Round bar cutter
Manufacturer : Löser
Type : RF 430
Main engine : 11kw
Diameter range : 20 - 80 mm
The adjustable cutter head can be set to any diameter between 20 and 80 mm.
Feed rate : 0- 36 m/ min infinitely variable
Feed motor : 1,5 kw
Weight : 490 kg
With operating instructions ,wiring diagram and spare parts list
The Rundstabfraese is in an almost as good as new condition, what you can see the machine, it is still the original paint.
The cutter head with 4 knives runs ...
1 pc. used Showel Handle or Rod Milling machine
Make: Caselli / Italy
Type: similar to Cosma U 9
Round Rod Diameter: 18 – 58 mm
Performance: approx. 250 pcs. / h
Feed Rate: approx. 6 – 10 m/min
Power Consumption: 2,2 kW – 4,4 kW
Electrical Motor: 4 – 5,5 kW / 3.000 rpm
Weight: approx. 650 kg
Dimensions (LxWxH): approx. 1,20 x 1,00 x 1,70 m
Condition: REWORKED – ready to operate
new cam (for curved handle) available on reque...
I offer a quality log cutter from Bezner.
This is a very well-preserved machine.
There is also a Bezner feeder for Bezner, which was bought directly for that.
The control cabinets are part of these two machines.
All documentation (wiring and drawings) for the machines
This Oswald round bar milling line works fully automatically. The special feature of this plant is that the wood is fed at the infeed conveyor and then the complete processing including packaging is done automatically. The rounding machine can mill woods in the range of 80 to 240 mm. The plant consists of the following machines or conveyors.
Rod milling machine RM243 1403
Pull-out conveyor belt
Cross-cut and chamfering device up to 4,0 m
1100 024 OSWALD palisade plant and cut-off saw for the production of
Palisades: ø 40 - 100 mm, length 500 - 4000 mm, chamfered on one or both sides,
Half palisades: ø 40 - 100 mm, length 500 - 3000 mm, chamfered on one or both sides,
Mini palisades: ø 40 - 60 mm, length 300 mm, chamfered on one side and pointed 90° on one side,
Fence slats: ø 45 - 65 mm, length 750 - 2500 mm, 90" tapered on one side,
2. step separator
3. infeed conveyor belt
4. double head round bar mill...
FOR POLISADE PRODUCTION
PULL IN CHAIN
FRAZE RM 101-1403
PULL-OUT WITH EJECTOR
CROSSCUT ( MISSING MOTOR )
AND SEVERAL TRANSPORTERS
VERY LITTLE USED
- Machine in stock
- After the technical review
- Prepared for work
- Very good condition
TECHNICAL PARAMETERS :
- the range of workpieces 140-240 mm
- max. Diameter of the input material 360 mm
- min length of the material 700 mm
- head speed 2150 rpm
- feed speed adjustable on the geared motor
- feed motor 2,2kW
- 30 kW knife head drive motor
- diameter of the 200 mm exhaust stub
Overall dimensions of the machine:
- length 300 cm
- width 110 cm
- height 200 cm
The rounding machines in design are based on former Oswald princip with a lot of new features. The machines are build modular und can be delivered in different sizes and with different options. The machine is available as single head or double head machine. Depending on the number of heads the machine can work up to 35 m/min, with speed control system even higher. The machines are available as model series with a total range from 30 up to 400 mm.
RM 30 – 120, RM 40 – 160, RM 80 – 200, RM 100 –...
Hammer handle router / Profiled stick router Cosma
model RF 6
For economic production of straight axis profiled sticks from round,
any oval or square diameter.
Also workpieces of 2 different diameters can be produced
with gradually transition
to round circle at the other end.
The sticks can be cylindric (prismatic), conical or profiled.
Disctance between the centers 600 mm
pneumatic claming of the workpiece
capacity approx. 300 – 600 pieces per hour
motor turning speed 2800 rpm
Rounding machine tool 180-280 mm
Finished product can be rounded, half cut or bar for a house.
Also there is possibility to move rollers and head knifes to make 140 mm poles.
Video of work by request.
PULL IN CHAIN
FRAZE RM 101 WITH 2 HEAD
AUTOMATIC CAPING AND SETTING
from 40mm-100mm (120mm)
Automatic Bezner line for rounded poles production.
Rounding machine tool Bezner 50-200 mm
Also half cutter is available to install in line
For more photos and information please contact us.
The Machineseeker Trust Seal gives buyers the opportunity to see, at a glance, whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Check the address of the dealer
Validation of Bank connection
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal in your advertisements on Machineseeker. In this way, you signal to every potential buyer the seriousness of your company, checked by an independent body. This creates buyer confidence and increases the probability of successfully selling machines. In addition, you have the option of including the Machineseeker Trust Seal on your homepage and in business letters.
Try our app for used machines now!
Machineseeker app for iPhone and Android.
All information, offers and prices on this site are subject to change and non-binding!
By using this website, you acknowledge and agree to our Terms & Conditions and Privacy Statement.
Designated trademarks belong to their respective holders.
Machineseeker Group GmbH does not accept any liability for the content of linked websites.