Used Cbn for sale (72)

Condition: used, Year of construction: 1998, functionality: limited functionality, machine/vehicle number: 012729, overall weight: 920 kg, tooth pitch: 45 mm, total height: 1,680 mm, coolant pump power: 210 W, grinding wheel diameter: 250 mm, input voltage: 400 V, spindle speed (max.): 2,600 rpm, input frequency: 50 Hz, ISELI SBW Automatic Bandsaw Blade Sharpening Machine – Used For Sale – ISELI SBW Automatic Bandsaw Blade Sharpener Used ISELI SBW automatic sharpening machine for bandsaw blades, suitable for sawmill and industrial applications. The machine was used in our sawmill exclusively for sharpening our own bandsaw blades and was fully operational and in regular use right up until the day it was disconnected. The machine is fitted with 3 interchangeable cams for different tooth shapes. Please note: The tooth pitch adjustment is no longer operational. The machine is currently set to a fixed 45 mm tooth pitch, which was the pitch used in our sawmill. Technical Specifications Manufacturer: ISELI & Co. AG, Switzerland Model: SBW – Wet Grinding Grinding motor: 0.75 kW Driving motor: 0.30 kW Height adjustment motor: 0.37 kW Feed motor: 0.11 kW Cooling water pump: 0.21 kW Spray suction: 0.75 kW Tooth height: 6–25 mm Tooth pitch: Fixed at 45 mm (adjustment not operational) Rake angle: 5°–35° Blade width: 60–350 mm Blade length: 6,200–9,500 mm or 8,500–12,000 mm Sharpening speed: 20–40 teeth per minute (variable) Grinding wheel diameter: 200 or 250 mm (Borazon/CBN) Grinding wheel bore: 25 mm Grinding wheel widths: 6 / 10 / 12 / 13 mm Grinding spindle speed: 2,600 RPM Nedpfx Ako Abaldsijlh Machine height: 1,680 mm Net weight: 875 kg without blade support / 920 kg with blade support Approximate export packing volume: 4.5 m³ Condition Used machine in working condition. Previously operated in a working sawmill for our own blade maintenance, rather than commercial sharpening. The machine has not been tested since disconnection. Important: Sold as a used machine with a fixed 45 mm tooth pitch. Three tooth-profile cams are installed. Available for inspection by arrangement. Please contact us for further information or additional photographs.

Condition: excellent (used), Year of construction: 2011, MODEL AMADA TOGU EU PRESCISION TOOL GRINDING MACHINE WHEEL CBN 150 MAX TOOL DIAMETER 160 MAX GRINDING DEPTH ,ONE CYCLE, 0.99 SPINDLE MOTOR 1.5KW SPINDLE MOTOR SPEED 3000 RPM VERTICAL TRAVERSE 200 MACHINE WEIGT 470 KGS PWOER CONSUMPTION 4.8 KVA Nodpfx Aezx Sixjkijlh

Condition: good (used), Year of construction: 2015, functionality: fully functional, Vollmer sharpening machine for band saws, robust design. Blade width up to 360 mm. 2 switchable tooth profiles. Nsdoz Ad R Nepfx Akiolh Grinding wheel: CBN, 250 mm diameter, or ceramic grinding wheels.

Condition: good (used), functionality: fully functional, type of input current: three-phase, input voltage: 400 V, Tool grinding machine EWAG WS 11 INCLUDED EQUIPMENT: x1 infeed Z-axis : Infeed operation, metric 4 C x1 Cross feed X-axis 4 Q-M x1 grinding stroke 3H : operation of the grinding stroke either by lever or by hand wheel - ref : 111-2-15167 (WS11) x1 grinding spindle Q 36-12, complete 9 JKP x1 workhead spindle with W25 collet reception x1 foot switch 9 M - operation of infeed Z-axis by foot peadal. Infeed stroke steplessly adjustable x1 ISOMA microscope - optic from the front x1 measuring table for microscope x1 ISOMA microscope - optic from the top x1 SIEGFRIED STTV acoustic touch control (grinding wheel to workpiece) in is case x7 grinding wheel flanges Various CBN grinding wheels Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine for sharpening tools, milling cutters, taps and drills. Machine similar to brands Blohm, Elb, Ewag, Favretto, Fenix, Ger, Jones & Shipman, Jung, Karstens, NUMAFFUT, Okamoto, Okuma, Saacke, SMP, Studer, Vollmer, Walter; also consider cylindrical or surface grinding machines, lathes, machining centres and milling machines. Nedez I Tbxopfx Akiolh

Year of construction: 2016, condition: used, overall weight: 16,000 kg, total length: 4,500 mm, total width: 2,600 mm, total height: 2,200 mm, JUNKER JUPITER 500 – CNC Cylindrical Grinding Machine Plunge-Cut Method Technical Data: Workpiece diameter: 2–220 mm Workpiece length: max. 500 mm Corundum grinding wheel: 610 × 500 × 305 mm CBN grinding wheel: 500 × 500 × 305 mm Spindle drive: 37 kW Regulating wheel: 350 × 500 × 203 mm Nodpfx Akjz E T Tpoislh Regulating wheel speed: 1–800 rpm Regulating wheel drive: 11.5 kW Power: 81 kVA Weight approx.: 16,000 kg Dimensions (LxWxH) approx.: 4500 x 2600 x 2200 mm Year of construction: 2,016 Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: No

Condition: used, Year of construction: 1993, operating hours: 6,700 h, functionality: fully functional, grinding length: 1,000 mm, grinding width: 600 mm, total height: 2,660 mm, total length: 3,550 mm, total width: 3,150 mm, grinding height: 400 mm, grinding wheel diameter: 400 mm, table length: 1,000 mm, type of input current: three-phase, table width: 550 mm, grinding wheel width: 100 mm, overall weight: 6,100 kg, grinding spindle motor power: 11,000 W, input voltage: 400 V, disc diameter: 400 mm, We are offering this used ELB-Schliff BD10 Perfekt NC surface grinding machine, manufactured in 1993. Operating voltage: 3 x 400 V Frequency: 50 Hz Rated current: 37 A Fuse: 50 A Nledpfjzzlxxox Akieh Control voltage: DC 24 V DC voltage: 215/320 V Retrofit and conversion to NC with modern control Scraped X and Z axes, control cabinet completely new Overhead and table dresser Magnetic clamping plate 1000x550 High productivity due to max. grinding wheel width of 100 mm (400x100x127) Unused, attractive accessories available on request CBN & Dia grinding wheels, 1 additional flange, vacuum table 600x400 If you have any questions or require further information, please send us a message or call us.

Condition: used, Year of construction: 2008, Suitable for unmanned grinding or re-serration and chamfering of HSS and segment sawblades as well as solid carbide saws with ceramic saws and for deep grinding with CBN or diamond grinding wheels. Accessories: Total enclosure including 400 L coolant system with tank and fine filter, Device for automatic chamfering of regularly spaced saw blades, Device for automatic grinding of chip breaker grooves, Program for standard curved and pointed teeth, Nljdpfoz Nxh Isx Akieh Special program for grinding saws with variable tooth pitch, CAD program for creating 250 custom tooth shapes, Automatic saw blade diameter adjustment, Automatic fire extinguishing system including explosion vent and pressure switch, Laser measuring system for automatic measurement of saw blade diameter, Automatic central lubrication, Oil drip tray, 2 saw blade holders, 2 centering rings, Machine light, Electrostatic mist extractor LTA.

Condition: used, Year of construction: 2012, spindle speed (max.): 250 rpm, overall weight: 7,000 kg, Cylindrical grinding machine Manufacturer: JUNKER Type: Jucam 1000 /11S Year of manufacture: 2012 Technical data: - Workpiece diameter: 15–70 mm - Swing diameter: max. 150 mm - Clamping length: max. 500 mm - Swing diameter over steady rest area: 70 mm Workpiece spindle: - Dimensions: 150 x 300 mm - Max. speed: 250 rpm Tailstock: - Longitudinal adjustment: manual via sprocket Tailstock quill: - Fixed center MT 4 (Junker D75 mm) - Clamping pressure Adjustable by hydraulics Grinding table: - Travel path - Z: max. 1,000 mm - Feed Z-axis (CNC-controlled) Grinding spindle I: - Dimensions: D 205 x 450 mm - Flange diameter: D 190 mm - Standard collar: D 127 mm - Drive: 30 kW - Speed control via frequency converter - Max. speed: 4,400 rpm Grinding wheel I: - Type: Borazon (CBN) or Diamond - Diameter: 450 mm Nlodpfx Aox H Andekieh - Bore: D 127 mm - Peripheral speed: max. 90 m/sec Steady rest: - Type: GR-3520-NR - Diameter range: D 20 – D 35 mm Dressing spindle: - Dimensions: D 80 x 250 mm - Flange: D 100 - Standard collar: D 75 - Drive: 1.8 kW - Max. speed: 24,000 rpm - Machine weight: approx. 7.0 t 2 identical machines are available. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: UWIA/1058/90, SAACKE Universal Tool Grinding Machine UW IA – Year of Manufacture 1990 MANUFACTURER & MODEL - Manufacturer: Gebr. SAACKE GmbH & Co. KG, Pforzheim (est. 1932) - Model: UW IA (Universal Tool Grinding Machine) - Serial Number: UWIA/1058/90 - Year of manufacture: 1990 - Electrical diagram no.: UWIA-0-161A CONDITION Very good, well-maintained overall condition. Fully functional, tested and ready for operation. Shows normal signs of use. DIGITAL DISPLAY - Heidenhain VRZ 710 (2-axis position display) - Program 212 994 04, ID no. 229 328 01 - Made in West Germany GRINDING SPINDLE DRIVE DATA - Motor type KK 5 S (3~) - 0.37 kW, 2800 rpm - 220/380 V, 1.85/1.07 A - Spindle speeds: 2100 / 3000 / 4200 / 6000 rpm (4-step) WORKPIECE SPINDLE DRIVE DATA - Georgii-Kobold motor KDD 648 P1/FW (3~) - 0.70 / 0.85 kW, 1400 / 2800 rpm - 380 V, 1.8 / 2.2 A, IP 54, tropical insulation - Made in West Germany ELECTRICAL DATA (GENERAL) - Operating voltage: 380 V (3-phase, 50 Hz) - Control voltage via transformer: 220 V - Lighting voltage: 220 V - Rated power: 1.3 kW - Rated current of the machine: 2.8 A - Circuit protection rated current: 10 A EQUIPMENT & FEATURES - Swiveling worktable ±90° - Tailstock - Workpiece spindle with separate drive - Grinding spindle head with 4 speeds Nedey Er Ahjpfx Akijlh - Heidenhain VRZ 710 digital display (2 axes) - Tool cabinet including approx. 15 CBN grinding wheels - Machine is mobile on 4 castors APPLICATION Classic universal tool grinding machine for grinding turning and milling tools, drills, reamers, profile tools, as well as round and flat profiles. Ideal for grinding shops, tool making, and maintenance. LOCATION & TRANSPORT Location: Central warehouse, Köck Auction House, 6178 Unterperfuss, Austria. Collection in person or freight shipping by arrangement. Transport costs on request (depending on delivery address). All information without guarantee. Subject to errors and misprints.

Condition: excellent (used), Year of construction: 2006, functionality: unexamined, overall weight: 8,000 kg, JUNKERS FLUTEMAT: a CNC machine for highly flexible groove grinding. The FLUTEMAT is the perfect machine for creating grooves in various tool types. For example: • Application: Grinding 3 or 4 chip and flute grooves in HSS taps, milling cutters, and reamers. • Workpiece diameter: Diameter from 2 to 16 mm. • Clamping system: The thread tool is precisely fixed in a square clamping device and the tailstock center. • In-process dressing: A CNC-controlled dressing unit is located directly behind the grinding spindle. • Enormous speed: a cycle time of approx. 75 seconds for an M12 HSS tap. • Design: The machine features a vibration-damping machine bed made of mineral cast. • Control: Modern control technology via the company's own Erwin Junker Operator Panel (EJ-OP). • Grinding media: Extremely durable CBN or diamond grinding wheels are used. • Manufacturer: Erwin Junker Maschinenfabrik GmbH • Model: FLUTEMAT • Year of manufacture: e.g. 2006 • Control: CNC Junker Operator Panel, e.g. Siemens Sinumerik • Workpiece diameter range: approx. 2 – 16 mm • Total workpiece length: Max. e.g. 150 mm • Number of grooves: 3- or 4-groove tools (straight and helical grooves) • Grinding spindle drive: e.g. 7.5 kW / 11 kW • Grinding media: Designed for CBN and diamond grinding wheels • Dressing unit: Integrated, CNC-controlled in-process dressing unit Nljdpfxozya Hhe Akish • Machine bed: Vibration-damping mineral cast • Included accessories: Oil mist extraction, • Coolant system • Robot cell with various clamping tables, • Various grinding wheel flanges, • Documentation/manuals. For more information? For example, a VIDEO is available upon request by email.

Condition: used, Year of construction: 1999, KBN 560 (Ecostar) HSS and segmented circular saw blade grinding machine (CNC controlled) Suitable for the automatic grinding, re-tooth cutting and beveling of HSS and segmented circular saw blades, as well as carbide-tipped circular saw blades, using the deep grinding process with CBN or diamond grinding wheels. Nlodpj Aba Rmefx Akijh Technical data: Working range: Diameter (20) 80 - 560 mm, tooth pitch 1 - 25 mm, number of teeth 2 - 998, saw blade thickness up to 8 mm; Grinding wheels: Grinding wheel diameter 200 mm, grinding wheel bore diameter 32 mm, connection value 5.5 kW (400 V / 50 Hz), weight approx. 980 kg, dimensions W x D x H = 1600 x 1750 x 1996 mm, color blue RAL 5014 / gray RAL 7035. Accessories: Full enclosure, wet grinding system, automatic central lubrication, program for beveling regularly toothed saw blades, Vario-Zahn software for the automatic grinding of different tooth pitches, measuring grinding program for grinding saws to the same outer diameter, special program for full carbide teeth, machine light. Optional accessories: Extraction system, grinding wheel flange, holder for small saws. Condition: The machine is in good technical condition. Please refer to the attached photos and video for further details regarding the condition.

Condition: excellent (used), Year of construction: 2002, VDF BOEHRINGER NG 180-2 CNC Lathe / Turning Center Year of manufacture: 2002 Machine No.: 1130.2601-30 Country of manufacture: Germany Control: Siemens SINUMERIK 840D Drive system: Siemens SIMODRIVE 611 Nlodpfx Akszvfhieieh Technical Data Turning diameter: 290 mm Turning length / distance between centers: approx. 850–900 mm Swing diameter over bed: 600 mm Spindle bore: 80 mm Main spindle speed: 10–4,000 rpm Main spindle drive: Direct drive, suitable for CBN hard turning Spindle drive power at 40% ED: 56 kW Maximum spindle torque at 40% ED: 605 Nm Tool turret: 12 positions Number of turrets: 1 Driven/live tool capability: 12 stations Tool holders: Included / fitted as shown Main spindle chuck: 3-jaw Autoblok chuck The machine is equipped with a second spindle / counter-spindle arrangement, visible on the right-hand side of the working area, together with workpiece support/handling equipment. The photographs also show additional machining/tooling positions around the turret. Electrical Data Supply voltage: 400 V Phases: 3 AC Frequency: 50 Hz Main fuse rating: 125 A Rated current indicated on machine: 100 A Machine Dimensions and Weight Length: approx. 5,949 mm Width: approx. 2,300 mm Height: approx. 2,230 mm Machine weight: approx. 10,000 kg Machine: VDF BOEHRINGER NG 180-2 Year: 2002 Serial No.: 1130.2601-30 Control: Siemens SINUMERIK Max. turning diameter: 290 mm Turning length: approx. 850–900 mm Spindle bore: 80 mm Spindle speed: 10–4,000 rpm Spindle power: 56 kW Turret: 12 positions Dimensions: approx. 5,949 × 2,300 × 2,230 mm Weight: approx. 10,000 kg

Condition: used, Year of construction: 2014, workpiece length 100 mm swing diameter 80 mm number of spindles 2 Control FANUC 31i-B5 workpiece weight 2,00 kg centre height 170 mm Nlsdpfsyycwfox Akieh grinding wheel diameter 100 mm grinding wheel hole diameter 32 grinding wheel width max. 20 peripheral speed max. 125 m/sec passage of steadyrest 45 - 60 mm total power requirement 75,00 kW weight of the machine ca. 25,00 t dimensions of the machine ca. 5,00 x 3,50 x H3,50 m Cam grinding machine for Cam-Pieces with FANUC 31i-B5 control; loading/unloading unit, CO2 extinguishing system; for CBN grinding wheel; tailstock; steady; diamond wheel dresser mounted on the dressing spindle; Wheelhead variant 12 (two grinding spindles can be moved separately).

Condition: used, Year of construction: 2015, workpiece length 100 mm swing diameter 80 mm number of spindles 2 Control FANUC 31i-B5 Nedpfx Akjyycv Ueielh workpiece weight 2,00 kg centre height 170 mm grinding wheel diameter 100 mm grinding wheel hole diameter 32 grinding wheel width max. 20 peripheral speed max. 125 m/sec passage of steadyrest 45 - 60 mm total power requirement 75,00 kW weight of the machine ca. 25,00 t dimensions of the machine ca. 5,00 x 3,50 x H3,50 m Cam grinding machine for Cam-Pieces with FANUC 31i-B5 control; loading/unloading unit, CO2 extinguishing system; for CBN grinding wheel; tailstock; steady; diamond wheel dresser mounted on the dressing spindle; Wheelhead variant 12 (two grinding spindles can be moved separately).

Year of construction: 2015, condition: new, functionality: fully functional, machine/vehicle number: 051, We offer this new Kohlbacher BARACUDA 750 side grinding machine for band saws, year of construction 2015. Manufacturer: Kohlbacher GmbH Model: BARACUDA 750 Serial number: 05N Type: BARACUDA 750 Manufacturing date: 06/2015 Construction year: 2015 Condition: new Technical details: Nledpfx Aozuc Uqokijh - CNC control - Bosch Rexroth controller - Central electrical blade height adjustment - Saw blade clamping system, clamps the blade automatically tight when grinding - Grinding wheel is direct driven, eliminates vibrations and deep pass (heavy removal) operation is possible - Grinding heads are guided by pre loaded ball rail systems to assure optimum accuracy - Width of band saw blades 30 – 260 mm - Blade thickness 0,6 – 2 mm - Pitch min./max. 15 – 60 mm - Working speed 0 – 12 Teeth/min. - Grinding wheel diameter 125 mm CBN - Grinding wheel motor 2 x 1,5 kW - Pump cooling system 60 l/min. - Weight 1050 kg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, warranty duration: 6 months, Function The TAM 25/600 precisely separates and cuts ejector pins, ejector sleeves, and knockout punches in the shortest possible time. Workpieces with diameters from 0.5 to 25 mm made of tool steel and hard metal can be processed. Your advantages: • User-friendly quick-change system • Fast loading and unloading of workpieces • Separating and cutting to length in a single operation Nlsdpfx Aezq Srwskish Simply place the workpiece in the quick-change prism, set the desired finished dimension, and separate and cut to length in one step. An optional additional clamping device is available for extremely thin, short, or offset pins. • Additional clamping device for thin, short, and offset pins Precision After separating, the work table is locked in the end position, the length is measured precisely, and ground to the finished dimension using an integrated micrometer feed. The wear of the grinding wheel is compensated by tracking the grinding spindle. Your advantages: The integrated diamond automatically dresses the wheel. On request, CBN or diamond grinding wheels are also available as optional equipment for the TAM 25/600. • Precise workpiece positioning via micrometer screw • Integrated dressing diamond for the grinding wheel • Integrated coolant system to prevent overheating of the workpiece • Trackable grinding spindle, so that the cutting edge of the grinding wheel always remains in the 0 position We also offer overhaul services for your old separating and cutting machine; simply contact us!

Condition: used, TECHNICAL DETAILS - Distance between tips : 400 [mm] - Tip height : 125 [mm] - Max. workpiece weight between tips : 150 [kg] - Z axis stroke : 600 [mm] - Z axis rapid feed : 15 [m/min] Nsdpfx Aouhbx Hekijlh - Table orientation : +/- 6 [°] WHEELHEAD - Grinding wheel dimensions : 500 x 80 x 203.2 [mm] - Peripheral speed : 60 [m/sec] - Power : 9.5 [kW] - Head position : -30 [°] WORKPIECEHEAD - Type of cone : CM5 - Speeds : 5 - 1500 [rpm] - Power : 2.1 [kW] - Bore : 34 [mm] TAILSTOCK - Cone : CM3 - Quill stroke : 80 [mm] POWER SUPPLY - Voltage : 400 [V] - Frequency : 50 [Hz] - Installed power : 16 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3.650 x 3.050 [mm] - Machine height : 2.000 [mm] - Machine weight : 4.850 [kg] MACHINE HOURS - Number of working hours : 31000 [h] EQUIPMENT - CNC : Siemens 840 D - Remote electronic handwheel - Automatic tailstock - Diameter and length control - Loading/unloading robot - Cooling unit - Coolant tank - Oil mist extractor - Wheel diamond grinding device - 2nd grinding head with CBN wheel and rotary wheel dresser - Fire extinguisher * *NB : working order not guaranteed. To have it checked by a qualified organization of the buyer.

Condition: excellent (used), Year of construction: 1988, TECHNICAL DATA. Max. clamping length: 90 mm Tool clamping height with tapered shank: 50 mm Nedpfx Ajwwkacskislh Tool clamping height with straight shank: 45 mm Max. helix angle: 45° Number of clamping positions: 1 to 99 Max. slide travel: 550 mm Max. grinding wheel diameter: 350 mm Min. grinding wheel diameter: 150 mm Grinding wheel speed (variable): up to 2700 rpm Swivel range of grinding spindle axis: 0° to 15° Grinding slide feed rate (variable): 0.05 to 16 mm/min (with 3rd and 4th axis: 0.05 to 8 mm/min) Workpiece spindle taper: ISO Taper No. 40 Grinding Wheel Data CBN and diamond cup grinding wheel: Ø200 mm → Min. DFF: 66 (3rd axis), 76 (4th axis) Ø250 mm → Min. DFF: 16 (3rd axis), 26 (4th axis) CBN-ES cone grinding wheel: Ø200 mm → Min. DFF: 50 (3rd axis), 60 (4th axis) Ø250 mm → Min. DFF: 0 (3rd axis), 10 (4th axis)

Year of construction: 2007, condition: ready for operation (used), A CNC precision grinding machine Peter Wolters with two opposing grinding wheels and a workpiece/carrier disc system for simultaneous machining of both workpiece sides is available. Carrier wheel outer diameter: 1050mm, carrier wheel ring diameter: 290mm, max. workpiece height: 100mm, machine dimensions X/Y/Z: approx. 2350mm/3400mm/2400mm, weight: approx. 7000kg, control: Siemens Simatic S7-400 with WinCC visualization, operating hours: approx. 7000h. Including twin loader, buffer table, CBN fine grinding wheels, dressing wheels, ultra-fine measuring system, temperature monitoring, remote maintenance system, wear compensation and alignment system. Without filter system and cooling system. Documentation available. An on-site inspection is possible. Nljdpfx Ajy R Drlskijh

Condition: reconditioned (used), Year of construction: 1998, functionality: fully functional, grinding length: 2,200 mm, grinding width: 500 mm, grinding height: 450 mm, grinding wheel diameter: 400 mm, table speed: 30,000 mm/min, table length: 2,200 mm, table width: 500 mm, grinding wheel width: 100 mm, spindle speed (max.): 4,000 rpm, overall weight: 10,000 kg, rapid traverse X-axis: 30 m/min, warranty duration: 12 months, Precision surface grinding machine, 2200 x 500 mm, workshop-refurbished with a 12-month warranty, available immediately. Includes delivery, commissioning, service, and spare parts, all from a single source. Custom-made by Mägerle with a narrow, semi-enclosed cabin for a Swiss customer. Magnetic table 2200 x 500 mm CNC control system Sinumerik 840 D Grinding wheel drive 25 kW Grinding wheel diameter x width = 400 x 100 mm Peripheral speed 45 m/sec (can also be retrofitted for CBN up to 8,000 rpm upon request) Nlodpfszbyp Tox Akijh Feed rate range (X / Y / Z) 30 / 3 / 3 mm/min Smallest increment 0.001 mm Balancing device Dittel MBA 5000 Total power requirement 82 kVA Machine weight approx. 12 t Space requirement approx. 6.00 x 3.00 x 2.80 m

Condition: used, Year of construction: 2003, max. grinding diameter 5-50 mm grinding length 350 mm workpiece length 50-300 mm diameter 5-50 mm current capacity 70 kVA Control Siemens Sinumerik 840D weight of the machine ca. 9 t dimensions of the machine ca. 3300x2950x2400 m Power supply: 400 V/50 Hz Power: 70 kVA Fuse protection: 3X125A Conductor cross-section: 5X25 mm² Cu Workpiece diameter: ? 5-? 50 Workpiece length: 50-300 - Manual loading and unloading - External fully automatic loading device - Workpiece spindle stock fixed on grinding table Workpiece spindle unit: Dimensions: ? 135 x 400 mm Lubrication: Permanent grease lubrication Njdpfx Aksyan R Nsiolh Bearing seal: With sealing air Drive: with HF motor Special mount: Junker standard collar ?75 mm Max. speed: 6000 min. -1 Tailstock: Longitudinal adjustment: manual Turning center: Junker standard collar ? 48 mm (?75 mm) Grinding table: Feed: Z-axis Grinding headstock: Feed: X-axis Horizontal swivel: B-axis HF grinding spindle unit I, II, III Dimensions: ? 165 x 350 mm Flange: ? 190 mm Standard collar: ? 127 mm Lubrication: Permanent grease lubrication Bearing seal: With sealing air Drive: 8 kW Balancing: Electronic Speed max. 8800 min -1 Grinding wheel I, II, III Type: Borazine (CBN) ceramic bonded Diameter: ? 350 mm Bore: ? 127 mm Coating width: max. 5 mm (standard) Peripheral speed: max. 140 m/s

Condition: used, Year of construction: 2000, grinding diameter 300 mm grinding length 1200 mm workpiece turning speeds 6000 U/min max. workpiece weight 70 kg control FANUC peripheral speed 140 m/sec grinding wheel size CBN 400 x 5 mm Spindle power 24 kW weight of the machine ca. 11 t Quickpoint 5002/10 CNC external cylindrical grinding machine, built in 2000 - Regular maintenance carried out - Documentation available Special accessories: - Junker novotecnic cooling lubricant system - 2x LTA II R/H extraction systems - Hyfra recooler - 4 grinding wheel blanks - Oil pan with grating *Disclaimer: All information is non-binding and may be incomplete or inaccurate. Subject to change without notice. No liability is accepted for the accuracy or completeness of the information provided. Njdpfjy Dibxex Akiolh The disclosure or transfer of the data provided by us is not permitted without our express written consent. Translated with (free version)

Year of construction: 2023, operating hours: 4,371 h, condition: ready for operation (used), travel distance X-axis: 460 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 660 mm, spindle motor power: 11,500 W, spindle speed (max.): 10,500 rpm, number of axes: 5, This 5-axis WALTER HELITRONIC RAPTOR DIAMOND was manufactured in 2023. It features a tool diameter capacity of Ø3-290 mm, with an optional extension up to Ø400 mm, and a maximum tool length of 270 mm. The machine is designed for the production and regrinding of carbide, HSS, PCD, and CBN tools. If you are looking to get high-quality grinding capabilities, consider the WALTER HELITRONIC RAPTOR DIAMOND cylindrical grinding machine we have for sale. Contact us for further details. • Operating hours: approx. 4,371 h • Working range: • Tool diameter: Ø3–290 mm (optional up to Ø400 mm, depending on configuration) • Maximum tool length: 270 mm (optional up to 350 mm, depending on configuration) • Maximum tool weight: 50 kg Nsdpfezxg Tfox Akiolh • Axes: • Number of CNC axes: 5 • Linear axis speed: up to 15 m/min • Spindle: • Max grinding wheel diameter: Ø200 mm • Interface: HSK • Belt-driven, double-ended spindle • Grinding / Eroding: • Grinding and EDM in one setup • For carbide, HSS, PCD, CBN tools • Configurable for up to 3 electrodes and 3 grinding wheels, or alternatively up to 6 grinding wheels • Control / Machine design: • WALTER / UNITED GRINDING CNC control • Enclosed working area with automatic protective door • Installed machine options/features: • Upper table • Glass scales • Reinforced A-axis, up to 750 rpm • Preparation for automatic calibration/probe • Grinding wheel measuring probe • Automatic fire suppression system with leak detection • TS-Remote Ready • Keyboard support • Oil leak sensor • Connection for external filtration system Additional equipment • Automatic loading/manipulator system for shank tools (automatic tool loader/manipulator) • Process cooling system • Coolant/dielectric filtration and circulation system • Coolant/dielectric system • Tool holders • Flanges/adapters • Grinding wheel/electrode accessories • Automation/handling: • TOP loader • 12 pallets • Filtration/cooling/extraction: • Oil mist extraction system • Extraction silencer • Oil cooling unit • Filtration system with tank and pump • Workholding/tooling: • Collets 6–16 mm • Collets 16–32 mm • 351 ES collets: 6, 8, 10, 12, 16 mm • 4 x 351 ES collet sets • Collets: 6, 8, 10, 12, 14, 16, 18, 20, 25 mm • Automatic holder 6–16 mm • Automatic E386 holder, 16–27 mm • Manual hydraulic holder, diameter 32 mm • ISO 50 socket • ISO 50 arbor • 2 x 50 mm HSK electrode holders • 4 x 45 mm HSK grinding wheel holders • Grinding wheel holder for dressing • Grinding wheel set measuring adapter • HSK calibration disc • Calibration roller • Measuring: • Heliset Plus measuring device • Software/options/packages: • Tool Studio for PC • Tool Studio Step Tools • 45-degree P-System sharpening option • P36 wood drill tooling package • Drill package • Hoger P58 package • Consumables: • 4 x 208 l dielectric fluid

Condition: used, TECHNICAL DETAILS - Distance between tips: 400 [mm] - Tip height: 125 [mm] - max. workpiece weight between tips: 150 [kg] - Z axis stroke : 600 [mm] - Z axis rapid feed : 15 [m/min] - Table orientation : +/- 6 [°] WHEELHEAD - grinding wheel dimensions: 500 x 80 x 203.2 [mm] - peripheral speed: 60 [m/sec] - Power : 9.5 [kW] - head position : -30 [°] WORKPIECEHEAD - Type of cone : CM5 - Speeds : 5 - 1500 [rpm] - Power : 2.1 [kW] - Bore : 34 [mm] TAILSTOCK - Cone : CM3 - Quill stroke : 80 [mm] POWER SUPPLY - Voltage: 400 [V] - Frequency: 50 [Hz] - Installed power: 16 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3.650 x 3.050 [mm] - Machine height : 2.000 [mm] - Machine weight : 4.850 [kg] MACHINE HOURS - Number of working hours : 42000 [h] EQUIPMENT - CNC : Siemens 840 D - Remote electronic handwheel - Automatic tailstock - Diameter and length control - Loading/unloading robot - Cooling unit - Coolant tank Nledpouhbxyjfx Akijh - Oil mist extractor - Wheel diamer - 2nd grinding head with CBN wheel and rotary wheel dresser - Fire extinguisher * *NB : working order not guaranteed. To have it checked by a qualified organization of the buyer.

Condition: used, Year of construction: 2004, Suitable for automatic grinding or re-serration and chamfering of HSS and segment saw blades as well as solid carbide saws with ceramic grinding wheels and deep grinding with CBN or diamond grinding wheels. Accessories: Total enclosure, Sawblade magazine with 3 saw blade stacks each with a stack height of 250 mm (for approx. 35 saw blades each) #9007511, Device for automatic chamfering of sawblades from Ø 145 mm, Automatic threading of the grinding wheel, Automatic fire extinguishing system, Automatic central lubrication, Coolant system 400 L with coolant tank with filter system, Nlodpfxsw I Sk No Akieh Machine lamp, Oil collecting tray, 3 sawblade mandrels (loader). Saw diameter: 40-710mm Tooth pitch: 1 - 55mm Number of teeth: 2 - 998 Saw blade thickness: max. 8 mm Grinding wheel diameter: 200x32mm Connected load: 10kW (400V / 50Hz) mass: about 3200 kg Dimensions: L x W x H = 1198 x 1750 x 2015 mm colour: blue/grey RAL 7047 / blue RAL 250-50-20.