Used Turning In Machining for sale (74,955)

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 112902, Title: Intorex CNI 1500 CNC Control Lathe - 2015 Model Description: Experience precision engineering at its finest with the Intorex CNI 1500 CNC Control Lathe, a powerhouse of machining. Manufactured in 2015, this machine embodies reliability, accuracy, and efficiency, making it an ideal addition to any workshop or manufacturing facility. Key Features: Year of Manufacture: 2015 Brand: Intorex Model: CNI 1500 Control: CNC Control Max. Turning Diameter: 300mm Diameter Tsdor Tiukjpfx Aa Iec Max. Turning Length: 1500mm Inc. Drawing and programming Software IntorEDIT (easy to use) Additional Features: Adjustable Tailstock (12 & 18mm), Round steady (90mm Dia & 140mm Dia), 2 pneumatic centerers to facilitate the loading of the pieces Applications: Ideal for precision turning operations in Woodworking / Joinery Reason for Selling: Upgrading to newer equipment. Comes with rolling cabinet for accessories and tooling

Condition: good (used), Year of construction: 2003, operating hours: 19,200 h, functionality: fully functional, We are offering a DUS 800 ti turning machine manufactured by Boehringer—built in 2003. The machine has been used in single-shift operation up to now. As shown in the photos, the machine is being sold with additional equipment (steady rest, tailstock, 800 mm faceplate with jaw sets, jaws for a 500 mm chuck, and size 4 tool holder). Tjdpfx Asz D Uqyoa Ijc Manuals for the machine are available. The DUS 800 ti is in fully functional condition and is available immediately. An inspection of the machine on power is possible at any time. Please refer to the attached document for technical specifications. The sale is on an “bought as seen” basis without warranty, Incoterms 2020 “EXW” Heubach, Germany. Responsibility for disassembly and loading on truck by buyer. The seller may provide assistance. Inspection and delivery date by arrangement.

Condition: good (used), Year of construction: 2002, functionality: fully functional, Control system: Traub TX 8i Tedpfx Aaoz Erdte Ioc Main spindle Max. bar diameter: 26 mm Max. speed: 8,000 rpm Counter spindle Max. bar diameter: 26 mm Max. speed: 8,000 rpm Tooling system Number of turrets: 2 (upper and lower turret) Tool positions per turret: 12 stations, without drive Front tool holder, 5-position, with Z3 slide, without drive Rear machining station (5 tools), without drive Bar loader: IEMCA BOSS 432/44

Condition: excellent (used), Year of construction: 2013, operating hours: 5,785 h, Okuma Genos L300e-MY turning center Year: 2013 Tjdpfszat Tvox Aa Ioc Technical details: Control OSP P300L-R Turning diameter 340 mm Turning length 1020 mm Spindle bore diameter 65 mm Spindle Speed 25 - 3000 1/min Spindle motor 15/11 kW Movement X-axis 235 mm Movement Y-axis +50 / -50 mm Movement Z-axis 1074 mm Minimum indexing C-Axis main Spindle 0,001 ° Number of tools on turret 12 Spindle speed driven tools 45 - 4500 1/min Number of driven tools 12 position Tool Taper VDI40 Spindle motor driven tools 7/3,3 kW Bar feeder SPACESAVER 2210 ( 1500 mm bar lenght, up to 67 mm diameter ) Machine dimensions 4370x2540x2490 mm Weight 7500 kg Accessories/options: - SPACESAVER 2210 barfeeder - swarf conveyor - parts cather - Renishaw tool measuring arm - Driven tool holders - Static tool holders - Hydraulic chuck - Jaws for chuck - Documentations - Dust extractor

Condition: used, Year of construction: 2001, turning diameter 220 mm Control Fanuc 18i x-travel 390 mm z-travel 435 mm tool taper VDI 40 Tedpfxjzz S R Ie Aa Ioc number of tool places 12 Pos. spindle tunring speed 4.500 U/min The machine is untested and is being sold for spare parts. Accessories, tools, and clamping devices shown are only included if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Stahl Autocast 42 x 42SP, Tilt & Pour Casting Turning Machine. S/No. 87699 36. S/No. Country of Origin: U.S.A. Tedsz Akbuspfx Aa Ijc Location: These lots are located in Warwick, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: good (used), functionality: fully functional, Internal article number: 26095 Lathe Weiler Condor 81, Type B Serial number: 84112 The machine is equipped as follows: Three-jaw chuck, Weiler 160 Base holder, Multifix "B" MK3 drill chuck Chuck guard 3-axis digital display (K&C) 4x Multifix "B" steel holders Collet set with draw tube Technical data: Center height 165 mm Center distance 750 mm Spindle speed: 22 to 2800 rpm Spindle bore 40 mm Short taper spindle head, DIN 55027, size 5 with bayonet lock Tailstock, MK 3 Feeds from 0.015 to 0.46 mm/rev Dimensions (L x W x H): 200 x 100 x 130 cm Weight: approx. 1000 kg Tsdpjz E Nxzsfx Aa Iec In good technical condition and fully functional! You are welcome to inspect the machine while it is powered on, in our heated warehouse covering an area of over 500 m².

Condition: used, Year of construction: 2018, workpiece weight (max.): 35,000 kg, total length: 15,600 mm, total height: 6,000 mm, total width: 6,000 mm, overall weight: 155,000 kg, The Pittler WMZ PV4000 / 1-2 is a heavy CNC vertical turning machine with a portal design, featuring one workpiece spindle and two independently movable tool carriers. The machine enables turning, drilling, milling, and grooving. The right tool carrier is designed as a swiveling multifunction head with a B-axis and driven tools. Two separate chain magazines provide a total of 94 tool positions. Technical Data Machine Number: ZV029 Machine Concept: Portal machine with one workpiece spindle and two tool carriers Machining Processes: Turning, drilling, milling, and grooving Maximum Swing Diameter: 3800 mm Maximum Workpiece Diameter: 3800 mm Maximum Workpiece Speed: 100 min-1 Rated Speed: 36.7 min-1 Workpiece Clamping: Manual Chuck: Röhm Tool Holder: Capto C8 Tool Magazines: 2 chain magazines Tool Positions: 2 x 47 Total Number of Tool Positions: 94 Maximum Tool Diameter: 120 mm according to the operating manual Maximum Tool Diameter: 150 mm according to the order confirmation with appropriate magazine loading Maximum Tool Length: 400 mm Maximum Tool Weight: 20 kg Travel Paths X1-Axis Right Tool Carrier: 3200 mm Tjdpfx Ajzwa Rbja Iec X2-Axis Left Tool Carrier: 2800 mm Z1-Axis Right Tool Carrier: 1000 mm Z2-Axis Left Tool Carrier: 1000 mm Rapid Traverse X-Axes: up to 32 m/min Rapid Traverse Z-Axes: up to 20 m/min Workpiece Spindle Gear Reduction: 1 to 30 Maximum Speed: 100 min-1 Rated Speed: 36.7 min-1 Rated Power: 67.4 kW Short-Term Total Power: 202.2 kW Rated Torque: 52.65 kNm Maximum Drive Torque: 71.55 kNm Torque according to Order Confirmation: 67000 Nm at 40% duty cycle Motor Spindle Power according to Order Confirmation: 200 kW at 100% duty cycle Maximum Spindle Load Capacity including Chuck, Clamping Jaws, and Workpiece: 35000 kg Spindle Flange Diameter: 1900 mm Thrust Bearing Diameter: 1400 mm The workpiece spindle is designed as a water-cooled motor spindle with precision axial deep groove ball bearings. Tool Carrier and Multifunction Head The right tool carrier features a swiveling multifunction head with two Capto C8 holders for turning tools as well as drilling and milling tools. B-Axis for Stepless Positioning Swivel Range: 180 degrees Speed of Driven Tools: up to 6000 min-1 Tool Spindle Torque: approx. 120 Nm at 100% duty cycle Hydraulic Clamping Direct Measurement System Direct Coolant Supply High-Pressure Coolant Supply: up to 70 bar Tool Magazines Two chain magazines with 47 tool positions each Tool Holder: Capto C8 Maximum Tool Diameter: 120 mm Up to 150 mm with appropriate magazine loading Maximum Tool Length: 400 mm Maximum Tool Weight: 20 kg Tool Cleaning with Blowing Air Manual Magazine Loading Coolant and Chip Disposal Two Knoll Chip Conveyors Type 600 S-2/120 Knoll Band Filter Type KF400-2300 Additional Equipment Röhm Chuck Spindle Cooling Hydac FLKS-4S Hydraulic Unit Hydac TBM20 Electrical Data Operating Voltage: 3 x 400 VAC Protection Class: IP55 Maximum Power Consumption: 280 kVA Component weight max.: 35,000 kg Swing: 3,800 mm Rotation height max.: 2,100 mm Weight approx.: 155,000 kg Dimensions (LxWxH) approx.: 15600 x 6000 x 6000 mm Table diameter: 3,800 mm Control: Siemens SINUMERIK 840D sl Year of construction: 2,018 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes

Condition: good (used), Year of construction: 2001, Ref. -No.: 10551 Manufacturer: TRAUB Type: TNC 42/65 Year of construction: 2001 Type of control: CNC-Steuerung Control: TRAUB TX Storage location: Halberstadt Country of origin: Germany Machine-No.: 93XXXXX Turning Speeds: 8000 RPM X stroke: 450 mm Turning Length: 450 mm Spindle Speeds: 4000 RPM Clamping Diameter: 42 / 65 mm Tedpezx Nx Rsfx Aa Iec Spindle Diameter In Front Bearing: 110 mm Tool Taper: 14 Max. Torque: 170 / 230 Nm Rapid Travel Speed X-Axis: 15 m / min Rapid Travel Speed Y-Axis: 6 m / min Rapid Travel Speed Z-Axis: 30 m / min Dimensions Of The Machine (Lxwxh): 4354 x 2076 x 1917 m Chisel slide cross section turning and milling support: 16 x16 ( 20 x20 ) mm Pressure: 70 bar hydraulic tank: 70 L. Total Power Requirement: 39 kVA Weight Of The Machine Ca.: 5,2 t Feed force X-axis at 100% duty cycle: 5000 N Feed path X-axis: 140 mm Z-axis feed path: 450 mm Y-axis feed path: 35 mm Ball screw Z-axis (Ø x pitch): 32 x 10 mm Ball screw X-axis (Ø x pitch): 32 x 5 mm Ball screw Y-axis (Ø x pitch): 25 x 5 mm Further information: - Revolver 1 Number of branches 10 - Revolver 2 Number of branches 14 - Hecowpkfie Htlx Tfefh - Powered tools Yes The machine can be viewed under power by arrangement.

Condition: excellent (used), Year of construction: 2007, Hardinge Talent 6/45 2 Axis CNC Turning Centre (2007) Siemens 810D Control (CCU3) Spindle Motor 11kW VDI30 Turret Tsdpoyvqdfsfx Aa Isc Spindle Speeds to 6000rpm Max. Turning Lenth 381mm Max. Turning Dia. 284mm Max. Swing over Bed 457mm X Axis Travel 228mm Z Axis Travel 406mm 2800kgs *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79161 Machine Serial Number: BLAA7E0070 Cost: £13,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 800 kg, number of slots in tool magazine: 30, controller manufacturer: Fanuc, total height: 2,700 mm, total length: 4,080 mm, total width: 2,400 mm, overall weight: 7,000 kg, table length: 1,200 mm, table width: 510 mm, controller model: Oi-MC, coolant supply: 15 bar, spindle motor power: 15,000 W, number of spindles: 1, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, spindle nose: BT40, spindle speed (max.): 12,000 rpm, table load: 800 kg, Equipment: chip conveyor, rotational speed infinitely variable, Doosan NM510 Vertical Machining Centre Machine Type: 3 Axis Vertical Machining Centre Year: 2008 Control: Fanuc Series Oi-MC Condition: Very Good Includes Swarf Conveyor Chiller MCF20 Coolant Filter Autolube 6 x Tool Holders Notes Vice and clamping block in photos not included Technical Specifications Table Size: 1200 x 510mm Table Load: 800kg Travel (X-Axis): 1020mm Travel (Y-Axis): 510mm Travel (Z-Axis): 510mm Max Spindle Speed: 12,000rpm Spindle Power: 18.5/15/11kW Spindle Taper: BT 40 Rapid Traverse (X/Y/Z): 36/36/30m/min Tool Storage Capacity: 30 tools Tool Change Time (T-T/C-C): 1.7/3.5sec Machine Dimensions: 4080 x 2400 x 2700mm Machine Weight: 7,000kg Tsdov Iq Ezspfx Aa Ijc Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2013, FEELER VB-1650 CNC Vertical Machining Centre Control FANUC 31i-TB Year 2013 Table size 800 x 1900 mm Travels XYZ 1650 x 800 x 700 mm Spindle nose to table 145-845mm Todpfx Aezd Dfisa Iec Spindle centre to column 850mm Spindle speeds to 8000 rpm Spindle taper BT 40 Spindle motor 26 kW Number of tools 30 ATC Rapid traverse X & Y 20 m/min, Z 18 m/min Weight 13000 kg Supplied wtith: Part probing, BLUM tool probe, Swarf Augers, Swarf conveyor, Spindle chiller, Filtermist FX7002. Tooling Package. For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #27002 Machine Serial Number: VHE133 Cost: £39,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 1998, operating hours: 97,593 h, functionality: fully functional, turning diameter: 65 mm, spindle bore: 79 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, For Sale: Gildemeister MF Sprint 65 CNC Sliding Headstock Lathe with 3-Meter Bar Feeder, as shown in the pictures. The machine was removed from our workshop in fully functional condition. A video of the machine in operation prior to disassembly is available upon request. Approximately five years ago, the linear guides of the X1 and Z1 slides (on the main spindle side) were replaced, including bearings and belts. A new HMI interface was installed recently. Detailed specifications and technical data can be found in the attached PDF. Todpewym Nfofx Aa Iec TECHNICAL DATA Control: Sinumerik 840C Bar Feeder: SIMAG 65.1-3200G, Year of Manufacture: 1998 Bar Length: 3 meters Bar Diameter / Spindle Bore: 65 mm Main Drive Power Output: 28 / 21 kW Speed Range: 25 – 4,500 rpm Torque: 320 / 240 Nm Maximum Feed Rate for Thread Cutting: 10 m/min C-Axis Speed: 120 rpm C-Axis Torque (Holding Torque): 180 Nm Tool Carrier Number of Tool Stations: 8 Shank Diameter (DIN 69880): 30 mm Number of Driven Tool Stations: 4 Power Output: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Maximum Speed of Tool Carrier 1: 4,000 rpm Maximum Speed of Tool Carrier 2: 4,000 rpm Slide 1 Cross Travel / Longitudinal Travel: 155 / 280 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN Slide 2 Cross Travel / Longitudinal Travel: 82 / 120 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN MACHINE DATA Dimensions with Bar Feeder and Chip Conveyor (L × W × H): approx. 6 × 2 × 2 meters Weight: approx. 6.5 tons Operating Voltage: 50 Hz, 400 V Accessories: Cooling System Chip Conveyor Documentation The offer is subject to change and non-binding, changes and errors in the technical data or the equipment, as well as prior sale reserved Used machines are purchased as seen, without warranty claims. Delivery ex works excluding packaging and insurance, unless otherwise agreed. The price does not include statutory value added tax. As is usual with used machines, payment is made before loading.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, LATHE FOR WOOD TURNING For sale is a used lathe, model Drechselmeister Twister FU 200, with a center distance of 715 mm. The machine is in very good condition. Technical data: - Center height 200 mm - Swing diameter 395 mm (700 mm with optional external turning attachment) - Center distance approx. 715 mm (can be extended optionally) - Spindle connection M33 x 3.5 with ASR (Euro) drain safety groove - Spindle and tailstock taper MK2 - Speeds (2 belt stages): 60 – 1,350 rpm and 180 – 3,750 rpm - Quill travel 100 mm (with trapezoidal thread), prepared for ER-25 drill chuck - Motor 1.5 kW / 2 hp (230 V connection) - Brake switch, 2-stage - Weight (standard version) 166 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Shipping by freight forwarder: Austria: € 95.00 incl. VAT Germany: € 120.00 incl. VAT South Tyrol: € 140.00 incl. VAT Related terms: Lathe, turning machine, wood lathe, turning, woodturning, turning tools, wood turning, machine Todpfx Aaswudkie Ioc Reference A0117

Condition: excellent (used), Year of construction: 2019, XYZ UMC-5X 5 Axis CNC Vertical Machining Centre Heidenhain iTNC 640 HSCI Control Model UMC-5X Control Heidenhain iTNC 640 HSCI X Axis Travel 600 mm Y Axis Travel 600 mm Tsdpfozi Awhox Aa Ioc Z Axis Travel 500 mm A Axis Travel +120° / -120° C Axis Travel 360° Table Size 600 mm Diameter Maximum Table Load 600 kg Spindle Speed 24,000 rpm Direct Drive Spindle Taper BBT40 Rapid Traverse 36 m/min Feed Rate 1 - 36,000 mm/min Tool Changer 60 Station Automatic Maximum Tool Length 300 mm Through Spindle Coolant 70 Bar Machine Weight 9,500 kg Machine Fitted With: Heidenhain iTNC 640 HSCI CNC Control, 24,000 rpm Direct Drive High Speed Spindle (20kW S6 Rated), 60 Station Automatic Tool Changer, 70 Bar Through Spindle Coolant, Fixed Roof for High Pressure Coolant System, Renishaw RMP600 Strain Gauge Wireless Workpiece Probe, Laser Tool Setting System, Kinematic High Accuracy Machine Setup, Kinematic Reference Ball, Thermal Spindle Compensation, Linear Scales on X, Y & Z Axes, Direct Drive C Axis Rotary Table, Swarf Conveyor & Bin. Features: Simultaneous 5 Axis Machining Centre, Gantry Frame Construction, Direct Drive High Torque Rotary Table, High Precision Linear Roller Guideways, Dynamic Collision Monitoring, High Accuracy Machine with Linear Scales, Ideal for Aerospace, Medical, Precision Engineering & Complex Multi-Sided Components. For sale with Jet Machinery Ltd Jet Machinery Stock No: TBC Machine Serial Number: TBC Cost: £120,000.00 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to inspect the machine prior to purchase. Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Technical data: Power kW 0.9 Connection 380 V/50 Hz Speed 2,900 rpm Disc dimensions 175/60/51 Weight 117 kg Equipment:  2 ATS tables (spring-mounted table) Todoza Dwxjpfx Aa Iec  2 diamond cup wheels 175x60x51 mm  Column design

Condition: used, CNC Turning and Machining Cente: Gildemeister/DMG Mori CTX2500/700 Year: 2019 Serial No.: 02620000651 2 driven spindles, rated speed 4,000/5,000 rpm, net weight 6,360 kg, accumulated operating hours 44,087 h, spindle hours: 27,832 h, cooling unit, chip conveyor, coolant treatment system, control system model: Ergoline, tool turret, 14 positions, for driven tools Tsdszwn Sgepfx Aa Isc

Condition: excellent (used), Year of construction: 2017, Sub-spindle, Y-axis, C-axis, B-axis FANUC 31i B5 NT-Smart control Turning diameter max 6400 mm Turning length -1150 mm Y-axis +/- 125 mm B-axis 1100 mm Main-spindle speeds 3'500 rpm Sub-spindle speeds 3'500 rpm C-axis positioning accuracy 0.001° Milling head B-axis -120 / +105 ° Spindlespeeds 12'000 rpm Tool changer 120 positions Todpozz I N Tsfx Aa Iec Barloader IRCO ILS-Muk-10016II Workpiece pick-up attachment Tool breakage control device 3D measuring tracer Misc. accessories MARCELS MASCHINEN CH

Condition: used, CNC turning machine TRAUB, Type TND 400 Serial No. 708, Year of manufacture 1996 CNC control TRAUB TX 8 F Nominal turning diameter: 400 mm Swinging diameter over bed: max. 470 mm Spindle bore in draw tube: 65 mm Tsdpfxjzacwdo Aa Iec Motor power, spindle drive: 22 kW Total power consumption: 35 kW Mains connection: 380 volts, 50 Hz - Electronic handwheel - RS 232 data interface - Turret with 12 tool positions, VDI 40 - Includes 8 tool holders, VDI 40 - 3-jaw chuck, Ø 225 mm, SMW Autoblok, Type KNCS-N-Ø 225-65 Includes a large quantity of chuck jaws - Hydraulic internal expanding cylinder, SMW, Type ZHDAS-130-67 - Chip conveyor, KNOLL, Type 200 S-1/600 - Coolant system - Hydraulic unit (L x W x H 650 x 500 x 1000 mm) Space requirement L x W x H: 4800 x 2000 x 2100 mm Space requirement, base machine L x W x H: 3500 x 2000 x 2100 mm Space requirement, chip conveyor L x W x H: 4500 x 700 x 1550 mm Weight: approx. 5 tons Good condition Machine is ready for demonstration. The internal expanding cylinder for workpiece clamping needs to be repaired.

Condition: excellent (used), Year of construction: 2020, operating hours: 4,800 h, functionality: fully functional, machine/vehicle number: NL154200702, Manufacturing origin: JP Voltage: 380 V / 50 Hz / 3-phase Net weight: 5,400 kg Customs tariff number: 8458.9100 TECHNICAL DATA Maximum turning diameter: 350 mm Turning length: 515 mm CNC control: M730UM MAPPS Celos Swing over bed: 923.8 mm Swing diameter above carriage: 755 mm Standard turning diameter: 260 mm Bar capacity: 34 mm Main spindle: Spindle speed range: 100 – 8,000 rpm Spindle motor power: 11 / 7.5 kW C-axis resolution: 0.001° Chuck diameter: 210 mm Tjdpfsw T Sn Eox Aa Isc Subspindle: Maximum speed: 8,000 rpm Spindle nose: A2-5 Axis travels: X-axis travel: 260 mm Z-axis travel: 580 mm Y-axis travel: 100 mm (±50 mm) Turret: Number of turret stations: 20 Driven stations: 20 Tool shank diameter: 25 mm Maximum driven tool speed: 10,000 rpm Driven tool motor power: 5.5 / 3.7 kW Feed rates: Rapid traverse X-axis: 30 m/min Rapid traverse Z-axis: 30 m/min Rapid traverse subspindle: 30 m/min Rapid traverse Y-axis: 10 m/min Rapid traverse C-axis: 400 rpm Total power requirement: 31 kVA Approximate machine weight: 5.4 t Approximate machine dimensions: 4.0 x 3.0 x 3.2 m Errors and omissions excepted – data provided without obligation.

Condition: used, Year of construction: 2008, machine/vehicle number: LV082, overall weight: 44,000 kg, Pittler PV1250 Vertical Turning Machine/Drill. Weight 44,000 kg. Condition Machine needs work. Delayed removal unit will be ready for removal by the end of September. Tsdpfjz Hb U Rex Aa Ioc Buyer responsible for removal, contractor must be licensed and insured.

Condition: good (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: M500.06133, overall weight: 15,000 kg, Emag VSC500 Vertical Turning Machine. Tedpjz Hc Nvsfx Aa Ioc Condition Good. Weight 15,000 kg. Delayed removal unit will be ready for removal by the end of September. Buyer responsible for removal, contractor must be licensed and insured.

Condition: new, Year of construction: 2026, CORMAK AT320 is a professional combination lathe and vertical milling machine designed for precision metalworking in manufacturing facilities, toolrooms, maintenance workshops, and repair shops. By integrating both a lathe and a milling machine into a single compact unit, the operator can perform complex machining operations without removing or repositioning the workpiece, significantly improving accuracy and productivity. The machine is supplied with a complete set of 16 × 16 mm turning tools and an MT3 live center. Key Features 2-in-1 machine – combines a universal lathe and a vertical milling machine in one compact, heavy-duty design. Separate induction motors for the lathe and milling machine provide maximum torque and independent operation. 38 mm spindle bore allows machining of larger-diameter shafts and bar stock. Hardened and precision-ground guideways together with a hardened gearbox ensure long service life and high machining accuracy. Thread cutting without changing change gears enables fast setup for different threading operations. Vertical milling head with ±90° tilt and 360° column rotation provides exceptional flexibility for angular and multi-sided machining. Integrated coolant system supplied as standard extends cutting tool life and improves machining performance. Construction and Technology The CORMAK AT320 is built on a rigid cast iron bed with induction-hardened and precision-ground guideways, ensuring excellent accuracy even during long carriage movements. The 1.5 kW lathe motor provides reliable performance when machining a wide range of materials, including carbon steel, stainless steel, aluminum, and brass. The vertical milling head is mounted on a round column, allowing 360° rotation and ±90° head tilt, greatly expanding the range of possible machining operations. Precision and Productivity The machine is capable of accurate longitudinal, cross, and taper turning, as well as metric and imperial thread cutting. The 12-speed lathe gearbox and 4-speed milling gearbox allow optimal selection of cutting parameters for various materials and machining operations. Standard Equipment Machine stand 160 mm 3-jaw chuck with reverse jaws MT5 and MT3 dead centers Change gears MT3/B16 drill arbor B16 drill chuck (1–13 mm) Tedporicx Sofx Aa Ijc Coolant system with pump Service tools and oil can Polish user manual CE Declaration of Conformity CE-compliant safety guards Complete set of 16 × 16 mm turning tools MT3 live center Technical Specifications Lathe Specification Value 3-jaw chuck 160 mm Swing over bed 320 mm Swing over cross slide 190 mm Distance between centers 800 mm Bed width 160 mm Spindle bore 38 mm Spindle taper MT5 Spindle speeds 12 ranges (60–1600 RPM) Longitudinal feed rates 0.1–1.4 mm/rev Cross feed rates 0.022–0.3 mm/rev Metric thread range 17 pitches, 0.5–4 mm Imperial thread range 26 pitches, 9–48 TPI Main motor 1.5 / 1.8 kW, 230 V Milling / Drilling Head Specification Value Maximum drilling capacity 20 mm Spindle taper MT3 Quill diameter 45 mm Quill travel 60 mm Head tilt ±90° Head rotation around column 360° Spindle-to-column distance 170 mm Spindle-to-table distance 45–300 mm Spindle speeds 200, 500, 900, 2200 RPM Milling motor 0.55 kW, 230 V Machine Dimensions Specification Value Overall dimensions (L × W × H) 1450 × 650 × 1890 mm Machine weight Approx. 400 kg (±2%)

Condition: ready for operation (used), Year of construction: 2011, Feeler QMP-23A 5 Axis Vertical Machining Centre Model: QMP-23A Fanuc Series Oi-MD Control Remote Electronic Hand Wheels 5 Axis Trunnion Table Travels: X: 580mm (48m/min) Y: 420mm (48m/min) Tedpfjygct Ejx Aa Iec Z: 510mm (48m/min) Spindle Nose to Table Surface: 80 – 590mm Spindle Centre to Column Surface: 510mm Table Surface to Floor 820mm Table Centre to Column Surface: 245 – 665mm GANRO TR-150S (TRS Range) Y Axis Tilting Rotary Table 150mm Capacity YOM: 2015 *For sale with Jet Machinery Ltd* Stock No: 79020 Serial No: VKC064 Price: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, overall weight: 45,000 kg, Maus MTV4LSL500 Turning Machine/Drill. Weight 45,000 kg. Delayed removal unit will be ready for removal by the end of September. Buyer responsible for removal, contractor must be licensed and insured. Tsdpfxsz Hc Npj Aa Ijc