number of spindles:6
spindle passage:20 mm
Cam controlled multi spindle automatic lathe, used
6 main spindles,
control: Siemens S5 PLC, electronical trip dog control type ?Balluff?
gear box for thread milling (2 pieces)
pick up for rear machining in pos. 6, work piece sorting shute,
coolant pump,
Bk7zpz0mkj
threading clutches, stock stand and reel,
tooling: could be different like pictures
partly revised inclusive new spindle bearings of the main spindles
interface for IEMCA bar loader
o...
number of spindles 8
spindle passage 20 mm
turning length 80-100 mm
control PNC-Deco Fanuc
Ulwj8yhx
turning speeds 5000 U/min
Sub-spindle 20 mm
load magazine IEMCA PRA 52/33P
Number of working hours h
total power requirement 15 kW
weight of the machine ca. 8 t
equipped with:
- 23 axes, 8 spindle
- Chip shut
Switch-on Hours: 57133 h
(with coolant device AE1058 Knoll Chip Conveyor)
Serial-No: 1638
with complete documentation
tool tapers
spindle passage 22 mm
bar feed max. 64 mm
max. bar length 3.000 mm
Main spindle:
turning speed range 23 - 4.457 min/-1
power capacity - main spindel 4,0 kW
supports:
number of cross-slides 3
0 35 mm
turret head:
number of toolpositions 6 pos.
0 60 mm
threading cutting device:
thread dia. M14 / M18 mm
total power requirement 8,0 kW
Nscxz
weight of the machine ca. 1,5 t
dimensions of the machine ca. 6,0 x 2,0 x 2,0 m
bar feeder interface
bar feeder Iemca Boss
Single-Spindle-Bar Auto...
spindle passage 25 mm
turning speeds 5750 U/min
Rest 4
straight turning atchm. - working travel . mm
turret head 8
thread cutting attachment
bar loader LNZ Hydrobar
total power requirement kW
Bnhz2nmpzg
weight of the machine ca. t
dimensions of the machine ca. m
Number of bars max.: 9
Bif2pzbv3c
cutting capacity with 1 bar max.: 20 mm
weight of the machine ca.: 6,0 t
Cuts, bends and picks steel rods. Plant is applicable for use in concrete formwork, reinforce concrete, etc.
Plant is specially has been constructed for this type of application area.
further technical details:
- capacity / cutting speed: according material 20m/min feed
- cutting unit incl. feed
- bending unit
equipment:
- bridge with robot unit for gripping of steel rods
- SPS controlled...
number of spindles 6
bar capacity 32 mm
Spindle spped 6.300 UpM
Control Siemens Sinumerik 840D
Jfdaavh
Multi-spindle lathe INDEX MS 32 C
The machine has worked machine in 1 to 2 shifts.
Bar loader: IEMCA SIR MS32 / 43 / F (4 meter magazine)
- Siemens SINUMERIK 840D with 16 free input / output
- Single NCU
- Artis tool monitoring
The machine has one C axis / transmit function each on the 6 main spindles
(Cylindrical path milling on lateral surface)
3 electrical preparations for auxiliary ...
number of spindles:6
spindle passage:32 mm
Article: multi spindle automatic lathe
Manufacturer: Index
Type: MS32B
Yob: 1997
H2vqxo3
Transmit function for milling
Synchro spindle for backworking
Drive power 38 KW
Various tool holders
Bar loader IEMCA SIR MS32/33P for 3 meter bars
Knoll high pressure unit
Please, contact us for getting more information and pictures on mail(at) or
number of spindles 8
spindle passage 20 mm
turning length 80-100 mm
control PNC-Deco Fanuc
turning speeds 5000 U/min
Sub-spindle 20 mm
load magazine IEMCA PRA 52/33P
Number of working hours h
total power requirement 15 kW
weight of the machine ca. 8 t
equipped with:
- 23 axes, 8 spindle
Bl0izvyxye
- Chip shut
Switch-on Hours: 57133 h
(with coolant device AE1058 Knoll Chip Conveyor)
Serial-No: 1638
with complete documentation
tool tapers
spindle passage 22 mm
bar feed max. 64 mm
max. bar length 3.000 mm
Main spindle:
turning speed range 23 - 4.457 min/-1
power capacity - main spindel 4,0 kW
Bgnmf9sady
supports:
number of cross-slides 3
0 35 mm
turret head:
number of toolpositions 6 pos.
0 60 mm
threading cutting device:
thread dia. M14 / M18 mm
total power requirement 8,0 kW
weight of the machine ca. 1,5 t
dimensions of the machine ca. 6,0 x 2,0 x 2,0 m
bar feeder interface
bar feeder Iemca Boss
Single-Spindle-Bar...
spindle passage 25 mm
turning speeds 5750 U/min
Rest 4
turret head 8
Bnhz0qy87d
thread cutting attachment
bar loader LNZ Hydrobar
type 6.26HS-4.4
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
Manufacturer STAR
Type JNC 25
Year of manufacture 1987
Control FANUC OT
Machine weight approx. 2.5 t
Total power consumption 10 kVA
Bnhqcpz3qm
Speed 300-6000 rpm
turning length 355 mm
revolver 2x 5-fold
Space requirement approx. 2.5x1.8x1.7 m
turning diameter over bed 32 mm
Spindle passage 25 mm
With 3 meter bar feeder
BAR LENGTH: 3000 mm
BAR DIAMETER: 52 mm
NOTE: BAR CAPACITY FROM 14 TO 80 mm
Bfxlfa8woc
PRICE: On demand
number of spindles:6
spindle passage:26 mm
cam controlled multi spindle automatic lathe, used
six spindle automatic lathe
hirth coupled drum
pick up in pos. 6; independent feed position 4
8eh2f3d
threading clutches
display Siemens Simatic OP27
control Siemens S7
Brankamp tool monitoring
IEMCA bar loader rack type PRA40/33/P
coolant box with hinge chip conveyor
Please, contact us for getting more information and pictures on mail(at) or
number of spindles 6
spindle passage 32 mm
turning length 152 mm
Speed 200-2800 U/min.
Ogcdcc8w7
turning diameter 32 mm
feed Werkstoff: 254 mm
Accessories:
multi edge turning, univ. thread cutting attachment,
Strehleinrichtung, chip conveyor, 1 set collets, set of change wheels
Automatic lathe + bar feeder Nakamura WT250
Year of construction: 2000
2 spindle automatic lathe -4500 rpm with 8 axes, 35kW, 2 revolvers, Y-axis, 24 started tools, Ø65/Ø51; part gripper; conveyor belt; chip conveyor; emulsion; IKZ 12bar; Fanuc 18i; bar feeder FMB loading magazine Turbo5-55/3200/A
X9ipda8
Machine 2011 overhauled at the factory;
spindle passage 25 mm
turning speeds 5750 U/min
Rest 4
straight turning atchm. - working travel . mm
turret head 8
thread cutting attachment
total power requirement kW
Oi9u7
weight of the machine ca. t
dimensions of the machine ca. m
number of spindles 6
spindle passage 20 mm
turning length 80 mm
total power requirement 25 kW
weight of the machine ca. 6,5 t
Max. bar Ø, normal 20mm
Max. bar Ø, square, hexagonal, octagonal14 / 17 / 18mm
Max. bar feed80mm
Stroke of longitudinal slide63 / 39.5 mm
Boring depth, max.39.6mm
Stroke of cross slide, max.32 / 25mm
Stroke of lower cross slide40 / 26mm
49 Spindle speeds355 - 5,000rpm
No. of workpiece revolutions per work cycle60 - 1.32
Rcmxrhtbb
35 cutting times per part0.36 - 53se...
BAR LENGTH: 4300 mm
BAR DIAMETER: 5-65 mm
WEIGHT: 1950 Kg
PRICE: On demand
Ta8vlwlk
number of spindles:6
spindle passage:67 mm
Cam controlled multi spindle automatic lathe, used
6 main spindles with passage max. rated diameter 67mm
prepared for pick up for rear machining in pos. 6 (pick up optional)
threading clutches, stock stand and reel
coolant pump
[optional: cleaning and revising]
more pictures on request
Jvvvwm
optional customizing:
CNC upgrade with modern CNC compound slide(s) on cross positions
The machine could be visited under power.
The scope of delivery regarding...
automatic bar feeder
Ck0pda2s
brand: IEMCA
model: Genius 226/32L
new in: 2002
barloader was connected to TRAUB TNL16
Automatic lathe STAR SNC-25 with bar feeder
Control Fanuc 6T
Technical data:
Bm09dwlvk9
Max. Bar capacity: 25 mm.
Max. turning length: 250 mm.
Spindle speed range: 120 - 4000 rpm.
Speed change via:4-position. Command
Number of rotary slides:5
Combined apparatus:up to 4 spindles
Max. Drill diameter:13 mm.
Max. Tapping diameter:12 mm.
Max. Tapping diameter (die):12 mm.
Engines:
spindle drive:3,5 kW
Z-axis servo:0,4 kW
X-axis servo:0,4 kW
Hydraulics:0,75 kW
Weight : 3'600 Kg
spindle passage 25 mm
turning speeds 5750 U/min
Rest 4
F3zqcvj
turret head 8
thread cutting attachment
bar loader LNZ Hydrobar
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
with extended immersion depth for fast loading
with servo drive
two-stage feed system
motorised adjustment of the guide prism and material separation
incl. 2 push rods Ø 10 + 20 mm
and 2 thrust pieces Ø 10 + 21 mm
SPS control system
Slide-in controller
Manual control panel with plain text display
Loading area 650/900 mm x 1650 mm
Bde3pkj8
For material processing from Ø 5 to 100 mm, 150 to 1600 mm long
Material length limited by headstock length
Stamgenlader was not put into operation after the p...
Bar capacity 65 mm
turning diameter 280 mm
EQUIPMENT and ACCESSORIES
oriented spindle stop with 2.5 degree indexing
12 station turret with 6 stations
Cooling by the tools
Chip conveyor
Rod guide SAMECA with 5 guide tubes
Psvzoiyj
Stem adapter
3 fixed stations for backworking
number of spindles:6
Bol0t088jh
Article: multi spindle automatic lathe
Manufacturer: GWM
Type: G20-6AC
Yob: 2013
Including IEMCA bar loader
Please, contact us for getting more information and pictures on mail(at) or
BJM machining and cutting center, SAE100 + NFZ 100, contains the loading table, the processing and cutting station, the reinforcement table, the up and down reinforcement station and the hole for the handle. It is programmed with GEALAN and SALAMANDER profiles! The machine works, the output arm from the reinforcement station is defective!
Flsmsnvww
spindle passage 25 mm
turning speeds 5750 U/min
Rest 4
straight turning atchm. - working travel . mm
turret head 8
thread cutting attachment
bar loader LNZ Hydrobar
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
Blcguuba
number of spindles:6
spindle passage:32 mm
Cam controlled multi spindle automatic lathe, used
6 main spindles
Bk7zmhmiz7
stepless adjustable Dnt-drive, Hirth coupled drum
pick up in pos. 6
independent feed in pos. 1, 2 ,4 ,5
stock stand and reel,
coolant box with hinge chip conveyor and coolant pump
cleaned, partly revised and new colored in color scheme grey/blue
tooling: could be different like pictures
Please, contact us for getting more informations and pictures on mail@ or
spindle passage 65 mm
turning length 360 mm
bore depth mm
Hmpc78j
Control C200T
turning diameter 175 mm
transmission ratio 2
chuck diameter 200 mm
power capacity 6,3 kW
chip conveyor
tool taper VDI 40
bar loader
live tooling
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
spindle passage 34 mm
turning length . mm
bore depth . mm
Control Index
type S 3
live tooling
bar loader Sameca
total power requirement kW
Bkoc2px0lx
weight of the machine ca. t
dimensions of the machine ca. m
spindle passage 60 mm
Stxjx0
cross-slide 4
turret head 6 Pos.
thread cutting attachment
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
spindle passage 60 mm
cross-slide 4
turret head 6 Pos.
thread cutting attachment
total power requirement kW
Eaq7jn
weight of the machine ca. t
dimensions of the machine ca. m
spindle passage 25 mm
turning speeds 5750 U/min
Bkpnp08wcz
Rest 4
turret head 8
thread cutting attachment
bar loader LNZ Hydrobar
type 6.30HS-4.4
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
spindle passage 25 mm
turning speeds 5750 U/min
Rest 4
Gb77wpjpu
turret head 8
thread cutting attachment
bar loader LNZ Hydrobar
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
spindle passage 25 mm
turning speeds 5750 U/min
Iwpyxgw
Rest 4
straight turning atchm. - working travel . mm
turret head 8
thread cutting attachment
bar loader LNZ Hydrobar
type 6.32HS-4.4
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
Automatic Barberan Varnishing Line. Year of production. 2000 The line shows slight signs of use.
Line used only for about 12 months, devices in perfect condition.
Automatic Barberan painting line, which includes:
- automatic Pinomatic stacker - supply of elements to the Pinomatic line
-Pinomatic conveyors
Fb9pte9
- Viet Valeria Challenge 333 TM grinder (2 x sandpaper shaft)
- Viet Valeria Challenge 223 TM sanding machine (3 x flap sanding shaft, 1 sanding sheet for curved elements)
- irradiat...
VFFS machine AM019 SERVO, equipped with an 8-head weigher ATD08-R, used for dosing and packaging of grain and granular product.
The line could be equipped also with a different feeding conveyor, according to the produt being packed.
Mibsy9d
An aspiration unit is connected to the line, making it highly suitable for grains with high dust accumulation (like sugar).
Horizontal baler 800+
75 tons of pressing power
Completely new machine!
Prize : 37 000 Euro’s (net price)
Technical specifications:
• Bale dimensions: 2565mm x 1800mm x 7040mm
• Baler weight (kg): 7500kg
• The size of the inlet: (height and width) 1800mm x 920mm
• Bale size: (height x width) 1100mm 1050mm
• Bale weight: +/- 820kg
• Wiring bales: 3 – 3.9mm
• Number of wires: 4
• Direction of wiring: vertically
• Pressure: 250 bar
• The size of the pump: 76,7cc, 14,5cc
• The number of cylind...
VFFS machine AM020 SERVO, equipped with a 14-head multihead weigher with 5.0ltr hopper volume, used for dosing and packaging of fresh salads in "pillow" bags. The line is also equipped with a label applicator, for automatic applying of labels on the ready bag.
The bag formers are easily changed according to the customer requirements.
Mflygk0
The line is also equipped with a specially deisgned feeding conveyor, which keeps the product from damage.
Single head cutting off
machine with Ø 550mm frontal
Bpvc83w8ts
blade, pneumatic head’s
tilting. Angle from 20° LH to
20° RH, Frontal full protection
with automatic
lowering/uppering device,
radial movement of the sawing
head along with linear guides,
Thriphase motor 2,2 KW.
Two pcs. Tornos R20- with bar feeder Barboy 29-AA-1 , in very good condition.
A total of 2 fully equipped Tornos R20 machines will be
with all accessories.
All machines are equipped with Barboy bar feeders.
Biku30ju80
Documents: Operating instructions / wiring diagrams Available.
Numerous accessories available: numerous cams, various clamping devices, tools, multiple drill spindle units, drill heads, cutting heads, etc.
More pictures on request. Price is per piece.
* 27 ” (686mm)
* Feed Speed 60 m / min
* Conversion to a new knife arm system
* Conversion to new feed rollers with changeable teeth
* Pneumatic feed rollers and knife pressure
N00dz
* Incl. Feed motor (45kW) and rotor motor (75kW)
Control Siemens
Bar diameter 42 mm
Sindle speed 2250 1 / min
Hexagonal machining
Bj3rx3ok38
Bar loading magazine
New loading magazine for connection to TORNOS CNC machines,
for example, Swiss-type automatic lathes DECO20 DECO26; EVODECO 20
or SIGMA 20 / SIGMA 32
Magazine type "IEMCA332 / 3200
Change the channel inserts by turning the segments.
The loading magazine can also be retrofitted up to 32 mm by exchanging other channel segments and other material slides. "OPTION"
The magazine is stable against vibrations, oil-flooded and can be quickly converted to other material diameters. Material / bar length 32...
-Guidechannel D21
- Pusherlength: L
Bwzwlrb3
Was installed on Manurhin K'MX 20.
BAR DIAMETER RANGE
Min. Ø 0,23” Max. Ø 2,04”
OPERATING VOLTAGE
Three Phase
FEEDING SPEED
0 - 19,68”/sec.
GUIDE CHANNEL LUBRICANT
ISO VG 100
REQUIRED AIR PRESSURE
8 bar
WEIGHT
3.306 – 3.968 lb
MAXIMUM BAR LENGHT
10.50 ft – 13.45 ft – 20.01 ft
Tlkogsqhv
AUTOMATIC ESSETRE TOP SAW FOR BARS STRAIGHT TRIMMING CUT
Jmm2zbc9
Automatic barloader:
Bfokla9ti9
-Centering device
-Guidechannel D46
-Barpusher D45
-Barlength 4300 mm
Pneumatic cylinder, compact cylinder
-Dattenberg SZ -50 / 50
Dwlsx3
-Hubweg 50 mm
-Piston rod Ø 16 mm
-Dimension 60/60 / H185 mm
-Weight 1.1 kg