Used Kgs 1670 for sale (64,662)

Condition: good (used), Year of construction: 1969, Container rotator, boiler rotator, welding rotator, welding rotator, welding device, welding turntable, welding rotator Nedpfszd Rd Sox Abyedc -Manufacturer: Deuma Heaters, Container Rotating Device Welding Rotating Device Type W05 -Load capacity: 9500 kg -Roller spacing: 600 - 1670 mm -Rollers: Ø 395 mm -Rolling speed: 0.2 to 1.45 m/min Right/Left rotation -Control unit: with manual control -Individual components: see photos -Transport dimensions: 2770/1120/H560 mm / 2350/990/H560 mm -Weight: 2510 kg

Condition: good (used), Sales counter, counter, stainless steel, cabinet, work table -Drawers: 2 -Table dimensions: 700/1600/H830 mm -Roof dimensions: 1800/1670/H2330 mm -Design: stable Ndedob Uhniepfx Abysc -Transport dimensions: 2060/730/H870 mm -Weight: 120 kg

Condition: good (used), Year of construction: 2020, functionality: fully functional, Avermann chain belt conveyor, KGS GB1500, year of manufacture 2020 Technical data: Manufacturer: Avermann Maschinenfabrik Year of manufacture: 2020 Length of feed belt: 6804 mm Length of incline belt: 11045 mm Gooseneck: 2168 mm Usable width: 1400 mm Belt width: 1500 mm Incline angle: 27.5° Drive power: 4.0 kW Conveyor speed: 0.23 m/s Electrical connection: 400 V Fuse rating: 8.9 A The bale press shown in the photos is not included in the scope of delivery and can be purchased optionally. Ndedpezyl H Tefx Abyoc Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors that may occur. The offer is non-binding, subject to prior sale, and may be withdrawn at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without any warranty.

Condition: used, machine/vehicle number: H2X393A00281, Year of construction: 2010, operating hours: 10,577 h, load capacity: 2,500 kg, lifting height: 4,015 mm, mast type: duplex, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,500 kg Lifting height: 4,015 mm Fork length: 1,200 mm MACHINE DETAILS Ndsdpfx Ajz Nyn Aebyec Mast: Duplex mast Mast design: Free-lift mast Drive type: Diesel Engine: VW Dimensions & Weight Dimensions (L x W x H): 3,800 x 1,200 x 2,641 mm Own weight: 4,160 kg Operating hours: 10,577 h Next service: in 739 operating hours EQUIPMENT Free-lift mast without central hydraulic cylinder 3rd hydraulic valve Side shifter Half cabin with windshield wiper LED work light, front LED work light, rear Orange warning light Comfort seat Previously a Linde full-service unit All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible for truck heights of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not made on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 249

Condition: like new (used), Year of construction: 2019, Weight 6250 kg Size 5810 × 2545 × 2445 mm Design Table clamping area 1500 x 600 mm Max. table load 1300 kg Longitudinal table movement 1600 mm Table groove (number/width) 3/ 16 mm Table feed 7 – 25 m/mm Min./Max. Distance spindle nose-table max. 600 mm Handwheel pitch vertical 0.002 mm Handwheel revolution vertical 0.5 mm Automatic grinding feed 0.002 – 0.02 mm Vertical rapid traverse (Y-axis) 230 mm/min Cross travel 660 mm Cross feed per stroke 0.1 – 12 mm Cross rapid traverse 1250 mm/min Ndsdjvwdhhopfx Abyoc Handwheel pitch transverse 0.02 mm Handwheel revolution transverse 5 mm Grinding spindle motor 7.5 kW Grinding spindle speed 1450 rpm Grinding wheel 355 x 50 x 127 mm Hydraulic motor 3.7 kW

Condition: reconditioned (used), Year of construction: 1995, functionality: fully functional, This refurbished GMC saw is equipped with a sliding table that prevents cutting through the support rails. The saw is designed for cutting boards, especially in environments where there is not enough space for a conventional panel saw or large-format saw. This saw is used for cutting large-format panels – boards made of laminate, chipboard, MDF, and other panel materials, such as plastics. A key advantage is its minimal footprint – it can be placed against a wall, and the cutting of panels takes place in a vertical position. The panels are moved across the saw using a table with rotating rollers, and the cutting unit is guided manually by the operator in both horizontal and vertical directions. The machine is equipped with folding stops for convenient measurement. Technical specifications: -Cutting length 4300 mm -Vertical cutting height: 1950 mm -Max. horizontal cutting height: 1850 mm -Max. cutting depth approx. 80 mm -Motor 4 kW -Saw blade 300 mm -Arbor 30 mm -Blade speed 5200 rpm -Motor speed 2800 rpm -Weight 500 kg Equipment: -Movable support table consisting of 13 rails Nodjvva Nxepfx Abyjdc -Transport wheels for moving the panels -Main saw blade, carbide-tipped, Z 48 -Middle tilting support -Lower aluminum supports -Dust extraction hose -2 adjustable stops for vertical cuts -1 repeating device for horizontal cuts -1 central + 1 lower guide for vertical cuts -3 guides for horizontal cuts

Condition: like new (used), Year of construction: 2021, machine/vehicle number: see PDF files, FANUC CRX-10iA/L collaborative robot (cobot) – 10 kg / 1418 mm – 05/2021 – first owner, very low use – incl. vacuum gripper + CE base Description: For sale: FANUC CRX-10iA/L collaborative robot (cobot), build date 05/2021, payload 10 kg and reach 1418 mm. From first owner and hardly used. The robot was purchased for a specific application/project, but the concept did not work as intended; therefore the installation was taken out of service and stored in 2021/2022. Including vacuum gripper beam with multiple suction cups as pictured, mounted on a CE-marked base built by Machinefabriek van de Weert (Helmond, NL). Robot specifications: * Make / model: FANUC CRX-10iA/L * Build date: 05/2021 * Payload: 10 kg * Reach: 1418 mm * Robot weight: 40 kg * Type / part no.: A05B-1702-B202 * Serial no.: R2150086C Ndjdpfx Abszq Tzasyec * Software: standard/basic configuration (no upgrades known) Base / installation (integrator): * Built by: Machinefabriek van de Weert – Helmond b.v. (CE) * Year of building: 2021 * Power supply: 230V / 50Hz * Compressed air: 6 bar * Base weight: approx. 150 kg Included: * FANUC CRX-10iA/L robot on base * Vacuum gripper / suction cup beam (as shown) * Cabling / pneumatics as installed * Control/electrics integrated in the system / complete as installed Condition: * Very low use, stored since 2021/2022 * Cosmetic dust/storage marks visible (see photos) * Inspection possible at our warehouse Location & delivery: * Location: Son (near Eindhoven), The Netherlands * Loading available Fixed quick-sale price: € 27,500.- excl. VAT, ex works Son (NL) Contact: Walther van Rooij – Machinehandel van Rooij BV (The Netherlands) Mobile/WhatsApp: E-mail:

Condition: good (used), Year of construction: 2005, €9,900 net Still R08-20 electric tow tractor Year of manufacture (machine): 2005 Operating hours: 5,519 h Year of manufacture (battery): 2026, fully refurbished; 90% remaining capacity Battery capacity: 320 Ah at 80 volts Payload: 2,000 kg Towing capacity: 6,000 kg Maximum speed: 20 km/h Dimensions of loading platform: 1,300 mm wide; 2,400 mm long; space for a total of 3 pallets Weight: 3,000 kg including battery Detailed technical specifications can be found here: ?mod=1535447206&s=80a07869f509d6927505e84cca836ead - Enclosed cab with sliding windows - Power steering - Suspension - Heater - Road traffic regulations compliant lighting - Windscreen wiper Including charger Extremely maneuverable and very pleasant to drive The machine is in perfect working order and is immediately ready for use. Njdpsy Rh Uwofx Abysdc Affordable delivery by a specialist company is possible. Also, check out our other listings. We constantly have many more high-lift trucks and forklifts in stock. Do you need spare parts for your forklift, high-lift truck, etc.? Just contact us. Don’t see the right machine? Just send us an email with your requirements, and we’ll see if we can find the right one for you. ID: 50-280127300150

Condition: used, machine/vehicle number: 0801674635, color: other, Year of manufacture: Jan 2020 Year of construction: 2020 Njdpfxowur Ehe Abyedc 4 PIECES THE SAME LIKE NEW FROM 0 TO 200 HOURS.

Condition: good (used), Year of construction: 2016, functionality: fully functional, load capacity: 2,000 kg, total height: 1,450 mm, total length: 1,925 mm, total width: 1,400 mm, rotary table diameter: 800 mm, overall weight: 1,100 kg, height adjustment type: hydraulic, table load: 2,000 kg, product height (max.): 1,350 mm, workpiece weight (max.): 2,000 kg, Equipment: documentation/manual, foot remote control, Max. capacity: 2000 kg Nedpfxez H Nufj Abyjdc Table LxW: 800 x 800 mm Table rotation speed: 1.2–1.8 rpm Max. height with vertical table: 1350 mm Featured with: - Manual controll - Footpedals - User Manuals Country of origin: Spain Motor power: 4 kW Machine (L×W×H): 1925 × 1400 × 1450 mm Machine weight: 1100 kg

Condition: used, Year of construction: 2013, functionality: fully functional, load capacity: 1,000 kg, total height: 850 mm, total length: 2,000 mm, total width: 1,100 mm, rotary table diameter: 900 mm, overall weight: 1,100 kg, height adjustment type: hydraulic, table load: 1,000 kg, disc diameter: 900 mm, product height (max.): 1,350 mm, faceplate diameter: 900 mm, workpiece weight (max.): 1,000 kg, plate diameter: 900 mm, Equipment: foot remote control, Max load: 1000 kg Table size: Ø900 mm Max. height with vertical table: 1350 mm to middle of table Ndodsz H Npiepfx Abysc Rotation speed: 0.1 - 1.2 rpm Featured with: Wired remote control Country of origin: The Netherlands Motor power: 0,75 kW Machine (L×W×H): 200 x 110 x 85 cm Machine weight: 1100 kg

Condition: used, The Nagema FBFC/1 is a heavy-duty, industrial Continuous Butter Making Machine (CBM) engineered for the commercial dairy sector. Manufactured by the historic German engineering brand Nagema, this machine processes bulk cream into high-quality butter via a fully continuous automated cycle. A detailed technical breakdown of the machine's specifications and functional systems is outlined below. ----- Technical Specifications - Production Capacity: Up to 2,500 kg/h of finished butter output. - Raw Material Suitability:Sweet / Cultured Cream: 45% to 50% fat content. - Sour Cream: 38% to 42% fat content. - Dimensions: Approx. 390 cm (Length) × 100 cm (Width) × 255 cm (Height). - Total Machine Weight: Approx. 3,100 kg. - Main Drive Motor (Beater): 22 kW to 30 kW operating at 650 to 1,950 rpm (manually adjustable via an external handwheel or modernized variable frequency inverter). - Auxiliary Drives:Auger feeder motor: 0.4 kW (925 rpm). - Raw material pump engine: 1.1 kW (2,760 rpm). - Water pump motor: 1.1 kW (2,760 rpm). - Integrated Centrifugal Pumps: 2x Nagema pumps with a maximum capacity of 13 m³/h. - Electrical Parameters: 380V / 50Hz, 3-phase power supply. ----- Structural Design & Materials Nsdpjz S Ni Ujfx Abyodc - Hygienic Construction: All areas that come into contact with the product are made entirely of premium stainless chromium-nickel steel to satisfy strict food safety regulations. - Frame: Heavily reinforced painted steel, cladded completely with a stainless steel outer shell. - Controls: Simple, user-friendly control interface deployed directly on the machine body. Modernized variations often feature integrated variable frequency drives (VFD/Inverters) for smooth, digital speed management of the main churning drum. ----- Step-by-Step Functional Sections The FBFC/1 achieves continuous production by arranging its mechanical processes sequentially within its horizontal frame: [[1]()] - The Churning Cylinder (Beater): Cream is continuously pumped into the front end of a cooling-jacketed cylinder. Inside, the high-speed rotating beater strikes the cream forcefully. This mechanical action rapidly disrupts the fat globule membranes, reversing the emulsion to separate raw butter grains from liquid buttermilk. - Separation and Additional Churning: The resulting mix moves into a designated separation block. The buttermilk is systematically drained and collected by integrated centrifugal pumps, leaving behind a concentrated formation of pure butter granules. - The Kneading Zone: Dual counter-rotating augers push the raw butter grains forward. This mechanical kneading forces out remaining pockets of buttermilk moisture, tightly binds the butter matrix, and distributes water particles evenly. This process ensures the exact moisture profile (ranging from 16% to 25% based on settings) before the final product exits the machine. - Outfeed Distribution: The dense, finished butter is continuously extruded from the mouthpiece, frequently feeding directly into bulk packing systems or automatic wrapping machines. Technical Data & Specifications - Machine Type: Semi-automatic auger-fed system - Maximum Output: Up to 150 to 151 cartons per hour (depending on operator speed) - Product...

Condition: used, Pastochef Range Electrical power Power supply 400 V / 50 Hz / 3 phases Rated power 2 kW Ndjdpozx Un Rofx Abyjc Fuse 10 A Crème Excellent: 6 to 15 kg per cycle Bavarian cream: 7 to 17 kg per cycle Fruit jam: 6 to 12 kg per cycle Chocolate tempering: 5 to 15 kg per cycle Ganache cream: 3 to 15 kg per cycle Choux pastry: 6 to 15 kg per cycle 46 dedicated programs and 5 free programs Dry bain-marie for heating and cooling Variable speed via inverter Display guiding through steps and temperatures Removable paddle and agitator scrapers Double lid with large hopper 3-position tap with double safety 4-position stainless steel shelf Management of power and water outages Rounded safety corners Cleaning by heating the cylinder Drying program after washing Dimensions 450 × 614 × 1110 mm Net weight 150 kg Air condenser available at extra cost Multifunction cooking machine Pastochef 18 RTL-I – up to 17 kg per cycle General description The Pastochef 18 RTL-I is a professional, multifunction cooking machine designed to automate numerous preparations in pastry, chocolate, ice cream, and gastronomy. It combines cooking, cooling, mixing, pasteurization, and preservation according to the selected programs. Each cycle guides the operator through the various steps, displaying temperatures and providing instructions for the gradual introduction of ingredients. Its capacity depends directly on the recipe being used, for example, 6 to 15 kg of Crème Excellent and up to 17 kg of Bavarian cream per cycle. What sets this model apart The Pastochef 18 RTL-I uses a dry bain-marie heating and cooling system, developed to limit the formation of deposits on the cylinder surfaces and maintain a consistent heat exchange. The inverter allows the stirring speed to be adapted to the preparation. The scrapers and removable paddle generate a vertical and horizontal helical movement to promote thorough mixing during the process. The machine has 18 pastry programs, 9 chocolate programs, 8 specialty programs, 7 gastronomy programs, 4 ice cream programs, and 5 free programs for recording custom cycles.

Condition: excellent (used), Year of construction: 2017, Maximum operating pressure PS: -10 bar Test pressure PT: 18.5 bar Ndsdjz Nwhmspfx Abyec Maximum operating temperature TS: 184 degrees Steam output m: 800 kg/h Total capacity V: 1108 L The unit was used for only 3 years and remained unused for the rest of the time. Loading is free of charge. Please see my other listings.

Condition: good (used), operating hours: 2,541 h, lifting height: 8,800 mm, fuel type: electric, mast type: triplex, battery manufacturer: Batterie Siems, battery capacity: 620 Ah, battery voltage: 48 V, fork length: 1,200 mm, General information Year of manufacture: 2008 Year of construction: 2008 Weights Empty weight: 3.590 kg Battery Battery: 620 Ah, 48 V, Year of manufacture 2017, Brand of battery Batterie Siems Functional Lifting capacity: 1.700 kg Maximum passing height: 340 cm Number of valves: 3 Ndjdsz I Airepfx Abyec Condition Technical condition: good Visual appearance: good Other information Mast type: triplex = Additional options and accessories = - 3rd valve - Battery charger = Remarks = = Additional options and accessories = - 4th valve - Pneumatic shaped solids = More information = Number of valves: 3 Fork carriage: Sideshifter Please contact Bas Sindorf , ) for more information

Condition: good (used), axle configuration: 1 axle, permissible axle load (axle 1): 10,000 kg, first registration: 12/2012, loading space length: 10,600 mm, loading space width: 2,480 mm, loading space height: 2,620 mm, total length: 10,890 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 275 / 70 / R22.5, wheelbase: 7,060 mm, color: green, Equipment: tail-lift, Axle configuration Tyre size: 275 / 70 / R22.5 Make axles: SAF Brakes: disc brakes Ndsdjz R Nb Nopfx Abyjc Suspension: air suspension Rear axle: Double wheels; Max. axle load: 10000 kg; Steering; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30% Weights Empty weight: 6.880 kg Carrying capacity: 15.120 kg GVW: 22.000 kg Functional Tail lift: Dhollandia DHLSU.40, tail lift, 2000 kg Make of bodywork: Groenewegen Jumbo Plywood Box Maintenance, history and condition Number of owners: 1 APK (MOT): tested until 12/2026 Technical condition: good Visual appearance: good Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: good (used), axle configuration: 1 axle, permissible axle load (axle 1): 10,000 kg, first registration: 12/2012, total length: 10,890 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 275 / 70 / R22.5, wheelbase: 7,060 mm, color: green, Equipment: tail-lift, Axle configuration Tyre size: 275 / 70 / R22.5 Make axles: SAF Brakes: disc brakes Suspension: air suspension Rear axle: Double wheels; Max. axle load: 10000 kg; Steering; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30% Weights Empty weight: 6.880 kg Ndsdpsz R Ncaefx Abyjc Carrying capacity: 15.120 kg GVW: 22.000 kg Functional Tail lift: Dhollandia DHLSU.40, tail lift, 2000 kg Maintenance, history and condition Number of owners: 1 Technical condition: average Visual appearance: good Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: excellent (used), mileage: 373,826 km, power: 221 kW (300.48 HP), first registration: 08/2008, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro5, number of seats: 2, loading space length: 8,600 mm, loading space width: 2,500 mm, loading space height: 2,450 mm, Equipment: ABS, central locking, electric window regulation, fog lights, power mirror, spoiler, tail-lift, = Additional options and accessories = - Aluminum fuel tank - Front fog lights - Radio - Roof Spoiler - Side door - Sun visor = Remarks = Tailgate Plateau length: 225 cm = More information = General information Ndodpoz S Uh Njfx Abyjc Number of doors: 2 Year of construction: 2008 Cab: single Registration number: 2GKZ281 Technical information Engine capacity: 6.700 cc Front axle: Steering Rear axle: Double wheels Weights Empty weight: 9.680 kg Carrying capacity: 9.320 kg GVW: 19.000 kg Functional Tail lift: dhollandia DHLSU 11, tail lift, 2500 kg Maintenance, history and condition APK (MOT): tested until 02/2027 Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, functionality: limited functionality, Year of construction: 2008, total length: 22,000 mm, total width: 10,000 mm, load capacity: 2,000 kg, Abus crane with track system. The crane has a span of approximately 10 meters between centers. The structure features 2 bridge sections, each capable of lifting 1000 kg. The track length is approximately 22 meters. Sold without warranty or guarantee. Ndodjz Ixgtspfx Abyoc

Condition: used, axle configuration: 3 axles, first registration: 11/2018, color: other, Year of construction: 2018 Empty weight: 9.880 kg Axle 1: left 6 mm right 6 mm Axle 2: left 12mm right 12mm Ndodsydmgqjpfx Abysc Axle 3: left 8 mm right 8 mm

Condition: used, Year of construction: 2013, * Kock & Sohn KGS 2600 XL silage grab bucket * Year of manufacture: 11/2013 * Weight: 1,060 kg -----Internal vehicle number: 8885----Subject to errors & prior sale. WhatsApp support available! Nodpfx Asrvf Skjbysdc If you have any questions about the machine or need further information, feel free to contact us conveniently via WhatsApp. WhatsApp WhatsApp

Condition: ready for operation (used), Year of construction: 2021, machine/vehicle number: 23.004, functionality: fully functional, cutting height (max.): 2,100 mm, cutting width (max.): 5,300 mm, saw blade diameter: 250 mm, overall weight: 1,000 kg, TECHNICAL DETAILS Max. vertical cutting height: 2,200 mm Max. horizontal cutting height: 2,100 mm Max. cutting width: 5,300 mm Max. cutting depth: 80 mm Horizontal cutting: Yes Vertical cutting: Yes Min. saw blade diameter: 250 mm Max. saw blade diameter: 250 mm Saw blade arbor: 30 mm MACHINE DETAILS Voltage: 400 V Current draw: 14 A Fuse rating: 16 A Power: 6.5 kW Dimensions & Weight Dimensions (L x W x H): 6,300 x 1,600 x 2,950 mm Weight: 1,000 kg Nsdpozxcnlsfx Abyodc Shipping packages: 2 pcs.

Condition: good (used), operating hours: 386 h, lifting height: 3,400 mm, fuel type: electric, mast type: duplex, fork length: 1,200 mm, Year of manufacture: 2018 Year of construction: 2018 Empty weight: 1.581 kg Ndjdpfx Aboz I A Stjyoc Lifting capacity: 1.500 kg CE mark: yes Technical condition: good Visual appearance: good Mast type: duplex = Additional options and accessories = - Battery charger = Remarks = Please contact Bas Sindorf , ) for more information

Condition: good (used), operating hours: 7,903 h, lifting height: 3,330 mm, fuel type: gas, mast type: duplex, power: 33 kW (44.87 HP), fork length: 1,200 mm, Year of manufacture: 2016 Year of construction: 2016 Empty weight: 2.290 kg Lifting capacity: 1.600 kg Number of valves: 3 CE mark: yes Technical condition: good Visual appearance: good Mast type: duplex = Additional options and accessories = - 3rd valve Njdpjz I Ai Sjfx Abyedc = Remarks = = Additional options and accessories = - Pneumatic shaped solids - Roof window = More information = Make of engine: PSI Number of valves: 3 Number of owners: 1 Fork carriage: Sideshifter Please contact Bas Sindorf , ) for more information

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 08/2015, total length: 13,660 mm, total width: 2,470 mm, suspension: air, tire size: 385/55R22.5, wheelbase: 8,810 mm, color: blue, General information Year of construction: 2015 Registration number: ON-64-VV Axle configuration Tyre size: 385/55R22.5 Make axles: Valx Brakes: drum brakes Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 3.800 kg Carrying capacity: 37.200 kg GVW: 41.000 kg Condition Technical condition: good Visual appearance: good Additional information Please contact Arie or Pedro for more information = Additional options and accessories = - Air suspension Ndjdpezzxx Sjfx Abyoc - EBS - Twist-locks = Remarks = 45 FT Only. Empty Weight: 3.800 KG!