Used wood shapers / wood routers for sale (23)

Condition: ready for operation (used), Year of construction: 2006, table width: 1,520 mm, table length: 6,200 mm, travel distance X-axis: 6,821 mm, travel distance Y-axis: 1,963 mm, travel distance Z-axis: 663 mm, controller manufacturer: BIESSE, controller model: XP600 PC-based control with Windows XP WRT, spindle motor power: 9,000 W, spindle speed (max.): 22,000 rpm, number of slots in tool magazine: 22, number of axes: 5, This 5-axis BIESSE Rover C 9.65 was manufactured in 2006. It features a working area of 6200 mm in X and up to 1935 mm in Y, with a Z-axis travel of 663 mm. The machine is equipped with a powerful 8 kW spindle and a tool changer with 22 positions. If you are looking to get high-quality CNC routing capabilities, consider the BIESSE Rover C 9.65 machine we have for sale. Contact us for further details. • Drive system X-axis: rack and pinion • Drive system Y-axis: ball screw • Drive system Z-axis: ball screw • Guide system: linear guides with recirculating ball bearing blocks • Motors: brushless motors with digital drives • Programming formats: DXF and CID3 • Main spindle type: 5 interpolating axes machining unit • Spindle power S1: 8 kW at 12000 rpm • Spindle power S6: 9 kW at 12000 rpm • Maximum spindle speed: 22000 rpm • Tool interface: HSK F63 • C-axis rotation: 360° continuous • C-axis speed: 13.5 rpm • B-axis rotation: ±100° (positioning) / ±98° (interpolation) • B-axis speed: 13.5 rpm • Z-axis feed speed: 30 m/min • Vacuum system: multi-zone vacuum with connections on both sides Nwsdozugvropfx Akijn • Vacuum pump capacity: 250 m³/h (50 Hz) / 300 m³/h (60 Hz) • Worktable: ATS system with modular supports • Number of workpiece supports: 10 • Number of module carriers: 40 • Module size: 132 x 132 x H41.5 mm • Vacuum module size: 132 x 146 x H74 mm / 132 x 54 x H74 mm • Total module height: 115.5 mm • Clamping system: vacuum and pneumatic (Uniclamp optional) • Clamping force Uniclamp: 220 kg at 7 bar • Minimum workpiece length (Uniclamp): 140 mm • Drilling unit: BH 42 L • Vertical drilling spindles: 29 • Horizontal drilling spindles: 6 (double output) • Grooving saw diameter: 120 mm • Drilling spindle speed: up to 6000 rpm • Tool changer: chain type • Tool changer capacity: 22 positions • Tool spacing: 180 mm • Max tool diameter (full load): 175 mm • Max tool diameter (single): 250 mm • Max tool length: 268 mm • Max tool weight: 7.5 kg • Total tool weight: 100 kg • Pick-up tool changer: 1 position • Max tool weight pick-up: 8 kg • Electrical supply: 380/400/415 V 50/60 Hz • Inverter for spindle: up to 14 kW • Cooling system: liquid cooling unit for electrospindles (1600 W) • Lubrication system: automatic centralized lubrication • Safety system: CE compliant with safety mats, guards and emergency stops • Chip removal: integrated chip conveyorIn 2023, the machine received a new 5-axis spindle head HS552 A HD 0S2 + ES360 F63 9 kW

Condition: used, Year of construction: 2009, Weight 10 kg Nsdpox U A Nqofx Akiewn Year ca. 2009 x

Condition: ready for operation (used), functionality: fully functional, Type: OPTIMAT F 13 Year of manufacture: 2001 Condition: function-tested, very good, used - Workpiece thickness: 16 to 55 mm - Minimum workpiece width: 30 mm - Minimum inner radius: 35 mm - Maximum edge thickness: 3 mm - 2 milling motors 0.4 kW - Extraction connection 80 mm Nodpfx Aox Rrbzokijwn

Condition: excellent (used), Industrial MXS5115A vertical spindle moulder / woodworking router table, suitable for professional woodworking shops. Ideal for profiling, grooving, edge shaping and custom milling operations on solid wood and wood-based panels. Specifications • Model: MXS5115A • Table size: 650 × 580 mm • Maximum working thickness: 120 mm • Spindle speed: 18,000 rpm • Collet sizes: 6.3 mm / 12.7 mm • Motor power: 2.2 kW • Power supply: 380 V, 3-phase Features • Heavy-duty cast iron work table • High-speed spindle for precise routing and profiling • Industrial construction • Suitable for furniture production, cabinet making and joinery • Easy adjustment and operation Condition • Good working condition. • Ready for use. • Inspection and testing are welcome. Nwodpfxjzmukuj Akijn

Condition: used, Year of construction: 2006, functionality: fully functional, MILLING PRINTING MACHINE TECNOMAX MOD. ROUTER F - Year 2006 Nwodpfex Rc Ncjx Akien

Condition: excellent (used), Year of construction: 2000, FAMOT TNFJ under-spindle milling machine Brand: Famot Model: Tnfj Description: Manufacturer: FAMOT Jvxnva Machine model/type: TNFJ Njdjy Twqyspfx Akijwn Year of manufacture: 1966 MACHINE IS A COLLECTOR’S ITEM AFTER A COMPLETE OVERHAUL FAMOT MILLING MACHINE AFTER A COMPLETE OVERHAUL, NEW ELECTRICAL SYSTEM, NEW ELECTRICAL INSTALLATION, INTERCHANGEABLE SPINDLE FOR MORSE TAPER MACHINE. OVERALL CONDITION VERY GOOD. NEW MILLING MACHINE GUARD WITH NEW SUPPORT PLATES. THE MACHINE CAN BE USED AS A GRINDER. Year: 2000

Year of construction: 1976, condition: ready for operation (used), I sell the tenoning machine for parallel grooving for the bands in the pallets production, or some other similar product. WACO T2-SL Year 1984. Groove width 30mm. Nsdjh Hp U Sopfx Akiewn Motor 3,3kW Made in Germany. Available immediately. Including documentation.

Condition: used, Year of construction: 1998, functionality: fully functional, SECOND-HAND HIGH SPEED VERTICAL MILLING MACHINE CAMAM MOD. FV/1T-1P Nwedjx Rdhtepfx Akien - Volt. 380/50 - CE rules - Year 1998

Condition: ready for operation (used), Year of construction: 2021, total width: 5,851 mm, travel distance X-axis: 3,140 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 245 mm, overall weight: 3,000 kg, controller manufacturer: BIESSE, controller model: HH660 PC-based control, spindle motor power: 13,200 W, product length (max.): 7,116 mm, spindle speed (max.): 24,000 rpm, number of axes: 4, This 4-axis BIESSE Rover A 1232 was manufactured in 2021. It features a working area of 3140 mm in the X-axis, 1260 mm in the Y-axis, and a Z-axis travel of 245 mm. The machine is equipped with an electrospindle power of 13.2 kW and a maximum tool diameter of 113 mm. If you are looking to get high-quality CNC routing capabilities, consider the BIESSE Rover A 1232 machine we have for sale. Contact us for further details. • Power supply voltage 400 VAC • Full load current 31.7 A • Number of power supply phases 3 • Installed power 18.66 kW • Frequency 50 Hz • Short circuit protection rating 10 kA RMS Sym • Working area X 3140 mm • Working area Y 1260 mm • Working area Z 245 mm Nwodpfx Akezugwpjien • Max panel thickness: depends on vacuum module height (H74 / H29) and tooling • Workpiece support length 1200 mm • Vacuum pump capacity 90 m³/h • Vacuum pump capacity 108 m³/h at 60 Hz • Vacuum system dry pump • Electrospindle power 13.2 kW • Electrospindle speed 12000 to 15000 rpm S1 • Electrospindle speed 12000 to 24000 rpm programmable • Tool holder HSK F63 • Rotation clockwise and counterclockwise • Two separate magazines installed: • 8-position tool magazine (rear / Y-axis area) • 13-position tool magazine (main X-axis unit) • Maximum tool diameter 113 mm • Maximum tool length 110 mm • Maximum tool weight 7.5 kg • Maximum total magazine weight 32 kg • Vacuum system:Configurable vacuum pump system. Available configurations include:– 2 × 90 m³/h– 2 × 100 m³/h– 1 × 250 m³/h

Condition: used, SECOND-HAND COPYING ROUTING SHAPER AND SANDER WITH 3 SIDES CABIN Nwedpfxswrh E Es Akijn - 1 shaping unit - 1 shaping unit - Max. working diam. 800 mm.

Condition: ready for operation (used), Year of construction: 2009, CNC router manufactured in 2009. This MECANUMERIC Pro 3015 has been very lightly used, with a total operating time of just 1,369 hours. The machine is in very good mechanical condition, although the spindle bearings will need replacement. It is currently connected to power and can be tested until approximately the end of September 2026. If you are looking to get high-quality routing capabilities, consider the MECANUMERIC Pro 3015 machine we have for sale. Contact us for further details. • Usage: very lightly used • Total operating hours: 1,369 h • Mechanical condition: very good • Maintenance note: spindle bearings need to be replaced Nedpfx Aez Arwkekijwn • Power/test status: currently connected to power and can be tested • Testing availability: testing expected to be possible until approximately end of September 2026

Condition: used, used, good conditionmake Haffnertype SL 100machine no. 3811upright machinechain setdoor supportpusher hole motorforend motorlubricatorspace requirement approx. 1200 x 700 x 2000 mmweight approx. 300 kgstorage location 97447 Gerolzhofen, free loaded, unpackedhandover in actual condition as inspected,without guarantee and warranty Nwsdpfsvxr R Hsx Akien

Condition: used, Year of construction: 1995, machine/vehicle number: 1/95, SECOND-HAND COPYING ROUTING CARROUSEL WITH 6 WORKING STATIONS CAMAM MOD. GC6/4F/1L - Double locking cylinder on each working station Nodpfxjqmnidj Akiswn - 1 inside/outside milling unit - 1 inside milling unit - 1 ouside milling unti - 1 outside sanding unit - 4 sides cabin with roof - Kw 28 - Year 1995

Condition: used, Year of construction: 1995, functionality: fully functional, Comec FT-CD-CA-650 end-milling machine Nedpfx Akoz D H Ecoiown Number of milling heads per side: 1 Length of workpieces: approximately max/min 650-220mm Automatic material feeding from a feeder Operation based on templates

Condition: used, usedmake Haffnertype SL 100upright machinedoor supportworkpiece supportpusher hole motorforend motorlubricatormechanical workpiece clampingstorage location 97447 Gerolzhofen, free loaded, unpackedhandover in as-is condition as inspected,without guarantee and warranty Nwedpfovxr R Tex Akijn

Condition: used, Year of construction: 1998, machine/vehicle number: 9813, SECOND-HAND SPINDLE MOULDER SAC MOD. TS 110 - CE RULES - Working table mm. 2400 - Volt 400/50 - S/N 9813 - Year 1998 Njdpowrh Hvsfx Akiewn

Condition: ready for operation (used), Year of construction: 2008, The Balestrini CP 100 (manufactured in versions such as CP 100/6 or CP 100/8) is an industrial, multi-spindle wood profiling and copying machine. It is used for precise shaping and copying of curved components. It is typically used in the production of chairs, bent furniture, and door and window frame elements. Technical specifications: Construction: The machine is equipped with several working units (heads) that operate simultaneously based on copying templates. Nwjdpszbc Rtjfx Akien Drives: Main motors with power usually exceeding 2.9 kW (up to 10 HP depending on the configuration), often powered by 380-400V. Working equipment: It features tables with adjustable angles in two planes and a pneumatic clamping system that ensures the stability of the workpiece. Parameters: The machine allows for milling components with a length often exceeding 2000 mm in larger versions. The weight ranges around 900 kg.

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 4,250 mm, travel distance Y-axis: 2,280 mm, travel distance Z-axis: 150 mm, overall weight: 6,300 kg, spindle motor power: 18,000 W, spindle speed (max.): 24,000 rpm, number of axes: 3, This 3-axis SCM Accord 20 CNC router was manufactured in 2010. It features a working area with dimensions of 4250 mm in the X-axis and 2280 mm in the Y-axis, making it suitable for nesting production and wood processing. The machine includes a powerful electrospindle with a speed range of 600 to 24,000 rpm and a side tool magazine with 10 positions. If you are looking to get high-quality milling capabilities, consider the SCM Accord 20 CNC router we have for sale. Contact us for further details. • Typical applications: nesting production; windows and doors manufacturing; stair components production • Table size (L x W): 4200 x 2300 mm • Controlled axes: 3 (X, Y, Z) • Axis drives: Brushless motors • Rapid traverse: X 75 m/min; Y 75 m/min; Z 15 m/min • Lubrication: Automatic central lubrication system • Work table: Nesting table; large-format multifunctional aluminum matrix; pressed aluminum construction mounted directly to the base; designed for vacuum clamping of large panels • Main spindle: 1 electrospindle, HSK F63 tool holder; 600–24,000 rpm; 11 kW inverter; up to approx. 18 kW in working range (12,000–18,000 rpm); CW/CCW rotation; air cooling with fan; pneumatic tool clamping • Tool changer: Side tool magazine TR-10; 10 positions; 130 mm spacing; max 8 kg per position; automatic tool change • Workpiece clamping: Vacuum (nesting table); 2 vacuum pumps, 250 m³/h each • CNC control: SCM PC control • Software: Xilog Maestro; Xilog Plus; graphic programming editor; DXF import; subprogram and macro management • Electrical: 400 V; 50/60 Hz • Construction: Heavy welded gantry; high-rigidity industrial frame; aluminum matrix table mounted directly to the base Nsdpfszug Hwox Akijwn • Safety: Fixed safety fencing on two sides; CE marking • History/condition: One owner since new; used continuously in one company; regularly serviced; technical condition very good Additional equipment • Automatic dust extraction hood

Condition: used, Year of construction: 1997, SECOND-HAND SPINDLE MOULDER GRIGGIO MOD. T220 - CE RULES Nodpfx Akswrh Iysiewn - Year 1997

Condition: used, Year of construction: 2002, machine/vehicle number: 02010, SECOND-HAND COPYING ROUTING SHAPER FOR CORNER BLOCKS BERMAQ MOD. C.T.C. - CE RULES - Boring unit - Spindle moulder - S/N 02010 - Year 2002 Nodpfjua Aztox Akijwn

Condition: used, SECOND-HAND DOUBLE SIDED ROUND END TENONER BALESTRINI TTSA - Automatic loader - Control panel Nodpfx Aswrh N Dskiswn - Min / max working length 240/1200 mm - Maximum tenon size 100x30 mm - Production: 1200 tenons/hour (600 pieces/hour) - Tool rotation 9,000 rpm - Total installed power 9 kw

Year of construction: 1997, condition: used, SECOND-HAND COPYING CAROUSEL CAMAM GC6/4F-4L Nsdpfehz Dlbsx Akiown - 2+2 milling units (roughing and finishing) - 2+2 sanding units (roughing and finishing) - pneumatic locking cylinders - n.6 working stations - with cabin - Control panel - volt. 380/50 - S/N 73 - CE rules (year 1997)

Condition: used, Year of construction: 2003, SECOND-HAND DOUBLE SIDED ROUND END TENONER BACCI TYPE TSD-E - CE RULES - Working length mm. 1200 - Max tenon length 100 mm - Production: 2400 tenons/hour (1200 pieces/hour) - Tool rotation 9,000 rpm - Tenoning units motors (n.2) 8 hp (4hp cad.) - With loader CSF Nwodpfx Aemxktpskion - Volt. 380/50 - S/N 772 - Year 2003