Components: - Fixed Jaw Plate: Mounted in a fixed position. - Movable Jaw Plate: Mounted on a pitman that moves in a reciprocating motion. - Flywheel: Provides the necessary inertia for the crushing action. - Toggle Plates: Serve as a safety mechanism, ensuring that the jaw crusher operates efficiently and prevents damage. ### Working Principle The working principle of a jaw crusher is based on the reciprocating movement of the movable jaw against the fixed jaw: 1. Feeding: Large rocks are fed into the top of the crusher. 2. Crushing: As the movable jaw moves back and forth, it crushes the material against the fixed jaw. 3. Output: Crushed material is discharged from the bottom of the crushing chamber. ### Applications of Jaw Crushers Jaw crushers are versatile and can be used in a variety of industries and applications, including: 1. Mining and Mineral Processing: - Primary crushing of mined ore (gold, copper, iron, etc.). - Size reduction of rocks to facilitate further processing (e.g., milling). 2. Construction and Demolition: - Crushing of concrete, bricks, and other construction materials. - Recycling of building materials to create aggregate for new construction. 3. Aggregates Production: - Crushing of raw materials to produce aggregates for concrete and asphalt. - Production of road base and railway ballast. Codeq Nf Tvjpfx Afnsgn 4. Industrial Applications: - Crushing materials in chemical processing plants. - Size reduction of materials for production processes in various industries. 5. Environmental Management: - Processing of materials for landfill cover. - Recycling operations to reduce waste and promote sustainable practices. ### Advantages of Jaw Crushers - High Crushing Ratio: Capable of producing a range of material sizes with a single pass. - Durability and Reliability: Built to withstand heavy-duty use and harsh conditions. - Simple Structure: Easy to maintain and repair, with fewer components compared to other types of crushers. - Versatility: Suitable for various types of materials and a wide range of applications. - Energy Efficiency: Efficiently uses energy, making it cost-effective for operations. ### Examples of Use Cases - Mining Operations: Jaw crushers are used as primary crushers in mine sites to crush large rocks before being processed further in the milling process. - Construction Sites: Used to break down concrete and other building materials for recycling and re-use. - Aggregate Production: Integral in producing the base materials for construction and infrastructure projects. - Demolition Projects: Efficiently crushes and recycles materials from demolished structures. By understanding the introduction and applications of jaw crushers, businesses can make informed decisions about integrating this machinery into their operations for efficient and effective material processing.

Condition: new, functionality: fully functional, Year of construction: 2025, A sand aggregate or gravel production plant is a facility where raw materials like sand, gravel, and other aggregates are processed to create various products used in construction and other industries. These facilities typically involve a series of processes to transform raw materials into the final products. Here is a general overview of the key components and processes involved in a sand aggregate or gravel production plant: 1. Mining and Extraction: - The process starts with the extraction of raw materials from quarries or mines. Heavy machinery such as excavators, loaders, and bulldozers are used to remove the raw materials from the earth. 2. Crushing and Screening: - The extracted raw materials often need to go through crushing and screening processes to reduce their size and separate them into different grades. - Crushers break down large rocks into smaller pieces, and screens sort the particles based on size. 3. Washing: - Washing is a common process to remove impurities such as clay, silt, and dust from the raw materials. This is particularly important for sand and gravel used in construction. 4. Grading and Sorting: - After washing, the materials may go through grading and sorting processes to separate them into different sizes and qualities. 5. Storage and Stockpiling: - Processed materials are often stored in stockpiles for further use. Adequate storage facilities are necessary to manage different grades of materials. 6. Conveying and Transportation: - Conveyor systems are used to transport materials between different stages of the production process. Transportation methods, such as trucks or conveyor belts, are used to move the final products to distribution points. 7. Quality Control: - Quality control measures are implemented to ensure that the final products meet the required specifications and standards. This may involve regular testing and analysis of the materials. 8. Environmental Considerations: - Sustainable practices and environmental considerations are crucial in the operation of a production plant. Measures such as dust control, water recycling, and rehabilitation of mined areas are often implemented to minimize the environmental impact. Cgjdjq Nia Iepfx Afnjn 9. Maintenance and Safety: - Regular maintenance of equipment is essential for the smooth operation of the plant. Safety measures are also critical to protect workers and ensure compliance with regulations. 10. Final Product: - The final products from a sand aggregate or gravel production plant may include various grades of sand, gravel, crushed stone, or other types of aggregates used in construction, concrete production, asphalt production, and other applications. It's important to note that the specific processes and equipment used in a production plant may vary based on the type of raw materials, the intended final products, and local regulations. Additionally, advancements in technology and sustainability practices may influence the design and operation of such facilities.

Condition: new, Year of construction: 2025, Creating a cheap portable or mobile sand making plant involves optimizing costs while maintaining functionality and efficiency. Here's a basic outline of components and considerations for designing a cost-effective portable sand making plant: 1. Portable Sand Making Machine: - Select a cost-effective sand making machine that meets your production requirements. Consider factors like capacity, efficiency, and maintenance costs. - Look for options that offer good performance at a lower initial investment. 2. Screening Equipment: - Choose a portable screening unit to separate the sand into different sizes. This is crucial for producing high-quality sand with the desired particle size distribution. - Consider modular screening units that are easy to transport and set up. 3. Conveyor Systems: - Utilize conveyors to transport raw materials between different components of the plant. Opt for simple and reliable conveyor systems. - Explore cost-effective conveyor options that are easy to maintain. 4. Hopper and Feeder: - Incorporate a hopper and feeder system to ensure a continuous flow of raw materials to the sand making machine. This helps optimize the production process. - Choose a design that minimizes material spillage and wastage. Cgodpfxeq N Ud Ie Afnon 5. Power Source: - Consider energy-efficient power sources to reduce operational costs. This could include using generators or connecting to the electrical grid, depending on the availability and cost of electricity in your location. 6. Chassis and Mobility: - Opt for a simple and robust chassis design that allows for easy transportation. Depending on your needs, choose between wheels or tracks for mobility. - Aim for a design that facilitates quick setup and dismantling to save time and labor costs. 7. Control System: - Implement a user-friendly control system that enables operators to monitor and adjust the sand making process efficiently. - Consider automation features that enhance control and reduce the need for constant manual intervention. 8. Dust Control and Environmental Considerations: - Integrate effective dust control measures to comply with environmental regulations and ensure a safe working environment. - Explore environmentally friendly features to align with sustainability goals. 9. Modular Design: - Consider a modular design for easy customization and scalability. This allows you to adapt the plant to varying production needs over time. 10. Used Equipment: - Explore the possibility of using refurbished or used equipment to cut down on initial costs. Ensure that the used equipment is in good working condition and can meet your production requirements. Remember that while cost optimization is important, it's crucial to maintain the quality and efficiency of the sand making process. Additionally, compliance with environmental regulations should be a priority. Always consider the specific requirements of your project and seek professional advice if needed.

Condition: good (used), axle configuration: 3 axles, first registration: 09/2016, total length: 9,890 mm, total width: 2,550 mm, total height: 1,210 mm, suspension: air, tire size: 275/70R22,5, wheelbase: 4,990 mm, color: other, Year of construction: 2016, Equipment: ABS, = Other Options and Accessories = - EBS = Remarks = Number of axles: 3, twin tyres, payload: 25,380 kg, unladen weight: 4,620 kg, gross weight: 30,000 kg, chassis type: complete chassis, chassis material: steel, suspension type: full air suspension, ABS, EBS, body material: steel, axle type: BPW = Further Information = General information Cab type: Day cab Registration number: 35-WP-LJ Driveline Fuel type: Diesel Transmission Gearbox: Manual transmission Axle configuration Tyre size: 275/70R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Twin tyres; Steered; Tyre tread left inner: 11 mm; Tyre tread left outer: 10 mm; Tyre tread right inner: 12 mm; Tyre tread right outer: 12 mm Axle 2: Twin tyres; Lift axle; Tyre tread left inner: 6 mm; Tyre tread left outer: 12 mm; Tyre tread right inner: 8 mm; Tyre tread right outer: 7 mm Axle 3: Twin tyres; Tyre tread left inner: 3 mm; Tyre tread left outer: 3 mm; Tyre tread right inner: 12 mm; Tyre tread right outer: 12 mm Weights Unladen weight: 4,620 kg Payload: 25,380 kg Gross vehicle weight: 30,000 kg Environment Emission class: Euro 0 Condition Technical condition: good Visual condition: good Damage: none = Company Information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range covers all European makes, years of manufacture, and price ranges. Cgsdpfexzy Rpsx Afnjn Why buy at Kleyn Trucks? Simply: • Large, fast-changing selection • Proven quality • Good prices • Honest business practices • Multilingual staff • We understand our customers • Assistance with import and transport • (Export) registration plates arranged quickly • Expert technical services • The safety of ‘recognisable quality’ • And more.... Visit our website for special offers and full stock list: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit your enquiry via our website. Ask us directly about our European warranty package.

Condition: used, axle configuration: 2 axles, first registration: 05/2006, loading space length: 5,800 mm, loading space width: 2,300 mm, loading space height: 2,250 mm, total length: 6,900 mm, total width: 2,450 mm, total height: 3,900 mm, suspension: air, tire size: 385/65R22,5, wheelbase: 5,350 mm, color: other, Year of construction: 2006, Equipment: ABS, = Additional options and accessories = - EBS = Notes = Number of axles: 2, Payload: 27,060 kg, Curb weight: 2,940 kg, Gross weight: 30,000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air, ABS, EBS, Body year: 2006, Axle type: BPW = Further information = General information Cab: Day cab Registration number: OJ-13-HP Drivetrain Fuel type: Diesel Transmission Transmission: Manual gearbox Axle configuration Tyre size: 385/65R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Tyre tread left: 18 mm; Tyre tread right: 18 mm Cgsdpfx Afoyg Dv Ujnsn Axle 2: Tyre tread left: 18 mm; Tyre tread right: 18 mm Weights Unladen weight: 2,940 kg Payload: 27,060 kg Gross vehicle weight: 30,000 kg Environment Emission class: Euro 0 Maintenance APK (Periodic Technical Inspection): Valid until 05.2026 Condition General condition: average Technical condition: average Visual condition: average Damages: none = Company information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our offering includes all European brands, model years, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing inventory • Recognisable quality • Competitive pricing • Fair trading practices • We speak many languages • We understand our customers • Support with import and transport • (Export) license plates arranged quickly • Professional technical services • The security of ‘recognisable quality’ • And more… Please visit our website for special offers and the complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send a request via our website. Ask directly about our European warranty package.

Condition: new, axle configuration: 3 axles, suspension: air, color: black, Year of construction: 2026, General information Year of manufacture: 2026 Axle configuration Make axles: VALX Brakes: disc brakes Suspension: air suspension Rear axle 1: Lift axle Weights Empty weight: 4.836 kg Carrying capacity: 39.164 kg GVW: 44.000 kg Functional Cgedpoyguuuofx Afnjn Extendable superstructure: Yes Condition General condition: very good Technical condition: very good Visual appearance: very good Financial information Price: On request Additional information Please contact Arie or Pedro for more information

Condition: new, functionality: fully functional, machine/vehicle number: NM0LKTP66XSP91889, mileage: 500 km, power: 242.71 kW (329.99 HP), first registration: 11/2025, fuel type: diesel, empty load weight: 10,487 kg, maximum load weight: 15,513 kg, overall weight: 26,000 kg, tire size: 315/70R22,5, tire condition: 100 %, axle configuration: 6x2, wheelbase: 5,600 mm, axle spacing: 1,350 mm, fuel: diesel, fuel tank capacity: 200 l, color: grey, driver cabin: day cab, gearing type: automatic, number of gears: 8, emission class: euro6, suspension: air, number of seats: 3, total length: 9,330 mm, total width: 2,550 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, loading space length: 5,500 mm, loading space width: 2,550 mm, Year of construction: 2025, Equipment: ABS, AdBlue, Bluetooth, USB port, air conditioning, airbag, central locking, electric window regulation, electronic stability program (ESP), fog lights, hill-start assist, non-smoking vehicle, onboard computer, power assisted steering, power mirror, seat heater, soot filter, start-stop system, tachograph, traction control, truck registration, IMMEDIATELY AVAILABLE Ford F-Line 6x2 330 HP with HYVA TITAN 20T Hooklift System Cgedsyhfkvopfx Afnon New vehicle, only used as a demonstration unit at local dealer! = VEHICLE = NEW Ford F-Line Road 6x2 Year of manufacture: 2025 Mileage: 500 km New truck, only used as a demo vehicle Aluminum fuel tank PTO on gearbox Latest type tachograph Manual air conditioning Radio with Bluetooth Axle configuration Axle 1: Tire size: 315/70 R22.5; Steerable; Suspension: leaf spring Axle 2: Tire size: 315/70 R22.5; Twin tires; Suspension: air suspension Axle 3: Tire size: 315/70 R22.5; Lift axle; Steerable; Suspension: air suspension Weights Unladen weight: 10,487 kg Payload: 15,513 kg GVW: 26,000 kg No towing weight = BODY = NEW HYVA TITAN T20-55-S Hooklift System – Container hook – Full specification - 20 ton maximum lifting capacity - Container length 5,500 mm - Equipped with HYDRAULICALLY EXTENDABLE REAR BUMPER - 2 small storage boxes on driver's side - Extendable tarpaulin rack on passenger side Offered by Sevan Janssens BV – Contact: Maxim Del'haye (+32475517317)

Condition: used, functionality: fully functional, 8 m Office Container / Shipping Container – with WC, Storage & Full Equipment – Immediately Available! PRICE: €7,500 negotiable, ex Dunkerque, France SHORT & TO THE POINT: ✅ Office, WC & storage in one container ✅ Fully equipped: heating, sink, heavy-duty power, awning ✅ Immediately available – only 4 units left! DETAILS & HIGHLIGHTS: We offer well-maintained 27FT office containers (8 m length) in excellent condition – perfect as office containers, site cabins or storage containers. The containers come from the equipment fleet of French CARGLASS and feature high-quality installations. All technical components are intact and ready for immediate use. The condition is guaranteed and confirmed on the invoice. Cjdpfeyhp Dmox Afnegn Equipment Overview: ✅ Separate WC with washbasin ✅ Office area with ample natural light ✅ Kitchenette with sink & hot water boiler ✅ Storage room ✅ Heating & air conditioning unit ✅ Electric awning 3x7 m with remote control ✅ Heavy-duty power connection, electrical installation & external lighting ✅ Ramp & fire extinguisher Features: ✅ Practical room layout: office – WC – storage ✅ Original photos – condition as shown ✅ Ideal as a site office, container office or mobile service point ✅ Technically sound, ready for immediate use DELIVERY & AVAILABILITY: ✅ Delivery within max. 2 weeks ✅ Delivery costs (without unloading): on request € ✅ Immediately available: 4 units Enquire & reserve now! Additional photos, technical drawings and details available upon request. MAGITU GmbH

Condition: used, functionality: fully functional, Offered here are used 20DV sea containers available from Duisburg. CONTAINER TYPE: 20DV Sea Container CONDITION AT DELIVERY: Used, wind and watertight, cargo worthy, equipped with a valid CSC plate, wooden flooring, sample images shown DIMENSIONS LxWxH: According to ISO standards External dimensions: 6,058 x 2,438 x 2,591 mm; Internal dimensions: 5,898 x 2,352 x 2,390 mm; Door opening: 2,338 x 2,280 mm; Volume: 33.1 m³; Weight: 2,200 kg Csdpfxsyhpkye Afnegn AVAILABILITY: Immediate TRANSPORTATION: Please provide your postal code so we can send you a free, no-obligation quote for the container including delivery and, if required, unloading from the truck. VARIETY: We also offer sea containers in all common sizes (20DV, 40DV, 20HC, 40HC, etc.) to suit any requirement. Ideal for storage, construction projects, logistics solutions, or sea transport. We look forward to hearing from you! MAGITU GmbH

Condition: used, axle configuration: 3 axles, first registration: 08/2014, total length: 11,900 mm, total width: 2,550 mm, total height: 1,400 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2014, Equipment: ABS, = Additional Options and Accessories = - EBS Cgsdpfjyfmfpsx Afnen = Remarks = Number of axles: 3, Own weight: 5515 kg, Gross weight: 40,000 kg, Chassis type: Complete chassis, Chassis material: Steel, Kingpin size: 2 inch, ABS, EBS, Body year of construction: 2014, Twist lock positions: 2x20 + 1x30 + 1x40 + 1x45, Extendable chassis: Rear extension, Axle type: BPW = Further Information = General information Cab: Day cab License plate: KLEYN1 Drivetrain Fuel type: Diesel Transmission Transmission: Manual gearbox Axle configuration Tyre size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; tyre tread left: 11 mm; tyre tread right: 1 mm Axle 2: tyre tread left: 13 mm; tyre tread right: 7 mm Axle 3: tyre tread left: 10 mm; tyre tread right: 4 mm Weights Unladen weight: 5,515 kg Payload: 34,485 kg Gross vehicle weight: 40,000 kg Environment Emission class: Euro 0 Condition General condition: Average Technical condition: Average Visual condition: Average Damages: None = Company Information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here, you can choose from a constantly changing inventory of 1,200 used trucks, tractor units, and trailers. Our range includes all European brands across various production years and price ranges. Why buy from Kleyn Trucks? Simple! • Large, fast-moving inventory • Recognizable quality • Competitive pricing • Professional salesmanship • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Expert technical services • The security of “recognizable quality” • And more… Please visit our website for special offers and the complete stock: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and submit a request via our website. Ask directly about our European warranty package.

Condition: good (used), axle configuration: 3 axles, first registration: 03/2018, suspension: air, color: red, Year of construction: 2018, Make axles: BPW Brakes: disc brakes Suspension: air suspension Empty weight: 3.540 kg Carrying capacity: 35.460 kg GVW: 39.000 kg Technical condition: good Visual appearance: good Csdpfjxyy S Djx Afnjgn Please contact Arie or Pedro for more information ADR : EX II - EX III - FL -AT

Condition: good (used), axle configuration: 3 axles, first registration: 03/2018, suspension: air, color: red, Year of construction: 2018, Make axles: BPW Brakes: disc brakes Suspension: air suspension Empty weight: 3.540 kg Carrying capacity: 35.460 kg Cgsdox Dbh Uspfx Afnsn GVW: 39.000 kg Technical condition: good Visual appearance: good Please contact Arie or Pedro for more information ADR : EX/II / EX/III / FL / AT

Condition: used, axle configuration: 3 axles, first registration: 02/2019, color: other, Year of construction: 2019, Empty weight: 5.430 kg Axle 1: left 4 mm right 5 mm Csdpoyhn T Tefx Afnogn Axle 2: left 9 mm right 9 mm Axle 3: left 8mm right 9 mm We have the possibility to stack trailers!

Condition: excellent (used), axle configuration: 2 axles, first registration: 01/2005, total length: 6,860 mm, total width: 2,470 mm, suspension: air, tire size: 425/65-R22.5, wheelbase: 5,410 mm, Year of construction: 2005, Equipment: ABS, = Additional Options and Equipment = - ADR - BPW axles - EBS - Air suspension - Drum brakes = Notes = Well-maintained 2005 PACTON 2-axle 20FT swap body chassis with BPW Eco-Plus axles and drum brakes, ADR (EX/II, EX/III, FL, AT) valid until 23/02/2026, ABS/EBS, unladen weight: 3,340 kg, gross vehicle weight: 35,000 kg, 2x 10-ton axles, 425/65-R22.5 tires (L: 15/16 mm; R: 15/16 mm), Dutch registration with valid technical inspection (APK) until 23/02/2026. = Further Information = Axle Configuration Tyre size: 425/65-R22.5 Axle brand: BPW Eco-Plus Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Max. axle load: 10,000 kg; Tyre tread left: 95%; Tyre tread right: 100% Rear axle 2: Max. axle load: 10,000 kg; Tyre tread left: 95%; Tyre tread right: 100% Weights Unladen weight: 3,340 kg Payload: 31,660 kg Gross vehicle weight: 35,000 kg Functional Body brand: LAG T2-003 Condition Technical condition: very good Visual condition: very good Identification Registration number: OH-98-TP Cgjdpfxeyhqr Es Afnsn Further Information Please contact Arne Honingh for more information.