Used pumps for sale (566)

Condition: used, Grundfos Vertical Water Pump Complete with isolator valve Power isolator switch Todpfxez E Nhvj Aa Ijc 1.5 kw 5.7 m3/hr H max 60m

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) Tsdpfx Aaoyug Hxe Isc "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: used, Year of construction: 2015, functionality: unexamined, For sale is a well-maintained screw conveyor pump. It was used intermittently over several years in conjunction with a chain hoist. Includes a frequency converter. These pieces of equipment were disassembled in 2024 due to a relocation at the old site and have not been used since. The pump can be connected to power and its functionality can be checked. Tsdoz Hm Trepfx Aa Isc Inspection is possible at our location in Zurich.

Condition: excellent (used), Year of construction: 2022, Wangen Twin NG70 Screw Pump 2022, Stainless, designed to reliably pump low to high viscous, volatile or gaseous products and for applications where maximum hygiene and efficiency is required. The hygienic pump for food and beverages, chemicals and cosmetics. With touch screen HMI screen controls, all on mobile stainless skid, 3Ph Todpezt Ibgofx Aa Iec

Condition: used, Year of construction: 2007, functionality: fully functional, overall weight: 221 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 54 A, Device No. 2: KSB Blockp Etabloc 65-200/3002 GN10 Todpfx Aaoxbhtre Iec IEC standard motor KSB 30 kW 2900 rpm Part no.: 48875108 Single-stage volute casing pump with nominal ratings according to EN 733, equipped with a KSB IEC three-phase motor, protection class IP 55, insulation class F, flange-mounted to form a monobloc unit. Pump shaft is rigidly connected to the motor shaft. Fitted with an uncooled mechanical seal, corrosion-resistant shaft sleeve, and replaceable wear rings. Drive lantern made of grey cast iron, with contact protection according to EN 294. Mounting via support foot up to motor size 112, and via motor foot from motor size 132 onwards. Volute casing: Grey cast iron Impeller: Grey cast iron Shaft, pump: Tempered steel

Condition: used, Year of construction: 2007, functionality: fully functional, overall weight: 221 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 54 A, Device No. 1: KSB Blockp Etabloc 65-200/3002 GN10 Tedjxbhtlepfx Aa Isc IEC standard motor KSB 30 kW 2900 rpm Part No.: 48875108 Single-stage volute casing pump with rated capacities according to EN 733, fitted with KSB IEC three-phase motor, protection class IP 55, insulation class F, assembled as a block unit. Pump shaft rigidly coupled to motor shaft. Equipped with uncooled mechanical seal, corrosion-resistant shaft sleeve, replaceable wear rings. Drive lantern made of cast iron, with contact protection in accordance with EN 294. Mounting by support foot up to motor size 112, by motor foot from motor size 132 upwards. Volute casing: Cast iron Impeller: Cast iron Shaft, pump: Tempered steel

Condition: good (used), Year of construction: 2013, overall weight: 560 kg, Pump technical data: • Manufacturer: KSB • Type: ETIC D 65 / 45-1 • Capacity: Q = 45 m³/h • Head: H = 182.19 m • Year of manufacture: 2013 • Flange connections (visually DN150 – as shown in photos) • Solid, industrial construction • Pump dismantled from an industrial installation Electric motor: • Manufacturer: Siemens • Power: 37 kW • Supply: 3-phase Todpfx Ajydv I Doa Isc • Speed: approx. 2950 rpm (50 Hz) • Industrial design, IC411 cooling • Mounting: IM B3 • Motor mounted on frame together with pump Condition: • Technical condition: used • Visually normal signs of use, no cracks or damage to the housing • Shafts and flanges complete (visible in the photos) • Sold as a set: pump + motor + frame Additional information: • Ideal for industrial applications: process installations, energy, chemical, process water • Price quoted per unit.

Condition: used, functionality: fully functional, Hydraulic power unit Tank Pack Hydac Flutec – 7.5 kW including gear pump Danfoss SNP2/22 DC001 1/0E 22 cm³ Tjdpfx Aasz Huxpo Ijc including electric motor 7.5 kW, 1435 rpm

Condition: good (used), Year of construction: 2018, DOPAG P200 2H Drum Pump / Material Transfer Pump Both the standard version and the tandem version are available. Manufacturer: DOPAG Dosiertechnik und Pneumatik AG Product type: Pneumatic drum pump / material transfer pump Series: P200 Version 1: Drum pump P200 2H Version 2: Drum pump P200 2H tandem Operating concept: 2-hand operation Drive: Pneumatic Compressed air supply: 6 bar Maximum container size: 200 l Maximum container height: 880 mm Year of manufacture: 11/2018 Weight P200 2H: 386 kg Weight P200 2H Tandem: 394 kg Material feed: Directly from the original container Pump principle: Piston pump Compressed air treatment: Festo SMC valve type: VSA4244-00-1 Todpfx Aajzr Tz Ae Isc The DOPAG P200 systems are designed for the transfer of highly viscous materials from 200-liter containers, e.g. adhesives and sealants or lubricants. Depending on the specific pump configuration, different transfer rates, gear ratios and material ranges are possible. The tandem version enables the use of two material containers within a correspondingly designed transfer system.

Condition: new, Year of construction: 2024, Brand: KSB Type: AU F-150-150-045 GG 109D Year of manufacture: 2024 Tjdsz Aqa Dspfx Aa Ijc 169.00 m3/h 19.00 m 1473 1/min Condition: new Includes manual

Condition: excellent (used), I am offering for sale a professional fire-fighting pump, a PFJ GmbH Jöhstadt TS 8/8 model, manufactured in Germany according to DIN 14410. This unit is designed for use by fire departments, rescue units, and for applications involving pumping large volumes of water. Tsdpezlknyjfx Aa Isc The pump is equipped with a powerful gasoline engine, a control panel with electric start, pressure gauges, and a complete set of fire hose connections. The unit is in very good condition – it was used sparingly and shows only minor signs of storage. Technical specifications: Manufacturer: PFJ GmbH Jöhstadt Model: TS 8/8 DIN 14410 Year of manufacture: 1994 Pump type: FP 8/8 DIN 14420 Nominal flow rate: 800 l/min Nominal pressure: 8 bar Rotational speed: 2725 rpm Gear ratio: 1.9 : 1 Weight: 147 kg Fuel: lead-free gasoline Country of manufacture: Germany Advantages: Very low operating hours – approx. 9.4 operating hours Robust German construction Electric start and manual starter Complete set of indicators and pressure gauges Ready for use Ideal for volunteer fire departments, professional fire departments, collectors, and companies involved in water management.

Condition: excellent (used), functionality: fully functional, volume flow: 320 m³/h, operating pressure: 370 bar, power: 4.6 kW (6.25 HP), input voltage: 380 V, input current: 9 A, rotational speed (max.): 2,910 rpm, protection type (IP code): IP55, Vacuum pump - 2 units VACOM Type: VC 340-720 Power: 4.6 kW With central filters and Motan control system - 2 units Price for 2 units (2 sets) - 5000 EUR!!! Tsdpsyxwp Hofx Aa Ioc

Condition: like new (used), Grundfos MGE100LA 2-FF215-JA-300 pump 3.00 kW Tedpfx Aaozzmhzj Ijc Speed: 2900 - 4000 rpm Weight: 24 kg You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and browse our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data as well as errors in the description of the article may occur and are subject to change.

Condition: used, Year of construction: 2007, Schmalz A-175N-47/B-19 DI Piston Metering Pump, 6 bar, Metering Pump Manufacturer: Schmalz GmbH Device type: Piston metering pump Type: A-175N-47/B-19 DI Tedpjzxrn Iofx Aa Isc Series according to documentation: SR Design: Metering pump with return spring Year of manufacture: 2007 Maximum pressure: 6 bar Flow rate at 50 Hz: 226 l/h Flow rate at 60 Hz: 271 l/h Metering rate: adjustable Drive: Three-phase motor Motor type: 71 A 4 Motor protection class: IP55 Condition: used

Condition: excellent (used), For sale: Sterling Fluid Systems ZTIC 040160 industrial pump with Siemens 3kW motor. A robust, professional unit designed for use in industrial installations, water circuits, and technological systems. ⚙️ Technical specifications: - Pump manufacturer: Sterling Fluid Systems - Model: ZTIC 040160 - Type: AA ODC B2 KX - Motor: Siemens IE1 - Power: 3.0 kW - Voltage: 230/400V (3~) - Frequency: 50 Hz - Speed: approx. 2835 rpm - Protection class: IP55 - Insulation class: F Tjdpjyz Dxmefx Aa Isc - Connection: flanged 🛠️ Features: - Centrifugal pump for water and industrial liquids - Heavy-duty industrial construction - Reliable Siemens motor - Flanged version – easy installation in piping systems - Designed for continuous operation 📦 Condition: ✔️ Used ✔️ Very good technical condition ✔️ Freshly painted ✔️ Normal signs of use visible 📌 Applications: - Industrial systems - Heating and cooling systems - Water circulation - Manufacturing plants - Agriculture 📦 Set includes: - Pump with Siemens motor - As shown in the photos 🚚 Shipping: - Shipping by courier or pallet possible - Personal collection also available - Assistance with transport arrangements is offered

Condition: ready for operation (used), Year of construction: 1997, Etanorm SYN 80-200, centrifugal pump, for diesel fuel, 200 m3/h. El.motor 55 kw, 2940 rpm, 100 A. Tjdpfx Aajxzcbko Isc

Condition: new, ///// PRICE PER UNIT ///// For sale: professional submersible pump KSB AmaDrainer B 80-40 S – high-quality device designed for operation in demanding conditions (dirty water, sewage, drainage). ✔️ Condition: NEW ✔️ The pump has never been used ✔️ Original packaging / wrapping / documentation ✔️ The set includes cable + float switch + controller ⚙️ Technical data: Tedpfx Ajy Abr Hea Ioc Manufacturer: KSB (Germany) Model: AmaDrainer B 80-40 S Power: 4.0 kW Supply: 400V / 3~ / 50 Hz Current: 8.5 A Protection class: IP68 Capacity: up to 100 m³/h Rotation speed: 2800 rpm Insulation class: B Max. liquid temperature: 40°C Weight: approx. 65 kg ✅ Applications: construction dewatering pumping stations sewage and dirty water industry wells and tanks 📦 Set includes: ✔️ KSB pump ✔️ Power cable ✔️ Float switch ✔️ Documentation ✔️ Original packaging

Condition: used, Art. No.: Pum 31 Manufacturer: KSB Tsdpfx Aszxgwkea Ijc Type: ETANORM MX 100-200 MX 10 Item condition: very good, used Pump comes from a fire extinguishing system and has only been used for test runs. Available: immediately Flow rate: 5,000 liters/min Head: 49.6 m (water column) Revolutions: 2940 rpm Pump impeller: bronze Diesel engine Manufacturer: John Deere Type: 4045DF159 Power: 55 kW Revolutions: 2,940 rpm Year of manufacture: 2012 Operating hours: 37 Tank: 150 liters Control cabinet for automatic operation. The system can also be converted to an irrigation system with 12 bar pressure upon request.

Condition: used, Year of construction: 2008, There are two identical pumps available, nominal suction capacity: 245m³/h, ultimate pressure: 100hPa, ultimate pressure (continuous operation): 200hPa, rated motor power: 5.5kW, rated motor speed: 3000/min, sound pressure level (ISO 3744), 1m distance, at medium load: 75dB(A), oil fill: 1l, gas inlet: G2, gas outlet: R1, length: 1050mm, width: 515mm, height: 450mm, weight: 240kg. Tsdoz Da Nhepfx Aa Ioc

Condition: excellent (used), For sale is a professional IVECO Magirus TS 8/8 fire pump, equipped with a powerful, gasoline engine, FIAT 156 A 2.000, with a power output of 32 kW. This robust unit is designed for intensive use – suitable for fire brigades, industrial plants, farms, technical services, municipal companies, and for pumping large volumes of water. The pump is conveniently started using an electric starter. It also has an emergency manual start option. An integrated control panel ensures easy operation. Todpfxez Drc To Aa Ijc Pump Data: Manufacturer: IVECO Magirus AG Type: FP 8/8 / TS 8/8 Standard: DIN 14420 / DIN 14410 Year of manufacture: 1997 Serial number: 86385 PVR test number: 346/6/90 Nominal flow rate: 800 l/min Nominal pressure: 8 bar Pump rated speed: 2820 rpm Gear ratio: 1:1 Weight of the ready-to-use pump: 189 kg Engine Data: Manufacturer: FIAT Auto S.p.A. Engine type: 156 A 2.000 Capacity: 999 cm³ Power: 32 kW at 5000 rpm Limited operating speed: 3500 rpm Fuel: unleaded 95 gasoline Start: electric starter Emergency manual start Battery included Equipment: automatic PRIMATIC suction system two pressure gauges work light integrated fuel tank control panel with indicators RPM adjustment pump clutch discharge valves sturdy transport frame with handles The pump is in very good condition and is solidly built. It shows normal, minor signs of wear consistent with its age. The condition and completeness of the unit are accurately depicted in the photos. This is a very powerful, professional pump with a flow rate of up to 800 liters per minute – ready for fire, industrial, and agricultural applications. Shipping on a pallet is possible.

Condition: like new (used), Grundfos NB 32-200/206 Single-stage block pump, centrifugal pump Speed: 2915 min⁻¹ Flow rate Q: 33.7 m³/h Head: 46.3 m Max. pressure: 16 bar You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! Tedpfozzllxsx Aa Iec You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Condition: good (used), Wilo ILE80-190 Glanded centrifugal pump Glanded centrifugal pump, with built in frequency converter for electronic control for constant or variable pressure, 21Kw, two in stock Todpfx Aajw Dylhj Ijc

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 803412, volume flow: 896 m³/h, operating pressure: 4 bar, Screw pump based on ABB motor 250 kW, 455A, 1486 rpm, Bornemann pump W8.4ZK-144, 4.5 bar, 896 m3/h. Used for transferring fuel oil at a fuel terminal. All pumps currently available can be viewed in the catalogue. Tedpfsvvlrrex Aa Isc

Condition: good (used), Wilo ILE50-170 Glanded centrifugal pump Tsdpjw Dylnefx Aa Isc Glanded centrifugal pump, with built in frequency converter for electronic control for constant or variable pressure, 8.6Kw, two in stock

Condition: new, ///// PRICE QUOTED PER 1 UNIT ///// I am offering a new industrial pump WITTE Pumps & Technology – model CHEM 1.48-14-14, designed for demanding applications in the chemical and process industries. ✅ Key information: Manufacturer: WITTE Pumps & Technology GmbH (Germany) Model: CHEM 1.48-14-14 Year of manufacture: 2022 Condition: NEW (warehouse stock) Certification: ATEX (Ex) – suitable for operation in explosive hazard zones Motor: ABB Motor power: 0.75 kW Speed: approx. 2870 rpm Protection class: IP55 Power supply: 3~ 400V / 50Hz ⚙️ Applications: chemical industry petrochemicals plastics/polymer processing dosing and transfer of process liquids ✔️ Features: robust, industrial construction high precision and efficiency Ex (ATEX) rated – safe operation in demanding environments german manufacturing quality 📦 Set includes: complete pump with motor manufacturer’s documentation ℹ️ Condition: Tedpfx Aoy Abqija Isc Device is new, unused – may show minimal signs of storage.