Condition: refurbished (used), Year of construction: 2018, machine/vehicle number: DF0150, pressing force: 63 t, pressure:63 t passage width:700 mm Hedefhcc Uepfx Aalsfd stroke:500 mm Approx. weight (w/o operational materials):5,1 t Measurements L x W x H:ca. 1500 x1600 x 2995 mm Return Capacity:6 t Engine Output:11 kW Max Working height:700 mm Approaching Speed max. :140 mm/sec Pressure Speed:15 mm/sec. Travel:500 mm Ram plate:600 x 540 mm Table size:750 x 600 mm Table height above ground level:850 mm Oil Tank Capacity:150 l Control voltage:24 V Frequency:50 Hz Siemens Control System:S7 1200 Monitor:Siemens 12 Zoll Special feature: When operating at 260bar the machine reaches a pressure level of 70 tons.

Condition: as good as new (ex-display), Year of construction: 2022, machine/vehicle number: NEBR-4397, pressing force: 15 t, Here are the technical data of the offered machine: If the press does not exactly match your requirement profile, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! ##### Technical details Pressure 15 t Technology stroke 160 mm Machine weight approx. 330 kg oil tank 10 l robust machine body with solid welded construction, manufactured according to DIN 8651 ##### Additional information low-maintenance and reliable due to robust technology cylinder with induction hardening and chrome plating steel quality: engineering steel LCG ASTM A36 4 support feet with M30 holes for floor mounting ##### Equipment 1.5 T rotating mandrel attachment, mechanical, with locking, toothed shaft and brake and 220 mm travel hydraulic hand pump with max. 15T pressure and 160 mm travel, with return spring back wall projection to the center of the tool holder 280 mm mounting table swivels 180 degrees to the right with 60 mm bore in the center, M 12 T-slots Clearance height between swivel table and slide/turning mandrel guide 450 mm Passage height up to additional table, insertable, 650 and 800 mm Additional table with center hole, 60 mm, insertable, T-slots M12, size 270x200 mm Height of the base with two inserts for additional table 750 mm on the cylinder a pressure plate, hardened, diameter 10 mm bigger than cylinder in the cylinder head tool holder M 30 Pump lever moves from top to bottom Oil tank for 10 L hydraulic oil AW 46 Painting of the machine body: Blue, RAL 5012, pressure paint Painting of the attachments: Anthracite, RAL 7021 hydraulic single-column combination press as a special machine 15 tons, manual Hfjdpfxefhcc Is Aalsd (C-press, hydraulic press, hydraulic press) ##### Are you looking for a custom-fit machine? Contact us for an individual offer. Our hydraulic presses are manufactured according to German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore our presses exceed the Canadian and European safety requirements, because they correspond in all points to the national Brazilian safety guideline NR 12, which is based on these. Our great strength is the special machine construction and the press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: used, Year of construction: 2001, machine/vehicle number: H01-3129, pressing force: 200 t, pressure:200 t passage width:1300x1300 mm stroke:1000 mm Hfedpfefhcc Njx Aalod total power requirement:37 / 5,5 kW weight of the machine ca.:29500 kg dimensions of the machine ca.:2600x3000x5200 mm speeds::450 mm / freier Fall speeds::20 mm/sek tracking travel:130 / 60 ms oil pressure :283 bar capacity of oil tank:2200 L

Condition: used, Year of construction: 2017, pressing force: 500 t, pressure:500 t passage width:1300x800 mm stroke:600 mm weight of the machine ca.:18 t dimensions of the machine ca.:2400 x 2400 x 5500 m draw back pressure:50 t Controll:Zweihandbedienung cylinder:1 Stück motor:50 kw Oil Cooling:elektrisch column diameter:200 mm work height max.:700 mm Table dimensions:1900 x 800 mm Hfedsd E Irmspfx Aaljd table height over floor:1000 mm pestle plate:1300 x 800 mm pre-running speed:150 mm/sec work speed:5-10 mm/sec. return speed:150 mm/sec :1500 l quantity of oil:1400 l

Condition: new, Year of construction: 2018, machine/vehicle number: DF0116 - Rev.00, pressing force: 110 t, pressure:110 t passage width:1300 mm stroke:1500 mm Weight of machine approx.:12 t dimensions:ca. 2300 x 2090 x 4200 mm return capacity:11 t Max Working height:1500 mm pestle plate:1730 x 1100 mm table plate:1730 x 1100 mm table height over floor:700 mm column diameter:140 mm Thickness of ram plate:100 mm Hodpfxjdxvflo Aalsfd thickness of clamping plate:100 mm Noise Level (Max.):67 dB Color machine body:7035 RAL Color moving parts:2009 RAL Colour other components:7021 RAL Colour of balcony and casing:1021 RAL motor capacity:18 kW Approaching Speed max. :300 mm/sec pressure speed:15 mm/sec Oil Tank Capacity:150 l Siemens Control System:S7 1200

Condition: new, machine/vehicle number: DF0279, pressing force: 1,000 t, pressure:1000 t passage width:1500 mm stroke:800 mm total power requirement:91 kW weight of the machine ca.:68 t dimensions:3850 x 2900 x 6000 mm return capacity:100 t Table dimensions:1500 x 2250 mm Hjdpfsfxyiysx Aaljfd :1500 x 2250 mm table height over floor:1300 mm pre-running speed:200 mm/sec return speed:200 mm/sec Pressure Speed:10 mm/sec :1200 l Oil cooling (electric):1,5 kW (max) Max Working height:1000 mm :200 mm/sec Monitor:12 Zoll

Year of construction: 2018, condition: new, machine/vehicle number: DF0246 Rev0, Tol measurements:2500 x 1800 weight max.:20 t range L-W-H:1920 x 2818 x 1140 mm :1000 - 2000 mm :700 - 1200 mm Weight:2 t Motor output:2,2 kW :70 mm Tol measurements:2500 x 1800 mm Hedpfxsdxvfmj Aalefd

Condition: used, Year of construction: 2004, pressing force: 150 t, For sale is a used Millutensil MIL 163 hydraulic spotting press from year of manufacture 2004, featuring a pressing force of 150 tons. This 4-column press offers a table size of 1,300 × 1,600 mm, a maximum installation height of 1,300 mm, and a column clearance of 1,700 × 1,370 mm, making it particularly suitable for spotting, try-out, and adjustment work in tool and mold making. ##### Technical data & information: Spotting Press – Millutensil MIL 163 – 150 T ####General Details - Manufacturer: Millutensil - Model: MIL 163 - Year of manufacture: 2004 - Type: 4-column spotting press - Pressing force: 150 T (adjustable) - Column clearance: 1,700 × 1,370 mm - Table size: 1,300 × 1,600 mm - Max. installation height: 1,300 mm - Table height from floor: 610 mm - Overall dimensions (W×D×H): approx. 2,000 × 2,550 × 4,600 mm - Total weight: approx. 19,000 kg - T-slots: DIN 650 / 22 - Open height: 1420 mm - Stroke: 1120 mm ####Tool Load Capacity - Max. ram load: 10,000 kg - Max. table load: 16,000 kg ####Ram - Swivel range: 100° / 150° / 180° - Maximum splitting force: 30 T ####Hydraulic Cylinder - Cylinder diameter: Ø 440 mm - Piston rod: Ø 300 mm - Extension: 300 mm - Return speed: 35–50 mm/s - Idle speed: 65–85 mm/s - Pressing speed: 8 mm/s ####Hydraulic Power Unit - Motor power: 18.5 kW Hedpfx Ajytttpoalofd ####Electrical connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Total connected load: approx. 18.5 kW ####Control system - Control panel operation - Siemens SIMATIC OP7 operator panel - Lockable mode selector switch ####Safety - CE-conformity (year 2004)

Condition: new, Year of construction: 2026, pressing force: 100 t, For sale is a hydraulic C-frame single-column press with a pressing force of 100 tons. The machine features a table size of 700 × 750 mm, a maximum installation height of 550 mm, and a stroke of 400 mm, making it suitable for a wide range of pressing, assembly, and forming tasks in industrial and production environments. ##### Technical data & information: Hydraulic Single-Column Press – C-Frame – 100 T #### General Information - Design: Single-column press / C-frame - Pressing force: 100 t - Table size: 700 x 750 mm - Max. distance between ram and table: 550 mm - Working height: 1000 mm - Overall dimensions (W x D x H): 1200 x 1150 x 2550 mm - Total weight: approx. 5,800 kg - Frame: welded steel frame - T-slots / drillholes: DIN 650 / 22 mm #### Hydraulic Cylinder - Stroke: 400 mm - Piston rod Ø: 80 mm - Cylinder Ø: 140 mm - Max. operating pressure: 270 bar - Interchangeable press head: Ø 100 mm #### Hydraulic Power Unit - Return speed: 14 mm/s - Working speed: 9 mm/s - Hydraulic pump: ASC - Delivery rate: 19 l - Motor power: 7.5 kW - Oil tank volume: approx. 70 l - Hydraulic block / valves: Dubomatic - Pressure display: manometer - Adjustable pressure setting Hodpfx Aeytql Ajalefd - Sensors: limit sensor and pressure switch - Cooling: air cooling - Power unit: mounted on top of the press #### Electrical Connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor connection: 7.5 kW - Total connected load: approx. 10 kW #### Control Cabinet - Protection class: IP54 - Reserve space: 30% - Cooling: available - Internal lighting: available - Operating mode switch: lockable #### Operation - Manual control via hand lever valve - Foot pedal operation - Pressure adjustment via pressure relief valve - Pressure indication via manometer - Emergency stop on control panel (Hydraulic press, single-column press, C-frame press, 100-ton press, 100 t press, workshop press, straightening press, assembly press, insertion press, industrial press, production press)

Year of construction: 2023, condition: used, machine/vehicle number: B1703I0727, Press force: 500 kN, stroke: max. 215 mm, overrun time: max. 117 ms, overrun distance: max. 15 mm, machine weight: 5,500 kg Hfjdpfx Aaoyn Nh Sslod

Condition: used, Eccentric punch press HAULICK + ROOS type RVD 125 double column - eccentric press Machine No. 212560 Year of construction 1981 pressure force 125 ton. table size 880 x 800 mm table opening 470 x 140 mm column width 900 mm column width lateral 415 mm ram stroke 45 mm slide adjustment travel 0-80 mm Installation height on the picture 340 mm Stroke rate 50 to 300 strokes/min. Motor power main drive 22 kW Mains connection 380 volt, 50 Hz - Double connecting rod drive with 4-fold eccentric shaft for off-center ram pressure load Hedohlnzkopfx Aalefd - adjacent electrical cabinet - NC roll feed EBU, width 250 mm, year 2003 - adjacent control panel for roll feed - strip running direction from left to right space requirement (press) L x W x H 3000 x 2000 x 3020 mm transport height 2950 mm weight of the press approx. 11 ton.

Condition: used, Single-Column Eccentric Press WEINGARTEN Type EV 63 Machine No. 738 / 61 Year of manufacture: 1962 Pressing force: 63 tons Throat depth: 260 mm Table size: 630 x 530 mm Table opening: Ø 210 mm Ram area: 315 x 260 mm Adjustable ram stroke: 8–100 mm Ram adjustment: 63 mm Ram shank bore: Ø 40 mm, with clamping piece Installation height: max. 450 mm Strokes per minute: 115 spm Air requirement: min. 4.5 bar Motor power: 4 kW Electrical connection: 380 Volt, 50 Hz Table height above floor: approx. 750 to 900 mm - Electric stroke release via foot switch or two-hand control - Overload protection by shear plate - Clutch-brake combination via WEINGARTEN friction-threaded clutch with TDC safety - Front crankshaft support bearing - Press table height adjustable via 2 threaded spindles Hjdpfxek S Htxo Aalsfd - Manual central lubrication system - Free-standing electrical cabinet - UVV (accident prevention regulations) for manual loading operations Space requirements (L x W x H): 1750 x 1600 x 2430 mm Weight: 4.5 tons In good condition

Condition: used, Hydraulic workshop press, broaching press, keyway broaching press MaVo Type 5t-20 hydraulic workshop press Used for broaching keyways in through holes. Press force 5 tons (at 100 bar hydraulic pressure) Column width 770 mm Cylinder stroke 220 mm Distance from threaded piston rod to table crosshead max. 900 mm Pressing speed (downward ram): approx. 11.5 mm/sec. = 220 mm in 19 seconds Pressing speed (upward ram): approx. 24.5 mm/sec. = 220 mm in 9 seconds. Motor power 5.5 kW Power supply 400 volts, 50 Hz - 2-hand control (2 buttons for down, 1 button for up) - HAWE hydraulic pump, type K5/3 (also delivers 400 bar, but the pump is very, very loud) - Threaded connection on the piston rod: M42 x 1.5 mm external thread Hedpfx Aewki Apjalefd - 1 screw-in extension, approx. 290 mm, for the piston rod with M42 x 1.5 mm internal thread - 1 screw-in extension, approx. 250 mm, for the piston rod with M42 x 1.5 mm internal thread - 2 ram extensions for insertion into the screw-in extension, 110 and 130 mm long - 2 support plates - Very sturdy steel construction made of 140 mm double I-beam - Durability of the steel construction probably 40 tons. or more - Mobile with pallet truck Space requirement: L x W x H 1200 x 930 x 2280 mm Weight: 485 kg

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 97862034, installation height: 255 mm, sheet thickness (max.): 5 mm, working width: 180 mm, pressing force: 100 t, stroke length: 50 mm, TECHNICAL DETAILS Pressing force: 100 t Total force: 1,000 kN Ring serration force: 40 - 310 kN Counter-holder force: 10 - 270 kN Maximum material width: 180 mm Maximum material thickness: 5 mm Strokes per minute (min.): 20 rpm Strokes per minute (max.): 80 rpm Stroke: 50 mm Hodpoytcd Rofx Aaljfd Feed unit Maximum strip thickness: 5 mm Maximum strip width: 180 mm Maximum feed length per ram stroke: 999.9 mm Tensile force per feed (starting force): 6 kN Clamping force: max. 19 kN Maximum feed height adjustment: +40 mm Maximum distance between feed rollers: 20 mm Resolution (per rollers): 0.1 mm MACHINE DETAILS Input voltage: 400 V Input frequency: 50 Hz Connected load: 13.5 kW Pump power: 3 kW Motor power: 3 kW Air connection: 6 bar Height adjustment type: hydraulic Dimensions & Weight Dimensions (H x W x D): 2,420 x 2,325 x 1,665 mm Installation height: 255 mm Weight: approx. 6 t Year of last overhaul: 1997 EQUIPMENT Decoiler unit Two tool sets Note: Further technical details on the machine can be found in the attached operating manual.

Condition: used, Year of construction: 2005, Pressure 1000 t distance between columns 4100 mm stroke 1200 mm Distance table/ram, stroke up 2100 mm Table surface area 4000 x 2200 mm pressure of drawing cushion in table 360 t Die cushion stroke in table 300 mm Die cushion area in table 3500 x 1600 mm Die cushion pressure in ram 100 t Die cushion stroke in ram 160 mm Die cushion area in ram 3250 x 1600 mm Ram surface 4000 x 2200 mm Hfsdpfovuubgex Aaled Side window 1300 mm Oil volume 8000 l Power capacity 300,0 kW Dimensions (WxDxH) 5,75 x 4,3 x 9,55 m Height above floor 7,7 m year of manufacture 1973 - modernization 2005 with oil-hydraulic drive, hydraulic controlled drawing cushion in table and ram, hydraulic cutting impact cushioning stored in dismantled condition Video at seller’s site before dismantling available

Condition: used, Year of construction: 1986, total height: 2,900 mm, total width: 1,450 mm, total length: 1,500 mm, Empty weight: 5.500 kg Price: On request - Year: 1986 - Documentation available: Yes - CE certificate present: No Hfjdpfx Aeylb Edealsd - Serial number: 88 09-86 - Drive system: Conventional - Press force [ton]: 63 - Min. stroke [mm]: 10 - Max. stroke [mm]: 100 - Table length [mm]: 710 - Table width [mm]: 480 - Ram width [mm]: 320 - Height adjustment [mm]: 80 - Transport dimensions: 1500mm x 1450mm x 2900mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, pressing force: 100 t, input voltage: 380 V, Hydraulic press Hodpfsx Syc Njx Aalofd Brand: Francisco CAMP Force: 100 tons Maximum piston stroke: 150 mm Motor: 2 HP Power: Three-phase 380V Operation by pedal/control panel Table dimensions: 780 x 330 mm Clear press width: 780 mm Clear height from table to piston base: 400 mm

Year of construction: 2020, condition: as good as new (ex-display), Hydraulic press for tests and retouching of dies Brand: MHG Model: ER.2S.DM-300/2100 Serial number: 927 Year: 2020 Required power: 40kw Hydraulic oil: 1000Ltrs. deposit + 200 liters. circuit filling Total number of cycles: 403 (NEW MACHINE, PRACTICALLY UNUSED) Maximum force: 300t Number of cylinders: 3 Maximum tooling dimensions: 1400x1400mm Maximum tooling mass: 16,000kg Maximum working table and mobile table opening: 1690mm Minimum opening of work table and mobile table: 960mm Maximum mobile table travel: 730mm Approach speed: 92 mm/s Hfsdpfxsk Sgvye Aalod Recoil speed: 93mm/s Stop time: 0.2s Safety distance: 500mm Weight with empty tank: 35.000kg

Condition: good (used), Year of construction: 2002, overall weight: 5,900 kg, pressing force: 63 t, Model: PREN-63 Year: 2002 Weight: 5900 Kg Nominal force: 63Tn Type: Pneumatic clutch eccentric Normal stop position (PMS): 650mm Closing height (PMI): 350 mm Travel: 10-100 mm Motor: 5,5Kw 380V 50Hz Max. carriage adjustment: 65mm Hsdpfxouifr Hs Aalsfd Air pressure: min. 3,5 max. 6 bars Total stopping time: 278ms Safety distance: 445 mm Maximum RPM at flywheel: 600

Condition: good (used), Year of construction: 1991, operating speed: 8 mm/s, column diameter: 200 mm, retraction force: 30 t, reverse speed: 40 mm/s, Brand: LoireSafe Hfsdpsudv D Njfx Aaled Year: 1991 Type: Hydraulic Maximum Force: 15-150Tn Return force: 30Tn Movable platen stroke: 1200mm Table dimensions: 2800x1500mm Moving platen dimensions: 2800x1500mm Table displacement stroke: 1500mm Guided height: 800mm Diameter of columns: 200 mm Height of the table to the floor: 700 mm Power: 11Kw Approach speed: 50 mm/sec. Working speed: 8 to 2mm/sec. Return speed: 40 mm/sec

Condition: used, pressing force: 150 t, Eccentric Press Brand: ULECIA Hsdpeylzcvofx Aaljfd Serial No.: 1877 Type: Pneumatic Clutch Force: 150 t Strokes per minute: 40 Stroke (Max / Min): 160 / 24 mm Power: 10 HP *The press is delivered as is, without any type of warranty.

Condition: used, Year of construction: 2003, pressing force: 120 t, overall weight: 12,000 kg, Hydraulic Press Brake Brand: Hidrogarne / Ermaksan Model: AP 4100-120 Year: 2003 Power: 11KW Weight: 12,000kg Hsdpox Tp Auefx Aaljfd Bending length: 4100mm Force: 120t Approach speed: 80mm/s Working speed: 8mm/s Y-axis and X-axis back gauge control with ELGO control system. PROMECAM punch holder. Supplied with: - 4m one-piece die, 90x90mm with several V openings - 4m gooseneck punch, 90mm height, in 835mm sections and some additional smaller pieces - Also comes with sets of straight and 30-degree punches (see pallet photos of punches)

Condition: used, pressing force: 160 t, Eccentric Press Brand: AITOR Model: ARMM/EF Type: Pneumatic clutch Year: 1992 Force: 160 t Strokes per minute: 50 Stroke (Max / Min): 180 / 5 mm Maximum connecting rod extension: 120 mm Weight: 13,000 kg *The press is delivered as is, without any kind of warranty. Hjdsyl Tuwspfx Aaljfd

Condition: good (used), Year of construction: 1974, pressing force: 100 t, Model: OB1 Pressing force: 100Tm Torque: 3500kg Plate thickness: 10mm Pusher slider: 5-159mm Distance between table and spindle/pusher: 530mm Hfedpfx Asudwr Ujalsd Max. spindle/pusher travel: 130mm Strokes per minute: 53

Condition: used, Year of construction: 2021, functionality: fully functional, pressing force: 500 t, Hydraulic 500 T Gantry Straightening Press with tool clamping device and parallel support for the bending blade a) Idle and pressing speed up to 17 mm/sec b) Opening speed up to 44 mm/sec c) Table size 2000 x 850 mm d) Open height 1500 mm e) Overall size approx. LWH 1500 x 3000 x 4300 mm f) Oil temperature indicator on the tank g) Lubrication via grease nipple h) Table with grid design i) Remote control j) Pressure adjustment from 80 T to 500 T via rotary dial k) Table moves hydraulically outward 700 mm for loading l) Cylinder moves left and right via racks m) Machine body powder-coated or double-coated n) T-slots according to customer requirements o) Cylinder induction-hardened p) Assembly, commissioning, and instruction are charged separately. Press type: GANTRY PRESS Thermally neutral 80 – 120 °C Number of operating sides: 3 Forces Max. press force: 5,000 kN Max. free tear-off force: 800 kN Pressure build-up time: Closed tool, steel on steel: Max. 3 seconds Dimensions Max. opening width: 1,500 mm Stroke and min. opening: 1,300 mm/200 mm Table height above floor: approx. 850 mm Height above floor (overhead height): approx. 4,300 mm Hall height: min. 5,000 mm Hfjdpfx Ajwgakvsalod Deflection Determined at max. closing force with 70% occupancy: < = 1.2 mm/m Weight Total weight of the press without operating materials and table top: approx. 25 t Speeds Quick closing with 17 mm sec. Pressing speed at F max.