Panel saw

Holz-Her 1265

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Condition: well maintained Features and technical data: Cutting length: 4300 mm Cutting height: 2200 mm Cutting depth: 45 mm Bwsdpjycm Avsfx Afnsh Motor: 3 kW Saw blade diameter: 220 mm with SuperCut scoring unit with automatic shifting grid with complete length stop with strip stop Availability: short-term Location: 65439 Flörsheim

Condition: excellent (used), Calibration and fine sanding machine with 1 sanding unit 1 motor, processing from above Working width 1000 mm Sanding belt dimensions 2200 x 1030 mm Workpiece dimensions 3 - 170 mm Table height adjustment motor 0.18 kW, 400 V, 50 Hz Main motor 7.5 kW, 400 V, 50 Hz 2 feed speeds 5.5 & 11 m/min 1st unit: Combination unit, sanding drum, rubberized, 90 Sh / pneumatic sanding pad Sanding pad NEW 2nd unit: Cleaning brush Compressed air requirement approx. 6 bar Suction diameter 200 mm Dimensions approx. L x W x H = 1385 x 1980 x 1900 mm Weight approx. 1800 kg Automatic workpiece thickness adjustment with digital display Oscillation of the sanding belt Sanding belt emergency stop with disk brakes Table extension with 3 rollers in the outfeed Emergency stop button Main switch Bsdpfx Asudxchjfnewh TRANSPORT CARPET LIKE NEW - was replaced by us approx. 3 years ago MORE THAN 30 WIDE BELT SANDERS Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: used, Panel saw Manufacturer: Holz-Her Model: 1265 Year: 1989 Technical specifications Working dimensions Cutting dimensions (mm) Length x Height 3300/4300 / 5300 x 1900 4300 / 5300 x 2070 4300 / 5300 x 2200 Trimming height = max. Cutting height - 65 mm Cutting depth (mm): 45 (50) Cutting depth depends on the workpiece Dimensions in brackets without Super Cut Saw unit Motor power: 3 kW, 400 V, 50 Hz Saw blade diameter (mm): 220 Saw blade speed (min) at 50 Hz: 5450 Extraction Air consumption (m/h): 2000 Air speed (m/s): 20 Connection (mm): 160 Machine dimensions Floor area Length (mm): 4315 / 5315 / 6315 Depth (mm): 1420 Bwjdpsw I A Dysfx Afnsh Height (mm): 2500 / 2640 / 2775 Weight (kg): approx. 760 (5300 x 2200mm) Gross weight (kg): approx. 990 (5300 x 2200 mm)

Condition: used, Year of construction: 1985, functionality: fully functional, cutting length (max.): 5,100 mm, cutting height (max.): 2,150 mm, power: 3 kW (4.08 HP), Machine in very good condition, as shown in the pictures. Mains connection: 380V Rated current: 14.7A Bwsdpfjw Upzrjx Afnsh Saw unit power: 3kW Speed: 2830/5490 rpm

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. Bedpfxjqt Dmyj Afnewh The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: used, Year of construction: 2021, MEGA 300 TS Numerical Control Panel height 60 mm PVC/Abs mm 3 Feed speed up to 22 m/min Working height adjustable electronically by C.N. Motorized rubber belt with higher pressure Introduction system for small panels Panel support guide with electronic adjustment by C.N. Side roller conveyor with idle wheels for panel support Anti-adhesive group Rectifier unit with two motors electronically adjustable by C.N. Roll holder plate for delicate edges Edge magazine with 2 positions Gluing unit for EVA glue with glue tank and pre-melter Edge pressure group on straight profiles with pressure rollers electronically adjustable by C.N Non-stick group Trimming unit with 2 motors with automatic inclination adjustment Trimming unit with 2 superimposed motors Trimming / gleaning group with 2 tilting motors electronically adjustable by C.N. Rounding unit with 4 motors Edge scraper unit electronically adjustable by C.N. Bwedpst Hal Defx Afnoh Glue scraper unit Oscillating brush group Hairdryer group

Year of construction: 2026, condition: new, Picture 1: 10tonnes Hydraulic toe jack with multiple adjustable lifting claw and integrated hydraulic pump and external hose coupler. Low weight. other pictures: Several Hydraulic toe jack HTS ECO-Jack S-Series - Made in Germany -NEW- with different lifting capacities from 3-25 tonnes, integrated 520 bar hydraulic unit, swiveling pump lever, swiveling support legs and adjustable lifting claw, external hose coupler starting at 10 tonnes, twin pump starting at 15tonnes capacity. Bwodpfx Aogi Dkcsfnoh Please request for capacity and other variants up to 50 tonnes. Fast delivery - normally in stock.

Condition: reconditioned (used), Year of construction: 1993, functionality: fully functional, Weight approx. 1140 kg Connected load 380V 7.5kW Scoring unit 0.75 kW manually adjustable via pneumatic connection, can be raised and lowered Trimming length 2800 mm speeds 600/5000/4000/3000 rpm via V-belt Bwedpsq Au Husfx Afnsh Electric tilt with digital display Electric height adjustment with digital display Cutting width 1000 mm rear support table 950 x 400 mm wide angle fence 2500 mm with extension 2840 mm with 2 stops suction connection 120 mm + 80 mm for PSV Parallelogram protection device with narrow and wide hood Trimming fence Air requirement for scorer 6bar connection

Condition: good (used), Year of construction: 1981, spindle moulder, spindle moulder, wood milling machine -Manufacturer: Martin, table milling machine type T 21 with table extension -Milling spindle: Ø 30 mm -Speeds: 3,000/4,500/6,000/9,000 rpm Bedpfjwnbfkox Afnowh -Dimensions total: 1620/1060/H1120 mm -Total weight: 698 kg

Condition: used, machine/vehicle number: 007186, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 18 m/min Bjdpfx Afsu T Tuwonowh Maximum panel thickness: 60 mm Operating Units: 10 nr