Used Centricator for sale (57)

Condition: good (used), centric clamping machine vice Iedpfx Ajh Nx Rtsmistg 200mm jaw width max. 320mm clamping with 360° rotating plate exchangeable clamping jaws body height 105mm- total height ca.175mm width x length approx. 660x500mm

Condition: good (used), Year of construction: 2020, machine/vehicle number: 164390-0000-Z2724, Offer 24059 Technical data: - Jaw design stepped jaws - Jaw width 125 mm - Jaw height 40 mm Itodpfx Aorwmkajmisg - Clamping width 1 0 - 216 mm - Clamping width 2 97 - 312 mm - Clamping force 40 kN - Total height 140 mm - Weight 33 kg - Min. Space requirement L 463 x W 126 x H 145 mm

Condition: good (used), Manufacturer: AXA Type: HFB 600 Control system: Siemens 840D Solutione Line Year of construction: 2015 Specifications: Metric Metric US Standard There are no specifications for this machine (yet). Dimensions (estimate) length 7800 mm width 2300 mm height 2250 mm weight Isdpfx Amjt Tdp Tsiotg 15000 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details. Finishing of sealing surfaces The finishing of the sealing surfaces of the approx. 17m long tubes is done by an NC-controlled feed unit and an NC-controlled facing slide with 2 ABS tool holders for either lathe tools, measuring sensors or measuring probes. The work piece is first measured via the measuring sensors in the slide heads and aligned by the adjustable roller supports. The tube is hydraulically tightened into position by the swimming jaw once it lies at a right angle and centric to the facing slide head. The interchangeable measuring sensors calculate how to process the surface whic

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: Heidenhain, controller model: TNC640, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, MULTIMILL 1000 by EDEL Werkzeugmaschinen GmbH New-machine quality at a price that takes the pressure off your costing. The MULTIMILL 1000 is a 5-axis all-rounder with turning capability, mastering milling and turning in a single setup. Proven EDEL technology, combined with our complete factory refit procedure: every assembly overhauled, all wear parts renewed, fully measured and backed by factory warranty. Technical specifications: 1 5-axis milling machine EDEL MM1000 X/Y/Z: 1,000/800/700 mm 1 NC universal milling head M21 B-axis, (-)10° to (+)187°, 900/1,680/4,000 Nm, 330°/s, (55 rpm) 1 Milling spindle CS-21-180-A 21/32 kW, 100/130 Nm, 18,000 rpm, HSK-A63 1 NC rotary table CRT/1000/H/HT 960/2,048/4,000 Nm, 570°/s, (95 rpm), 20,000 N (centric) Face plate diameter: 900 mm 1 Heidenhain TNC 640 5-axis contouring control electronic handwheel HR 510 DXF converter CAD viewer KinematicsOPT enhanced energy efficiency 1 Remote service 1 Extraction unit for oil and emulsion mist filter systems, capacity approx. 2,000 m³/h cascaded filtration 1 Coolant/lubricant system 950 litre tank capacity External coolant supply: 30 l/min / 20 bar Through-spindle coolant: 20 l/min / 50 bar Wash-down gun: 40 l/min / 2 bar 1 Workpiece measuring system Touch probe BLUM TC 60 BRC radio technology Ijdpfx Aopiqzkjmiotg 1 Tool changer HSK-A63 / 52 pockets Tool diameter 75/130 mm Tool length 300 mm Tool weight 8 kg 1 Chip conveyor Hinge belt / scraper belt conveyor 1 Switchable external air cooling (coolant / air) Coolant: 20 bar / Air: 6 bar 1 Turning technology package Machine control Heidenhain TNC 640 Rotary table CRT/1000/H/HS Tool interface HSK-A 63 Spindle clamping device Tool measuring system for turning tools 1 Switchable internal through-spindle cooling (coolant / air) Coolant: 50 bar / Air: 6 bar 1 Tool changer HSK-A63 / 80 pockets INSPECTION AND DEMONSTRATION AVAILABLE AT ANY TIME Arrange an appointment at our plant, and we will show you the machine in live cutting operation.

Condition: used, Year of construction: 2022, Used Flash Pasteurizer UDMACHINES Year 2022 Introduction To begin with, the Used Flash Pasteurizer UDMACHINES Year 2022 emerges as a cutting-edge solution in the liquid thermal treatment sector. This machine, meticulously designed by UDMACHINES, is a model PAS-10000-45-2P-E. It’s distinguished by its operational efficiency and precision, setting a new standard in the industry. Key Characteristics UDMACHINES, known for their innovation, manufactured this “Used Flash Pasteurizer” in 2022, making it a relatively new addition to the market. Importantly, it boasts a remarkable operational capacity of 10,000 liters per hour. This capacity is a testament to its significant efficiency, especially in handling large volumes for treatment. Pasteurization Method and Functional Aspects This pasteurizer operates using the flash method, a critical feature. Specifically, it rapidly heats liquids to 90 °C. This process is not only swift but also ensures the effective thermal treatment of the liquid. Moreover, it does so while maintaining the original organoleptic properties of the product, a vital aspect for quality preservation. Current State and Safety Features Currently, the “Used Flash Pasteurizer UDMACHINES” is in storage, a crucial factor for its preservation. This storage condition is ideal for keeping the machine in an excellent state, ready for its next operational cycle. Additionally, the machine is equipped with comprehensive safety features. These features are paramount, ensuring safe and reliable operation, a necessity in today’s stringent industrial environments. Manuals and Maintenance Furthermore, the availability of complete and detailed manuals is a significant advantage. These manuals provide extensive instructions on both operation and maintenance. This availability ensures that operators can fully understand and efficiently manage the machine’s functionalities. Also, it underscores the importance of regular maintenance for optimal performance. Technical Specifications Delving deeper into its specifications, the machine’s design is both robust and user-friendly. It features user-centric controls and interfaces, simplifying the operational process. Additionally, the construction materials are of high quality, ensuring durability and longevity. Ijdpfx Amovgt S Ioijtg Industry Applications and Versatility The Used Flash Pasteurizer UDMACHINES Year 2022 is incredibly versatile, suitable for various industries. From beverage production to dairy processing, this machine can adapt to different liquid types and processing requirements. This versatility makes it a valuable asset for diverse processing plants. Energy Efficiency and Environmental Considerations Equally important, the machine is designed with energy efficiency in mind. This efficiency reduces operational costs and aligns with environmental sustainability goals.

Condition: like new (used), Year of construction: 2008, operating hours: 61,300 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 35 mm, clearance between the columns: 470 mm, pressure: 2,429 bar, Here we are offering the following well-maintained used injection moulding machine as part of our injection moulding machinery trading business. Of course, we are also actively purchasing well-maintained injection moulding machines from model year 2010 onward. We have been a wholesale dealer of injection moulding machines for over 25 years. ++++From Pharmaceutical Cleanroom Production++++ Manufacturer: KraussMaffei Machine type: KM 120-380 EX International size designation: 380 EX / 120 Machine no.: 61011287 Year of manufacture: 2008 Machine hours: 61,300 h Control system: MC5 Technical data - Clamping unit Clamping force: 1,200 kN Tie bar spacing H x V: 470 x 470 mm Platen size H x V: 780 x 735 mm Min. mould height: 200 mm Max. mould height: 450 mm Max. platen distance: 850 mm Opening stroke: 400 mm Ejector stroke: 150 mm Ejector force: 22 kN Centric ring for moving platen D: 160 mm Centric ring for fixed platen D: 125 mm Mould weight: 1,485 kg Technical data - Injection unit Screw diameter: 35 mm Stroke volume: 156 ccm Injection pressure: 2,429 bar Screw length: 23 l/d Screw speed: 289 rpm Plasticising rate: 27 g/s PS Free shot weight: 477 g/s PS Number of heating zones: 5 Dimensions & Weight Machine dimensions LxWxH: 6 m x 1.7 m x 2.19 m Total weight: 9,700 kg Equipment Display language German Display language English +++Extras++++ Automation: Handling unit / extraction robot included – Handling: LR 100-2300 Conveying equipment: roller conveyor included CE marking: available Complete maintenance and inspection history Full latest test report Incl. conveyor belt, incl. cage Machine with water battery Machine without material hopper Levelling elements EUROMAP 12 interface Electrics Schuko socket 10A CEE socket 16A Voltage: 400 V Iodpfx Amey D Adtjiotg Frequency: 50 Hz Motor current: 80 A Warranty Warranty up to first commissioning Loading / Shipping Free loading onto buyer's truck or free delivery within Germany subject to freight reimbursement Available ex stock Hanover, Germany

Condition: used, This listing is for the Semper Safehood 120 The unit is in full working condition and is ready for immediate uses Iedpfx Amjyu T H Ssietg Dimensions 1200mm L x 710mm D x 1200mm Ht The Semper Safehood 120 is a robust and reliable safety cabinet engineered to provide a secure environment for handling hazardous chemicals, powders, and biological agents. Combining high-efficiency filtration with ergonomic design, the Safehood series is a staple for laboratories prioritizing operator safety without compromising on workflow efficiency. Key Features & Benefits: Advanced Containment: Specifically designed to capture and filter harmful vapors and aerosols, keeping the breathing zone of the operator clear and safe. Optimal Visibility: Features large transparent side panels and a clear front sash, ensuring the user has a full, unobstructed view of their delicate work. User-Centric Ergonomics: The spacious 120cm internal width provides ample room for equipment, while the low-noise operation reduces fatigue during extended use. Easy Maintenance: Built with smooth, chemically resistant surfaces that allow for rapid decontamination and easy cleaning between different applications. Reliable Monitoring: Includes built-in safety alarms and airflow monitoring to ensure the unit is always performing at peak protective levels.

Condition: new, Year of construction: 2025, Technical Data / Equipment Straightener: R65/360 • Strip width 30 - 360 mm • Strip thickness from-to 0.6 - 4.0 mm • Strip thickness throughput: max. 4.00 mm • Max. straightening cross-section: 800 mm2 at R02=350 Nmm2 or 150 x 4 mm • Straightening speed: 2 - 20 m/min • Number of straightening rollers: 7 • Straightening roller diameter: 65 mm • Number of draw rollers: 2 • Draw roller diameter: 65 mm • Motor power: 2.2 kW/3x400V RK machine body with a very stable and torsion-free welded construction RZ straightening and draw rollers, made of high-quality steel, surface-hardened and finely ground mounted in maintenance-free roller bearings Ijdpfowhfxzjx Amiotg AG drive, via spur gear motor with Double chain drive EM self-regulating drive, via frequency converter, with WM position measuring system, belt loop control for self-regulating drive, with ultrasonic sensor and sensor in the belt loop RZ straightening roller adjustment, individually manually adjustable and readable via dial gauges RO discharge roller cage, fixed with a radius for 3 mm material thickness PZ pneumatic tension roller adjustment, operated from the control panel BSF-ze belt side guide, manually adjustable centrically and eccentrically by 25 mm SS-2 interface to the press:

Year of construction: 2020, condition: as good as new (ex-display), 1x drive unit with trolley 1x travelling unit with trolley and height adjustment -Centric roller block adjustment with hand crank. -Manual height adjustment, locking with socket pin - height difference 0-350 mm adjustable - Load capacity: 2.500 kg / unit - Component diameter: 200mm - 2.000mm - Rollers: PUR wheels - dim. length/width: approx. 1.900mm x 460mm - Chassis track width: 1435mm Itsdefxgrdspfx Amisg - turning speed: 0 - 2,000 mm/min - Operation: hand remote control and foot switch

Condition: used, Slotting head for milling machine, milling head, CCCP / UDSSR STANKO type 1502 No: 200 Year of manufacture 1974 Stroke size: max. 60 mm Stroke rate: approx. 200 - 500 strokes/min. Tool holder: 12 x 17 mm with clamping plate Hole spacing machine flange plate: 245 x 185 mm Mounting hole: Ø 17 mm Centering diameter on the machine flange plate: 190 mm - Stroke size adjustable via eccentric adjustment - The drive is like the normal vertical head from the machine gearbox - Drive via driver, centric in the centering diameter - Degree scaling on the flange plate +/- 45° steplessly pivotable Iedpjd Dk A Aefx Amijtg - This grooving head is flange-mounted in place of the normal vertical milling head (mounting in place of the vertical milling head, milling head) Weight: 42 kg good condition Slotting head bearing number 58166 and vertical milling head bearing number 58164 from identical STANKO milling machine.

Condition: ready for operation (used), functionality: fully functional, overall weight: 30 kg, 2 sets of hard reversible top jaws for RÖHM power chucks (centrically clamping) 2 sets of soft top jaws for RÖHM base jaws Mounting on base jaws for the following chuck types (base jaws available on request): For chuck types: RÖHM ZGU 500, 630, 700 RÖHM ZSU 500, 630, 700 UGU 500, 560, 600, 630, 710 USU 500, 560, 600, 630, 710 ---- Dimensions: hAB = hard top jaws = width B = 63mm wAB = soft top jaws = width B = 50mm ---- 2 mounting holes ø 20mm Bolt spacing 76mm Longitudinal keyway jaw 12.7mm Transverse keyway jaw 17.0mm Itedpfx Ajwu R Nrsmieg ---- Total weight approx. 40-50Kg RÖHM ZS chuck diameter: ø 500mm; ø 600mm; ø 800mm ----- Signs of use present. The jaws are cleaned, inspected, and in good condition.

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 7826-1082, Plastic Injection Moulding Machine | DEMAG Ergotech Extra 35-80 (350 - 80) Clamping force [kN]: 350 Number of components: 1 Clamping plate width [mm]: 390 Clamping plate height [mm]: 390 Clear tie bar spacing horizontal [mm]: 280 Clear tie bar spacing vertical [mm]: 280 Centric ring diameter [mm]: 110 Min. mould installation height [mm]: 180 Max. mould installation height [mm]: 350 Max. opening stroke [mm]: 350 Max. ejector stroke [mm]: 100 Thread [M]: 16 Max. mould weight [kg]: 310 Max. mould weight moving platen [kg]: 150 Screw diameter [mm]: EE1:18 Max. shot weight [g] PS: EE1:20 Ijdpfjygh Rvsx Amistg Injection unit orientation: EE1: horizontal Equipment: 2-core pull, without robot Inspection possible any time by appointment. Free loaded on truck (Butzbach). #Tags: DEMAG | Extra35 | Extra3580

Condition: used, Year of construction: 2008, roll diameter 300 mm Wheel width / mm Distance of shafts / Roller block turning device EU-RB 3000MS Gesamtabmessung: 2060x1002x555mm Adjustment of the roller brackets: manual, centric Locking: secured locking pin Weight: 750kg Max. Max. load capacity: 3000kg Itsdjt Ukxqspfx Amijg Workpiece diameter: 150 x 3000mm Roller diameter: 300mm Torque on the drive roller: 500 Nm Peripheral force on the drive roller: 3300N Feed speed: 100 - 2000 nm/min Supply voltage: 230 V/50 Hz Connected load: 2.3 kVA

Condition: used, New three-phase electric motor 37 kW three-phase motor SIEMENS Heavy-duty motor, electric motor, squirrel cage, asynchronous motor Type 1LE16032AA534GB4 Design V1 Itjdpfxoyhq Awj Amisg Frame size 200L Motor speed 2955 rpm Current draw 65 amps Motor power 37 kW Mains connection 400 Volt, 50 Hz Shaft diameter Ø 55 mm Shaft projection length 110 mm Keyway width in shaft 16 mm Flange diameter 400 mm Centric diameter 300 mm Pitch circle diameter Ø 350 mm - Flange motor with 4 mounting holes Ø 19 mm Overall housing length without shaft 640 mm Overall housing length with shaft 740 mm Required installation space (L x W x H) 740 x 400 x 520 mm Net weight 250 kg Excellent condition – new, unused from stock clearance

Condition: new, turning diameter 420 mm turning length 1500 mm swing diameter over bed slide 250 mm Swingdiameter in the bed bridge 590 mm centre height 210 mm Turning length in the bed bridge 260 mm reus 16 (45-1800) U/min tail stock MK 4 quill stroke 120 mm diameter of quill 50 mm spindle taper DIN ISO 702-2 Nr. 6 spindle bore 52 mm spindle cone MK 6 feed längs 17 / 0,05 - 1,7 m/min feed plan 17 / 0,025 - 0,85 m/min total power requirement 4,6 kW weight of the machine ca. 1340 kg dimensions of the machine ca. 2440 x 915 x 1375 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway Itodjk Egrpepfx Amijg - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in oil bath - Smooth-running gear wheels, hardened and ground with 2 adjustable Precision tapered roller bearings - Hand wheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the switching spindle - Central lubrication in bed slide - Meehanite cast base and machine bed in one piece - Lead screw cover - Emergency stop device with foot control - Safety handwheels with snap-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed andglare-free - Glass scales scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Revolving bezel passage Ø 10 - 75 mm - LED machine light - Reducing sleeve MT 6 / MT 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial filling of the machine with quality oil - Operating tool Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm Quick change holder SWH5-B set

Condition: new, turning diameter 560 mm turning length 1910 mm swing diameter over bed slide 355 mm Swingdiameter in the bed bridge 790 mm centre height 280 mm Turning length in the bed bridge 170 mm reus 12 (25-1600) U/min tail stock MK 5 quill stroke 180 mm diameter of quill 75 mm spindle taper DIN ISO 702-2 Nr. 8 spindle bore 80 mm spindle cone MK 7 feed längs 35 / 0,059 - 1,646 m/min feed plan 35 / 0,020 - 0,573 m/min total power requirement 8,5 kW weight of the machine ca. 2560 kg dimensions of the machine ca. 3450 x 1150 x 1650 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in oil bath - Smooth-running gear wheels, hardened and ground with 2 adjustable Precision tapered roller bearings - Hand wheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the switching spindle - Central lubrication in bed slide - Meehanite cast base and machine bed in one piece - Lead screw cover - Emergency stop device with foot control - Safety handwheels with snap-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed andglare-free Itsdpsucgr Iofx Amisg - Glass scales scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Revolving bezel passage Ø 10 - 75 mm - LED machine light - Reducing sleeve MT 6 / MT 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial filling of the machine with quality oil - Operating tool Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm Quick change holder SWH5-B set

Condition: used, Hydraulic Horizontal Straightening Press, Horizontal Press STENHOJ Type 40 Horizontal hydraulic press for straightening work on steel beams or welded structures Serial no. 42615 Year of manufacture: 1984 Refurbished in 2025 Pressing force: 40 tons Ram stroke: 300 mm Piston rod diameter: 80 mm Working height: 780 mm (floor to center of piston rod) Table size without pressure pads: approx. 1000 x 290 mm Installation dimension, ram + press block to counter bearing: 260 mm (with pressure pads on ram and counter bearing) Installation dimension, ram without press block to counter bearing: 440 mm (without pressure pads on counter bearing) Height of the two adjustable pressure pads: 130 mm Pressure pad width: 220 mm Advance speed: 10 mm/s Return speed: 20 mm/s Hydraulic tank capacity: approx. 60 liters Motor power: 3 kW Power supply: 400 Volt, 50 Hz - Cylinder stroke operated manually via an actuation lever, sensitive control via mechanical control valve - Pressing force readable via pressure gauge - Ram stroke position with actual value display, digitally readable, ideal for precise repeatability of pressure points during straightening - 2 adjustable counter bearings via threaded spindle (centric parallel adjustment from 290 to 890 mm) - Straightening tools with rounded pressure faces - Infeed rollers for material support, centrally height-adjustable via handwheel (roller width = 250 mm) Required space (L x W x H): 170 x 140 x 100 cm Isdpfx Aeydqd Hsmijtg Weight: 1250 kg In excellent condition

Condition: used, Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 250 mm -centrically exciting: -Weight: 35 kg Itedpfx Amjdu Uffeiog

Condition: used, Machine vise, sturdy vise, drill vise -Jaw width: 160 x 45 mm -Clamping depth: max. 260 mm -Tension: centric -Dimensions: 590/200/H125 mm -Weight: 36 kg Ijdpfxjfxg N Ue Amijtg

Condition: used, Machine vice, stable vice, drill vice -Back width: 110 x 30 mm -Tension depth: max 132 mm -Tension: centric -Dimensions: 345/135/H95 mm -Weight: 11.7 kg Iedpod Aghaofx Amietg

Condition: used, Two-jaw chuck, 2 jaw chucks, vice, face plate -centric: exciting -Chuck size: Ø 242 mm -Rezess: Ø 190 mm -Hole circle: Ø 215 mm Itjdpfx Amschyydsieg -Weight: 26.4 kg

Condition: good (used), Machine vice, sturdy vice, drill press vice -Jaw width: 215 x 40 mm Ijdpfxsfxg Nfo Amietg -Clamping depth: max. 240 mm -Tension: centric -Dimensions: 460/280/H135 mm -Weight: 35 kg

Condition: good (used), Machine vice, sturdy vice, drill press vice -Jaw width: 150 x 60 mm -Clamping depth: max. 285 mm -centric clamping -Dimensions: 620/275/H135 mm -Weight: 41 kg Isdpfx Amed Ehfzjistg

Condition: new, Year of construction: 2026, OPTIturn TU 2004V - Lathe with infinitely variable speed control and digital speed display Picture shows OPTIturn TU 2004V Lathe with infinitely variable speed control and digital speed display Precise processing Heavily ribbed prismatic bed made of cast steel, inductively hardened and precision ground Hardened and ground bed guideways Hardened spindle nose (DIN 6350) Guaranteed concentricity of the spindle nose better than 0.009 mm Automatic length/lead spindle drive With longitudinal, cross and top slide Right-/left-handed rotation switchable in the control panel Emergency-stop pushbutton Rotary chuck protection Thrust bearing Lead screw mounted in two sintered bearings Large thread cutting range due to change gear set Simple and fast speed change via V-belt Change gearbox EMV filter class B (use in private households) Equipment details: Digital speed display Easy to read digital speed display Chip protection on the top slide Quadruple steel holder Iedpfjcnxrcox Amijtg rotatable Roll rolled trapezoidal threads Lead screw Tailstock Adjustable for taper turning Tailstock quill and handwheel with adjustable fine scaling 0.02 mm Main spindle Hardened and mounted in adjustable precision taper roller bearings Tapered roller bearings in P5 quality Cylindrical centering seat Hardened spindle nose with Ø 21 mm spindle bore Lathe chuck Concentricity better than 0,04 mm Scope of delivery: Three-jaw chuck Ø 100 mm centric clamping

Condition: good (used), Two-jaw chuck, 2-jaw chuck, vise, faceplate -Clamping angle: 200 x 200 mm -centrically exciting Itedpfx Amob A Ig Aoiog -Mouth size: Ø 200 mm -Weight: 30 kg