Used Bar Loader for sale (25,278)

Year of construction: 2006, Condition: used, volt 200 V KW 2 KW In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional Cvrcz0Mz9I information. Changes and errors in the technical data and information as well as prior sale reserved!

Condition: good (used), Bar length 3000 mm Bu8Qvejy2Y Max bar diameter 65 mm Tubes diameters : 65 mm Dimensions 3900 x 1000 x 1200 mm Weight 1000 kg

Condition: excellent (used), Year of construction: 2018, Bar loader for multi-spindle lathe 6 spindles last mounted on Gildemeister AS 16 / AS 20 Ø pitch circle 180 mm B8Wdaq8J Guide channels 9/ 11/ 13/ 15/ 17/ 19/ 21 mm

Condition: like new (used), Bar length up to 1600 mm B8Pvvgk97V

Condition: good (used), Year of construction: 2008, CONTROLS .. electronic controls ELECTRICAL SPECIFICATIONS Cozz0Bnfhw .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 4200 mm .. space requirements -front/back-: 500 mm .. total height: 1200 mm .. total weight approx.: 500 kg

Condition: good (used), Bar diameter 65 mm H8Xf3Eek0 Max. bar length 3200 mm

Year of construction: 2001, Condition: used, volt 200 V KW 2 KW In our opinion, the machine is in good used condition and can be inspected under power by appointment. Dqpihd Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as prior sale reserved!

Condition: good (used), For 5 meters bars Bu8Qpyuttg

Year of construction: 2002, Condition: used, The used FEDEK SN542 automatic bar loader is a valid alternative to the more classic bar feeder for carrying out (unmanned) bar machining on production CNC lathes. Bd7Cv0Ljtwg Maximum bar length 3,000mm, maximum bar passage 42mm year of construction 2002, according to CE standards.

Condition: used, Year of construction: 2006, machine/vehicle number: IntNr230824, Magazine for bar diameters from 0.8 - 23 mm FMB Micromag 20 3200 "A" complete unit incl.: Telescopic tube, conversion kit, synchronizing device, manuals Connected loads: 3 x 190 - 480V Dimensions: (LxWxH): 5015x687x1200mm Cegos8Yvl8 Weight: 600Kg The machine can be inspected by appointment. Changes and errors in the technical data and information as well as prior sale reserved Magazine for rod diameters from 0.8 - 23 mm FMB Micromag 20 3200 "A" Complete unit incl: Telescopic tube, conversion kit, synchronizing device, manuals Connected loads: 3 x 190 - 480V Dimensions: (LxWxH): 5015x687x1200mm Weight: 600kg The machine can be inspected by appointment. Changes and errors in the technical data and information as well as prior sale reserved!

Condition: used, Year of construction: 2010, cheap for sale, available immediately Brm0B8Ll2Lw

Year of construction: 2008, Condition: excellent (used), Max. bar diameter 65 mm Max. bar length 3000 mm Gtmugtzqk

Condition: good (used), Year of construction: 2003, CONTROLS .. electronic controls ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 4200 mm .. space requirements -front/back-: 1000 mm .. total height: 1200 mm .. total weight approx.: 500 kg F3Jch79 Bar range 3-32mm

Condition: used, Year of construction: 2005, IRCO Profimat 50.8 _____ Description: In General: Technology:Multi-channel loading magazine Number of guide channels:8 pieces Brpb8Kc8Sps Sizes:14/20/26/32/37/42/47/52 mm Number of workpiece slides:8 pieces Diameter of the bars:10-50 m Bar length:3,000 mm Spindle height:1,055 - 1,200 mm Interface:Gildemeister : Attention:Loading magazine 2024 overhauled. Interface adaptation:Possible to machine interface.

Condition: used, Year of construction: 2000, Functionality: unexamined, machine/vehicle number: 3994, MOD. MULTIFEED ML1 SHORT BARFEED Dqopmd

Year of construction: 2019, Condition: used, Functionality: fully functional, machine/vehicle number: 74 120 037, Area of application: - Ideal for small to medium batch sizes and confined spaces Features: - Changeover times of less than one minute at the touch of a button - Short reloading times thanks to high rapid traverse speed of up to 90 m per minute - High level of operating convenience thanks to a 14.5 cm (5.7") graphic touch display - Reliable feeding of rotationally symmetrical profile material - Minimal energy consumption, no air connection required - Large storage capacity for up to 8 bars with a material diameter of 70 mm Working range: - Round material diameter from 6 mm to 76 mm Us0Cq2Jild - Bar lengths 300 mm to 1200 mm / 1600 mm Special features: - Easy change of spindle insert tubes due to radial displacement of the magazine Mass approx. 600 kg Length 1800mm Width 950mm Swivel 260mm Material diameter 6-76 mm material length 500-1250mm max. feed path 1470mm

Condition: good (used), Bar loader. Max bar length 3m, max diameter 20 mm. Bdh0Zmadit

Condition: excellent (used), Year of construction: 2018, Used CNC lathe with Y-axis Haas ST-30Y Year of construction 2018 X/ Y 457 x 584 mm 76 mm bar capacity Standard program memory 1 GB Spindle, 4,500 rpm 22.4 kW A2-6 spindle nose 208 liter coolant tank with 0.6 kW pump Hydraulically operated 254 mm chuck Early detection module for power failure Ethernet interface Driven 4,500 rpm tools and C-axis, includes 24 (semi-indexed) stations BMT65 turret Synchronized tapping Automatic tool presetting arm with manual and automatic adjustment Hinged belt chip conveyor Programmable hydraulic tailstock MT4 Morse taper Finished part catcher Haas bar loader 1.5m Transport dimensions: 435 cm x 229 cm x 249 cm 6487.0 kg Machine can be inspected by arrangement in Upper Austria. G0Ctdcr The buyer takes care of transportation. Technical data, accessories and description of the machine are non-binding

Condition: used, Year of construction: 2000, Article: loading magazine for Schütte AG20 Cgwcpimcaw Manufacturer: Pietro Cucchi Type: surface loader year of construction: 2000 for bar length 3000mm Please, contact us for getting more information and pictures on mail(at) or

Year of construction: 1990, Condition: good (used), machine/vehicle number: 3-201065, Material passage in the supply pipe max .: 65 mm for material lengths up to: 3000 mm Feed force infinitely adjustable up to max .: 550 N. Charging time approx .: 30 s elec. Connection / power requirement: 380 V / 1.5 kW Space requirement: 5810 x 920 x 1515 mm Weight: 1200 kg Gvdgpg

Condition: good (used), Year of construction: 1998, machine/vehicle number: 71000521, smallest passage: 5 mm largest passage: 160 mm loading length: 1.200 mm Connection: 1 kW Accessories/equipment: suitable for CNC - machines e.g. Index G300) Condition: good Weight: approx. 0,6 t K7Uxn Dimensions: 3.300 x 1.000 x 1.500 mm

Condition: new, Year of construction: 2021, Bar loading magazine for multi spindle automatic lathe Schütte SG18, factory new Special offer! Test phase on your machine in D/A/CH/BeNeLux possible! Manufacturer: Giovanni Cucchi Machine type: Bar loading magazine for multi-spindle Schütte SG18 Type: DBM 21/36 Design: lateral loading magazine / integral loading magazine Bvtabkq0O2 Yob: 2021 length of bars: 33000mm Total length: approx. 3680mm Bar stock: approx. 680mm Optimized loading time (modification to Schütte may also be required) 12-14 seconds (total loading time). There are several pieces brand new and immediately available. Please, contact us for getting more information and pictures on mail(at) or

Year of construction: 1998, Condition: ready for operation (used), for material Ø: 6 - 80 mm for bar lengths: 100 - 915 mm Gvjqks Shooting table size: 945 x 800 mm Working height: 1400 mm height adjustable: +/- 200 mm elec. Connection: 220V Space required: 3420 x 1150 x approx. 1500 mm Weight: about 300 kg

Condition: new, Bar loading magazine for multi spindle automatic lathe, new Manufacturer: Giovanni Cucchi Machine type: Bar loading magazine for multi-spindle Type: CMSP/CMSPF Design: Side loader as surface loading magazine or bundle loading magazine CMSP / CMSPF at a glance: Proven technology - in use for decades The material feed of this loader generation is carried out by the loading magazine. Bar loading magazines CMSP/CMSPF are mounted on rails, so they can be easily disconnected from the machine at any time by unlocking them at the quick release. These magazines do not require bar tubes on the machine and are screwed directly to the machine. It is possible to work in automatic mode as well as in manual mode. The magazine is mounted on rails, so it can be easily disconnected from the machine at any time by the operator by unlocking it on the machine. To change bar diameters, only the clamping sleeves of the magazine are changed. Bk3Ytpss98 The centering unit adjusts itself to the new diameter by itself. It dampens all kinds of vibrations during machining (suitable for round, square and hexagonal material!) and prevents the bar from forming an arc in the channel. This allows very high speed machining (even with larger diameters). Quick changeover to the next diameter to be machined and a significant reduction of vibrations, due to the proven double centering, are only two of the many advantages of this system. The advantages of CMSP/CMSPF barfeeders at a glance: - short loading time - optimal guiding of the bar material by double or, if necessary, triple centring device - no oil flooding - dry running - quick change of the diameter to be machined - short design - space saving - very low wear of the guide channel - self-adjusting centring device - significant reduction of vibrations Please, contact us for getting more information and pictures on mail(at) or

Condition: new, Automatic bar loading magazine for single spindle automatic lathe / short lathe, new TEST the new DB-EVO bar loader 4 WEEKS, NON-BINDING, FREE OF CHARGE (conditions on request) very high speeds even with profile material Manufacturer: Giovanni Cucchi Machine type: Automatic bar loading magazine for single-spindle / short turning Type: DB-EVO Design: Surface loading magazine or bundle loading magazine diameter range: 20-110mm DB-EVO at a glance: Scope of delivery and optionally orderable functions: - oriented loading of the bar material possible (e.g. edge upwards) - optional feeding of saw cuts and short parts possible - optional - Monitoring and fault diagnosis (touch screen) - Surface magazine - Bundles and other variants possible - automatic loading of short bars Obd2D - Trays for tools - low power consumption (start/stop function) - Available in versions for 1.5, 1.8, 2.5, 3.3, 4.2 and 6.1 meter rod length - Special lengths on request - Also available in special designs (e.g. unloading function, stamp, etc.) - Also available with bundle loading - Optional shifting device The advantages of DB-EVO barfeeders at a glance: - oriented loading of the bar material possible (e.g. edge upwards) - dry running - no oil flow - significantly reduces vibrations even with material that is not optimally straight due to the unique design of the guide channel - very high speeds even with profile material (e.g. hexagon, square, flat material and special profiles) - short remaining pieces, as no clamping sleeve is used - very short charging time (charging process still during machining) - solid construction - very low wear of the guide channel - external loading - therefore no stop for new bars necessary, low power consumption (start/stop function) Please, contact us for getting more information and pictures on mail(at) or