Used Hydraulic single column presses 16-25t for sale (21)

Year of construction: 1986, Condition: like new (used), Used PJ Hare ltd C frame hydraulic press for sale: Pj Hare Limited hydraulic press for sale PRESS MODEL: 25HP Bwslshcfyuoqxlg Tjl Overall Height MM: 2425 Overall Width MM: 1120 Overall Depth MM: 1470 Weight KG: 2000 Fixing Hole dio. MM: 18 Fixing Hole Centres MM x MM: 610 x 1108 Fixing Pad Size: MM x MM: 120 x 250 Oil Capacity L: 50 Air Supply Pressure Max bar: 6 Air Supply Pressure Min bar: 4 Main Motor Power kw: 7.5 Motor Fuse Rating A: 20 Complete with cushion Electrical Supply Details: Minimum Fuse Rating A: 35 Minimum Conductor Size mm: 2.5 PAGE 2: Model 25HP: Capacity Tons: 25 Capacity KN: 250 Ram Force Tons: 3.1 Ram Advance Speed: 425 Ram Pressing Speed: 35.1 Ram return Speed;289 Motor Racing KW:7.5 Weight KG Approx: 2000 Max Stroke: 150 Guard Aperture Width: 680 Guard Aperture Height: 300 Min. Shut Height: 200 Max. Daylight: 450 Shut Height Adjustment: 100 Throat Depth: 250 Bed Height: 900 Bed Width: 650 Bed Depth: 480 Front to Centre Line: 250 Clearance hole dia: 150 Clearance under bed: 350/ 250 Tee Slot Details: 18,15,34,33 Bed Thickness: 95 Side Chute Width: – Vert Chute Width: 255 Hole in Throat Width: 250 Hole in Throat Height: 250 Top Platen Width: 420 Top Platen Depth: 220 Top Platen Fixing Hole Details: 370, 170, 13 Tool Holder dia: 40 Tool Holder Length: 65 Fixing Hole dia: 18 Overall Depth: 1400 Overall Width: 900 Overall Height: 2450 Fixing Hole Centres: 1110 Hare presses for sale New c and h frame hydraulic presses for sale

Condition: used, pressure 25 t stroke 500 mm throat 355 mm dayligth 800 mm Bwelqxlgsvzxq Sj Tel table surface area 500 x 500 mm table height over floor 700 mm ram surface 250 x 250 mm power requirement 7,5 kW Weight 2,1 t dimensions of the machine ca. 1,45 x 0,9 x 2,55 mxmxm hole in the table 180 mm permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with oil-hydraulic drive as is where is, WITHOUT putting into operation, in given condition

Condition: good (used), Year of construction: 1988, machine/vehicle number: 053-019/35, Offer 24591 Technical specifications: - Maximum press force 25 t - Maximum ram stroke 500 mm - Stroke speed 0 - 40 mm/s - Return stroke 0 - 200 m/min - Installation height 800 mm - Throat to ram center 360 mm Belqxljwd Nybsg Tewl - Ram clamping area 440 x 360 mm - Ram clamping pin 40 mm - Table size 630 x 500 mm - Table height above floor 710 mm - Deep drawing force 10 t - Maximum deep drawing depth 160 mm - Drive 400 V / 4 kW - Space requirement approx. W 800 x H 2720 x D 1150 mm - Weight approx. 2500 kg

Condition: refurbished (used), Year of construction: 1986, Functionality: fully functional, 3 axes, 25 tons per 700mm, completely overhauled, new numerical control, hydraulic clamping, 1 set of ve12 or 16 + straight punch P5-155-30 (new and split) included with EXW delivery Bolswfxu Roqxlg Tswl

Condition: used, Single column hydraulic press SCHULZ type SES 250 . 04.86.3511/3 year of construction 1986 pressure force 25 ton. retraction force 10 ton throat 360 mm table area 600 x 720 mm ram area 500 x 500 mm drop-through hole in table Ø 100 mm clamping spigot hole Ø 40 mm ram stroke 400 mm Installation height max. 600 mm Table height above floor 935 / 775 mm Tank capacity hydraulics 380 liters drive power 7,5 kW Mains connection 380 Volt, 50 Hz - Fixed stop adjustment in press cylinder 180 mm - Light barrier SICK Bwelqxshl Npqslg Tel - 2-hand operation - Substructure made of 160 mm U-steel Space requirement L x W x H 1900 x 1300 x 3100 / 3260 mm weight 3,6 ton. good condition

Condition: used, Year of construction: 1988, pressure 6,3 t throat 200 mm stroke 200 mm dayligth 600 mm total power requirement 2,2 kW weight of the machine ca. 0,78 t Hydraulic Press 63 kN Bwslqxlouc Al Rjg Tsl Stroke 200 mm, Throat 200 mm, feed rate: down 165 (28) mm/s, up 510 mm/s. Wheight 780 kg. Workspace: Table 450 x 380 Drive: 2.2 Movie: ?v=tcxXfKlrFLY

Condition: like new (used), Year of construction: 2023, Functionality: fully functional, total height: 2,400 mm, total width: 1,500 mm, total length: 2,400 mm, pressing force: 20 t, overall weight: 2,000 kg, type of input current: three-phase, control cabinet width: 80 mm, input voltage: 400 V, control cabinet length: 60 mm, power: 22 kW (29.91 HP), input current: 32 A, ambient temperature (min.): 10 °C, ambient temperature (max.): 40 °C, height adjustment type: hydraulic, motor voltage: 400 V, type of motor: three-phase motor, Equipment: documentation/manual, If the press does not exactly match your requirements profile, please click here to request a customized offer tailored to your needs: Contact us for a customized quote HIDROBRASIL manufactures presses to your exact specifications at surprisingly competitive prices! ##### 20 T tablet press, single column press, C-press, manual insertion press Machine type: Hydraulic single-column press Year of manufacture: 2023 Location: Gelsenkirchen, Germany Technical specifications: - Pressing force: max. 20 tons (at 250 bar) - Free tearing force: max. 20 kN Bwolqxlgstv Ewdj Tjl - Pressure build-up time: max. 2 seconds (closed tool steel on steel) - Maximum opening width: 500 mm - Stroke and minimum opening: 400/100 mm - Table height above floor: 800 mm - Total height: approx. 2400 mm - Hall height: at least 3,500 mm - Parallel deviation: +/- 0.1 mm at 20 °C - Deflection: 0.3 mm/m (at max. clamping force with 70 % occupancy) - Total weight: approx. 2 tons - Travel speeds: Fast closing 120 mm/s, pressing speed 10 - 5 mm/s - Sound pressure level: max. 78 dB(A) measured at a height of 15 m at the control panel in accordance with DIN 45635-T16-KL3 - Hydraulics: - Number of pressing cylinders: 1 pc. - Operating pressure: max. 250 bar - Pressure accuracy during the pressing stroke: +/- 5 bar - Main pump: Gear pump approx. 10 l/min - Oil volume: approx. 150 liters (HLP 46 MW) - Ambient temperature: max. 40°C - Oil temperature: max. 55°C - Electrical system: - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor: 22 kW - Total connection: approx. 6 kW - Switch cabinet: - Protection class: IP 54 - Reserve space: approx. 20% - Cooling: no - Interior lighting: no - Operating mode switch: lockable Features: - Light barrier: SICK/PILZ/SCHMERSAL - Position adjustment: via adjustable sensors - Pressure setting: 5 T to 20 T, adjustable via rotary control - Two-hand operation: standard, optional foot operation available - Table top: as a tray with 50 mm high edge and side drain - Control cabinet: on the right of the press, IP 54 protection class Function and operation: - Activation: via main switch - Pressure setting: via rotary control - Cycle activation: via two-hand operation or optional foot pedal - Safety features: in accordance with EU standards and UVV regulations Special features: - Crimping tool components: Upper tool with 8 pressing pistons, 3-part lower tool - Pressing cycle: can produce 8-12 pressed parts per minute - Hydraulic unit: can be completely dismantled for maintenance work Service and warranty: - Monitoring and testing: in accordance with DIN ISO 16092-3-2018 - Customer service: from Waibstadt or Gelsenkirchen - Documentation: in accordance with CE standards --- Are you looking for a customized machine? Contact us for a customized offer.

Condition: used, Year of construction: 1988, pressure 25 t stroke 1000 mm throat 400 mm dayligth 1100 mm table surface area 620 x 620 mm table height over floor 650 mm ram surface 110 mm feed down 300 mm/s feed up 500 mm/s Belqjvuub Hoxlg Tjwl working feed 14 - 85 mm/s oil volume 400 l power requirement 6,0 kW Weight 3,8 t dimensions of the machine ca. 1,5 x 2,1 x 3,9 mxmxm hole in the table 80 mm permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, delicate foot-pedal control

Condition: used, Year of construction: 1976, pressure 20 t throat 185 mm stroke 100 mm table surface area 380 x 350 mm dayligth 250 mm Bwjlqxstqqwuolg Tol table height over floor 840 mm total power requirement 4 kW weight of the machine ca. 1,3 t

Condition: used, Year of construction: 1980, . 52965 pressure 10 t oil contents 110 Liter Bwslsvxlr Dsqxlg Tol +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1953, pressure 25 t throat 250 mm stroke 500 mm table-size 140x300 mm Height of centres 150 mm total power requirement 6 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 3500 x 1400 x 2800 mm Bolqxlju Uu Tdog Tswl Shaft straightener 4 m Center height of shaft straightener 150 mm Suitable for shafts 300 mm diameter Max. permissible closing speed of the ram according to Accident prevention regulations 11.064 Hydraulic presses 25mm/s

Condition: excellent (used), Year of construction: 1990, Functionality: fully functional, total height: 27,500 mm, total width: 10,500 mm, total length: 16,500 mm, pressing force: 25 t, table width: 630 mm, table length: 500 mm, operating speed: 100 mm/s, overall weight: 2,200 kg, reverse speed: 450 mm/s, ram plate width: 450 mm, ram plate length: 360 mm, ram stroke: 500 mm, die cushion stroke: 160 mm, clearance between the columns: 800 mm, power: 8.75 kW (11.90 HP), PYE 25 S1M hydraulic press with ejector. Year of manufacture 1990. manufacturer VEB Wema Zeulenroda (Germany). Parameters: Maximum pressing force 25 tons. Working pressure 16 MPa. Bjlqxljtzwxdjg Tewl Upper table 450 x 360 mm. Lower table 630 x 500 mm. Ground clearance 800 mm. Cylinder stroke 500 mm. Down speed 100 mm/sec. Upward speed 450 mm/sec. Ejector force 10 tons. Ejector stroke 160 mm. Power requirement 8,75 kW. Weight 2200kg. Height 2750mm, length 1650mm, width 1050mm. Technical condition of the machine very good. The machine after a general overhaul. It is possible to make a visual inspection and check the machine in motion.

Condition: like new (used), Year of construction: 2024, Here are the technical data of the machine on offer: If the press does not exactly match your requirements, please request an individual offer tailored to your needs with one click: Contact us for an individual offer HIDROBRASIL manufactures presses tailored to your needs at surprisingly low prices! ##### Technical data + information: Bwelqxljv A Tbhjg Tel ME 2025-A-041 20 T assembly press, 500x400mm table top, Round press plate with 250 mm diameter on the press piston a) Robust machine frame, b) Control cabinet technology from renowned manufacturers c) Pump from the German manufacturer Agro-Hytos d) Table size of the press table 500x400x50 mm e) Table height 1100 mm, from the hall floor f) Ram size, around 250mm diameter, replaceable g) Emergency switch h) Maximum distance between table top and ram 500 mm i) Cylinder travel 250 mm j) Motor power 2.2 KW k) Oil tank for 60 L hydraulic oil l) Travel speed downwards 2-10 mm, (adjustable via a rotary control upwards 20 mm second m) Total weight approx. 1300 kg n) Painting in RAL (light gray) 7035 and RAL 2009 (orange) o) Assembly, commissioning, instruction for a separate fee (C-press, hydraulic press, hydraulic press, single column press) ##### Are you looking for a machine that fits your needs? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German machinery guidelines, European machinery guidelines (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply in all respects with the national Brazilian safety directive NR 12, which is based on these. Our great strength is special machine construction and press automation. We sell customized hydraulic presses, press brakes and shears at surprisingly low prices. The hydraulics of the presses are mainly made using components from leading European manufacturers.

Condition: used, Year of construction: 2000, pressure 25 t stroke 150 mm throat 420 mm dayligth 450 mm table surface area 700 x 820 mm table height over floor 850 mm ram surface 600 x 600 mm Bolqsvut N Njxlg Tewl feed down 370 mm/s feed up 370 mm/s working feed 18 - 33 mm/s oil volume 300 l power requirement 5,5 kW Weight 5,8 t dimensions of the machine ca. 1,1 x 2,0 x 2,4 mxmxm permitted for manual loading according to the CE-norm with oil-hydraulic drive, controllable dependent on pressure/time and way, cutting impact cushioning, mechanical depth stop, two-hand operation

Condition: used, Table size: 630 x 490 mm Stroke length: 500 mm Belov S Uyqoqxlg Tjwl Max. thrust: 500 mm

Condition: used, Year of construction: 1991, pressure 20 t distance between columns 400 mm stroke 250 mm total power requirement 5,5 kW Bjlqxlgovwgwxe Tswl weight of the machine ca. 4 t dimensions of the machine ca. 3 * 1,5 * 2,4 m

Condition: new, Year of construction: 2024, Functionality: fully functional, total height: 23,000 mm, total width: 7,800 mm, total length: 10,400 mm, pressing force: 25 t, table width: 780 mm, table length: 200 mm, operating speed: 13 mm/s, reverse speed: 24 mm/s, stroke distance: 480 mm, operating pressure: 230 bar, oil tank capacity: 20 l, power: 3 kW (4.08 HP), MULTI-INZETABLE workshop / brooder press Available in both 20 and 25 tons. BAR-MAN 20: 3300 euro BAR-MAN 25: 3860 euro Bwjlqxlgot A Dzne Tel The BAR-MAN can be used for a wide variety of purposes. Think of maintenance work, cutting keyways, pressing in and out of bearings and much more. With this powerhouse you can do anything, while still working in comfort.

Condition: excellent (used), Year of construction: 1977, Functionality: fully functional, total height: 27,500 mm, total width: 10,500 mm, total length: 16,500 mm, pressing force: 25 t, table width: 630 mm, table length: 500 mm, operating speed: 200 mm/s, overall weight: 2,400 kg, reverse speed: 450 mm/s, ram plate width: 450 mm, ram plate length: 360 mm, ram stroke: 500 mm, distance between stands: 800 mm, power: 12.5 kW (17.00 HP), PYE 25 SS hydraulic press. Year of manufacture 1977. manufacturer VEB Wema Zeulenroda (Germany). Parameters: Maximum pressing force 25 tons. Working pressure 16 MPa. Upper table 450 x 360 mm. Lower table 630 x 500 mm. Ground clearance 800 mm. Cylinder stroke 500 mm. Down speed 200 mm/sec. Upward speed 450 mm/sec. Power requirement 12,5 kW. Weight 2400kg. Height 2750mm, length 1650mm, width 1050mm. Technical condition of the machine very good. The machine after a general overhaul. Bolqjtzxvwsxlg Tewl It is possible to make a visual inspection and check the machine in motion.

Condition: new, Year of construction: 2019, machine/vehicle number: DF0287, pressure:25 t passage width:1000 mm stroke:800 mm Weight of machine approx.:4 t dimensions:ca. 2054 x 2200 x 3126 mm return capacity:2 t :5 kW Max Working height:800 mm :80 mm/sec :10 mm/sec. :80 mm/sec :800 mm pestle plate:400 x 400 mm table plate:1000 x 800 mm table height over floor:850 mm Table cut-out:650 x 150 mm :200 l pestle is stabilized by 4 per ø 50 mm chrome-plated linear guides:Bronzeführungen pestle strength:122 mm Steel plate on spring rolls:600 x 400 x 15 mm Bslofxyikeqxlg Tswl :S7 1200 Lightcurtains by Schmersal:1800 mm ab Boden Monitor:SIEMENS 10 Zoll Installation table on the left of the machine body with 10mm thick plage-milled steel plates:1000 x 800, 850 hoch mm

Condition: excellent (used), Year of construction: 1990, Force 25tons Throat 160mm Daylight 500mm Table size 650x650mm Ram size round 140mm Stroke 130mm requested power 4 KW Weight 2000Kg height 2100mm width 1100mm Bslqxefcw Apelg Tjwl depth 1500mm

Condition: used, Single-column hydraulic press HYDRAP type HPSK 25 No. 6312 Year of construction 1989 Pressure force 25 ton. Ram stroke 500 mm Bwolqxlgshrakvj Tsl throat depth 300 mm Installation height 700 mm Table surface 1000 x 500 mm Table bore Ø 210 mm Plunger surface 400 x 360 mm Clamping pin bore Ø 40 mm Table height above floor 855 mm Feed speed in rapid traverse 280 mm/sec. Pressing speed 3.5 mm/sec. to 25 mm/sec. Return speed 280 mm/sec. Hydraulic tank capacity 240 liters Drive power 7.5 kW Mains connection 400 Volt, 50 Hz. - Operation and programming via SIEMENS S5 with OP1 control system - Measuring system for stroke adjustment - Pressing speed infinitely variable via potentiometer - Pressure setting infinitely adjustable manually via pressure regulator - Short stroke device - Mechanical tool clamping on ram with T-slots and clamping pin hole - Switch cabinet with electrical control on the machine - Two-hand operation and electrical connection for foot control - Control provided for electrical mold monitoring - Hydraulic diagram and electrical diagram available Space requirement L x W x H 1800 x 1200 x 2930 mm Weight approx. 4 tons good condition