Used hydraulic single column presses 26-50t for sale (31)

Condition: used, Single-column hydraulic press MAE type S63SZ SO . 551277 Year of manufacture approx. 1977 Nominal pressing force: 63 tons Pressing force: 50 tons (practically tested) Throat depth: 320 mm Table area: 850 x 630 mm Ram area: 1050 x 500 mm Ram stroke: 500 mm Max. installation height: approx. 730 mm Table height above floor: 970 mm Hydraulic tank capacity: 600 liters Drive power: 15 kW Power supply: 380 Volt, 50 Hz - Hydraulic draw cushion below the table with bores through the tabletop - Two-hand operation - Electrical control cabinet damaged Required space (L x W x H): 2000 x 1200 x 3420 mm Weight approx. 5 tons Nkodedzp Trjpfx Agnju The machine is operational, the control cabinet is mechanically damaged. During test run, the machine achieves a pressing force of 50 tons, presumably a pressure relief valve is venting.

Condition: used, Year of construction: 1985, pressure 40 t Nkedpfx Aevzxrpsgnju stroke 500 mm throat 360 mm dayligth 1000 mm table surface area 630 x 500 mm table height over floor 1060 / 720 mm ram surface 450 x 360 mm feed down 60 mm/s feed up 300 mm/s power requirement 7,5 kW Weight 2,75 t dimensions of the machine ca. 1,0 x 1,8 x 3,05 mxmxm hole in the table 200 mm permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with oil-hydraulic drive, intermediate plate (height 340 mm) as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: used, Year of construction: 1997, pressure 40 t throat 300 mm stroke 630 mm dayligth 900 mm table surface area 620 x 520 mm Nkedpfx Aovuuckogneu hole in the table 150 mm table height over floor 600 mm ram surface 150 mm total power requirement 15,0 kW weight of the machine ca. 4,5 t required space 1,0 x 1,9 x 3,0 m permitted for manual loading according to the CE Regulations with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation press can be inspected in running condition in our warehouse

Condition: ready for operation (used), Year of construction: 1992, Available immediately from location: Edelhoff Hydraulic Single Column Press Type HEP 45 Year of manufacture 1992 Machine complies with the latest accident prevention regulations Pressure capacity 45 tons Table 1000 x 1000 mm Nkedsyl T Ttspfx Agnju Stroke 300 mm Drive 7.5 kW Weight 6 tons Price: €5,000 plus VAT, ex location

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, total height: 2,620 mm, total width: 850 mm, total length: 1,869 mm, pressing force: 30 t, table width: 600 mm, table length: 600 mm, overall weight: 2,900 kg, Weight approx. 2,900 kg Table top size 600x600x100 mm, plus 50 mm free space behind the top up to the back of the press Nodpfevhcykox Agnsku Fixing points of the table in 600, 800, 1000 mm. Ram travel 400 mm Motor 3 KW 60 liter hydraulic tank Speed downwards 10 mm/sec. Upwards 24 mm/second

Condition: used, Year of construction: 2003, pressure . t throat . mm Nodpfx Aow Syfcjgnjku stroke . mm pressure capacity max. 63 t total power requirement . kW weight of the machine ca. 4 t

Condition: used, Year of construction: 1960, pressure 1000 t stroke 600 mm weight of the machine ca. 4 t Nksdpfjw Syd Eox Agnou

Condition: used, Slightly used! Nkjdsyizgispfx Agnju

Year of construction: 1970, condition: used, machine/vehicle number: 12469, Hydraulic press, single-column quick-cycle press, C-column press, oil-hydraulic press Njdpfx Aeb A Tcfsgnsku - Press force ram: 40 to -Clamping table: 800 x 560 mm -Insertion height: 750 mm - Projection: 300 mm -Max. Stroke: 350mm -Operation: two-handed -Dimensions: 1700/1350/H3200 mm -Weight: about 5000 kg

Condition: used, Hydraulic press, oil hydraulic press, pressing machine, pressing tool, pressing pliers -Hydraulic press: Hydraulic unit novopress type WK 9483 -Pressure: max. 150 bar / 0.45 l/min Nksdpfx Ageix Rchsneu -with punch set: 1x Ø 18mm, 2x Ø 14mm, 1x Ø11 mm, 1x Ø 9mm -Operation: foot pedal -Connection hoses: for pressing tongs or similar -Dimensions: 850/550/H1250mm -Weight: 158 kg

Condition: good (used), Hydraulic press, single-column press, C-column press, oil-hydraulic press, hydraulic single-column press Nedpfx Agsupbdgsnjku -Handover: in its current condition as inspected -Note: without hydraulic unit and control system -Pressing force: 40 tons -Piston rod: Ø 105 mm -Max. stroke: 710 mm -Mounting plate: 550 x 800 x 45 mm -Mounting plate holes: Ø 18 mm -Dimensions: 890/1570/H610 mm -Weight: 826 kg

Condition: used, Year of construction: 1985, Nominal pressing force: 40 t Ram stroke: 500 mm Clamping height: 710 mm Nkjdpfjxm R Ivox Agneu Table size: 630 mm Ram outreach from frame: 320 mm Ram speed: - idle 125 mm/s, - pressing 16 mm/s, return 315 mm/s Machine is connected to power and operational

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 2,085 mm, total width: 1,290 mm, total length: 1,160 mm, pressing force: 50 t, table width: 700 mm, table length: 450 mm, overall weight: 1,750 kg, working height: 850 mm, pressure: 320 bar, Equipment: documentation/manual, safety light barrier, The motorized hydraulic C-frame presses of the CM/NC series have four different powers ranging from 50 to 150 tons. Specially designed for stamping, die cutting, and forming work. The latest generation CM/NC series hydraulic presses have evolved into a versatility of uses, such as the possibility of incorporating these machines into automatic production lines. Model CM-50/NC Power 50 tn Motor power 5,5 kW Throat depth 265 mm Working speed 9,9 mm/s Approach speed 45 mm/s Return speed 60 mm/s Maximum pressure 320 bar Piston stroke 250 mm Nkjdpswphvrjfx Agnju Lower table 700×450 mm Upper table 550×300 mm Maximum vertical light 400 mm Working height 850 mm Total front 1.160 mm Total lateral 1.290 mm Total height 2.085 mm Weight 1.750 kg

Condition: good (used), Year of construction: 2002, functionality: fully functional, total height: 3,600 mm, table height: 850 mm, installation height: 500 mm, total width: 1,200 mm, total length: 1,500 mm, throat depth: 250 mm, pressing force: 50 t, table width: 800 mm, table length: 500 mm, overall weight: 4,400 kg, Hydraulic C-frame press, capacity 50 to, table size 800x500 mm, stroke 500 mm, motor 22 kw, dimension 1200x1500x3600 mm, weight ca. 4500 kgs; 2-hand-operation, light-barrier-security Njdpjt Ri A Tofx Agnjku

Condition: good (used), C-frame press Capacity unknown, estimated pressing force 40 tons Maximum workpiece height: 250 mm Throat depth: 510 mm Stroke: 250 mm Weight: 3000 kg Stroke up and down adjustable via limit switches Note: The information on this page has been obtained and compiled to the best of our knowledge, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we advise you to verify all relevant details. Financial information Nedpox A Tygofx Agnoku VAT/margin: VAT: The shown price is excluding VAT (VAT deductible for businesses)

Year of construction: 1992, condition: good (used), H Bret press Type: PPH 30 Capacity: 30 T Bed: 345 x 1345 mm Year: 1992 Dimensions: 160x115x256 cm LxWxH Included control unit and documentation Nksdpfx Agjiuc Nwsneu Turn over to pressbrake possible!

Year of construction: 1992, condition: used, pressure 30 t throat max. 250 mm stroke max. 200 mm power stroke 20 mm dayligth 475 mm Nkedpfephvl Nox Agnsu table surface area 550 x 500 mm weight of the machine ca. 2050 kg

Condition: used, Year of construction: 2015, pressure 30 t throat 250 mm table-size 650 x 500 mm stroke 400 mm dayligth min. 120 / max. 500 mm Control Simatic HMI Touch Siemens total power requirement 13 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 2,5 x 1,70 x 2,85 m Setup mode and single stroke operating mode Machine light Two side tables with a support surface of 850x500mm Nedpfx Aexz Hfmegnsku with hydraulic ball bars for heavy workpieces

Condition: used, Year of construction: 2015, pressure 30 t throat 250 mm table-size 650 x 500 mm stroke 400 mm dayligth min. 120 / max. 500 mm Nkedpfx Aew D Hiasgnou Control Simatic HMI Touch Siemens total power requirement 13 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 2,5 x 1,70 x 2,85 m Setup mode and single stroke operating mode Two side tables with a support surface of 850x500mm with hydraulic ball bars for heavy workpieces

Year of construction: 2001, condition: good (used), Offer 20202 Njdsp Dt Taspfx Agnjku Technical data: - max. pressing force 35 t - projection to the center of the ram 240 mm - working height adjustable with hand crank 540 to 940 mm - 2 hand controls - protective screen enclosure with light barrier - material - insertion device - pneumatic connection - Press control via SIEMENS SIMATEC OP 7 - drive 400 V / 15,5 kW - Space requirement approx. W 1200 x H 2000 x D 2400 mm - Weight approx. 2500 kg

Condition: new, pressure: 40stroke: 500table area: 700x500daylight: 600rapid traverse: 26working speed: 9motor: 4Features:Two-stage hydraulic pump – integrated into the machine frame Njdpfx Agewwx Arsnsku Lever and push-button control – with simultaneous two-hand operation for safety Cylinder stroke: 500 mm – suitable for a wide range of applications Milled lower worktable – solid and precision-machined Two working speeds – for fast yet accurate operation Adjustable maximum pressure – adaptable to different tasks Integrated pressure gauge – for precise pressure monitoring during operation

Condition: new, pressure: 150stroke: 500table area: 800x600daylight: 630rapid traverse: 22working speed: 3motor: 4messurements (LxWxH): 1800 x 1200 x 2400weight approx.: 4500Features:Two-stage hydraulic pump – integrated into the machine frame Lever and push-button control – with simultaneous two-hand operation for safety Cylinder stroke: 500 mm – suitable for a wide range of applications Milled lower worktable – solid and precision-machined Two working speeds – for fast yet accurate operation Adjustable maximum pressure – adaptable to different tasks Integrated pressure gauge – for precise pressure monitoring during operation Nkedpfewwx Afex Agnou

Condition: new, pressure: 200stroke: 500table area: 1000 x 600daylight: 640rapid traverse: 21working speed: 2motor: 5.5messurements (LxWxH): 1800 x 1300 x 2500weight approx.: 6400Features:Two-stage hydraulic pump – integrated into the machine frame Lever and push-button control – with simultaneous two-hand operation for safety Nkjdpfx Aswwx Aljgneu Cylinder stroke: 500 mm – suitable for a wide range of applications Milled lower worktable – solid and precision-machined Two working speeds – for fast yet accurate operation Adjustable maximum pressure – adaptable to different tasks Integrated pressure gauge – for precise pressure monitoring during operation

Condition: new, pressure: 70stroke: 500table area: 700x500daylight: 600rapid traverse: 25working speed: 5motor: 4messurements (LxWxH): 1400 x 900 x 2250weight approx.: 1900Features:Two-stage hydraulic pump – integrated into the machine frame Nodpfx Aowwx Axjgnjku Lever and push-button control – with simultaneous two-hand operation for safety Cylinder stroke: 500 mm – suitable for a wide range of applications Milled lower worktable – solid and precision-machined Two working speeds – for fast yet accurate operation Adjustable maximum pressure – adaptable to different tasks Integrated pressure gauge – for precise pressure monitoring during operation

Condition: new, die cushion stroke: 200 Njdpjd Ab Ikjfx Agnjku