Used Bar Machining Center for sale (76,360)

Year of construction: 2005, condition: excellent (used), functionality: fully functional, elumatec SBZ150 Profile Machining Centre 6.0 m 5-axis control. Efficient machining of aluminium and steel profiles Working length: 6,000 mm Description: Short tool change times; Automatic tool changer for eight standard tools and three special tools (saw blade, special milling cutter diameter 50 mm, angle head or special milling cutter diameter max. 100 mm); Six-sided machining; Underside machining with angle head (option); Rapid base positioning (up to 60 m/min) of the processing unit in the X-axis; Low-wear direct drive; With automatic clamp detection and positioning; Dual-circuit clamping system with two pneumatically retractable stops; Standard with automatic central lubrication system; Robust machine bed for a working length of 6,000 mm; Continuous support table; Clamping system with integrated six-row recirculating roller units and linear guides. 5-axis industrial PC control, with 3 axes for path control; High-dynamic three-phase servo drives with resolver and digital servo controller; Swivel angles of the A and C axes freely programmable; Dwodpfx Asw A Rv Ijcysd With color screen and disk drive; Memory capacity of over 200,000 sets; 3 serial and 1 parallel interface for online connection; Barcode scanner, label printer, etc. Integrated network card 10/100 MBit, RJ 45 port (network connection by customer’s IT administrator) Analog modem (customer must provide an analog telephone line) Technical data: Travel range X-axis: max. 6,240 mm Max. travel speed 60 m/min. Travel range Y-axis: 1,000 mm Max. travel speed 30 m/min Travel range Z-axis: 635 mm Max. travel speed 30 m/min. Swivel angle A-axis: 0-90° freely programmable Swivel angle C-axis: 0-355° freely programmable Further details on the milling range see drawing no. 150 05 17 08 Max. processing length for face machining left + right: 6,000 mm (with tool length 150 mm) Positioning accuracy: X-axis +/- 0.1 mm / 1 m length Y-axis +/- 0.1 mm Z-axis +/- 0.1 mm Milling spindle: Speed [rpm]: up to 100–22,000 Power [kW]: 15 Tool holder: HSK-F 63 Milling cutter diameter: 100 mm max. Saw blade diameter: 400 mm Tool length: max. 150 mm from nominal taper. Included accessories: Automatic tool changer (without tool holders); Dual-circuit clamping system with 2 pneumatically retractable material stops; Automatic clamp detection and positioning; 8 horizontal pneumatic material clamping units; Tool presetting gauge Front light barrier Saw blade D400 with mount Angle milling head Important: The profile machining centre is fitted as standard with front light barriers. Any necessary side or rear guarding must be supplied on-site by the customer or please request an offer for safety fences from us. Incl. Angle milling head for underside machining

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, working width: 1,050 mm, working height: 100 mm, working length: 3,250 mm, TECHNICAL DETAILS Working length: 3,250 mm Working width: 1,050 mm Working height: 100 mm Djdpfx Ace Aggu Ajyowd Drilling unit Vertical drilling spindles: 18 Horizontal drilling spindles, X-axis: 4 Horizontal drilling spindles, Y-axis: 2 Tool stations: 4 Position: rear MACHINE DETAILS Milling spindle power: 7.5 kW Operating voltage: 400 V Mains frequency: 50 Hz EQUIPMENT Grooving circular saw for X and Y direction, 90° Rear tool changer CE marking

Condition: excellent (used), functionality: fully functional, machine/vehicle number: BJ9-002-042, travel distance X-axis: 560 mm, travel distance Y-axis: 355 mm, travel distance Z-axis: 355 mm, controller model: Hurco Ultimax, spindle speed (max.): 6,000 rpm, Equipment: documentation/manual, TECHNICAL DETAILS X-axis travel: approx. 560 mm Y-axis travel: approx. 355 mm Z-axis travel: approx. 355 mm Table length: approx. 760 mm Table width: approx. 355 mm Spindle speed: up to 6,000 rpm Tool holder: SK40 / CAT40 Main motor power: approx. 7.5–10 HP Tool positions: 16 Rapid traverse: approx. 10 m/min MACHINE DETAILS Control system: Hurco Ultimax Machine weight: approx. 3,200 kg EQUIPMENT Dodpfx Acs Afwwbsyowd 16-position tool changer Various accessories

Year of construction: 2014, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1400040685, Special Features: Retrofit to WIN10 – NEW – with 6 months warranty on computer and UPS Water-cooled spindle, 9.5 kW S1 3-layer machining possible Carefully cleaned and overhauled – excellent condition Description: Graphical operator guidance and graphical service support A-axis for stepless machining from above – swivel angle 180° HSC milling spindle for speeds up to 24,000 rpm Large machining width Standard with clamping detection and automatic clamp positioning 8 tool stations Complete profile machining with stationary profile bar Rapid basic positioning of the machining unit (up to 64 m/min) on the X axis Robust, low-wear direct drive Protective hood Digital axis controllers for all 4 axes with high-resolution measuring system 4-axis industrial PC control 2 1/2 D interpolation 15" TFT color screen Network connection RJ45 10/100 MBit Hard disk Full PC keyboard Remote maintenance via TCP/IP (requirement: internet access) Technical Specifications: Max. machining length without frontal machining: 7,600 mm Max. machining length with frontal machining: 7,500 mm (tool-dependent) Travel X-axis: 7,700 mm Travel speed X-axis: 65 m/min Travel Y-axis: 850 mm Travel speed Y-axis: 60 m/min Travel Z-axis: 650 mm Travel speed Z-axis: 60 m/min Swivel angle A-axis, freely programmable in 0.1° increments: 0 - 180° Positioning accuracy: X-axis: +/- 0.1 mm / 1 m Y-axis: +/- 0.1 mm Z-axis: +/- 0.1 mm A-axis: +/- 0.1° Max. spindle speed: 24,000 rpm Max. spindle power: 9.5 kW S1 Tool holder: HSK F 63 Max. cutter diameter: 80 mm Max. milling cutter diameter: 200 mm Compressed air connection: > 7 bar Voltage: 400 V, 3 PH, 50 Hz Fuse: 35 A 8 tool stations Included Accessories: Tool setting gauge 8 pneumatic material clamps Automatic clamp detection Dosing spray device Protective hood Front light barrier Side safety fences (left and right) Central chip extraction 2 pneumatic material stops 3-circuit clamping system Length measurement for profile bar Barcode scanner with wireless transmission Special version with light barrier Additional options available on request: Programming software (office) eluCad, incl. hotline contract for 6 months Dwsdpfxoy Ah Tko Acyed 3D import license for one machine of category "L" Data import license package for one machine of category "L" CSV import license for one machine of category "L" Macro hashing license for one machine of category "L" Other information: The machine is delivered ready for transport, including transport locks, loaded onto truck Additionally, we optionally offer the following services on request: Installation and commissioning Machine training 4/5-axis training package for machine and eluCad

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 2190, functionality: fully functional, operating hours: 3,500 h, 5 axis cnc used for many applications with new touch screen set up and adopted to new air cooled spindle, tool changer and renishaw possible Dedpfszhaqcjx Acyowd

Condition: excellent (used), Year of construction: 2004, operating hours: 5,238 h, functionality: fully functional, machine/vehicle number: 120007, travel distance X-axis: 1,200 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 750 mm, controller model: Heidenhain TNC 530, spindle speed (max.): 8,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 1,200 mm Y-axis travel: 700 mm Z-axis travel: 750 mm Spindle speed: max. 8,000 rpm Dwjdo Afwxzepfx Acyed MACHINE DETAILS Control system: Heidenhain TNC 530 Operating hours: Spindle hours: 5,233.8 h Machine operating hours: 13,455 h Control system operating hours: 17,705 h

Condition: good (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,016 mm, travel distance Y-axis: 559 mm, travel distance Z-axis: 660 mm, controller manufacturer: Milltronics, controller model: Centurion 7, total height: 2,740 mm, total length: 3,050 mm, total width: 2,440 mm, table width: 610 mm, table length: 1,016 mm, overall weight: 7,250 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 18,000 W, spindle nose: CAT 40, number of spindles: 1, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, 2007 Milltronics VM22 CNC Vertical Machining Centre Used 2007 Milltronics VM22 vertical machining centre for sale. Centurion 7 control, 1016 x 559 x 660mm travels, 8,000 rpm spindle, 24-tool ATC and tooling included. Manufacturer: Milltronics Model: VM22 Machine Type: 3 Axis Vertical Machining Centre Year: 2007 Control: Centurion 7 Includes: Large Selection of Tool Holders Machine Description Used 2007 Milltronics VM22 CNC Vertical Machining Centre available for sale. A substantial American-built 3-axis vertical machining centre offering a generous working envelope, 24-station automatic tool changer, 8,000 rpm spindle and the well-established Milltronics Centurion 7 CNC control. This particular machine is a VM22 Series B and is supplied with a large selection of tooling, making it an attractive package for general precision engineering, subcontract machining, toolroom work, mould work and batch production. The VM22 provides approximately 1,016mm X-axis travel, 559mm Y-axis travel and 660mm Z-axis travel, combined with a large 1,143 x 610mm table. Technical Specifications Manufacturer: Milltronics Manufacturing Company Model: VM22 Series: B Year: 2007 Machine Type: CNC Vertical Machining Centre / Vertical CNC Milling Machine Control: Milltronics Centurion 7 Number of Axes: 3 Serial Number: 9868 Dedsz Rqcyjpfx Acyjwd Axis Travels X-Axis Travel: Approx. 1,016mm / 40" Y-Axis Travel: Approx. 559mm / 22" Z-Axis Travel: Approx. 660mm / 26" The 40" x 22" x 26" working envelope is one of the defining specifications of the VM22. Worktable Table Size: Approx. 1,143 x 610mm / 45" x 24" The large table and 22" Y-axis travel provide useful capacity for larger components, multiple vices and production fixtures. Spindle Maximum Spindle Speed: Approx. 8,000 rpm Spindle Power: Approx. 24 HP / 18kW peak rating Spindle Taper: 40 Taper / CAT40-type specification The combination of a 40-taper spindle and substantial machine construction makes the VM22 suitable for both general milling and heavier material-removal work. Automatic Tool Changer Tool Capacity: 24 Tools The machine is equipped with a 24-position automatic tool changer, providing sufficient tooling capacity for multi-operation machining without frequent manual tool changes. Milltronics Centurion 7 CNC Control The machine is equipped with the Milltronics Centurion 7 CNC control. The Centurion series became particularly popular in toolrooms and general engineering companies because of its conversational programming capability while still supporting conventional CNC/G-code programming. This makes the machine particularly suitable for: One-off components Small-batch machining Toolroom work Subcontract machining Prototype manufacture Production milling Operators transitioning from manual to CNC machining Tooling Included A large selection of tooling is included with the machine. Electrical Specification Input Voltage: 400V Phase: 3 Phase Frequency: 50/60Hz Full Load Current: Approx. 50A Largest Load: Approx. 40A Approximate Machine Size & Weight Machine Length: 3,050mm Machine Width: 2,440mm Machine Height: 2,740mm Approximate Machine Weight: 7,250kg

Condition: good (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, controller manufacturer: Mazatrol, controller model: Smooth G, workpiece weight (max.): 1,200 kg, total height: 2,810 mm, total length: 3,650 mm, total width: 3,100 mm, table width: 550 mm, table length: 1,300 mm, table load: 1,200 kg, rotary table diameter: 200 mm, overall weight: 6,800 kg, spindle speed (min.): 35 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 15 bar, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, CNC Vertical Machining Center from Mazak VCN 530C with Kitagawa MR200 table from 2018. Technical details: CNC Control: Mazatrol Smooth G Machine tablesize: 1300 x 550 mm X-axis travel: 1050 mm Y-axis travel: 530 mm Z-axis travel: 510 mm Spindle speed: 35 - 12.000 rpm Spindle: SK40/DIN 67871A Spindle motor: 18.5/11 kW Positions in tool magazine: 30 Dedpfxj Aidzdj Acyowd and equipped, among other things, with - Chip conveyor belt left - Cooling by the spindle 15 bar - Kitagawa NC Rotary table MR 200 - Spindle total time 3.454 hours If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, WILLEMIN MACODEL 408S2 is a Machining and turning center from bar with high precision, superior accuracy and reliability. Travels X 250 mm, Y 200 mm, Z 310 mm; B axis -100°/+30°; resolution 0.0001; bar capacity Ø32 mm; tool magazine 24 positions; tool length 95 mm, max weight 1 kg; tool change 0.8 s; Ø with free adjacent pockets 80 mm. Spindle nose HSK E-25, stepless up to 75'000 t/min; voltage 50 Hz 3x400 V; total power 16 kVA; machine weight ~2300 kg; footprint L1840 x W2450 x H1385 mm. Equipment: Renishaw OMP 40-2 touch probe, BLUM Nano NT tool break control, coolant system, oil mist extractor, coolant filter, fire extinguishing system. Delivers tight tolerances; ideal for watchmaking, medical, aerospace, automotive and tooling. Djdpfx Acezqbhbeyewd

Condition: excellent (used), Year of construction: 2010, operating hours: 32,300 h, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, nominal power (apparent): 11 kVA, controller manufacturer: Hurco, controller model: WINMAX, workpiece weight (max.): 340 kg, table width: 356 mm, table length: 762 mm, table load: 340 kg, overall weight: 2,900 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 32,300 h, spindle motor power: 11,000 W, spindle nose: CAT 40, number of spindles: 1, number of slots in tool magazine: 20, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, 2010 Hurco VM10 CNC Milling Machine with CAT 40 Spindle, WINMAX Control 2010 Hurco VM10 Vertical Machining Centre with WINMAX CNC Control, CAT 40 spindle, 20-tool ATC and premium software package. Good condition. Delivery throughout Ireland, UK & Europe. Manufacturer: Hurco Model: VM10 Machine Type: 3 Axis Vertical Machining Centre Year: 2010 Hours: 32,300hrs Control: WINMAX Condition: Excellent For sale is a 2010 Hurco VM10 Vertical Machining Centre in good working condition, equipped with the renowned Hurco WINMAX CNC Control (Version V08.01.04.33) and a CAT 40 10,000rpm spindle. The Hurco VM10 is recognised worldwide as one of the most reliable and user-friendly vertical machining centres for precision CNC milling, toolroom machining, prototype manufacture, small batch production, mould making, and general engineering. With 32,300 machine hours, this machine remains an excellent opportunity for engineering companies looking for an affordable, high-quality used CNC machining centre from one of the industry's most respected manufacturers. Please note: No tooling is included with the machine. Technical Specifications Manufacturer: Hurco Model: VM10 Year: 2010 Machine Type: Vertical Machining Centre CNC Control: Hurco WINMAX Mill V08.01.04.33 Machine Hours: 32,300 Hours X Axis Travel: 660 mm Dsdpfx Ajziu Hzecyewd Y Axis Travel: 406 mm Z Axis Travel: 508 mm Table Size: 762 × 356 mm Maximum Table Load: 340 kg Spindle Taper: CAT 40 Spindle Speed: 10,000 RPM Spindle Motor: 11 kW (15 HP Peak) Automatic Tool Changer: 20 Station ATC Rapid Traverse (X/Y/Z): 24 m/min Machine Weight Approx.: 2,900 kg Condition: Excellent Working Condition Tooling: No Tooling Included Installed WINMAX Software Options This machine is equipped with an excellent range of factory software options including: Advanced Verification Graphics DXF File Import NC Productivity Package Industry Standard NC Programming UltiPockets Rigid Tapping Helical Ramp Milling 3D Mold Package NC Conversational Merge Swept Surface Machining Select Surface Finish Quality These options significantly enhance programming flexibility, machining accuracy and production efficiency, making the VM10 suitable for both conversational programming and full ISO/G-Code machining. Notes: *Specifications are given in good faith but not guaranteed* Key Features Hurco WINMAX Conversational CNC One of the easiest CNC controls to learn and operate, allowing operators to quickly produce components without extensive G-Code programming. CAT 40 High-Speed Spindle The industry-standard CAT 40 spindle provides excellent tooling availability and rigidity for machining steel, aluminium, plastics, composites and engineering materials. 20 Station Automatic Tool Changer Fast automatic tool changes reduce machining time and improve production efficiency. Compact High-Performance Design Large machining travels combined with a compact footprint make the VM10 ideal for workshops where floor space is at a premium. High-Speed Precision Machining The 10,000 RPM spindle combined with rapid traverse rates enables efficient production while maintaining excellent surface finishes. Proven Hurco Reliability Hurco machining centres are recognised worldwide for their durability, ease of maintenance and excellent resale value. Machine Condition: Excellent Condition Fully operational Ready for immediate production No tooling included in sale Inspection welcome

Condition: like new (used), Year of construction: 2022, operating hours: 761 h, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 250 mm, controller manufacturer: Makino Professional 6, controller model: FANUC FS31i-B, spindle speed (max.): 30,000 rpm, operating hours of spindle: 761 h, spindle nose: HSK-E50, number of slots in tool magazine: 20, Equipment: chip conveyor, documentation/manual, MAKINO D200Z Dwjdpfx Aj Ah D Twjcyjd Makino Professional 6 (FANUC FS31i-B) Professional 6 Version X-axis 350 mm Y-axis 300 mm Z-axis 250 mm B-axis (swivel range) 180° (0° – 180°) C-axis (rotation angle) 360° continuous Distance table surface – spindle center 160 – 410 mm Table Max. load capacity 75 kg Max. workpiece size (Ø × H) 300 mm × 210 mm (with restrictions) Chuck EROWA Speed range 100 – 30,000 min⁻¹ Drive power (25 % ED / continuous) 15 kW / 11 kW Torque (25 % ED / continuous) 23.8 Nm / 21 Nm Interface HSK-E50 Positioning accuracy X/Y/Z (with linear scales) ± 0.0015 mm Repeatability X/Y/Z ± 0.0010 mm Positioning accuracy B/C-axis ± 2.0 s Repeatability B-axis / C-axis ± 2.0 s / ± 1.0 s Tolerances measured at the manufacturer’s plant with appropriate foundation and daily temperature fluctuations of max. ± 1 °C. Capacity 20 tools Max. tool weight 3 kg Max. tool dimensions Ø 50 mm (without restrictions) / Ø 80 mm (with restrictions) Max. tool length 200 mm Interface HSK-E50 Connected load 40 kVA Compressed air 5 – 8 bar, max. 500 l/min 2,300 × 1,868 × 3,030 mm 4,600 kg Spindle with 30,000 rpm, HSK-E50 interface Rigid tapping Table with EROWA / System 3R chuck (DD motor), high-precision bearings Linear scales (X, Y, Z) Tool changer with 20 pockets (ATC 20), HSK interface Collision Safeguard (CSG) Robot door, loader interface (A-type) Chip conveyor with drum filter and downstream cyclone filter Flushing channel, air blower, coolant nozzles at spindle nose Fully enclosed work area, safety-guarded operator door Portable hand pendant Super GI.5 control, High-speed smooth TCP, GI-Smoothing Tool center point control (G43.4, G43.5) for simultaneous 5-axis machining 3-dimensional cutter compensation, tilted working plane Dynamic fixture compensation for rotary table, VP control Adaptive control (AC Control), energy saving function 2 GB part program memory, Data Center 1 GB, 1,000 programs Tool compensation memory: 400 offsets, type C 54 workpiece coordinate systems (6 + 48) User macro programming with 1,100 variables MRDF sensor (Machine Relocation Detection Function) EROWA Power Chuck Loader interface (A-type) instead of (L-type) Coolant temperature control unit (constant coolant temperature, with heating) Workpiece wash gun (operator side) Coolant shower Connection for oil mist extraction (Ø 125 mm) Air dryer Tool length measurement by BLUM laser, incl. tool breakage detection 3-coordinate touch probe Blum TC62 (measuring uncertainty approx. 0.005 mm, radio transmission, 14 automatic measuring cycles, incl. gauge block for C-axis pivot point) i-Set-up (additional operator panel for easy workpiece alignment) MML interface (fast Ethernet card) Network integration Remote diagnostics setup (VNC/EDM viewer, installation and training) OPC UA interface for Professional 6 (35 readable tags) Tool retract and re-approach function 3D model of the working area

Condition: ready for operation (used), Year of construction: 2014, machine/vehicle number: AA2/002546, functionality: fully functional, travel distance X-axis: 7,033 mm, travel distance Y-axis: 1,940 mm, travel distance Z-axis: 475 mm, spindle speed (max.): 24,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of milling spindles: 1 Number of controlled axes: 5 Spindle speed: max. 8,000 rpm Main motor power: 11 kW Dwedps Aidx Hsfx Acyod C-axis: Available Tool holder: HSK-F63 Table design: Cantilever table Table length: 5,200 mm Table width: 1,300 mm Working area X-axis: 6,350 mm Working area Y-axis: 1,300 mm Working area Z-axis: 200 mm Travel range X-axis: max. 7,033 mm Travel range Y-axis: max. 1,940 mm Travel range Z-axis: max. 475 mm Drilling tool: Available Motor power: 3 kW Horizontal drilling spindles: 6 Vertical drilling spindles: 10 Tool changer positions: 24 MACHINE DETAILS Vacuum pump: Becker VTLF 250 Year of manufacture: 2008 Main motor power: 5.5 kW Capacity: 300 m³/h Connection diameter: 70 mm Oil-free: Yes Voltage: 400 V Current consumption: 64 A Dimensions & Weight Dimensions (L x W x H): 10,300 x 2,450 x 2,800 mm Installed length: 11,000 mm Installed width: 3,900 mm Installed height: 3,000 mm Transport weight: 6,600 kg Transport packages: 1 EQUIPMENT Tools CE marking

Condition: good (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: SEICOS Σ10M / A10M, table load: 750 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: approx. 760 mm Y-axis travel: approx. 500 mm Z-axis travel: approx. 500 mm Table length: approx. 1,120 mm Table width: approx. 485 mm Table load capacity: max. approx. 750 kg Spindle speed: typically up to 8,000 rpm Tool holder: SK40 Number of tool positions: 30 MACHINE DETAILS Dwedpfx Acj Afwvljyod Control system: SEICOS Σ10M / A10M Machine weight: approx. 6,500 kg

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, overall weight: 6,000 kg, controller model: Xilog Plus, working width: 1,300 mm, spindle speed (max.): 24,000 rpm, working height: 80 mm, working length: 3,000 mm, TECHNICAL DETAILS Working area X: 3,000 mm Working area Y: 1,300 mm Djdpfx Ae Ah Rk Necyjwd Working area Z: 80 mm Independent CNC drilling heads: 2 units Main drilling head Vertical spindles X: 15 units Vertical spindles Y: 19 units Horizontal spindles X: 4 units Auxiliary drilling head Vertical spindles X: 11 units Vertical spindles Y: 3 units Horizontal spindles X: 4 units Upper milling unit Milling power: 6.6 kW Tool holder: HSK-F63 Speed: 24,000 rpm Lower milling unit Milling power: 6.6 kW Tool holder: HSK-F63 Speed: 24,000 rpm MACHINE DETAILS CNC control: Xilog Plus EQUIPMENT Additional horizontal spindles Integrated drilling heads for concealed hinge systems DXF import Parametric programming Tool management Automatic workpiece thickness measurement Patented CNC workpiece clamping system Automatic workpiece repositioning Automatic central lubrication Loading and unloading table

Year of construction: 2001, condition: repair required (used), Pictures to follow - machine is being overhauled Dsdpfjt Ea Tfjx Acyowd Technical data: - X-axis travel: 7300mm - Y-axis travel: 1000mm - Z-axis travel: 650mm - Swivel angle A-axis: 0-90° freely programmable - Swivel angle C-axis: 0-355° freely programmable - Max. Machining length without end face machining: 7300mm - Max. Machining length with end face machining: 6980mm - Tool changer with 10 places and a saw blade holder - 9 material clamps - SK30 tool holder - 2-layer machining

Condition: used, Year of construction: 2011, travel distance X-axis: 520 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 360 mm, controller model: FANUC 31i-A5, spindle speed (max.): 10,500 rpm, TECHNICAL DETAILS X-axis travel: 520 mm Y-axis travel: 360 mm Z-axis travel: 360 mm Distance from spindle nose to table: 200–560 mm Rapid traverse rate X/Y/Z: 60 m/min Spindle speed range: 36–10,500 rpm Spindle power: 30–35 kW Tool holder: HSK-A63 Number of pallets: 2 Pallet load: max. 450 kg Magazine capacity: 2 × 21 Tool diameter: max. 88 mm Tool diameter with free neighboring positions: max. 125 mm Tool length: max. 250 mm MACHINE DETAILS CNC control: FANUC 31i-A5 Dimensions & Weight Machine weight: 5,300 kg Overall dimensions: 3,200 × 3,250 × 3,245 mm EQUIPMENT Chip conveyor Paper filter Dedpfo Agfrwox Acyjwd High-pressure coolant pump Tool setting 4-axis table, 1 piece

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 016-018271-450, travel distance X-axis: 600 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 580 mm, controller model: FANUC 0i-MD, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 600 mm Travel range, Y-axis: 530 mm Djdpfxe Afxygj Acyjwd Travel range, Z-axis: 580 mm Table area: 840 × 500 mm Maximum table load: 800 kg Drive power: 15 kW Spindle speed: 8,000 rpm Tool positions: 20 Tool holder: BT 40 MACHINE DETAILS Control system: FANUC 0i-MD EQUIPMENT 20-position tool changer 80 tool holders BT 40

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, CNC machining center Hedelius Forte 7-2600 Magnum Control system: Heidenhain TNC 640 Year of manufacture: 2020 Availability: in transit Internal machine no. 73 Travel ranges: X-axis 2,600 mm Y-axis 750 mm Z-axis 800 mm Dedpfx Acjzzl Ugsyswd Shuttle operation: 2 x 1,000 mm Total clamping area 2x 1,490 x 750 mm Table load: approx. 2,500 kg Tool holder: HSK 63 Tool magazine: 50 positions Spindle speed: 50 - 18,000 rpm Drive power: 35 kW Equipment: - Chip conveyor - 2x coolant nozzles - Electronic handwheel - 3D measuring probe - Toolsetter preparation - Partition - High-pressure pump 60 bar - Zero-point clamping plates - Vises and tools as required

Condition: ready for operation (used), Year of construction: 2001, operating hours: 368 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: HEIDENHAIN TNC 410, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 762 mm Travel range, Y-axis: 510 mm Travel range, Z-axis: 510 mm Table dimensions: 950 × 520 mm Table load capacity: max. 455 kg Distance, spindle nose to table (min.): 127 / 227 mm Distance, spindle nose to table (max.): 637 / 737 mm Tool clamping system: DIN 69871-1986 / ISO 7388-1 / ANSI B5.50 Spindle taper: ISO 40 Spindle speed: 60–8,000 rpm Spindle motor power: 9 / 11 kW (depending on the operating mode) Speed programming: 1 rpm per step Rapid traverse rate, X-/Y-/Z-axis: 16 / 24 m/min Feed force, X-/Y-axis: 2 / 2.5 kN Feed force, Z-axis: 7 / 6 kN Dwsdpfx Acs Agu Speyed Positioning accuracy, X-/Y-axis: 0.003 mm Positioning accuracy, Z-axis: 0.004 mm Repeatability: 0.001 mm Tool magazine capacity: 21 tool positions Tool selection: Bidirectional drum rotation Tool weight incl. holder: max. 6.8 kg Maximum drum load: max. 68 kg Tool length: max. 385 / 305 mm Tool diameter with free neighboring positions: max. 80 mm Tool diameter with occupied neighboring positions: max. 160 mm Tool change time (chip to chip): 8.0 / 7.0 s MACHINE DETAILS Control system: HEIDENHAIN TNC 410 Operating hours Control system switched on: 1,209 h Spindle operating hours: 368 h EQUIPMENT Spindle drive with AC motor

Condition: excellent (used), Year of construction: 2002, operating hours: 18,419 h, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller manufacturer: Heidenhain, table load: 350 kg, number of axes: 5, TECHNICAL DETAILS X-axis travel: 630 mm Y-axis travel: 560 mm Z-axis travel: 560 mm Table length: 1,000 mm Dwsdpfxe Afw Aue Acyjd Table width: 600 mm Rotary table diameter: 600 mm Table weight: 800 kg Table load capacity: max. 350 kg Number of T-slots: 8 / 1 T-slot width: 14 H12 / 14 H7 mm T-slot spacing: 63 mm C-axis swivel range: 360° Tool interface: SK 40 Tool positions: 24 MACHINE DETAILS Control system manufacturer: Heidenhain Spindle operating hours: 18,419 h Total operating hours: 50,446 h EQUIPMENT 5-axis machining (3+2) NC-controlled swivel milling head (B-axis) NC rotary table (C-axis), integrated into the fixed machine table 24-position tool changer

Condition: good (used), Year of construction: 2016, operating hours: 17,000 h, functionality: fully functional, FOR SALE 5-Axis Machining Center – DMG MORI DMU 95 monoBLOCK® YEAR 2016 Description: Selling a DMG MORI vertical 5-axis simultaneous machining center (Deckel Maho Pfronten GmbH), year 2015. A versatile, highly rigid, and well-equipped professional machine. Suitable for complex and high-precision machining operations. Can be viewed powered on and in operation on site. Main Features: • Numerical Control: HEIDENHAIN TNC 640 (ERGOline® interface) • Spindle speed max: 20,000 rpm • Hour counters: Power on: 48,878 h | Actual machining: 17,030 h • Machine weight: ~14,000 kg (14 tons) Capabilities & Machining Envelope: • Travels: X = 950 mm | Y = 850 mm | Z = 650 mm • Max. workpiece dimensions: Ø 1,040 mm x Height 590 mm • Tilting rotary table: Ø 850 x 750 mm (Max. load 1,000 kg) • Tool magazine: 60 positions Equipment & Included Options: • HEIDENHAIN TS 649 infrared workpiece probe • BLUM laser tool measurement system • quickSET 3D geometric control kit • Remote electronic handwheel • Nozzle ring for coolant around the spindle • Safe operating mode: Mode 4 • Automatic chip conveyor & Original transformer • 3D STEP digital model of the machine included (for simulation/CAM) Conditions: • Removal, lifting, and transport are the sole responsibility of the buyer. Dwsdpfx Aj Af Aiaecyod PRICE €173,000

Condition: excellent (used), Year of construction: 2000, operating hours: 24,695 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, spindle speed (max.): 15,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Dsdpfxe Afxn Sj Acyjwd X-axis travel: approx. 1,000 mm Y-axis travel: approx. 800 mm Z-axis travel: approx. 500 mm Table length: approx. 1,250 mm Table width: approx. 800 mm Table load capacity: max. approx. 1,200 kg Spindle speed: up to approx. 15,000 rpm Tool holder: SK 40 MACHINE DETAILS Control system: Heidenhain Spindle operating time: 24,695 h Machine operating hours: 64,814 h Control system operating hours: 72,542 h EQUIPMENT Automatic tool changer Renishaw probing system Coolant system Chip conveyor

Condition: good (used), Year of construction: 2024, functionality: fully functional, Biesse ROVER C 1982 CNC Machining center (5-axis) Description; Working fields X = 8125 mm; Y =1950 mm Z= 470/500 mm UPS Closed chain cable holder X-axis 12 ATS Panel supports 48 sliding bases Pneumatic locking system in 2 work areas in X 8 aluminium lifting bar supports for loading ease of large and heavy pieces. 290 m3/h rotary claws vacuum pump Vacuum module - Size 132x146 - H74mm Vacuum module - Size 132x75 - H74mm Vacuum module - Size 132x54 - H74mm Belt conveyor for the removal of chips and off-cuts 21.6 kW (29.4 HP) operating unit with 5 interpolating axes HSK F63 adaptor and liquid cooling Suction hood with continuous positioning in Z controlled by NC Air-Jet cooling system Liquid chilling unit for liquid cooled systems Chain tool changer with 22 places at 180 mm centerdistance Strengthened gripper PC bTouch Presetter for the measurement of the tool length with diameter up to 130 mm bSolid 3D CAD-CAM program Additional license for bSolid Dsdpfx Aj Af Ii Necyjwd Additional filter for vacuum pump SOPHIA - IoT Connection Roller lifting support in replacement of the standard one Enlargement of mesh guards and movement of the doors from front side to rear side to load profiles with length up to 11 meters (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: good (used), Year of construction: 2000, Ref. -No.: 10468 Manufacturer: DECKEL MAHO Type: DMU 80 Year of construction: 2000 Control: Heidenhain Millplus Storage location: Halberstadt Country of origin: Japan Machine-No.: 111xxxxx X-Travel: 800 mm Y-Travel: 700 mm Z-Travel: 600 mm Number of T-slots: 9 / 14 Clamping Area: Ø 900 x 630 mm T - slot spacing: 63 mm Tool Taper: SK 40 Tool changer: 30 Spindle Speed: 12.000 RPM Dwsde Ain Iwopfx Acyjd Max. Torque: 2659 Nm Operating hours: 67.452 H Center hole: Ø 50 mm Holding torque: 4500 Nm Max. rotation of the table top: 10,7 rpm Feed: 3600 °/min. Resolution of the measuring system: 0,001 ° NC rotary table: 800 kg NC swivel rotary table: 600 kg Further information: - Clamping table 900 x 630 mm - Chip conveyor, sheet metal technology - Belt filter system, manufacturer Interlit - Type SK 200-760 - Oil mist separator - Set of tool holders, - Workbenches - 2x 6 drawers - Vise - Jaw width 125 mm - Roller shutter cabinet with 1 door The machine can be viewed under power by arrangement.

Condition: excellent (used), Year of construction: 2016, operating hours: 16,803 h, travel distance X-axis: 800 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 850 mm, workpiece weight (max.): 1,800 kg, total height: 3,700 mm, total length: 5,000 mm, total width: 5,600 mm, table height: 700 mm, table length: 900 mm, overall weight: 21,500 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 25 W, Year of construction: 2016 CNC controller: CELOS with SIEMENS 840D sl operate 21,5" ERGOline Control with Multi-Touch Screen Axes X-axis travel mm: 800 Y-axis travel mm: 1050 Z-axis travel mm: 850 C-axis degrees: 360º (0,001) B-axis degrees: -30º/180º (0,001) Feed rates m/min: 60 Rapid traverse m/min: 60 Acceleration in the axes m/s2: 7 Milling/turning table nc: Table dimensions mm: Ø900x700 Max. workpiece weight kg: 1800 Table rotation speed rpm: 40 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40/100%ED) Spindle torque Nm: 130/86 (40/100%ED Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 600 Tool system Tool holder: HSK-A 63 Tool magazine slots: 63 Tool changer: Double gripper With free neighboring places mm: 120 With occupied neighboring places mm: 80 Max. Tool Length mm: 650 Max tool weight kg: 15 Chip-to-chip time s: 4.2 Equipment Electronic Handwheel Chip conveyor Infrared probe Internal cooling lubricant supply Dwedo Adzbropfx Acysd Rotating inspection windows Rinsing gun Operating mode 4 blowing air through spindle center selectable via M-function Signal lamp Tool breakage probe Mist collector 3D quickSET MPC – Machine Protection Control Paper band filter Active chatter suppression (ACC), improved surface finish with reduced machining time, extended tool life Machine running times Under power: 38383 Spindle Working: 16803 Rated power kVA: 63 Basic machine dimensions / weight Length mm: 5000 Width mm: 5600 Height mm: 3700 Weight kg: 21500