Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 081263, Connection value: 380V, 1.85kW, 4.8A Length of pressure bar: 3100 mm Pneumatic material clamping with manual lever valve Chassis Fjdpfxsh U Dbrj Akksgd Stop guide, 520 mm long 6x support brackets

Condition: reconditioned (used), Year of construction: 1987, machine/vehicle number: 1277/8-71, functionality: fully functional, Connected load: 380V, 7A Cutting length: 4300 mm Cutting height: 1925 mm Frame height: 2210 mm Machine height: 2500 mm Room height: 2540 mm Edge trimming height: 1870 mm Fgjdpfxoh U Sqrj Akked Passage height: 1940 mm

Condition: reconditioned (used), Year of construction: 1982, machine/vehicle number: 270018, functionality: fully functional, Rated voltage 380V, 6.6A, 3kW Band saw blade length 5110 mm Fence Dust extraction port 100 mm Machine table, swiveling with handwheel Foot brake Fjdjh Uxq Tspfx Akkogd

Condition: new, Year of construction: 2024, machine/vehicle number: 2024/121/47, functionality: fully functional, saw blade diameter: 420 mm, GRAULE cross-cut and mitre saw Type ZS 170 N (tiltable) 400 Volt three-phase brake motor 2.2 kW Saw blade diameter 420 mm Saw blade holder 40 mm Cutting height 170 mm, Saw blade tilted to 45°: cutting height 115 mm, cutting length 410 mm incl. the following accessories: 1 pc. Machine can be tilted by hand crank from the rear on both sides from 90° to the left by 45° and to the right by approx. 30° to approx. 60° 1 pc. Carbide circular saw blade 420x3.4/2.4x30 mm 48 WZ neg. for wood 1 pc. Machine stand Fgsdpfx Aketwz Tlsksd

Condition: ready for operation (used), Year of construction: 1987, machine/vehicle number: 402, functionality: fully functional, cutting height (max.): 70 mm, cutting width (max.): 3,200 mm, saw blade diameter: 300 mm, cutting length (max.): 3,200 mm, cutting height with scoring (max.): 70 mm, Equipment: scorer, Cutting length: 3200 mm Cutting width: 3200 mm Width stop: Gear motor adjustment Main saw unit: saw blade Ø 300, Ø 30, Z=60, SH 70 Scoring unit: yes - saw blade Ø 125, Ø 20, Z=24 Softforming unit: no Side pressure unit: yes - Version: FR 50/100 Residual cutting device: yes - Pressure beam recess Veneer cutting device: yes Trimming device: yes - Spacing: 145/525/1790 Support table front: 400 x 1400 mm - 2 pieces Rear support table: 240 x 2960 mm - 1 piece Support bars rear: 40 x 2960 mm - 5 pieces Angled table: 480 x 1400 mm left Angle ruler: with pull-out Collets: 4 pieces - floating - distance 70/400/1600/2800 Stop jaw: 2 pieces - rigid - distance 1000/2200 additional foot at the rear : no - 3 feet safety guard: yes foot switch : no Machine cuts from: left to right unit can emerge in any area: no automatic lowering with saw overtravel: no 3-step cutting height adjustment: no Main circular saw: 7.5 kW, 380 V, 2870 rpm, 50 Hz Fjdpfx Aevi H Diekkogd Scoring saw: 1.1 kW, 380 V, 2800 rpm, 50 Hz Width stop adjustment motor with torque compensation: fine input motor: 0.12 kW, 380 V, 1380 /min, main motor: 0.35 kW, 380 V, 1350n.

Condition: ready for operation (used), Connection voltage 380V Main motor 7.5kW Scoring unit 0.75kW Variable drive Double roller carriage 3000mm Electric height and tilt adjustment Cutting width 1000mm, CNC controlled Clamping system AKE Saw blade diameter max. 500 mm Control panel at eye level Swiveling front table Template holder 2-axis scoring unit Table extension 840mm Angle fence PQS Standard PSV with narrow and wide hood Fgsdpfx Asy Hq N Aekkod

Condition: used, Year of construction: 2016, operating hours: 3,625 h, total length: 13,600 mm, total width: 2,450 mm, total height: 2,450 mm, Colour: Grey Weight: 7.200 kg Price: On request - Year: 2016 - Documentation available: No - CE certificate present: No - Operating hours: 3625 - Max. cutting length [mm]: 1600 - Max. cutting width [mm]: 4300 - Transport dimensions: 13600mm x 2450mm x 2450mm (l x w x h) - Transport weight [kg]: 7200kg - Transport packages [pcs.]: 8 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Fgodpex R A Ufsfx Akksd Glenn Smeets

Condition: used, Year of construction: 1999, functionality: fully functional, empty load weight: 1,085 kg, load capacity: 2,900 kg, opening width: 2,100 mm, Rotating fork clamp Load center: 340 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: very good Fodpfxoy T Szms Akkogd Description: Kaup attachment, rotating fork clamp 4T453, year of manufacture: 1999, load capacity: 2900 kg at 500 mm, fully functional! Max. opening width: 2100 mm, width of clamp arms: 570 mm, height of clamp arms: 830 mm.

Condition: used, Year of construction: 1998, Hydraulic chainsaw Blade maximum diameter 500mm Small stroke cutting capacity: 250/120mm Double stroke cutting capacity: 600/120mm Command by double buttons Fodpfxsyngb Ae Akkegd Motor 7.5kw Small run: 36 cups/min Double feed: 18 cuts/min 400V 350 cm stop with rollers with digital display 1 m roller conveyor at discharge Machine documents Machine footprint: Chainsaw: 110cm/140cm/h175cm (with pallet) Conveyor discharge: 370cm/110cm/h90cm Input conveyor: 70cm/65cm/h90cm Dimensions of the assembly: 530cm/140cm

Condition: excellent (used), Year of construction: 1997, machine/vehicle number: 507688, functionality: fully functional, Hema bandsaw in very good, used condition. Garant 500 – manufactured in 1997. The bandsaw was purchased from a dealer in 2019 and used only occasionally. The machine is being sold as part of the liquidation of our carpentry business. Fedpfszivaiex Akksgd Collection price – delivery possible upon request. The sale is made with the exclusion of any warranty for defects. Liability for intent, gross negligence, as well as for damages resulting from injury to life, body or health remains unaffected. Claims for defects that were fraudulently concealed also remain unaffected. An inspection of the machine is possible by arrangement. Fixed inspection dates on July 18th or August 1st from 10 a.m. to 2 p.m. at our premises in Stemwede.

Condition: new, Year of construction: 2022, machine/vehicle number: 22-10-12-042, functionality: fully functional, saw blade diameter: 450 mm, height adjustment type: electric, actuation type: electric, table height: 910 mm, Equipment: documentation/manual, saw blade guard, scorer, Altendorf F45 - Pro-Drive Year of manufacture: 2022 Accessories: 2-axis scoring unit Rapido (with pivoting function), safety device, LED lighting, table extension 840 mm, double roller carriage with a length of 3000 mm, miter fence 3200 mm PAK, parallel fence DIGIT x 1000 mm, DUPLEX 1350 mm, single tilting fence Due to a change in production, the machine was no longer put into operation and is therefore new. An identical model is still in use. The machine has never been used in production and was only stored. The machine is being sold as part of the closure of our carpentry business. Fgjdpfeziu Rtsx Akkjd Collection price - delivery possible upon request. The sale is made with the exclusion of any warranty for defects. Liability for intent, gross negligence, and damages resulting from injury to life, body, or health remains unaffected. Claims for defects that were fraudulently concealed also remain unaffected. An inspection of the machine is possible by arrangement. Fixed inspection dates: July 18 or August 1, from 10 a.m. to 2 p.m. at our facility in Stemwede.

Condition: good (used), Year of construction: 1983, machine/vehicle number: 8398714, functionality: fully functional, Paul multi-blade saw in good, used condition. K2V800/370/310 - Year of manufacture 1983 The multi-blade saw was used reliably for many years for the production of moldings and is still connected to the power supply. The machine is being sold as part of the closure of our carpentry business. Includes 5 saw blades. Collection price – delivery possible upon request. Fgodpfx Asziuxdokked The sale is made with the exclusion of any warranty for defects. Liability for intent, gross negligence, and damages resulting from injury to life, body, or health remains unaffected. Claims for defects that have been fraudulently concealed also remain unaffected. An inspection of the machine is possible by arrangement. A fixed inspection date is scheduled for July 18 or August 1 from 10 a.m. to 2 p.m. at our facility in Stemwede.

Condition: good (used), Year of construction: 2002, functionality: fully functional, For sale is a robust and powerful SAC CS 40 panel saw, manufactured in 2002. The machine is in good used condition and is ideal for professional use in workshops and carpentry businesses. Technical data: Manufacturer: SAC (Sueri Alfredo S.p.A.) Type: CS 40 Year of manufacture: 2002 Sliding table length: 3,000 mm Main saw blade diameter: 400 mm Scoring saw blade diameter: 120 mm Motor power: 6.25 kW Voltage: 400 V / 50 Hz 3 saw blade speeds: 2,800 / 4,000 / 5,000 rpm Electric cutting height adjustment Electric tilting adjustment of the saw unit Large-format sliding table Outrigger with workpiece support CE version Equipment: Sliding table with 3,000 mm sliding table length Fjdpezf Evrjfx Akksgd Scoring device Electric height adjustment Electric tilting adjustment Outrigger with telescopic stop Control panel with electronic display 400 V three-phase connection Notes: CAUTION - the cross slide is NOT original! The digital display of the length stop is not available. The machine is supplied without upper dust extraction. Used condition with age-related signs of wear. Functional. The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales and changes are subject to change. All information is without guarantee.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Multi-blade circular saw K34/G/2200 Longitudinal cutting with edge trimming • Feed rate 2–48 m/min Fedpfx Aozh U A Hskkjgd • Cutting height up to 58 mm • Main motor 22 kW • 9 saw blades + 2 scoring blades

Condition: used, Year of construction: 1986, Roll diameter: 600 mm Cutting height: 385 mm Motor power: 2.2 kW Table tiltable Table size: 540 x 600 mm Total height: 2100 mm Weight: approx. 260 kg Storage location: Nattheim Fgodpfjw D Aybex Akkod

Condition: used, Year of construction: 1992, Wheel diameter: 500 mm Band guidance above and below Tilting table Location: Nattheim Fjdpfx Akow D Aw Hjkegd

Condition: used, Cutting area: 5300 x 2200 mm Cutting depth: 80 mm Fgedpfsynttfox Akkjd Location: Nattheim

Condition: used, Year of construction: 2024, New machine – Special price – Year of manufacture 2024 HAND GUARD Edition Single Flex unit. The image shows the system. HAND GUARD is based on early hazard detection to protect the operator from injuries and works in any application. The camera-monitored system first gives a visual warning to alert the user to an impending danger. If the hazard persists, the saw blade is lowered without causing any damage to the machine or material. HAND GUARD supports the processing of various materials such as wood, metal, and plastic. • Contactless and injury-free • Quick commissioning • 100% damage-free • Operates with concealed cuts • Does not need to be deactivated, permanent function • Max. 500 mm saw blade diameter can be fully retracted under the one-sided tilting saw unit as standard. Tilting range: 0 - 46°, equipped with a quick-change system for the main saw blade. Motorized height and tilt adjustment with a maximum saw blade protrusion of 179 mm (removal of the scoring unit may be required in some cases). Additionally, the control unit is positioned at eye level, allowing you to adjust the blade height and tilt, as well as, depending on the control package, the RPM and other functions. The new, clear industrial design marks the exceptional status of the Altendorf brand: This sliding table saw combines distinctive design with timeless aesthetics. The Altendorf double roller carriage is renowned for its smooth operation and precision. It can be locked steplessly in any position. The large double rollers keep the upper carriage absolutely precise in connection with the lower carriage within the respective guide rods. This running quality is maintained for decades, even under heavy use and contamination. The carriage construction is extremely torsion-resistant and dimensionally stable. An additional front support roller with a width of 300 mm is included, offering valuable support for cutting long workpieces on the rip fence. Positionable at 90° under the double roller carriage. 12" touchscreen with integrated keyboard • Automatic dimension correction at the rip and angle fence when tilting the saw unit • Stepless fine control of the axes via +/# keys • Easy axis calibration • Machine diagnostics, operating hours counter, USB interface • Recall last dimension entry (back function) • Conversion of pointed to blunt measurements at the rip and angle fence • Shear cut function with automatic calculation of missing angles or dimensions • Advanced tool management for up to 100 tool memory slots • Storage of scoring position (3-axis scorer) • Input for main blade core thickness & cutting width • Input for main tool speed Additional functions • Grooving: automatic step-by-step positioning of the rip fence • Chain dimension function: cutting sequences with identical distances at the rip fence • Oversize angle cut • Calculator function with result transfer to the axes • Geometric shapes, calculation of missing angles or dimensions • False miters, calculation of missing angles or dimensions • 9999 storable cutting programs • Standard provision for remote maintenance • Template holder directly next to the touchscreen Included accessories for Edition Single Flex: • Double roller carriage with carriage length of 3000 mm • Vario drive 5.5 kW (7.5 HP) VAR Fedjyyap Espfx Akkegd

Condition: used, Year of construction: 2001, Max. cutting width: 4300 mm, max. cutting height: 2200 mm, saw blade diameter: 300 mm, max. processing thickness: 80 mm, saw blade bore: 30 mm, measurement system: scale, saw head tilting: manual, saw feed: manual, extraction: external extraction, saw beam locking: manual, weight approx.: 1200 kg, dimensions: 5300 x 1200 x 2900 mm, motor power: 5.5 kW. Storage location: supplier. Fgsdpoy Idb Uefx Akksd

Condition: used, Year of construction: 2006, Motor-adjustable parallel fence Lengthwise stop with display One-sided motorized pivoting Sliding carriage 3000 mm 5.5 kW Fgjdpfx Aozawiuokksd Scoring saw Location: Nattheim

Condition: used, Year of construction: 2002, total length: 5,050 mm, total width: 2,420 mm, total height: 800 mm, Colour: Grey Weight: 750 kg Fsdpfx Akozcng Nekegd - Details: - └ Description: Digital readout does not function. - Year: 2002 - Documentation available: No - CE certificate present: No - Serial number: 221 / 0-206 - Max. cutting height vertical [mm]: 1950 - Max. cutting height horizontal [mm]: 1900 - Max. cutting width [mm]: 3300 - Max. cutting depth [mm]: 50 - Max. saw blade diameter [mm]: 300 - Arbor saw blade diameter [mm]: 30 - Horizontal cutting: Yes - Vertical cutting: Yes - Voltage [V]: 400 - Fuse [A]: 16 - Transport dimensions: 5050mm x 2420mm x 800mm (l x w x h) - Transport weight [kg]: 750kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2015, functionality: fully functional, operating hours: 240 h, power: 5.5 kW (7.48 HP), input voltage: 400 V, cutting width (max.): 1,300 mm, saw blade diameter: 450 mm, year of last overhaul: 2023, Equipment: scorer, We are offering this used Altendorf F45 EvoDrive panel saw, manufactured in 2015. Main motor: 5.5 kW Saw blade diameter: 250-450 mm Scoring saw motor: 0.75 kW Saw blade that can be swiveled to one side Digital stops Parallel fence with a cutting width of 1300 mm Control panel at eye level Touchscreen control and buttons for input Double roller carriage with a carriage length of 3200 mm Front support roller 240 operating hours Included are 8 saw blades for wood, aluminum, and plastics. Some of these may need sharpening. The saw received a major service last year. During this service, defective parts were replaced, the roller carriage was serviced, and all angles were readjusted. Available from July 27, 2026. If you have any questions or require further information, please send us a message or call us. Fgjdpfxezkp D Do Akked

Condition: used, Cutting height: Max. 100 mm (at 315 mm saw blade diameter) Saw blade swing: 0 to 45° (manual) Fjdpezflv Sofx Akkjgd Motor power: 4 kW (approx. 5.5 hp) Trimming table (sled): 1600 mm standard Cutting width: default 1000 mm on the parallel stop

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 TECHNICAL DATA Wheel diameter 500 mm Belt speed 1300 m/min Cutting height 330 mm Cutting width 480 mm Blade length max. 4140 mm Saw blade width min. / max. 15 mm / 25 mm Optional, with special coating: saw blade width min. / max. 6 mm / 20 mm Fjdpfjv Huggsx Akkogd Table size 670 x 495 mm Table height 900 mm Dust extraction port 2 x Ø 100 mm Motor power 1.5 kW / 2 HP Special voltage: 400 V / 50 Hz Color RAL 7035 light gray and RAL 5000 violet blue Net weight approx. 210 kg TECHNICAL DESCRIPTION Solid German engineering Machine stand in aesthetically pleasing, modern, torsion-resistant, double-chambered, welded steel construction Upper and lower doors secured via limit switches Upper and lower precision band saw blade guides APA 2, size 1 Finely planed gray cast iron table Tilting table top up to 45° Dynamically balanced band saw wheels with vulcanized rubber tires Fence rail on the left of the saw blade, can be used Fence profile can be folded down Blade tension indicator 1 saw blade 4140 x 20 x 0.45 mm, tooth spacing 6 mm, No. 3783.20K Mechanical height adjustment of the saw blade guard via handwheel with locking ratchet Push-button switch for start/stop with emergency stop button and motor protection relay Wear-free, electric motor brake CE compliant GS tested Machine stand, left-hand version Drive motor 1.5 kW / 2.0 HP Weight approx. 210 kg Availability: short-term Location: Flörsheim

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 TECHNICAL DATA Wheel diameter: 800 mm Belt speed: 1800 m/min Cutting height: 520 mm Cutting width: 780 mm Max. blade length: 5775 mm Min./max. blade width: 15 mm / 40 mm With special lining (optional), min./max. blade width: 10 mm / 35 mm Table size: 1145 x 760 mm Fgodeww Ravepfx Akkjd Table height: 930 mm Extraction port: 2 x Ø 120 mm Motor power: 4 kW / 5.5 HP Voltage: 400 V / 50 Hz Color: RAL 7035 Light Grey and RAL 5000 Violet Blue Net weight: approx. 525 kg TECHNICAL DESCRIPTION Robust German engineering Machine frame in a modern, visually appealing, torsion-free double chamber steel welded construction Upper and lower doors protected by limit switches Upper and lower precision bandsaw blade guides APA 2, Size 2 Finely planed cast-iron table Table can be tilted up to 45° Dynamically balanced bandsaw wheels with vulcanized rubber tyres Rip fence can be used on the left of the saw blade, fence profile can be folded down Blade tension indicator 1 bandsaw blade 5775 x 30 x 0.8 mm, tooth pitch 9 mm, No. 3780.30I Mechanical height adjustment of blade guard by handwheel with locking ratchet Cam switch with star-delta starting and emergency stop button Mechanical motor brake with main switch and motor protection relay CE compliant GS tested Machine frame, left-hand version Drive motor: 4.0 kW / 5.5 HP Push-button control, 3 to 4 kW With automatic star-delta start (for 3.0 – 4.0 kW motor), (instead of cam switch) Availability: Short-term Location: Flörsheim