Condition: used, Year of construction: 2020, Maximum height 135 mm Maximum width 750 mm Minimum length 650 mm Cam chain width 350mm Maximum blade diameter 381 mm Mini blade diameter 250 mm Guodpfx Asx A Dzujayek Motor shaft 40 kW Electronic forward speed from 7.5 to 30m/min Voltage 380 V Supplied with several blades, adjustment rings, machine documents and service keys CE Machine almost new, working +- 10h!!!! New price for similar machine: around €49,000

Condition: excellent (used), Year of construction: 2002, operating hours: 1,870 h, Tilting panel saw T 73 by Martin with 3-axis scoring unit and 3m table Sliding table length: 3000mm Saw blade tilting range: 0 to 46 degrees Speeds: 2800, 4000, and 5500 rpm with electronic speed display Drive motor 5.5kW with automatic motor brake Saw blade diameter up to 500mm Maximum cutting height: 170mm Cutting width up to 1100mm, adjustable from the front via handwheel and manually movable Tilting angle and height adjustment electrically adjustable Crosscut fence with 2-point stop, up to approx. 3350mm Parallelogram cross table with digital angle display and roller Folding rip fence Extraction ports 120 + 100mm Sliding table lockable in every position Handle grip Edging shoe 1 set of plastic saw blades with matching 3-axis scorer, newly sharpened 3 riving knives 3-axis scoring aggregate, fully electrically adjustable while the machine is running Gedpfjxtvcxjx Aayjuk 2 protective hoods Counter-angle fence for acute angles Tool compartment Emergency stop switch Operating manual CE marking Machine with slight signs of use on the anodized surface of the sliding table. Minor cuts on the sliding table have been repaired. Original paint, only spot repainted in places. Excellent condition as shown in the original photos. Dimensions approx. 3300 x 3750 x 1600mm (LxWxH). Weight approx. 1950kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration in our warehouse. See 'other offers from this supplier.'

Condition: new, Year of construction: 2022, functionality: fully functional, Holtec ES 121 SHK 4 m Guedpfxjx Dmavj Aayok Year of manufacture: 2022 Control: Simatic HMI Saw chain: 4788 (190 cm) Guide bar: 3322 (190 cm) Sawn timber data: Packages for cutting: Max. 4200, an.= 1200 al.= 1200, Minimum: 2,500 Packages after cutting: max: 4,000, min: 700 Cutting waste: max. 300 Operating voltage: 400 V 50 Hz Oil filling: HLP-D-32 Tank capacity: 70 l Pressure: 70 bar The machine is unused and dismantled. Inspection possible at any time.

Condition: excellent (used), Year of construction: 1977, Panel saw Scoring unit Guodpfowc Svpjx Aayek Year of manufacture: 1977 1250 mm to the right of the blade 2800 mm cutting length 5.5 kW Dimensions approx. 2800 x 1200 x 950 mm Weight approx. 900 kg Not tiltable

Condition: ready for operation (used), total height: 1,915 mm, total length: 2,500 mm, total width: 1,290 mm, throat depth: 400 mm, empty load weight: 950 kg, nominal power: 6 kW (8.16 HP), Rond materiaal: Ø 400 mm Rechthoekig: 400 x 400 mm Maximaal materiaalgewicht: 1000 kg/m Snijsnelheid: 20 tot 110 m/min Afmetingen zaagblad: 5090 x 41 x 1,3 mm Hydraulische klemming spaantransportband Max height of workpiece: 400 mm Guedpfjxpymasx Aayok Sawspeed: 20-110 m/min Length of band saw: 5700 x 41 x 1.3 mm

Condition: used, Year of construction: 2011, Used machine Year of manufacture: 2011 Condition: well-maintained Gsdpfx Aasx Enqnsysuk Equipment and technical data: - Electric height and tilt adjustment - Screen control with dimension input via keyboard - Equipment package F 45 III - Double roller carriage with carriage length 3000 mm - Cutting width 1300 mm – CNC - Table width extension, anodized aluminum - Drive power 5.5 kW VARIO with stepless speed regulation 2000-6000 rpm - AKE clamping system - Saw blade diameter max. 500 mm, cutting height max. 175 mm - Height-adjustable and swiveling safety hood incl. overhead support arm - Control panel at eye level - Document holder - 3-axis scoring unit RAPIDO Plus with electric height, lateral, and saw blade width adjustment, 0.75 kW - Table extension 840 mm, anodized aluminum - Angle-mitre fence Availability: End of January 2026 Stock location: Hesse

Condition: used, Martin type T70 panel saw for edging and sizing wood and other panel materials. Guodjxqfghspfx Aaysk Sled length: 2.500 mm cutting height: about 100 mm

Condition: excellent (used), Year of construction: 2009, Tilting Panel Saw T74 by Martin with 3-axis scoring unit, 3m sliding table, and electrically operated rip fence From vocational school Control panel at eye level with color touch-screen control Sliding table length 3,000 mm Saw blade tilting from 0 to 46 degrees Spindle speeds: 2,800, 4,000, and 5,500 rpm with electronic speed display Reinforced drive motor 7.5 kW with automatic motor brake Godpsxp Rmdsfx Aayjuk Saw blade diameter up to 500 mm Saw arbor with Pro-Lock quick-change system Max. cutting height 170 mm Cutting width up to 1,100 mm, electrically adjustable, positionable, and movable by hand Tilting angle and height adjustment electrical Crosscut fence with 2-point stop up to approx. 3,350 mm Parallelogram cross table with digital angle display Rip fence fold-away Extraction ports 120 + 100 mm Sliding carriage can be locked in any position Hand grip 1 set of plastic saw blades with matching 3-axis scoring unit, freshly sharpened 3 riving knives 3-axis scoring unit, fully electrically adjustable while the machine is running 2 safety guards Tool compartment Emergency stop switch Operating manual CE marking Machine with minor signs of use on the anodized sliding table. Small nicks on the sliding table have been repaired. Original paint, only touched up in places. Excellent condition from vocational school as shown in the original photos. Dimensions approx. 3,150 x 3,600 x 1,700 mm (LxWxH). Weight approx. 1,950 kg. The machine can be demonstrated at our facility by appointment. We only offer machines that are ready for demonstration in our warehouse. See “more offers from this supplier.”

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, cutting length (max.): 3,200 mm, cutting width (max.): 1,250 mm, cutting width at rip fence: 1,250 mm, cutting height (max.): 80 mm, cutting height with scoring (max.): 80 mm, saw blade diameter: 300 mm, table length: 3,200 mm, height adjustment type: hydraulic, type of input current: three-phase, input voltage: 400 V, Equipment: saw blade guard, Year of manufacture: 1991, in very good condition and free of play First owner Almost exclusively used for processing panel material Sliding table 320 cm 45° hydraulically tiltable Guodex Dkvzspfx Aayok Scoring unit All stops, protective covers, and required accessories included

Condition: excellent (used), Year of construction: 2017, Holzkraft Bandsaw HBS 940 AS – Top Condition – Very Low Hours – DESCRIPTION - Heavy-duty design with high dead weight for maximum running smoothness - Especially quiet and precise operation thanks to a torsion-resistant machine frame - Cast iron flywheels with rubber coating and cleaning brush - 3-roller precision blade guides standard, above and below - Large grey cast iron saw table, tiltable from 0° to +15°, ground and polished surface - Large cast iron parallel fence with round bar guide, easily adjustable - Saw blade tension indicator - Precise cutting height adjustment via rack and pinion, with millimeter scale - Self-braking motor TECHNICAL DATA Dimensions and weight Length (product) approx. 1550 mm Width/depth (product) approx. 920 mm Height (product) approx. 2900 mm Weight (net) approx. 860 kg Dust extraction connection Extraction port diameter: 2 x 140 mm Work table(s) Table length: 1250 mm Table width: 800 mm Table height: 1060 mm Table tilt: 0 - 20° Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Output power: 5.5 kW Cutting range Max. cutting height at 90°: 560 mm Max. cutting width: 910 mm Bandsaw blade Blade speed: 1550 m/min Flywheel diameter: 940 mm Gedpfx Aexz Ulzoaysuk Blade length: 6690 mm Min. blade length: 6630 mm Max. blade length: 6700 mm Min. blade thickness: 0.8 mm Max. blade thickness: 0.9 mm Blade guide: precision guide above and below Location: ex-stock 54634 Bitburg - immediately available -

Year of construction: 2025, condition: new, New machine Year of manufacture: 2025 Gedpfox Enrxjx Aayeuk Features and technical data: L'invincibile SI X - PANEL SAW WITH DOUBLE BLADE TILTING 931201 Frequency: 50 Hz 570348 Scoring unit with independent motorization 570351 LED lighting in the scorer area 530130 "Full Support & Wireless" 570353 Extension with roller track on the rip fence side 080999 Ex works R01264 L'invincibile SI X CE version 083202 Base 109993 MACHINE LANGUAGE: German 930731 Voltage: 400V EU 080685 Additional packaging 109999 Standard safety regulations Article number: SI X Variant: R021401 Availability: upon request Location: Flörsheim

Condition: used, knife: HW WZ Z120 Gujdpsrucqcjfx Aayek flight circle (ø): 500 mm drilling: 30 mm width: 5.2/3.2mm material: steel Hole spacing: approx. 60 / 63 mm

Condition: used, knife: HW WZ-Z72 flight circle (ø): 494 mm drilling: 30 mm width: 3,7 mm material: steel Available: 2 Gjdpetddxrsfx Aaysuk

Condition: used, Diameter: 370 - 380 mm width: 3-5 mm Gedpfxslf I D Eo Aayeuk drilling: 60 mm bolt circle: 100 mm * like new or sharpened, * 8 pieces, * suitable for Holzma OPT HPP 350 or similar.

Condition: like new (used), Timing belt sold by the meter 100 mm suitable for Reinhardt saws. Gsdpfx Aajw Uig Ueysuk length: approx. 20 m width: 100 mm

Condition: used, Saw unit including cable and switch. engine: 0,24 kW Gujdpfew Uz Rrex Aayok number of revolutions: 2,700 rpm

Condition: used, Pfeiffer Piccolo pendulum saw with a stable roller conveyor for cutting boards and beams. The machine features a pneumatic saw feed with safe two-hand operation. Video available upon request. Cutting height: max. approx. 120 mm Cutting width: max. approx. 600 mm Feed: Pneumatic cutting height: max. approx. 120 mm Gusdsxrtzpopfx Aayek cutting width: max. approx. 600 mm feed: Pneumatic roller conveyor: 250+360 cm

Condition: used, Outer diameter: 60 drilling: 50 mm Gujdpfxsxvchms Aayok length: 100 mm material: steel number of revolutions: max. 9,000 rpm

Condition: used, length: 950 mm width: 600 mm cutting height: about 60 mm engine: 2,2 kW connection: 16A / 400V Mobile firewood saw for chopping strips, branches and other waste wood. Gujdpfxetvb Hho Aayek

Condition: used, knife: HW WZ Z144 flight circle (ø): 500 mm drilling: 30 mm Gsdpfx Aaswcpnpoysuk width: 3.5/4.8 mm material: steel

Condition: used, Striffler Type 2750-E double-cut miter saw for precise miter and cross-cut cuts in wood profiles, moldings, and frames. The machine is ideal for series production in window, door, and furniture construction thanks to two pneumatically pivoting saw units and electronic positioning. cutting length: about 2,200 mm miter angle: 45° – 90° workpiece: max. 50x70 mm Gjdpfxow D Dfxe Aayeuk Further data: See PDF

Condition: used, Double cross-cut saw / format saw Rüco 21 for cutting, trimming and shortening wood or panels. saw: 3 cutting width: max. approx.: 2,050 mm Depth of cut: max. approx.: 2,200 mm Gsdjlfdx Uopfx Aayouk Cutting depth: max. approx.: 2,200 mm cutting height: max. approx. 100 mm More technical data: see PDF Further technical data: see PDF

Condition: used, cutting length: max. 4.000 mm Gedpep E I S Refx Aayeuk saw blade ø: 400mm (max. 450mm) Length adjustment: Manually Angle adjustment: Manually Double-sided mitre saw Düspohl DGK 400 B for two-sided mitre cuts with saw unit from above and additional horizontal cutter (cornice function).

Condition: used, knife: HW-Z72 Godpfx Aetddxvoayouk flight circle (ø): 500 mm drilling: 30 mm width: 3,8 mm material: steel

Condition: used, Length: 950 mm Width: 600 mm Cutting height: approx. 60 mm Guodpstvb Hdsfx Aayek Motor: 1.5 kW Connection: 220 V Mobile firewood saw for shredding battens, branches and other waste wood.